Immunological Evaluation of Co‐Assembling a Lipidated Peptide Antigen and Lipophilic Adjuvants: Self‐Adjuvanting Anti‐Breast‐Cancer Vaccine Candidates

Co‐assembling vaccines composed of a lipidated HER2‐derived antigenic CH401 peptide and either a lipophilic adjuvant, Pam₃CSK₄, α‐GalCer, or lipid A 506, were evaluated as breast cancer vaccine candidates. This vaccine design was aimed to inherit both antigen multivalency and antigen‐specific immunostimulation properties, observed in reported self‐adjuvanting vaccine candidates, by using self‐assembly and adjuvant‐conjugated antigens. Under vaccination concentrations, respective lipophilic adjuvants underwent co‐assembly with lipidated CH401, which boosted the anti‐CH401 IgG and IgM production. In particular, α‐GalCer was responsible for the most significant immune activation. Therefore, the newly developed vaccine design enabled the optimization of adjuvants against the antigenic CH401 peptide in a simple preparatory manner. Overall, the co‐assembling vaccine design opens the door for efficient and practical self‐adjuvanting vaccine development.     

Synthesis and Immunological Evaluation of Self‐Assembling and Self‐Adjuvanting Tricomponent Glycopeptide Cancer‐Vaccine Candidates

Self‐adjuvanting tricomponent vaccines were prepared and assessed for their self‐assembly and immunological activity in mouse models. The vaccines each consisted of a peptide or glycopeptide antigen that corresponds to a complete copy of the variable‐number tandem repeat (VNTR) of the tumor‐associated mucin 1 (MUC1) glycoprotein, the universal T‐cell helper peptide epitope PADRE, and the immunoadjuvant Pam₃CysSer. The vaccines were shown to spontaneously self‐assemble in water to form isotropic particles varying in size from 17 to 25 nm and elicited robust humoral responses in murine models without the addition of an external adjuvant. The serum antibodies could recognize tumor‐associated MUC1 epitopes on the surface of MCF7 breast‐cancer cells and B16 melanoma cells, which overexpress this tumor‐associated glycoprotein.     

Using Diffusion NMR To Characterize Guanosine Self‐Association: Insights into Structure and Mechanism

This paper presents results from a series of pulsed field gradient (PFG) NMR studies on lipophilic guanosine nucleosides that undergo cation‐templated assembly in organic solvents. The use of PFG‐NMR to measure diffusion coefficients for the different aggregates allowed us to observe the influences of cation, solvent and anion on the self‐assembly process. Three case studies are presented. In the first study, diffusion NMR confirmed formation of a hexadecameric G‐quadruplex [G 1 ]₁₆ ? 4 K⁺ ? 4 pic^? in CD₃CN. Furthermore, hexadecamer formation from 5′‐TBDMS‐2′,3′‐isopropylidene G 1 and K⁺ picrate was shown to be a cooperative process in CD₃CN. In the second study, diffusion NMR studies on 5′‐(3,5‐bis(methoxy)benzoyl)‐2′,3′‐isopropylidene G 4 showed that hierarchical self‐association of G₈‐octamers is controlled by the K⁺ cation. Evidence for formation of both discrete G₈‐octamers and G₁₆‐hexadecamers in CD₂Cl₂ was obtained. The position of this octamer–hexadecamer equilibrium was shown to depend on the K⁺ concentration. In the third case, diffusion NMR was used to determine the size of a guanosine self‐assembly where NMR signal integration was ambiguous. Thus, both diffusion NMR and ESI‐MS show that 5′‐O‐acetyl‐2′,3′‐O‐isopropylidene G 7 and Na⁺ picrate form a doubly charged octamer [G 7 ]₈ ? 2 Na⁺ ? 2 pic^? 9 in CD₂Cl₂. The anion's role in stabilizing this particular complex is discussed. In all three cases the information gained from the diffusion NMR technique enabled us to better understand the self‐assembly processes, especially regarding the roles of cation, anion and solvent.     

Bioactive Seed Layer for Surface‐Confined Self‐Assembly of Peptides

The design and control of molecular systems that self‐assemble spontaneously and exclusively at or near an interface represents a real scientific challenge. We present here a new concept, an active seed layer that allows to overcome this challenge. It is based on enzyme‐assisted self‐assembly. An enzyme, alkaline phosphatase, which transforms an original peptide, Fmoc‐FFY(PO₄^2?), into an efficient gelation agent by dephosphorylation, is embedded in a polyelectrolyte multilayer and constitutes the “reaction motor”. A seed layer composed of a polyelectrolyte covalently modified by anchoring hydrogelator peptides constitutes the top of the multilayer. This layer is the nucleation site for the Fmoc‐FFY peptide self‐assembly. When such a film is brought in contact with a Fmoc‐FFY(PO₄^2?) solution, a nanofiber network starts to form almost instantaneously which extents up to several micrometers into the solution after several hours. We demonstrate that the active seed layer allows convenient control over the self‐assembly kinetics and the geometric features of the fiber network simply by changing its peptide density.     

Supramolecular Hydrogels of Indole‐Capped Short Peptides as Vaccine Adjuvants

Many materials as immune adjuvant are researched to help raise immnogenicity of subunit vaccines. Among them, peptide‐based hydrogels are gradually coming into notice because of their application in drugs delivery, cancer cell inhibition, vaccine adjuvants and detection of important analytes. In this work, we introduced a novel aromatic capping group based on indole to construct short peptide‐based supramolecular hydrogelators Indol‐GFFY and Indol‐G^D F^D F^D Y and demonstrated their potential applications as vaccine adjuvants.     

Self‐assembly of star‐shaped polystyrene‐block‐polypeptide copolymers synthesized by the combination of atom transfer radical polymerization and ring‐opening living polymerization of α‐amino acid‐N‐carboxyanhydrides

The self‐assembling nature and phase‐transition behavior of a novel class of triarm, star‐shaped polymer–peptide block copolymers synthesized by the combination of atom transfer radical polymerization and living ring‐opening polymerization of α‐amino acid‐N‐carboxyanhydride are demonstrated. The two‐step synthesis strategy adopted here allows incorporating polypeptides into the usual synthetic polymers via an amido–amidate nickelacycle intermediate, which is used as the macroinitiator for the growth of poly(γ‐benzyl‐L ‐glutamate). The characterization data are reported from analyses using gel permeation chromatography and infrared, ¹H NMR, and ¹³C NMR spectroscopy. This synthetic scheme grants a facile way to prepare a wide range of polymer–peptide architectures with perfect microstructure control, preventing the formation of homopolypeptide contaminants. Studies regarding the supramolecular organization and phase‐transition behavior of this class of polymer‐block‐polypeptide copolymers have been accomplished with X‐ray diffraction, infrared spectroscopy, and thermal analyses. The conformational change of the peptide segment in the block copolymer has been investigated with variable‐temperature infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2774–2783, 2006     

Solvent‐Dependent Self‐Assembly Behaviour and Speciation Control of Pd6L8 Metallo‐supramolecular Cages

The C₃‐symmetric chiral propylated host‐type ligands (±)‐tris(isonicotinoyl)‐tris(propyl)‐cyclotricatechylene ( L1 ) and (±)‐tris(4‐pyridyl‐4‐benzoxy)‐tris(propyl)‐cyclotricatechylene ( L2 ) self‐assemble with Pd^II into [Pd₆L₈]¹²⁺ metallo‐cages that resemble a stella octangula. The self‐assembly of the [Pd₆( L1 )₈]¹²⁺ cage is solvent‐dependent; broad NMR resonances and a disordered crystal structure indicate no chiral self‐sorting of the ligand enantiomers in DMSO solution, but sharp NMR resonances occur in MeCN or MeNO₂. The [Pd₆( L1 )₈]¹²⁺ cage is observed to be less favourable in the presence of additional ligand, than is its counterpart, where L=(±)‐tris(isonicotinoyl)cyclotriguaiacylene ( L1 a ). The stoichiometry of reactant mixtures and chemical triggers can be used to control formation of mixtures of homoleptic or heteroleptic [Pd₆L₈]¹²⁺ metallo‐cages where L= L1 and L1 a .     

Development of a Continuous‐Flow System for Asymmetric Hydrogenation Using Self‐Supported Chiral Catalysts

Well‐designed, self‐assembled, metal–organic frameworks were constructed by simple mixing of multitopic MonoPhos‐based ligands ( 3 ; MonoPhos=chiral, monodentate phosphoramidites based on the 1,1′‐bi‐2‐naphthol platform) and [Rh(cod)₂]BF₄ (cod=cycloocta‐1,5‐diene). This self‐supporting strategy allowed for simple and efficient catalyst immobilization without the use of extra added support, giving well‐characterized, insoluble (in toluene) polymeric materials ( 4 ). The resulting self‐supported catalysts ( 4 ) showed outstanding catalytic performance for the asymmetric hydrogenation of a number of α‐dehydroamino acids ( 5 ) and 2‐aryl enamides ( 7 ) with enantiomeric excess (ee) ranges of 94–98 % and 90–98 %, respectively. The linker moiety in 4 influenced the reactivity significantly, albeit with slight impact on the enantioselectivity. Acquisition of reaction profiles under steady‐state conditions showed 4 h and 4 i to have the highest reactivity (turnover frequency (TOF)=95 and 97 h^?1 at 2 atm, respectively), whereas appropriate substrate/catalyst matching was needed for optimum chiral induction. The former was recycled 10 times without loss in ee (95–96 %), although a drop in TOF of approximately 20 % per cycle was observed. The estimation of effective catalytic sites in self‐supported catalyst 4 e was also carried out by isolation and hydrogenation of catalyst–substrate complex, showing about 37 % of the Rh^I centers in the self‐supported catalyst 4 e are accessible to substrate 5 c in the catalysis. A continuous flow reaction system using an activated C/ 4 h mixture as stationary‐phase catalyst for the asymmetric hydrogenation of 5 b was developed and run continuously for a total of 144 h with >99 % conversion and 96–97 % enantioselectivity. The total Rh leaching in the product solution is 1.7 % of that in original catalyst 4 h .     

Synthesis and Self‐Assembly of Novel s‐Tetrazine‐Based Gelator

The design, synthesis and self‐assembly of new symmetrical 3,6‐bis(4‐(3,4,5‐tris(dodecyloxy)benzoate)phenyl)‐1,2,4,5‐tetrazine were described. The novel gelator, sym‐tetrazine, was prepared by addition reaction of 4‐cyanophenol with hydrazine monohydrate followed by oxidation reaction to afford the corresponding 3,6‐bis(4‐hydroxyphenyl)‐1,2,4,5‐tetrazine which was then subjected to esterification reaction with 3,4,5‐tris(dodecyloxy)benzoic acid. The chemical structure of the sym‐tetrazine gelator was confirmed by elemental analysis, fourier‐transform infrared spectroscopy (FT‐IR), and nuclear magnetic resonance (¹H‐ and ¹³C‐NMR) spectral measurements. It was confirmed to exhibit relatively strong gelation ability to produce supramolecular assemblies in several polar alcoholic organic solvents, such as butanol, octanol, and 1,6‐dihydroxyhexane. The π‐π stacking and van der Waals mediated self‐assembly of tetrazine‐based organogelator were studied by scanning electron microscopy images of the xerogel to reveal that the obtained organogel consists of fibrillar aggregates. Investigation of FT‐IR and concentration‐dependent ¹H‐NMR spectra confirm that the intermolecular van der Waals interactions and π‐π stacking were the key driving forces for self‐assembly during gelation process of s‐tetrazine molecules.     

Self‐Assembly of Amphiphilic Anthracene‐Functionalized β‐Cyclodextrin (CD‐AN) through Multi‐Micelle Aggregation

Multi‐micelle aggregation (MMA) mechanism is widely acknowledged to explicate large spherical micelles self‐assembly, but the process of MMA during self‐assembly is hard to observe. Herein, a novel kind of strong, regular microspheres fabricated from self‐assembly of amphiphilic anthracene‐functionalized β‐cyclodextrin (CD‐AN) via Cu(I)‐catalyzed azide‐alkyne click reactions is reported. The obtained CD‐AN amphiphiles can self‐assemble in water from primary core–shell micelles to secondary aggregates with the diameter changing from several tens nm to around 600–700 nm via MMA process according to the images of scanning electron microscopy, transmission electron microscopy, and atomic force microscopy as well as the dynamic light scattering measurements, followed by further crosslinking through photo‐dimerization of anthracene. What merits special attention is that such photo‐crosslinked self‐assemblies are able to disaggregate reversibly into primary nanoparticles when changing the solution conditions, which is benefited from the designed regular structure of CD‐AN and the rigid ranging of anthracene during assembly, thus confirming the process of MMA.

     

Polyoxometalate Ionic Liquids as Self‐Repairing Acid‐Resistant Corrosion Protection

Corrosion is a global problem for any metallic structure or material. Herein we show how metals can easily be protected against acid corrosion using hydrophobic polyoxometalate‐based ionic liquids (POM‐ILs). Copper metal disks were coated with room‐temperature POM‐ILs composed of transition‐metal functionalized Keggin anions [SiW₁₁O₃₉TM(H₂O)]^n? (TM=Cu^II, Fe^III) and quaternary alkylammonium cations (C_nH_{2 n+1})₄N⁺ (n=7–8). The corrosion resistance against acetic acid vapors and simulated “acid rain” was significantly improved compared with commercial ionic liquids or solid polyoxometalate coatings. Mechanical damage to the POM‐IL coating is self‐repaired in less than one minute with full retention of the acid protection properties. The coating can easily be removed and recovered by rinsing with organic solvents.     

Competitive Molecular‐/Ion‐Recognition Responsive Characteristics of Poly(N‐isopropylacrylamide‐co‐benzo‐12‐crown‐4‐acrylamide) Copolymers with Benzo‐12‐crown‐4 as Both Guest and Host Units

Novel dual molecular‐ and ion‐recognition responsive poly(N‐isopropylacrylamide‐co‐benzo‐12‐crown‐4‐acrylamide) (PNB₁₂C₄) linear copolymers with benzo‐12‐crown‐4 (B12C4) as both guest and host units are prepared. The copolymers exhibit highly selective sensitivities toward γ‐cyclodextrin (γ‐CD) and Na⁺. The presence of γ‐CD induces the lower critical solution temperature (LCST) of PNB₁₂C₄ copolymer to shift to a higher value due to the formation of 1:1 γ‐CD/B12C4 host‐guest inclusion complexes, while Na⁺ causes a negative shift in LCST due to the formation of 2:1 “sandwich” B12C4/Na⁺ host‐guest complexes. Regardless of the complexation order, when γ‐CD and Na⁺ coexist with PNB₁₂C₄, competitive complexation actions of B12C4 as both guest and host units toward γ‐CD and Na⁺ finally form equilibrium 2:2:1 γ‐CD/B12C4/Na⁺ composite complexes, and the final LCST values of PNB₁₂C₄ copolymer reach almost the same level. The results provide valuable guidance for designing and applying PNB₁₂C₄‐based smart materials in various applications.

     

Hierarchical Superstructures with Control of Helicity from the Self‐Assembly of Chiral Bent‐Core Molecules

Herein, two asymmetric chiral bent‐core molecules, 3‐[(4‐{[4‐(heptyloxy)benzoyl]oxy}benzoyl)oxy]‐phenyl‐4‐[(4‐{[(1R)‐1‐methylheptyl]oxy}benzoyl)oxy] benzoate (BC7R) and 3‐[(4‐{[4‐(heptyloxy)benzoyl]oxy}benzoyl)oxy]‐phenyl‐4‐[(4‐{[(1S)‐1‐methylheptyl]oxy}benzoyl)oxy] benzoate (BC7S), were synthesized to demonstrate control of the helicity of their self‐assembled hierarchical superstructures. Mirror‐imaged CD spectra showed a split‐type Cotton effect after the formation of self‐assembled aggregates of BC7R and BC7S, thereby suggesting the formation of intermolecular exciton couplets with opposite optical activities. Both twisted and helical ribbons with preferential helicity that corresponded to the twisting character of the intermolecular exciton couplet were found in the aggregates. The formation of helical ribbons was attributed to the merging of twisted ribbons through an increase in width to improve morphological stability. As a result, control of the helicity of hierarchical superstructures from the self‐assembly of bent‐core molecules could be achieved by taking advantage of the transfer of chiral information from the molecular level onto the hierarchical scale.     

Aqueous Self‐Assembly and Cation Selectivity of Cobaltabisdicarbollide Dianionic Dumbbells

The anion [3,3′‐Co(C₂B₉H₁₁)₂]^? ([COSAN]^?) produces aggregates in water. These aggregates are interpreted to be the result of C?H???H?B interactions. It is possible to generate aggregates even after the incorporation of additional functional groups into the [COSAN]^? units. The approach is to join two [COSAN]^? anions by a linker that can adapt itself to act as a crown ether. The linker has been chosen to have six oxygen atoms, which is the ideal number for K⁺ selectivity in crown ethers. The linker binds the alkaline metal ions with different affinities; thus showing a distinct degree of selectivity. The highest affinity is shown towards K⁺ from a mixture containing Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺; this can be indicative of pseudo‐crown ether performance of the dumbbell. One interesting possibility is that the [COSAN]^? anions at the two ends of the linker can act as a hook‐and‐loop fastener to close the ring. This facet is intriguing and deserves further consideration for possible applications. The distinct affinity towards alkaline metal ions is corroborated by solubility studies and isothermal calorimetry thermograms. Furthermore, cryoTEM micrographs, along with light scattering results, reveal the existence of small self‐assemblies and compact nanostructures ranging from spheres to single‐/multi‐layer vesicles in aqueous solutions. The studies reported herein show that these dumbbells can have different appearances, either as molecules or aggregates, in water or lipophilic phases; this offers a distinct model as drug carriers.     

Peptide‐poly(tert‐butyl methacrylate) conjugate into composite micelles in organic solvents versus peptide‐poly(methacrylic acid) conjugate into spherical and worm‐like micelles in water: Synthesis and self‐assembly

Peptide–polymer conjugates are versatile class of biomaterials composed of a peptide block covalently linked with a synthetic polymer block. This report demonstrates the synthesis of peptide‐poly(tert‐butyl methacrylate) (Peptide‐P^tBMA) conjugates of varying molecular weights via a “grafting from” atom transfer radical polymerization (ATRP) technique using as‐synthesized peptide‐based initiator in toluene. Peptide‐P^tBMA conjugate is soluble in many organic solvents and undergoes self‐assembly into micro/nanospheres in DMF/THF as observed from both FESEM and DLS results. The conjugate micro/nanospheres are nothing but the composite micelles formed by the secondary aggregation of primary micelles generated initially in these organic solvents. The hydrolysis of tert‐butyl groups of Peptide‐P^tBMA conjugate leads to the formation of peptide‐poly(methacrylic acid) (Peptide‐PMA) conjugate. The circular dichroism (CD) analysis exhibits the presence of β‐sheet conformation of peptide moiety in synthesized conjugates. The formed Peptide‐PMA conjugate is soluble in water and owing to its amphiphilic character, the conjugate molecules self‐assemble into spherical micelles as well as worm‐like micelles upon increasing the concentration of conjugate in water. However, the sodium salt of Peptide‐PMA conjugates (Peptide‐PMAS) self‐assembles into only spherical swollen micelles in water at higher (pH ～10). The critical aggregation concentrations (CACs) of both Peptide‐PMA and Peptide‐PMAS micelles are measured by fluorescence spectroscopy. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3019–3031     

Unexpected Self‐Sorting Self‐Assembly Formation of a [4:4] Sulfate:Ligand Cage from a Preorganized Tripodal Urea Ligand

The design and synthesis of tripodal ligands 1 – 3 based upon the N‐methyl‐1,3,5‐benzenetricarboxamide platform appended with three aryl urea arms is reported. This ligand platform gives rise to highly preorganized structures and is ideally suited for binding SO₄^2? and H₂PO₄^? ions through multiple hydrogen‐bonding interactions. The solid‐state crystal structures of 1 – 3 with SO₄^2? show the encapsulation of a single anion within a cage structure, whereas the crystal structure of 1 with H₂PO₄^? showed that two anions are encapsulated. We further demonstrate that ligand 4 , based on the same platform but consisting of two bis‐urea moieties and a single ammonium moiety, also recognizes SO₄^2? to form a self‐assembled capsule with [4:4] SO₄^2?: 4 stoichiometry in which the anions are clustered within a cavity formed by the four ligands. This is the first example of a self‐sorting self‐assembled capsule where four tetrahedrally arranged SO₄^2? ions are embedded within a hydrophobic cavity.     

Self‐Healing Colloidal Crystals

Healing hands : A complex interplay between colloidal and polymeric energetics in microgel self‐assembly behavior results in soft colloidal assemblies with self‐healing properties. Repulsive soft spheres can adopt highly compressed conformations in colloidal crystalline lattices without directly contacting the nearest neighbors (see picture). This distant action is directly responsible for the self‐healing of the assemblies.

     

Self‐healing in Nanocomposite Hydrogels

Polymer hydrogels with characteristics distinct from those of solid materials are one of the most promising candidates for smart materials. Here, we report that a nanocomposite hydrogel (NC gel) consisting of a unique polymer/clay network structure, can exhibit complete self‐healing through autonomic reconstruction of crosslinks across a damaged interface. Mechanical damage in NC gels can be repaired without the use of a healing agent, and even sections of NC gels separated by cutting, from whichever the same or different kinds of NC gel, perfectly (re‐)combine by just contacting the cut surfaces together at mildly elevated temperatures. In NC gels, the autonomic fusion of cut surfaces as well as the self‐healing could be achieved not only immediately after being cut but also after a long waiting time.

     

A Multiple‐Responsive Self‐Healing Supramolecular Polymer Gel Network Based on Multiple Orthogonal Interactions

Supramolecular polymer networks have attracted considerable attention not only due to their topological importance but also because they can show some fantastic properties such as stimuli‐responsiveness and self‐healing. Although various supramolecular networks are constructed by supramolecular chemists based on different non‐covalent interactions, supramolecular polymer networks based on multiple orthogonal interactions are still rare. Here, a supramolecular polymer network is presented on the basis of the host–guest interactions between dibenzo‐24‐crown‐8 (DB24C8) and dibenzylammonium salts (DBAS), the metal–ligand coordination interactions between terpyridine and Zn(OTf)₂, and between 1,2,3‐triazole and PdCl₂(PhCN)₂. The topology of the networks can be easily tuned from monomer to main‐chain supramolecular polymer and then to the supramolecular networks. This process is well studied by various characterization methods such as ¹H NMR, UV–vis, DOSY, viscosity, and rheological measurements. More importantly, a supramolecular gel is obtained at high concentrations of the supramolecular networks, which demonstrates both stimuli‐responsiveness and self‐healing properties.

     

Self‐Assembly of Ureido‐Pyrimidinone Dimers into One‐Dimensional Stacks by Lateral Hydrogen Bonding

Ureido‐pyrimidinone (UPy) dimers substituted with an additional urea functionality self‐assemble into one‐dimensional stacks in various solvents through lateral non‐covalent interactions. ¹H NMR and DOSY studies in CDCl₃ suggest the formation of short stacks (<10), whereas temperature‐dependent circular dichroism (CD) studies on chiral UPy dimers in heptane show the formation of much larger helical stacks. Analysis of the concentration‐dependent evolution of chemical shift in CDCl₃ and the temperature‐dependent CD effect in heptane suggest that this self‐assembly process follows an isodesmic pathway in both solvents. The length of the aggregates is influenced by substituents attached to the urea functionality. In sharp contrast, UPy dimers carrying an additional urethane group do not self‐assemble into ordered stacks, as is evident from the absence of a CD effect in heptane and the concentration‐independent chemical shift of the alkylidene proton of the pyrimidinone ring in CDCl₃.