Near‐IR BODIPY Dyes à la Carte—Programmed Orthogonal Functionalization of Rationally Designed Building Blocks

Herein, we report the synthesis of polyfunctional BODIPY building blocks suitable to be subjected to several reaction sequences with complete chemoselectivity, thereby allowing the preparation of complex BODIPY derivatives in a versatile and programmable manner. The reactions included the Liebeskind–Srogl cross‐coupling reaction (LSCC), nucleophilic aromatic substitution (S_NAr), Suzuki, Sonogashira, and Stille couplings, and a desulfitative reduction of the MeS group. This novel synthetic protocol is a powerful route to design a library of compounds with tailored photophysical properties for advanced applications. In this context, it is noteworthy that it offers a straightforward and cost‐effective strategy to shift the BODIPY emission deep into the near‐infrared spectral region while retaining high fluorescence quantum yields as well as highly efficient and stable laser action. These new dyes outperform the lasing behaviour of dyes considered as benchmarks over the red spectral region, overcoming the important drawbacks associated with these commercial laser dyes, namely low absorption at the standard pump wavelengths (355 and 532 nm) and/or poor photostability.     

meso‐Ester and Carboxylic Acid Substituted BODIPYs with Far‐Red and Near‐Infrared Emission for Bioimaging Applications

A series of meso‐ester‐substituted BODIPY derivatives 1–6 are synthesized and characterized. In particular, dyes functionalized with oligo(ethylene glycol) ether styryl or naphthalene vinylene groups at the α positions of the BODIPY core ( 3 – 6 ) become partially soluble in water, and their absorptions and emissions are located in the far‐red or near‐infrared region. Three synthetic approaches are attempted to access the meso‐carboxylic acid (COOH)‐substituted BODIPYs 7 and 8 from the meso‐ester‐substituted BODIPYs. Two feasible synthetic routes are developed successfully, including one short route with only three steps. The meso‐COOH‐substituted BODIPY 7 is completely soluble in pure water, and its fluorescence maximum reaches around 650 nm with a fluorescence quantum yield of up to 15 %. Time‐dependent density functional theory calculations are conducted to understand the structure–optical properties relationship, and it is revealed that the Stokes shift is dependent mainly on the geometric change from the ground state to the first excited singlet state. Furthermore, cell staining tests demonstrate that the meso‐ester‐substituted BODIPYs ( 1 and 3 – 6 ) and one of the meso‐COOH‐substituted BODIPYs ( 8 ) are very membrane‐permeable. These features make these meso‐ester‐ and meso‐COOH‐substituted BODIPY dyes attractive for bioimaging and biolabeling applications in living cells.     

Blue‐to‐Orange Color‐Tunable Laser Emission from Tailored Boron‐Dipyrromethene Dyes

A series of meso‐substituted boron‐bipyrromethene (BODIPY) dyes are synthesized and their laser and photophysical properties systematically studied. Laser emission covering a wide visible spectral region (from blue to orange) is obtained by just changing the electron donor character of the heteroatom at position 8. The additional presence of methyl groups at positions 3 and 5 results in dyes with a photostability similar to that of the unsubstituted dye but with much improved efficiency. Correlation of the lasing properties of the different dyes to their photophysical properties provides inklings to define synthetic strategies of new BODIPY dyes with enhanced efficiency and modulated wavelength emission over the visible spectral region.     

Synthesis and characterization of MgO nanoparticles supported on ionic liquid‐based periodic mesoporous organosilica (MgO@PMO‐IL) as a highly efficient and reusable nanocatalyst for the synthesis of novel spirooxindole‐furan derivatives

The synthesis and catalytic application of a novel MgO containing periodic mesoporous organosilica with ionic liquid framework (MgO@PMO‐IL) is described. The prepared MgO@PMO‐IL was characterized by Fourier transform‐infrared spectroscopy, N₂ adsorption/desorption, transmission electron microscopy, field emission‐scanning electron microscopy, thermogravimetric and inductively coupled plasma analyses. This nanocatalyst was successfully applied as a highly efficient and recoverable catalyst for the synthesis of novel spirooxindole‐furan derivatives via the three‐component reaction of 1,3‐dicarbonyl compounds, N‐phenacyl pyridinium salts and isatin derivatives. The products were achieved in high to excellent yields with a simple work‐up procedure and short reaction times, and the catalyst could be recovered through a simple filtration process and successfully reused seven times without any significant decrease in its efficiency.     

Synthesis and [3+2] cycloaddition reaction of 3‐[(trimethylsilylmethylamino)(methylthio)‐methylene]heterocyclic compounds

3‐[(Trimethylsilylmethylamino)(methylthio)]methylene‐2‐coumaranone ( 4a ) and 1‐methyloxindole ( 4b ), readily prepared by reactions of the corresponding bis(methylthio)methylene heterocyclic compounds ( 2a, b ), with (trimethylsilylmethyl)amine (3), were found to be synthetic equivalents of heterocyclic alkylidene‐azomethine ylides. Reactions of 4a, b with reactive heterodipolarophiles such as aldehydes and ketones and reactive alkenes in the presence of cesium fluoride gave the 1,3‐dipolar cycloadducts, 3‐(2‐oxazoli‐dinylidene)‐oxindole and ‐coumaran‐2‐one derivatives ( 8a‐j, 9a‐h ), as well as pyrrolylidenecoumaran‐2‐one and oxindole derivatives ( 12‐15,17,18 ), via the 1,3‐elimination of (methylthio)trimethylsilane.     

Methanesulfonic Acid‐Catalyzed One‐Pot Synthesis of 12‐Aryl or 12‐Alkyl‐8,9,10,12‐tetrahydrobenzo[a]xanthen‐11‐one Derivatives

An efficient synthesis of 12‐aryl or 12‐alkyl‐8,9,10,12‐tetrahydrobenzo[a]xanthen‐11‐one derivatives has been developed under solvent‐free conditions by one‐pot condensation of aldehydes, 2‐naphthol, and cyclic 1,3‐dicarbonyl compounds in the presence of a catalytic amount of methanesulfonic acid. The protocol has advantages of mild condition, short reaction time, high yield, and operational simplicity.     

Three‐Component Uncatalyzed Eco‐Friendly Reactions for One‐Pot Synthesis of 4,7‐Dihydro[1,2,4]triazolo[1,5‐a]pyrimidine Derivatives

A three‐component system of one‐pot synthesis of [1,2,4]triazolo[1,5‐a]pyrimidine derivatives using condensation of 1,3‐dicarbonyl compounds, aldehydes, and 5‐amino[1,2,4]triazole in ethanol without any catalyst was reported in high yields via simple, efficient, and environmentally friendly process. The method reported herein considered a green process; this method has significant advantages of simple workup procedure, excellent yield, minimal environmental pollution, and short reaction time over classical reported methods.     

New 8-amino-BODIPY derivatives: surpassing laser dyes at blue-edge wavelengths

The development of highly efficient and stable blue‐emitting dyes to overcome some of the most important shortcomings of available chromophores is of great technological importance for modern optical, analytical, electronic, and biological applications. Here, we report the design, synthesis and characterization of new tailor‐made BODIPY dyes with efficient absorption and emission in the blue spectral region. The major challenge is the effective management of the electron‐donor strength of the substitution pattern, in order to modulate the emission of these novel dyes over a wide spectral range (430–500 nm). A direct relationship between the electron‐donor character of the substituent and the extension of the spectral hypsochromic shift is seen through the energy increase of the LUMO state. However, when the electron‐donor character of the substituent is high enough, an intramolecular charge‐transfer process appears to decrease the fluorescence ability of these dyes, especially in polar media. Some of the reported novel BODIPY dyes provide very high fluorescence quantum yields, close to unity, and large Stokes shifts, leading to highly efficient tunable dye lasers in the blue part of the spectrum; this so far remains an unexploited region with BODIPYs. In fact, under demanding transversal pumping conditions, the new dyes lase with unexpectedly high lasing efficiencies of up to 63 %, and also show high photostabilities, outperforming the laser action of other dyes considered as benchmarks in the same spectral region. Considering the easy synthetic protocol and the wide variety of possible substituents, we are confident that this strategy could be successfully extended for the development of efficient blue‐edge emitting materials and devices, impelling biophotonic and optoelectronic applications.     

Selective Benzylic and Allylic Alkylation of Protic Nucleophiles with Sulfonamides through Double Lewis Acid Catalyzed Cleavage of sp3 Carbon–Nitrogen Bonds

The acid‐catalyzed benzylic and allylic alkylation of protic nucleophiles is fundamentally important for the formation of carbon? carbon and carbon? heteroatom bonds, and it is a formidable challenge for benzylic and allylic amine derivatives to be used as the alkylating agents. Herein we report a highly efficient benzylic and allylic alkylation of protic carbon and sulfur nucleophiles with sulfonamides through double Lewis acid catalyzed cleavage of sp³ carbon–nitrogen bonds at room temperature. In the presence of a catalytic amount of inexpensive ZnCl₂‐TMSCl (TMSCl: chlorotrimethylsilane), 1,3‐diketones, β‐keto esters, β‐keto amides, malononitrile, aromatic compounds, thiols, and thioacetic acid can couple with a broad range of tosyl‐activated benzylic and allylic amines to give diversely functionalized products in good to excellent yields and with high regioselectivity. Furthermore, the cross‐coupling reaction of 1,3‐dicarbonyl compounds with benzylic propargylic amine derivatives has been successfully applied to the one‐step synthesis of polysubstituted furans and benzofurans.     

Water‐Soluble Red‐Emitting Distyryl‐Borondipyrromethene (BODIPY) Dyes for Biolabeling

A series of water‐soluble red‐emitting distyryl‐borondipyrromethene (BODIPY) dyes were designed and synthesized by using three complementary approaches aimed at introducing water‐solubilizing groups on opposite faces of the fluorescent core to reduce or completely suppress self‐aggregation. An additional carboxylic acid functional group was introduced at the pseudo‐meso position of the BODIPY scaffold for conjugation to amine‐containing biomolecules/biopolymers. The optical properties of these dyes were evaluated under simulated physiological conditions (i.e., phosphate‐buffered saline (PBS), pH 7.5) or in pure water. The emission wavelength (λ_max) of these labels was found in the 640–660 nm range with quantum yields from modest to unprecedentedly high values (4 to 38 %). The bioconjugation of these distyryl‐BODIPY dyes with bovine serum albumin (BSA) and the monoclonal antibody (mAb) 12A5 was successfully performed under mild aqueous conditions.     

First Highly Efficient and Photostable E and C Derivatives of 4,4‐Difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) as Dye Lasers in the Liquid Phase,Thin Films,and Solid‐State Rods

A new library of E‐ and C‐4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) derivatives has been synthesized through a straightforward protocol from commercially available BODIPY complexes, and a systematic study of the photophysical properties and laser behavior related to the electronic properties of the B‐substituent group (alkynyl, cyano, vinyl, aryl, and alkyl) has been carried out. The replacement of fluorine atoms by electron‐withdrawing groups enhances the fluorescence response of the dye, whereas electron‐donor groups diminish the fluorescence efficiency. As a consequence, these compounds exhibit enhanced laser action with respect to their parent dyes, both in liquid solution and in the solid phase, with lasing efficiencies under transversal pumping up to 73 % in liquid solution and 53 % in a solid matrix. The new dyes also showed enhanced photostability. In a solid matrix, the derivative of commercial dye PM597 that incorporated cyano groups at the boron center exhibited a very high lasing stability, with the laser emission remaining at the initial level after 100 000 pump pulses in the same position of the sample at a 10 Hz repetition rate. Distributed feedback laser emission was demonstrated with organic films that incorporated parent dye PM597 and its cyano derivative. The films were deposited onto quartz substrates engraved with appropriate periodical structures. The C derivative exhibited a laser threshold lower than that of the parent dye as well as lasing intensities up to three orders of magnitude higher.     

Enantioselective and Regioselective Organocatalytic Conjugate Addition of Malonates to Nitroenynes

The first catalytic asymmetric conjugate addition of 1,3‐dicarbonyl compounds to nitroenynes catalyzed by cinchona alkaloid‐based thiourea organocatalysts has been developed. The 1,4‐addition adducts were obtained solely, in moderate to good yields (up to 93 %) with good enantioselectivities (up to 99 % ee). This protocol affords a conceptually different entry to the precursors of pharmaceutically important chiral β‐alkynyl acid derivatives and synthetically useful chiral nitroalkynes. Notably, the protocol worked well with both aryl‐ and alkyl‐substituted alkynyl substrates.     

α,β‐Double Electrophilic Addition of Allene‐1,3‐Dicarboxylic Esters for the Construction of Polysubstituted Furans by KI/tert‐Butyl Hydroperoxide (TBHP)‐Promoted Oxidative Annulation

An unprecedented KI/tert‐butyl hydroperoxide promoted tandem Michael addition/oxidative annulation of allene‐1,3‐dicarboxylic esters and 1,3‐dicarbonyl compounds has been developed. This procedure provides a new, facile, and transition‐metal‐free synthetic approach to afford polysubstituted furans in moderate to excellent yields (up to 93 %). This method first establishes a α,β‐double electrophilic reaction mode of allene‐1,3‐dicarboxylic esters to form 1,3‐dicarbonyl compounds.     

Development of excellent long-wavelength BODIPY laser dyes with a strategy that combines extending π-conjugation and tuning ICT effect

By comparison and combination of two strategies, extending π-conjugation and tuning Intramolecular Charge Transfer (ICT) effect, new long-wavelength BODIPY dyes have been efficiently synthesized. The new chromophores exhibit good optical properties: high fluorescence quantum yields, exceptionally large molar extinction coefficients, narrow red-emission bands, and relatively large Stokes shifts etc., in polar or apolar solvents. Besides, the new dyes, under transversal pumping at 532 nm, exhibit highly efficient and stable laser emission tunable from the green to NIR spectral region (570-725 nm). Moreover, one of these new BODIPY derivatives shows cell membrane permeability and bright intracellular red fluorescence. These advantageous characteristics assure the potential of these dyes for biophotonic applications.     

Theoretical Insight into the Origin of Large Stokes Shift and Photophysical Properties of Anilido‐Pyridine Boron Difluoride Dyes

The geometric and electronic structures and photophysical properties of anilido‐pyridine boron difluoride dyes 1 – 4 , a series of scarce 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) derivatives with large Stokes shift, are investigated by employing density functional theory (DFT) and time‐dependent DFT (TD‐DFT) calculations to shed light on the origin of their large Stokes shifts. To this end, a suitable functional is first determined based on functional tests and a recently proposed index—the charge‐transfer distance. It is found that PBE0 provides satisfactory overall results. An in‐depth insight into Huang–Rhys (HR) factors, Wiberg bond indices, and transition density matrices is provided to scrutinize the geometric distortions and the character of excited states pertaining to absorption and emission. The results show that the pronounced geometric distortion due to the rotation of unlocked phenyl groups and intramolecular charge transfer are responsible for the large Stokes shift of 1 and 2 , while 3 shows a relatively blue‐shifted emission wavelength due to its mild geometric distortion upon photoemission, although it has a comparable energy gap to 1 . Finally, compound 4 , which is designed to realize the rare red emission in BODIPY derivatives, shows desirable and expected properties, such as high Stokes shift (4847 cm^?1), red emission at 660 nm, and reasonable fluorescence efficiency. These properties give it great potential as an ideal emitter in organic light‐emitting diodes. The theoretical results could complement and assist in the development of BODIPY‐based dyes with both large Stokes shift and high quantum efficiency.     

An efficient one‐pot synthesis of novel pyrimidoquinoline derivatives under microwave irradiation without catalyst

A series of pyrimidoquinoline derivatives were synthesized through one‐pot condensation of 2,6‐diaminopyrimidin‐4‐one, aldehyde and cyclic a 1,3‐dicarbonyl compound in glycol under microwave irradiation without catalyst. The protocol in the absence of catalyst has the advantage of good yield (87‐95%), short reaction time (4‐7 min) and an environmentally friendly technique.     

Thioreductones and Derivatives (G)

Thioreductones and Derivatives . Replacement of one or two (principally also three) O‐atoms in aci‐reductones by sulfur leads to the corresponding thioreductones. In the present paper, different methods of their synthesis are discussed. Substitution of the bromo nucleofug in the 2‐position of 1,3‐dicarbonyl compounds as well as of a 3‐oxosulfone by selected sulfur nucleophiles is assumed to follow an S_RN1 pathway. Characteristic properties, some typical reactions, and selected derivatives were studied. S‐Alkyl‐ and S‐aryl‐substituted cyclic 2‐thioreductones have been found to be synthons for the preparation of vinylogous reductones (2,3‐diacyl‐1,4‐dihydroxy‐1,3‐dienes) and of tetraacyl ethylenes as their bis‐dehydro products.     

N-heterocyclic carbene-catalyzed Michael additions of 1,3-dicarbonyl compounds

A study of the organocatalytic activity of N‐heterocyclic carbenes (NHCs) in the Michael addition of 1,3‐dicarbonyl compounds has allowed us to identify 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr) as an excellent catalyst for this transformation (up to 99 % yield with a 2.5 mol % catalyst loading), and the reaction was found to be of broad scope. Two early applications of this unprecedented catalytic activity of NHCs are described, that is, the domino carbocyclization reactions of simple cyclic 1,3‐dicarbonyl and malonic acid derivatives, which allow stereoselective access to bridged bicyclic compounds, and the stereoselective synthesis of cyclohexanols (or cyclohexene). Early mechanistic investigations are also reported.     

BODIPY‐Bridged Push–Pull Chromophores for Nonlinear Optical Applications

A set of linear and dissymmetric BODIPY‐bridged push–pull dyes are synthesized. The electron‐donating substituents are anisole and dialkylanilino groups. The strongly electron‐accepting moiety, a 1,1,4,4‐tetracyanobuta‐1,3‐diene (TCBD) group, is obtained by insertion of an electron‐rich ethyne into tetracyanoethylene. A nonlinear push–pull system is developed with a donor at the 5‐position of the BODIPY core and the acceptor at the 2‐position. All dyes are fully characterized and their electrochemical, linear and nonlinear optical properties are discussed. The linear optical properties of dialkylamino compounds show strong solvatochromic behavior and undergo drastic changes upon protonation. The strong push–pull systems are non‐fluorescent and the TCBD‐BODIPY dyes show diverse photochemistry and electrochemistry, with several reversible reduction waves for the tetracyanobutadiene moiety. The hyperpolarizability μβ of selected compounds is evaluated using the electric‐field‐induced second‐harmonic generation technique. Two of the TCBD‐BODIPY dyes show particularly high μβ (1.907 μm) values of 2050×10^?48 and 5900×10^?48 esu. In addition, one of these dyes shows a high NLO contrast upon protonation–deprotonation of the donor residue.     

Two π-Electrons Make the Difference: From BODIPY to BODIIM Switchable Fluorescent Dyes

(aza-)BODIPY dyes (boron dipyrromethene dyes) are well-established fluorophores due to their large quantum yields, stability, and diversity, which led to promising applications including imaging techniques, sensors, organic (opto)electronic materials, or biomedical applications. Although the control of the optical properties in (aza-)BODIPY dyes by peripheral functional groups is well studied, we herein present a novel approach to modify the 12 π-electron core of the dipyrromethene scaffold. The replacement of two carbon atoms in the β-position of a BODIPY dye by two nitrogen atoms afforded a 14 π-electron system, which was termed BODIIM (boron diimidazolylmethene) in systematic analogy to the BODIPY dyes. Remarkably, the BODIIM dye was obtained with a BH₂-rigidifying entity, which is currently elusive and highly sought after for the BODIPY dye class. DFT-Calculations confirm the [12+2] π-electron relationship between BODIPY and BODIIM and reveal a strong shape correlation between LUMO in the BODIPY and the HOMO of the BODIIM. The modification of the π-system leads to a dramatic shift of the optical properties, of which the fluorescent emission is most noteworthy and occurs at much larger Stokes shift, that is, ≈500 cm⁻¹ in BODIPY versus >4170 cm⁻¹ in BODIIM system in all solvents investigated. Nucleophilic reactivity was found at the meso-carbon atom in the formation of stable borane adducts with a significant shift of the fluorescent emission, and this behavior contrasts the reactivity of conventional BODIPY systems. In addition, the reverse decomplexation of the borane adducts was demonstrated in reactions with a representative N-heterocyclic carbene to retain the strongly fluorescent BODIIM compound, which suggests applications as fully reversible fluorescent switch.