Direct X‐ray Observation of Trapped CO2 in a Predesigned Porphyrinic Metal–Organic Framework

Metal–organic frameworks (MOFs) are emerging microporous materials that are promising for capture and sequestration of CO₂ due to their tailorable binding properties. However, it remains a grand challenge to pre‐design a MOF with a precise, multivalent binding environment at the molecular level to enhance CO₂ capture. Here, we report the design, synthesis, and direct X‐ray crystallographic observation of a porphyrinic MOF, UNLPF‐2, that contains CO₂‐specific single molecular traps. Assembled from an octatopic porphyrin ligand with [Co₂(COO)₄] paddlewheel clusters, UNLPF‐2 provides an appropriate distance between the coordinatively unsaturated metal centers, which serve as the ideal binding sites for in situ generated CO₂. The coordination of Co^II in the porphyrin macrocycle is crucial and responsible for the formation of the required topology to trap CO₂. By repeatedly releasing and recapturing CO₂, UNLPL‐2 also exhibits recyclability.     

A Robust Metal–Organic Framework for Dynamic Light‐Induced Swing Adsorption of Carbon Dioxide

Adsorbents for CO₂ capture need to demonstrate efficient release. Light‐induced swing adsorption (LISA) is an attractive new method to release captured CO₂ that utilizes solar energy rather than electricity. MOFs, which can be tailored for use in LISA owing to their chemical functionality, are often unstable in moist atmospheres, precluding their use. A MOF is used that can release large quantities of CO₂ via LISA and is resistant to moisture across a large pH range. PCN‐250 undergoes LISA, with UV flux regulating the CO₂ desorption capacity. Furthermore, under UV light, the azo residues within PCN‐250 have constrained, local, structural flexibility. This is dynamic, rapidly switching back to the native state. Reusability tests demonstrate a 7.3 % and 4.9 % loss in both adsorption and LISA capacity after exposure to water for five cycles. These minimal changes confirm the structural robustness of PCN‐250 and its great potential for triggered release applications.     

The Role of Multiwall Carbon Nanotubes in Cu‐BTC Metal‐Organic Frameworks for CO2 Adsorption

The discovery of natural gas fields with a high content of CO₂ in world gas reservoirs poses new challenges for CO₂ capture. This work investigates the use of the metal‐organic framework (MOF) Cu‐BTC and hybrid MWCNTs@Cu‐BTC for CO₂ adsorption. Cu‐BTC and hybrid MWCNTs@Cu‐BTC were synthesized by the solvothermal method. The results of imaging of intact MOF pores in Cu‐BTC and hybrid MWCNTs@Cu‐BTC nanocrystals by high‐resolution transmission electron microscopy (HRTEM) under liquid nitrogen conditions are presented. Physical characterizations of the solid adsorbents were made by using a selection of different techniques, including field‐emission scanning electron microscopy (FESEM), X‐ray powder diffraction (XRD), Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), Brunauer–Emmet–Teller (BET) surface area, and CO₂ adsorption and physisorption measurements. HRTEM and FESEM confirmed that Cu‐BTC has an octahedral shape and that the surface morphology of Cu‐BTC changes by the intercalation of MWCTNs. The results show that the modified Cu‐BTC improved the CO₂ adsorption compared to pure Cu‐BTC. The increase in the CO₂ uptake capabilities of hybrid MWCNTs@Cu‐BTC was ascribed to the intercalation of MWCNTs with Cu‐BTC crystals. The CO₂ sorption capacities of Cu‐BTC and hybrid MWCNTs@Cu‐BTC were found to increase from 1.91701 to 3.25642 mmol/g at ambient conditions.     

Increasing the CO2/N2 Selectivity with a Higher Surface Density of Pyridinic Lewis Basic Sites in Porous Carbon Derived from a Pyridyl‐Ligand‐Based Metal–Organic Framework

The development of functional porous carbon with high CO₂/N₂ selectivity is of great importance for CO₂ capture. In this paper, a type of porous carbon with doped pyridinic sites (termed MOFC) was prepared from the carbonization of a pyridyl‐ligand based MOF. Four MOFCs derived from different carbonizing temperatures were prepared. Structural studies revealed high contents of pyridinic‐N groups and nearly the same pore‐size distributions for these MOFCs. Gas‐sorption studies revealed outstanding CO₂ uptake at low pressures and room temperature. Owing to the high content of pyridinic‐N groups, the CO₂/N₂ selectivity on these MOFCs exhibits values of about 40–50, which are among the top values in carbon materials. Further correlation studies demonstrated that the CO₂/N₂ selectivities show a positive linear relationship with the surface density of pyridinic‐N groups, thus validating the synergistic effect of the doped pyridinic‐N groups on CO₂ adsorption selectivity.     

Enhanced CO2 Adsorption Affinity in a NbO‐type MOF Constructed from a Low‐Cost Diisophthalate Ligand with a Piperazine‐Ring Bridge

A metal–organic framework (NPC‐6) with an NbO topology based on a piperazine ring‐bridged diisophthalate ligand was synthesized and characterized. The incorporated piperazine group leads to an enhanced adsorption affinity for CO₂ in NPC‐6, in which the CO₂ uptake is 4.83 mmol g^?1 at 293 K and 1 bar, ranking among the top values of CO₂ uptake on MOF materials. At 0.15 bar and 293 K, the NPC‐6 adsorbs 1.07 mmol g^?1 of CO₂, which is about 55.1 % higher than that of the analogue MOF NOTT‐101 under the same conditions. The enhanced CO₂ uptake combined with comparable uptakes for CH₄ and N₂ leads to much higher selectivities for CO₂/CH₄ and CO₂/N₂ gas mixtures on NPC‐6 than on NOTT‐101. Furthermore, an N‐alkylation is used in the synthesis of the PDIA ligand, leading to a much lower cost compared with that in the synthesis of ligands in the NOTT series, as the former does not require a palladium‐based catalyst and borate esters. Thus, we conclude that NPC‐6 is a promising candidate for CO₂ capture applications.     

Metal–Organic Gel Material Based on UiO‐66‐NH2 Nanoparticles for Improved Adsorption and Conversion of Carbon Dioxide

Metal–organic frameworks (MOFs) including the UiO‐66 series show potential application in the adsorption and conversion of CO₂. Herein, we report the first tetravalent metal‐based metal–organic gels constructed from Zr^IV and 2‐aminoterephthalic acid (H₂BDC‐NH₂). The ZrBDC‐NH₂ gel materials are based on UiO‐66‐NH₂ nanoparticles and were easily prepared under mild conditions (80 °C for 4.5 h). The ZrBDC‐NH₂‐1:1‐0.2 gel material has a high surface area (up to 1040 m² g^?1) and showed outstanding performance in CO₂ adsorption (by using the dried material) and conversion (by using the wet gel) arising from the combined advantages of the gel and the UiO‐66‐NH₂ MOF. The ZrBDC‐NH₂‐1:1‐0.2 dried material showed 38 % higher capture capacity for CO₂ at 298 K than microcrystalline UiO‐66‐NH₂. It showed high ideal adsorbed solution theory selectivity (71.6 at 298 K) for a CO₂/N₂ gas mixture (molar ratio 15:85). Furthermore, the ZrBDC‐NH₂‐1:1‐0.2 gel showed activity as a heterogeneous catalyst in the chemical fixation of CO₂ and an excellent catalytic performance was achieved for the cycloaddition of atmospheric pressure of CO₂ to epoxides at 373 K. In addition, the gel catalyst could be reused over multiple cycles with no considerable loss of catalytic activity.     

Mixed Metal–Organic Framework with Multiple Binding Sites for Efficient C2H2/CO2 Separation

The separation of C₂H₂/CO₂ is particularly challenging owing to their similarities in physical properties and molecular sizes. Reported here is a mixed metal–organic framework (M′MOF), [Fe(pyz)Ni(CN)₄] ( FeNi‐M′MOF , pyz=pyrazine), with multiple functional sites and compact one‐dimensional channels of about 4.0 Å for C₂H₂/CO₂ separation. This MOF shows not only a remarkable volumetric C₂H₂ uptake of 133 cm³ cm^?3, but also an excellent C₂H₂/CO₂ selectivity of 24 under ambient conditions, resulting in the second highest C₂H₂‐capture amount of 4.54 mol L^?1, thus outperforming most previous benchmark materials. The separation performance of this material is driven by π–π stacking and multiple intermolecular interactions between C₂H₂ molecules and the binding sites of FeNi‐M′MOF . This material can be facilely synthesized at room temperature and is water stable, highlighting FeNi‐M′MOF as a promising material for C₂H₂/CO₂ separation.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

Evidence of Amine–CO2 Interactions in Two Pillared‐Layer MOFs Probed by X‐ray Crystallography

Two pillared‐layer metal–organic frameworks (MOFs; PMOF‐55 and NH₂‐PMOF‐55) based on 1,2,4‐triazole and terephthalic acid (bdc)/NH₂‐bdc ligands were assembled and display framework stabilities, to a certain degree, in both acid/alkaline solutions and toward water. They exhibit high CO₂ uptakes and selective CO₂/N₂ adsorption capacities, with CO₂/N₂ selectivity in the range of 24–27, as calculated by the ideal adsorbed solution theory method. More remarkably, the site and interactions between the host network and the CO₂ molecules were investigated by single‐crystal X‐ray diffraction, which showed that the main interaction between the CO₂ molecules and PMOF‐55 is due to multipoint supramolecular interactions of C?H???O, C???O, and O???O. Amino functional groups were shown to enhance the CO₂ adsorption and identified as strong adsorption sites for CO₂ by X‐ray crystallography.     

Biomaterials obtained by gelation of silica precursor with CO<Subscript>2</Subscript> saturated water containing a carbonic anhydrase enzyme

As part of an effort to develop biomaterials for the capture of CO₂ catalyzed by a carbonic anhydrase enzyme, the effects of an aqueous CO₂ saturated solution and a carbonic anhydrase on the gelation and texture of SiO₂ gels derived from tetramethoxysilane (TMOS), were studied. Both aqueous CO₂ and the enzyme were found to accelerate the gelation of silica, with a stronger effect when both the enzyme and CO₂ saturated aqueous water, were used. According to the gel texture data, aqueous CO₂ acted as an acid type catalyst, while the carbonic anhydrase acted as a weak base type catalyst. Moreover, a gel with a more granular visual aspect was obtained when both the enzyme and CO₂ saturated water were used. The latter characteristic was consistent with a double action of the enzyme, first as a gelation catalyst on the silica precursor, secondly as a reverse protonation catalyst which accelerated the back nucleation of CO₂ gas bubbles from aqueous HCO₃ ⁻ anions.     

In situ Synchrotron IR Microspectroscopy of CO2 Adsorption on Single Crystals of the Functionalized MOF Sc2(BDC‐NH2)3

Synchrotron radiation (SR) IR microspectroscopy has enabled determination of the thermodynamics, kinetics, and molecular orientation of CO₂ adsorbed in single microcrystals of a functionalized metal–organic framework (MOF) under conditions relevant to carbon capture from flue gases. Single crystals of the small‐pore MOF, Sc₂(BDC‐NH₂)₃, (BDC‐NH₂=2‐amino‐1,4‐benzenedicarboxylate), with well‐defined crystal form have been investigated during CO₂ uptake at partial pressures of 0.025‐0.2 bar at 298–373 K. The enthalpy and diffusivity of adsorption determined from individual single crystals are consistent with values obtained from measurements on bulk samples. The brilliant SR IR source permits rapid collection of polarized spectra. Strong variations in absorbance of the symmetric stretch of the NH₂ groups of the MOF and the asymmetric stretch of the adsorbed CO₂ at different orientations of the crystals relative to the polarized IR light show that CO₂ molecules align along channels in the MOF.     

An Isoreticular Family of Microporous Metal–Organic Frameworks Based on Zinc and 2‐Substituted Imidazolate‐4‐amide‐5‐imidate: Syntheses,Structures and Properties

We report on a new series of isoreticular frameworks based on zinc and 2‐substituted imidazolate‐4‐amide‐5‐imidate (IFP‐1–4, IFP=imidazolate framework Potsdam) that form one‐dimensional, microporous hexagonal channels. Varying R in the 2‐substitued linker (R=Me (IFP‐1), Cl (IFP‐2), Br (IFP‐3), Et (IFP‐4)) allowed the channel diameter (4.0–1.7 Å), the polarisability and functionality of the channel walls to be tuned. Frameworks IFP‐2, IFP‐3 and IFP‐4 are isostructural to previously reported IFP‐1. The structures of IFP‐2 and IFP‐3 were solved by X‐ray crystallographic analyses. The structure of IFP‐4 was determined by a combination of PXRD and structure modelling and was confirmed by IR spectroscopy and ¹H MAS and ¹³C CP‐MAS NMR spectroscopy. All IFPs showed high thermal stability (345–400 °C); IFP‐1 and IFP‐4 were stable in boiling water for 7 d. A detailed porosity analysis was performed on the basis of adsorption measurements by using various gases. The potential of the materials to undergo specific interactions with CO₂ was investigated by measuring the isosteric heats of adsorption. The capacity to adsorb CH₄ (at 298 K), CO₂ (at 298 K) and H₂ (at 77 K) at high pressure were also investigated. In situ IR spectroscopy showed that CO₂ is physisorbed on IFP‐1–4 under dry conditions and that both CO₂ and H₂O are physisorbed on IFP‐1 under moist conditions.     

Flexible and Rigid Amine‐Functionalized Microporous Frameworks Based on Different Secondary Building Units: Supramolecular Isomerism,Selective CO2 Capture,and Catalysis

We report the synthesis, structural characterization, and porous properties of two isomeric supramolecular complexes of ([Cd(NH₂?bdc)(bphz)_0.5]?DMF?H₂O}_n (NH₂?bdc=2‐aminobenzenedicarboxylic acid, bphz=1,2‐bis(4‐pyridylmethylene)hydrazine) composed of a mixed‐ligand system. The first isomer, with a paddle‐wheel‐type Cd₂(COO)₄ secondary building unit (SBU), is flexible in nature, whereas the other isomer has a rigid framework based on a μ‐oxo‐bridged Cd₂(μ‐OCO)₂ SBU. Both frameworks are two‐fold interpenetrated and the pore surface is decorated with pendant ?NH₂ and ?N?N? functional groups. Both the frameworks are nonporous to N₂, revealed by the type II adsorption profiles. However, at 195 K, the first isomer shows an unusual double‐step hysteretic CO₂ adsorption profile, whereas the second isomer shows a typical type I CO₂ profile. Moreover, at 195 K, both frameworks show excellent selectivity for CO₂ among other gases (N₂, O₂, H₂, and Ar), which has been correlated to the specific interaction of CO₂ with the ?NH₂ and ?N?N? functionalized pore surface. DFT calculations for the oxo‐bridged isomer unveiled that the ?NH₂ group is the primary binding site for CO₂. The high heat of CO₂ adsorption (ΔH_ads=37.7 kJ mol^?1) in the oxo‐bridged isomer is realized by NH₂???CO₂/aromatic π???CO₂ and cooperative CO₂???CO₂ interactions. Further, postsynthetic modification of the ?NH₂ group into ?NHCOCH₃ in the second isomer leads to a reduced CO₂ uptake with lower binding energy, which establishes the critical role of the ?NH₂ group for CO₂ capture. The presence of basic ?NH₂ sites in the oxo‐bridged isomer was further exploited for efficient catalytic activity in a Knoevenagel condensation reaction.     

Metal–Organic Framework for Emulsifying Carbon Dioxide and Water

Forming emulsions of carbon dioxide (CO₂) and water can largely expand the utility of CO₂. Herein we propose for the first time the utilization of a metal–organic framework (MOF) for emulsifying CO₂ and water. Owing to the hybrid composition, MOF particles can easily assemble at the CO₂/water interface to create a rigid protective barrier around the dispersed droplet. The MOF‐stabilized CO₂ and water emulsion has exceptional stability compared to those emulsions stabilized by surfactants or other solids. Moreover, the CO₂ and water emulsion stabilized by MOF is “tunable” due to the designable features of MOFs and adjustable character of CO₂. Such a novel kind of emulsion composed of CO₂, water, and MOF provides a facile route for constructing MOF superstructures with many advantages. The macroporous networks and hollow capsules of different kinds of MOFs have been successfully derived from CO₂ and water emulsions.     

Hierarchical Mesoporous Metal–Organic Frameworks for Enhanced CO2 Capture

Hierarchical porous materials are promising for catalyst, separation and sorption applications. A ligand‐assisted etching process is developed for template‐free synthesis of hierarchical mesoporous MOFs as single crystals and well‐intergrown membranes at 40 °C. At 223 K, the hierarchical porous structures significantly improve the CO₂ capture capacity of HKUST‐1 by more than 44 % at pressures up to 20 kPa and 13 % at 100 kPa. Even at 323 K, the enhancement of CO₂ uptake is above 25 % at pressures up to 20 kPa and 7 % at 100 kPa. The mesoporous structures not only enhance the CO₂ uptake capacity but also improve the diffusion and mass transportation of CO₂. Similarly, well‐intergrown mesoporous HKUST‐1 membranes are synthesized, which hold the potential for film‐like porous devices. Mesoporous MOF‐5 crystals are also obtained by a similar ligand‐assisted etching process. This may provide a facile way to prepare hierarchical porous MOF single crystals and membranes for wide‐ranging applications.     

Photoswitching CO2 Capture and Release in a Photochromic Diarylethene Metal–Organic Framework

We demonstrate herein a promising pathway towards low‐energy CO₂ capture and release triggered by UV and visible light. A photosensitive diarylethene ligand was used to construct a photochromic diarylethene metal–organic framework (DMOF). A local photochromic reaction originating from the framework movement induced by the photoswitchable diarylethene unit resulted in record CO₂‐desorption capacity of 75 % under static irradiation and 76 % under dynamic irradiation.     

A Cationic MOF with High Uptake and Selectivity for CO2 due to Multiple CO2‐Philic Sites

The reaction of N‐rich pyrazinyl triazolyl carboxyl ligand 3‐(4‐carboxylbenzene)‐5‐(2‐pyrazinyl)‐1H‐1,2,4‐triazole (H₂cbptz) with MnCl₂ afforded 3D cationic metal–organic framework (MOF) [Mn₂(Hcbptz)₂(Cl)(H₂O)]Cl ? DMF ? 0.5 CH₃CN ( 1 ), which has an unusual (3,4)‐connected 3,4T1 topology and 1D channels composed of cavities. MOF 1 has a very polar framework that contains exposed metal sites, uncoordinated N atoms, narrow channels, and Cl^? basic sites, which lead to not only high CO₂ uptake, but also remarkably selective adsorption of CO₂ over N₂ and CH₄ at 298–333 K. The multiple CO₂‐philic sites were identified by grand canonical Monte Carlo simulations. Moreover, 1 shows excellent stability in natural air environment. These advantages make 1 a very promising candidate in post‐combustion CO₂ capture, natural‐gas upgrading, and landfill gas‐purification processes.     

Studies on Photocatalytic CO2 Reduction over NH2‐Uio‐66(Zr) and Its Derivatives: Towards a Better Understanding of Photocatalysis on Metal–Organic Frameworks

Metal–organic framework (MOF) NH₂‐Uio‐66(Zr) exhibits photocatalytic activity for CO₂ reduction in the presence of triethanolamine as sacrificial agent under visible‐light irradiation. Photoinduced electron transfer from the excited 2‐aminoterephthalate (ATA) to Zr oxo clusters in NH₂‐Uio‐66(Zr) was for the first time revealed by photoluminescence studies. Generation of Zr^III and its involvement in photocatalytic CO₂ reduction was confirmed by ESR analysis. Moreover, NH₂‐Uio‐66(Zr) with mixed ATA and 2,5‐diaminoterephthalate (DTA) ligands was prepared and shown to exhibit higher performance for photocatalytic CO₂ reduction due to its enhanced light adsorption and increased adsorption of CO₂. This study provides a better understanding of photocatalytic CO₂ reduction over MOF‐based photocatalysts and also demonstrates the great potential of using MOFs as highly stable, molecularly tunable, and recyclable photocatalysts in CO₂ reduction.     

Unusually Strong Dipole–Dipole and Dipole–Quadrupole Interactions in a Nanoporous Solid. Crystal Structure and Related Properties of (VO)3[M(CN)6]2·nH2O (M = Fe,Co)

In porous Prussian blue (PB) analogues, the partially naked central metal atoms found at the cavities surface are responsible for many of their physical properties, among them the adsorption potentials. In the as‐synthesized PB analogues, such metal sites stabilize water molecules inside the cavity through coordination bond formation. The filling of the cavity volume is completed with water molecules linked to the coordinated ones through hydrogen bonds formation. Vanadyl‐based PB analogue shows quite different features. The metal(V) at the cavities surface has saturated its coordination sphere with the O atom of the vanadyl ion (V=O). In this material, the V=O group preserves enough strong dipole moment to stabilize adsorbed species at the cavity through dipole–dipole and dipole–quadrupole interactions. This contribution reports the preparation, crystal structure and properties for (VO)₃[M(CN)₆]₂ · nH₂O (M = Fe, Co). According to the refined crystal structure, IR spectra and TG data, six water molecules remain stabilized inside the cavities through a strong dipole–dipole coupling with the vanadyl group. The cavity contains additional water molecules interacting through hydrogen bond bridges with the water molecules coupled to the V=O group. The vanadyl ion is free of hydrogen bonding interactions with the water molecules. The recorded adsorption isotherms for N₂, CO₂ and H₂, three molecules with only quadrupole moment, reveal presence of relative strong adsorption forces due to dipole‐quadrupole interactions.     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006