Hierarchical Porous ZnMn2O4 Hollow Nanotubes with Enhanced Lithium Storage toward Lithium‐Ion Batteries

We have purposefully developed a smart template‐engaged methodology to efficiently fabricate well‐defined ternary spinel ZnMn₂O₄ hollow nanotubes (NTs). The procedure involves coating carbon nanotubes (CNTs) with ZnMn₂O₄ nanosheets (NSs), followed by heating at high temperature in air to oxidize the CNT template. Physicochemical characterization demonstrated that the formed ZnMn₂O₄ NTs with a diameter of approximately 100 nm were composed of assembled NSs and/or nanoparticles (NPs) as building blocks and possessed numerous nanopores of several nanometers in the sidewall of the NTs. In favor of the intrinsic structural advantages, the resulting ZnMn₂O₄ NTs exhibited superior electrochemical lithium‐storage performance with a large capacity, good rate behavior, and excellent cyclability when evaluated as promising anodes for lithium‐ion batteries (LIBs). The remarkable electrochemical performance was rationally ascribed to the appealing one‐dimensional (1D) porous hollow tubular architecture with nanoscale subunits and mesopores in the sidewalls, which decreased the diffusion length for the Li⁺ ions, improved the kinetic process, and enhanced the structural integrity with sufficient void space to tolerate the volume variation during Li⁺‐ion insertion/extraction. These results highlight the promising application of 1D ZnMn₂O₄ NTs as anodes for high‐performance LIBs.     

Synthesis of Mesoporous Lithium Titanate Thin Films and Monoliths as an Anode Material for High‐Rate Lithium‐Ion Batteries

Mesoporous Li₄Ti₅O₁₂ (LTO) thin film is an important anode material for lithium‐ion batteries (LIBs). Mesoporous films could be prepared by self‐assembly processes. A molten‐salt‐assisted self‐assembly (MASA) process is used to prepare mesoporous thin films of LTOs. Clear solutions of CTAB, P123, LiNO₃, HNO₃, and Ti(OC₄H₉)₄ in ethanol form gel‐like meso‐ordered films upon either spin or spray coating. In the assembly process, the CTAB/P123 molar ratio of 14 is required to accommodate enough salt species in the mesophase, in which the Li^I/P123 ratio can be varied between molar ratios of 28 and 72. Calcination of the meso‐ordered films produces transparent mesoporous spinel LTO films that are abbreviated as Cxx‐yyy‐zzz or CAxx‐yyy‐zzz (C=calcined, CA=calcined–annealed, xx=Li^I/P123 molar ratio, and yyy=calcination and zzz=annealing temperatures in Celsius) herein. All samples were characterized by using XRD, TEM, N₂‐sorption, and Raman techniques and it was found that, at all compositions, the LTO spinel phase formed with or without an anatase phase as an impurity. Electrochemical characterization of the films shows excellent performance at different current rates. The CA40‐350‐450 sample performs best among all samples tested, yielding an average discharge capacity of (176±1) mA h g^?1 at C/2 and (139±4) mA h g^?1 at 50 C and keeping 92 % of its initial discharge capacity upon 50 cycles at C/2.     

Mesoporous Spherical Li4Ti5O12 as High‐Performance Anodes for Lithium‐Ion Batteries

Porous microspherical Li₄Ti₅O₁₂ aggregates (LTO‐PSA) can be successfully prepared by using porous spherical TiO₂ as a titanium source and lithium acetate as a lithium source followed by calcinations. The synthesized LTO‐PSA possess outstanding morphology, with nanosized, porous, and spherical distributions, that allow good electrochemical performances, including high reversible capacity, good cycling stability, and impressive rate capacity, to be achieved. The specific capacity of the LTO‐PSA at 30 C is as high as 141 mA h g^?1, whereas that of normal Li₄Ti₅O₁₂ powders prepared by a sol–gel method can only achieve 100 mA h g^?1. This improved rate performance can be ascribed to small Li₄Ti₅O₁₂ nanocrystallites, a three‐dimensional mesoporous structure, and enhanced ionic conductivity.     

Mesoporous MnCo2O4 with a Flake‐Like Structure as Advanced Electrode Materials for Lithium‐Ion Batteries and Supercapacitors

A mesoporous flake‐like manganese‐cobalt composite oxide (MnCo₂O₄) is synthesized successfully through the hydrothermal method. The crystalline phase and morphology of the materials are characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller methods. The flake‐like MnCo₂O₄ is evaluated as the anode material for lithium‐ion batteries. Owing to its mesoporous nature, it exhibits a high reversible capacity of 1066 mA h g^?1, good rate capability, and superior cycling stability. As an electrode material for supercapacitors, the flake‐like MnCo₂O₄ also demonstrates a high supercapacitance of 1487 F g^?1 at a current density of 1 A g^?1, and an exceptional cycling performance over 2000 charge/discharge cycles.     

Ab initio Studies on Li4+xTi5O12 Compounds as Anode Materials for Lithium‐Ion Batteries

The structural and electronic properties of Li_4+xTi₅O₁₂ compounds (with 0≤x≤6)—to be used as anode materials for lithium‐ion batteries—are studied by means of first principles calculations. The results suggest that Li₄Ti₅O₁₂ can be lithiated to the state Li_8.5Ti₅O₁₂, which provides a theoretical capacity that is about 1.5 times higher than that of the compound lithiated to Li₇Ti₅O₁₂. Further insertion of lithium species into the Li_8.5Ti₅O₁₂ lattice results in a clear structural distortion. The small lattice expansion observed upon lithium insertion (about 0.4 % for the lithiated material Li_8.5Ti₅O₁₂) and the retained [Li₁Ti₅]^16dO₁₂ framework indicate that the insertion/extraction process is reversible. Furthermore, the predicted intercalation potentials are 1.48 and 0.05 V (vs Li/Li⁺) for the Li₄Ti₅O₁₂/Li₇Ti₅O₁₂ and Li₇Ti₅O₁₂/Li_8.5Ti₅O₁₂ composition ranges, respectively. Electronic‐structure analysis shows that the lithiated states Li_4+xTi₅O₁₂ are metallic, which is indicative of good electronic‐conduction properties.     

Controllable Synthesis of Mesoporous Peapod‐like Co3O4@Carbon Nanotube Arrays for High‐Performance Lithium‐Ion Batteries

Transition metal oxides are regarded as promising anode materials for lithium‐ion batteries because of their high theoretical capacities compared with commercial graphite. Unfortunately, the implementation of such novel anodes is hampered by their large volume changes during the Li⁺ insertion and extraction process and their low electric conductivities. Herein, we report a specifically designed anode architecture to overcome such problems, that is, mesoporous peapod‐like Co₃O₄@carbon nanotube arrays, which are constructed through a controllable nanocasting process. Co₃O₄ nanoparticles are confined exclusively in the intratubular pores of the nanotube arrays. The pores between the nanotubes are open, and thus render the Co₃O₄ nanoparticles accessible for effective electrolyte diffusion. Moreover, the carbon nanotubes act as a conductive network. As a result, the peapod‐like Co₃O₄@carbon nanotube electrode shows a high specific capacity, excellent rate capacity, and very good cycling performance.     

Foamlike Porous Spinel MnxCo3−xO4 Material Derived from Mn3[Co(CN)6]2⋅nH2O Nanocubes: A Highly Efficient Anode Material for Lithium Batteries

A new facile strategy has been designed to fabricate spinel Mn_xCo_3?xO₄ porous nanocubes, which involves a morphology‐conserved and pyrolysis‐induced transformation of Prussian Blue Analogue Mn₃[Co(CN)₆]₂ ? nH₂O perfect nanocubes. Owing to the release of CO₂ and N_xO_y in the process of interdiffusion, this strategy can overcome to a large extent the disadvantage of the traditional ceramic route for synthesis of spinels, and Mn_xCo_3?xO₄ with foamlike porous nanostructure is effectively obtained. Importantly, when evaluated as an electrode material for lithium‐ion batteries, the foamlike Mn_xCo_3?xO₄ porous nanocubes display high specific discharge capacity and excellent rate capability. The improved electrochemical performance is attributed to the beneficial features of the particular foamlike porous nanostructure and large surface area, which reduce the diffusion length for Li⁺ ions and enhance the structural integrity with sufficient void space for buffering the volume variation during the Li⁺ insertion/extraction.     

Green Template‐Free Synthesis of Hierarchical Shuttle‐Shaped Mesoporous ZnFe2O4 Microrods with Enhanced Lithium Storage for Advanced Li‐Ion Batteries

In the work, a facile and green two‐step synthetic strategy was purposefully developed to efficiently fabricate hierarchical shuttle‐shaped mesoporous ZnFe₂O₄ microrods (MRs) with a high tap density of ～0.85 g cm³, which were assembled by 1D nanofiber (NF) subunits, and further utilized as a long‐life anode for advanced Li‐ion batteries. The significant role of the mixed solvent of glycerin and water in the formation of such hierarchical mesoporous MRs was systematically investigated. After 488 cycles at a large current rate of 1000 mA g^?1, the resulting ZnFe₂O₄ MRs with high loading of ～1.4 mg per electrode still preserved a reversible capacity as large as ～542 mAh g^?1. Furthermore, an initial charge capacity of ～1150 mAh g^?1 is delivered by the ZnFe₂O₄ anode at 100 mA g^?1, resulting in a high Coulombic efficiency of ～76 % for the first cycle. The superior Li‐storage properties of the as‐obtained ZnFe₂O₄ were rationally associated with its mesoprous micro‐/nanostructures and 1D nanoscaled building blocks, which accelerated the electron transportation, facilitated Li⁺ transfer rate, buffered the large volume variations during repeated discharge/charge processes, and provided rich electrode–electrolyte sur‐/interfaces for efficient lithium storage, particularly at high rates.     

Synthesis of Single‐Crystalline Spinel LiMn2O4 Nanorods for Lithium‐Ion Batteries with High Rate Capability and Long Cycle Life

The long‐standing challenge associated with capacity fading of spinel LiMn₂O₄ cathode material for lithium‐ion batteries is investigated. Single‐crystalline spinel LiMn₂O₄ nanorods were successfully synthesized by a template‐engaged method. Porous Mn₃O₄ nanorods were used as self‐sacrificial templates, into which LiOH was infiltrated by a vacuum‐assisted impregnation route. When used as cathode materials for lithium‐ion batteries, the spinel LiMn₂O₄ nanorods exhibited superior long cycle life owing to the one‐dimensional nanorod structure, single‐crystallinity, and Li‐rich effect. LiMn₂O₄ nanorods retained 95.6 % of the initial capacity after 1000 cycles at 3C rate. In particular, the nanorod morphology of the spinel LiMn₂O₄ was well‐preserved after a long‐term cycling, suggesting the ultrahigh structural stability of the single crystalline spinel LiMn₂O₄ nanorods. This result shows the promising applications of single‐crystalline spinel LiMn₂O₄ nanorods as cathode materials for lithium‐ion batteries with high rate capability and long cycle life.     

Synthesis of Mesoporous Wall‐Structured TiO2 on Reduced Graphene Oxide Nanosheets with High Rate Performance for Lithium‐Ion Batteries

Mesoporous wall‐structured TiO₂ on reduced graphene oxide (RGO) nanosheets were successfully fabricated through a simple hydrothermal process without any surfactants and annealed at 400 °C for 2 h under argon. The obtained mesoporous structured TiO₂–RGO composites had a high surface area (99 0307 m² g^?1) and exhibited excellent electrochemical cycling (a reversible capacity of 260 mAh g^?1 at 1.2 C and 180 mAh g^?1 at 5 C after 400 cycles), demonstrating it to be a promising method for the development of high‐performance Li‐ion batteries.     

Scalable Synthesis of One-Dimensional Mesoporous ZnMnO3 Nanorods with Ultra-Stable and High Rate Capability for Efficient Lithium Storage

The cost-efficient ZnMnO₃ has attracted increasing attention as a prospective anode candidate for advanced lithium-ion batteries (LIBs) owing to its resourceful abundance, large lithium storage capacity and low operating voltage. However, its practical application is still seriously limited by the modest cycling and rate performances. Herein, a facile design to scalable synthesize unique one-dimensional (1D) mesoporous ZnMnO₃ nanorods (ZMO-NRs) composed of nanoscale particles (≈11 nm) is reported. The 1D mesoporous structure and nanoscale building blocks of the ZMO-NRs effectively promote the transport of ions/electrons, accommodate severe volume changes, and expose more active sites for lithium storage. Benefiting from these appealing structural merits, the obtained ZMO-NRs anode exhibits excellent rate behavior (≈454 mAh g⁻¹ at 2 A g⁻¹) and ultra-long term cyclic performance (≈949.7 mAh g⁻¹ even over 500 cycles at 0.5 A g⁻¹) for efficient lithium storage. Additionally, the LiNi_0.8Co_0.1Mn_0.1O₂//ZMO-NRs full cell presents a practical energy density (≈192.2 Wh kg⁻¹) and impressive cyclability with approximately 91 % capacity retention over 110 cycles. This highlights that the ZMO-NRs product is a highly promising high-rate and stable electrode candidate towards advanced LIBs in electronic devices and sustainable energy storage applications.     

Clewlike ZnV2O4 Hollow Spheres: Nonaqueous Sol–Gel Synthesis,Formation Mechanism,and Lithium Storage Properties

Hollow ZnV₂O₄ microspheres with a clewlike feature were synthesized by reacting zinc nitrate hexahydrate and ammonium metavanadate in benzyl alcohol at 180 °C for the first time. GC–MS analysis revealed that the organic reactions that occurred in this study were rather different from those in benzyl alcohol based nonaqueous sol–gel systems with metal alkoxides, acetylacetonates, and acetates as the precursors. Time‐dependent experiments revealed that the growth mechanism of the clewlike ZnV₂O₄ hollow microspheres might involve a unique multistep pathway. First, the generation and self‐assembly of ZnO nanosheets into metastable hierarchical microspheres as well as the generation of VO₂ particles took place quickly. Then, clewlike ZnV₂O₄ hollow spheres were gradually produced by means of a repeating reaction–dissolution (RD) process. In this process, the outside ZnO nanosheets of hierarchical microspheres would first react with neighboring vanadium ions and benzyl alcohol and also serve as the secondary nucleation sites for the subsequently formed ZnV₂O₄ nanocrystals. With the reaction proceeding, the interior ZnO would dissolve and then spontaneously diffuse outwards to nucleate as ZnO nanocrystals on the preformed ZnV₂O₄ nanowires. These renascent ZnO nanocrystals would further react with VO₂ and benzyl alcohol, ultimately resulting in the final formation of a hollow spatial structure. The lithium storage ability of clewlike ZnV₂O₄ hollow microspheres was studied. When cycled at 50 mA g^?1 in the voltage range of 0.01–3 V, this peculiarly structured ZnV₂O₄ electrode delivered an initial reversible capacity of 548 mAh g^?1 and exhibited almost stable cycling performance to maintain a capacity of 524 mAh g^?1 over 50 cycles. This attractive lithium storage performance suggests that the resulting clewlike ZnV₂O₄ hollow spheres are promising for lithium‐ion batteries.     

Mesoporous Nickel Oxide Nanowires: Hydrothermal Synthesis,Characterisation and Applications for Lithium‐Ion Batteries and Supercapacitors with Superior Performance

Mesoporous nickel oxide nanowires were synthesized by a hydrothermal reaction and subsequent annealing at 400 °C. The porous one‐dimensional nanostructures were analysed by field‐emission SEM, high‐resolution TEM and N₂ adsorption/desorption isotherm measurements. When applied as the anode material in lithium‐ion batteries, the as‐prepared mesoporous nickel oxide nanowires demonstrated outstanding electrochemical performance with high lithium storage capacity, satisfactory cyclability and an excellent rate capacity. They also exhibited a high specific capacitance of 348 F g^?1 as electrodes in supercapacitors.     

Multiple Ambient Hydrolysis Deposition of Tin Oxide into Nanoporous Carbon To Give a Stable Anode for Lithium‐Ion Batteries

A novel ambient hydrolysis deposition (AHD) methodology that employs sequential water adsorption followed by a hydrolysis reaction to infiltrate SnO₂ nanoparticles into the nanopores of mesoporous carbon in a conformal and controllable manner is introduced. The empty space in the SnO₂/C composites can be adjusted by varying the number of AHD cycles. An SnO₂/C composite with an intermediate SnO₂ loading exhibited an initial specific delithiation capacity of 1054 mAh g^?1 as an anode for Li‐ion batteries. The capacity contribution from SnO₂ in the composite electrode approaches the theoretical capacity of SnO₂ (1494 mAh g^?1) if both Sn alloying and SnO₂ conversion reactions are considered to be reversible. The composite shows a specific capacity of 573 mAh g^?1 after 300 cycles, that is, one of the most stable cycling performances for SnO₂/mesoporous carbon composites. The results demonstrated the importance of well‐tuned empty space in nanostructured composites to accommodate expansion of the electrode active mass during alloying/dealloying and conversion reactions.     

Facile Microstructure Control of Mesoporous Co1.29Ni1.71O4 and the Effect of the Microstructure on Lithium‐Storage Performance

A simple and efficient pathway has been designed and developed to synthesize mesoporous Co_1.29Ni_1.71O₄ nanostructures without the use of any templates. By adjusting the volume ratio of water to ethanol, the Co_1.29Ni_1.71O₄ microstructure can be facilely controlled, and different nanostructures such as microflowers, nanorods, and nanoparticles were obtained. All three as‐synthesized samples have a mesoporous structure, but with different pore‐size distributions, in which the nanorod sample exhibits the highest capacity, good rate capability, and cycle stability as an anode material in lithium‐ion batteries (LIBs). The possible reason might be that the one‐dimensional structure of the nanorods accounts for their higher conductivity relative to microflowers and nanoparticles, and their high conductivity coupled with their mesoporous structure might contribute to their excellent electrochemical performance.     

Formulation of Blended‐Lithium‐Salt Electrolytes for Lithium Batteries

Blended‐salt electrolytes showing synergistic effects have been formulated by simply mixing several lithium salts in an electrolyte. In the burgeoning field of next‐generation lithium batteries, blended‐salt electrolytes have enabled great progress to be made. In this Review, the development of such blended‐salt electrolytes is examined in detail. The reasons for formulating blended‐salt electrolytes for lithium batteries include improvement of thermal stability (safety), inhibition of aluminum‐foil corrosion of the cathode current collector, enhancement of performance over a wide temperature range (or at a high or low temperature), formation of favorable interfacial layers on both electrodes, protection of the lithium metal anode, and attainment of high ionic conductivity. Herein, we highlight key scientific issues related to the formulation of blended‐salt electrolytes for lithium batteries.     

Solvated Graphene Frameworks as High‐Performance Anodes for Lithium‐Ion Batteries

A solvent‐exchange approach for the preparation of solvated graphene frameworks as high‐performance anode materials for lithium‐ion batteries is reported. The mechanically strong graphene frameworks exhibit unique hierarchical solvated porous networks and can be directly used as electrodes with a significantly improved electrochemical performance compared to unsolvated graphene frameworks, including very high reversible capacities, excellent rate capabilities, and superior cycling stabilities.     

Freeze‐Drying‐Assisted Synthesis of Hierarchically Porous Carbon/Germanium Hybrid for High‐Efficiency Lithium‐Ion Batteries

Herein, an approach is reported to prepare porous a carbon/Ge (C/Ge) hybrid. In this hybrid, Ge nanoparticles are closely embedded in a highly conductive and flexible carbon matrix. Such a hybrid features a high surface area (128.0 m² g^?1) and a hierarchical micropore–mesopore structure. When used as an anode material in lithium‐ion batteries (LIBs), the as‐prepared hybrid [C/Ge (60.37 %)] exhibits an improved lithium storage performance with regard to its capacity and rate capability compared to its counterparts. More specifically, it can maintain a specific capacity as high as 906 mAh g^?1 at a high current density of 0.6 A g^?1 after 50 cycles. The excellent lithium storage performance of the C/Ge (60.37 %) sample can be attributed to synergetic effects between the carbon matrix and Ge nanoparticles. The method we adopted is simple and effective, and can be extended to fabricate other nanomaterials.     

An Ultrastable Anode for Long‐Life Room‐Temperature Sodium‐Ion Batteries

Sodium‐ion batteries are important alternative energy storage devices that have recently come again into focus for the development of large‐scale energy storage devices because sodium is an abundant and low‐cost material. However, the development of electrode materials with long‐term stability has remained a great challenge. A novel negative‐electrode material, a P2‐type layered oxide with the chemical composition Na_2/3Co_1/3Ti_2/3O₂, exhibits outstanding cycle stability (ca. 84.84 % capacity retention for 3000 cycles, very small decrease in the volume (0.046 %) after 500 cycles), good rate capability (ca. 41 % capacity retention at a discharge/charge rate of 10 C), and a usable reversible capacity of about 90 mAh g^?1 with a safe average storage voltage of approximately 0.7 V in the sodium half‐cell. This P2‐type layered oxide is a promising anode material for sodium‐ion batteries with a long cycle life and should greatly promote the development of room‐temperature sodium‐ion batteries.