Mechanisms in the Reaction of Palladium(II)–π‐Allyl Complexes with Aryl Halides: Evidence for NHC Exchange Between Two Palladium Complexes

A detailed experimental and DFT study (PBE level) of the reaction of [Pd(η³‐C₃H₅)(tmiy)(PR₃)]BF₄ (tmiy=tetramethylimidazolin‐2‐ylidene, PR₃=phosphane), precursors to monoligated Pd⁰ species, with aryl electrophiles yielding 2‐arylimidazolium salt is reported. Experiments establish that an autocatalytic ligand transfer mechanism is preferred over Pd^IV and σ‐bond metathesis pathways, and that transmetalation is the rate‐determining step. Calculations indicate that the key step involves the concerted exchange of NHC and iodo ligands between two different Pd^II complexes. This is corroborated by experimental results showing the slower reaction of complexes containing the bulkier dipdmiy (dipdmiy = diisopropyldimethylimidazolin‐2‐ylidene).     

Reversible Dimerization of Phosphine‐Stabilized Silylenes by Silylene Insertion into SiII–H and SiII–Cl σ‐Bonds at Room Temperature

Contrary to the classical silylene dimerization leading to a disilene structure, phosphine stabilized hydro‐ and chloro‐silylenes ( 2 a , b ) undergo an unique dimerization via silylene insertion into Si? X σ‐bonds (X=H, Cl), which is reversible at room temperature. DFT calculations indicate that the insertion reaction proceeds in one step in a concerted manner.     

Redox‐Controlled Olefin (Co)Polymerization Catalyzed by Ferrocene‐Bridged Phosphine‐Sulfonate Palladium Complexes

The facile and reversible interconversion between neutral and oxidized forms of palladium complexes containing ferrocene‐bridged phosphine sulfonate ligands was demonstrated. The activity of these palladium complexes could be controlled using redox reagents during ethylene homopolymerization, ethylene/methyl acrylate copolymerization, and norbornene oligomerization. Specifically in norbornene oligomerization, the neutral complexes were not active at all whereas the oxidized counterparts showed appreciable activity. In situ switching between the neutral and oxidized forms resulted in an interesting “off” and “on” behavior in norbornene oligomerization. This work provides a new strategy to control the olefin polymerization process.     

Synthesis,Characterization, and Theoretical Investigation of Two‐Coordinate Palladium(0) and Platinum(0) Complexes Utilizing π‐Accepting Carbenes

An elegant general synthesis route for the preparation of two coordinate palladium(0) and platinum(0) complexes was developed by reacting commercially available tetrakis(triphenylphosphine)palladium/platinum with π‐accepting cyclic alkyl(amino) carbenes (cAACs). The complexes are characterized by NMR spectroscopy, mass spectrometry, and single‐crystal X‐ray diffraction. The palladium complexes exhibit sharp color changes (crystallochromism) from dark maroon to bright green if the C‐Pd‐C bond angle is sharpened by approximately 6°, which is chemically feasible by elimination of one lattice THF solvent molecule. The analogous dark orange‐colored platinum complexes are more rigid and thus do not show this phenomenon. Additionally, [(cAAC)₂Pd/Pt] complexes can be quasi‐reversibly oxidized to their corresponding [(cAAC)₂Pd/Pt]⁺ cations, as evidenced by cyclic voltammetry measurements. The bonding and stability are studied by theoretical calculations.     

Palladium‐Catalyzed Intramolecular Carbene Insertion into C(sp3)−H Bonds

A palladium‐catalyzed carbene insertion into C(sp³)?H bonds leading to pyrrolidines was developed. The coupling reaction can be catalyzed by both Pd⁰ and Pd^II, is regioselective, and shows a broad functional group tolerance. This reaction is the first example of palladium‐catalyzed C(sp³)?C(sp³) bond assembly starting from diazocarbonyl compounds. DFT calculations revealed that this direct C(sp³)?H bond functionalization reaction involves an unprecedented concerted metalation–deprotonation step.     

Coordination Chemistry of Highly Hemilabile Bidentate Sulfoxide N‐Heterocyclic Carbenes with Palladium(II)

Imidazolium salts, [RS(O)? CH₂(C₃H₃N₂)Mes]Cl (R=Me ( L1 a ), Ph ( L1 b )); Mes=mesityl), make convenient carbene precursors. Palladation of L1 a affords the monodentate dinuclear complex, [(PdCl₂{MeS(O)CH₂(C₃H₂N₂)Mes})₂] ( 2 a ), which is converted into trans‐[PdCl₂(NHC)₂] (trans‐ 4 a ; N‐heterocyclic carbene) with two rotamers in anti and syn configurations. Complex trans‐ 4 a can isomerize into cis‐ 4 a (anti) at reflux in acetonitrile. Abstraction of chlorides from 4 a or 4 b leads to the formation of a new dication: trans‐[Pd{RS(O)CH₂(C₃H₂N₂)Mes}₂](PF₆)₂ (R=Me ( 5 a ), Ph ( 5 b )). The X‐ray structure of 5 a provides evidence that the two bidentate SO? NHC ligands at palladium(II) are in square‐planar geometry. Two sulfoxides are sulfur‐ and oxygen‐bound, and constitute five‐ and six‐membered chelate rings with the metal center, respectively. In acetonitrile, complexes 5 a or 5 b spontaneously transform into cis‐[Pd(NHC)₂(NCMe)₂](PF₆)₂. Similar studies of thioether–NHCs have also been examined for comparison. The results indicate that sulfoxides are more labile than thioethers.     

The final steps of the Oppolzer cyclization: mechanism of the insertion of alkenes into allylpalladium(II) complexes

We report here the results of a computational study on the the mechanism of the Oppolzer cyclization. These results lead us to conclude that the insertion of olefins in Pd-allyl complexes probably takes place directly from the eta(3)-allyl species. The presence of a phosphane ligand in the reagents plays the role of enhancing the electron density on the Pd atom; this makes the alkene moiety more reactive towards insertion by back-donation from the metal. The results also indicate that the configuration of the new stereogenic centers is fixed in the insertion of the alkene into the (eta(3)-allyl)palladium species.     

Insights into the Intramolecular Donor Stabilisation of Organostannylene Palladium and Platinum Complexes: Syntheses,Structures and DFT Calculations

The syntheses of the transition metal complexes cis‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂C₆H₂SnCl)₂MX₂] ( 1 , M=Pd, X=Cl; 2 , M=Pd, X=Br; 3 , M=Pd, X=I; 4 , M=Pt, X=Cl), cis‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnCl}₂MX₂] ( 5 , M=Pd, X=I; 6 , M=Pt, X=Cl), trans‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnI}₂PtI₂] ( 7 ) and trans‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂ C₆H₂SnCl)PdI₂]₂ ( 8 ) are reported. Also reported is the serendipitous formation of the unprecedented complexes trans‐[(4‐tBu‐2,6‐{P(O)(OiPr)₂}₂C₆H₂SnCl)₂ Pt(SnCl₃)₂] ( 10 ) and [(4‐tBu‐2,6‐{P(O) (OiPr)₂}₂C₆H₂SnCl)₃Pt(SnCl₃)₂] ( 11 ). The compounds were characterised by elemental analyses, ¹H, ¹³C, ³¹P, ¹¹⁹Sn and ¹⁹⁵Pt NMR spectroscopy, single‐crystal X‐ray diffraction analysis, UV/Vis spectroscopy and, in the cases of compounds 1 , 3 and 4 , also by Mössbauer spectroscopy. All the compounds show the tin atoms in a distorted trigonal‐bipyramidal environment. The Mössbauer spectra suggest the tin atoms to be present in the oxidation state III. The kinetic lability of the complexes was studied by redistribution reactions between compounds 1 and 3 as well as between 1 and cis‐[{2,6‐(Me₂NCH₂)₂C₆H₃SnCl}₂PdCl₂]. DFT calculations provided insights into both the bonding situation of the compounds and the energy difference between the cis and trans isomers. The latter is influenced by the donor strength of the pincer‐type ligands.     

Single‐Point Remote Control of Flapping Motion in Clothespin‐Shaped Bimetallic Palladium Complexes Based on the N(sp2)–N(sp3) Interconversion in Amide Functionalities

The synthesis, structure, and flapping motion of clothespin‐shaped binuclear trans‐bis(salicylaldiminato)palladium(II) complexes (anti‐ 1 ) with 4‐azaheptamethylene linkers bearing amide ( a – g ), urethane ( h ), or urea ( i ) functionalities are described in this report. Various 2D ¹H NMR experiments and XRD analyses indicate that the amide‐ and urethane‐linked anti‐ 1 a , b , d – h complexes exist as equilibrated mixtures of major and minor conformers I and II in CDCl₃, whereas the complexes anti‐ 1 c and i were observed as a single species. The mapping of NOESY cross‐peaks between conformers I and II revealed that the equilibration of the major and minor conformers of anti‐ 1 a , b , d – h proceeds by two pathways, namely a nonrotatory flapping motion of the coordinated blades and a nonflapping rotation of C?N bonds, whereas the equilibration of anti‐ 1 c proceeds by simultaneous flapping and rotation motions. Kinetic studies carried out by means of ¹H–¹H EXSY experiments revealed that 1) the ΔG^≠_298K values for the flapping motion are controlled remotely by the steric and electronic effects of the RCON functionalities and 2) the activation parameters for the nonrotatory flapping process are identical to those for the nonflapping peptide rotation in the complexes anti‐ 1 a,b,d – h , which indicates that the present multistep conformational transformation induced by the flapping motion is controlled by the rate‐determining pyramidalization/depyramidalization (i.e., sp²/sp³ interconversion) of the nitrogen atoms of the functionalities. The static and controllable molecular mobility of anti‐ 1 bearing peptide linkers has been discussed by comparison with the dynamic behavior of its analogues anti‐ 2 – 4 with flexible polymethylene linkers.     

The Mixed Gold–Palladium Polyoxo‐Noble‐Metalate [NaAuIII4PdII8O8(AsO4)8]11−

The first fully inorganic, discrete gold–palladium–oxo complex [NaAu^III₄Pd^II₈O₈(AsO₄)₈]^11? has been synthesized in aqueous medium. The combination of single‐crystal XRD, elemental analysis, mass spectrometry, and DFT calculations allowed establishing the structure and composition of the novel polyanion, and UV/Vis studies suggest that it is stable in neutral aqueous media.     

Atomic Imaging of Subsurface Interstitial Hydrogen and Insights into Surface Reactivity of Palladium Hydrides

Resolving interstitial hydrogen atoms at the surfaces and interfaces is crucial for understanding the mechanical and physicochemical properties of metal hydrides. Although palladium (Pd) hydrides hold important applications in hydrogen storage and electrocatalysis, the atomic position of interstitial hydrogen at Pd hydride near surfaces still remains undetermined. We report the first direct imaging of subsurface hydrogen atoms absorbed in Pd nanoparticles by using differentiated and integrated differential phase contrast within an aberration-corrected scanning transmission electron microscope. In contrast to the well-established octahedral interstitial sites for hydrogen in the bulk, subsurface hydrogen atoms are directly identified to occupy the tetrahedral interstices. DFT calculations show that the amount and the occupation type of subsurface hydrogen atoms play an indispensable role in fine-tuning the electronic structure and associated chemical reactivity of the Pd surface.     

Decarboxylative Palladium(II)‐Catalyzed Synthesis of Aryl Amidines from Aryl Carboxylic Acids: Development and Mechanistic Investigation

A fast and convenient synthesis of aryl amidines starting from carboxylic acids and cyanamides is reported. The reaction was achieved by palladium(II)‐catalysis in a one‐step microwave protocol using [Pd(O₂CCF₃)₂], 6‐methyl‐2,2′‐bipyridyl and trifluoroacetic acid (TFA) in N‐methylpyrrolidinone (NMP), providing the corresponding aryl amidines in moderate to excellent yields. The protocol is very robust with regards to the cyanamide coupling partner but requires electron‐rich ortho‐substituted aryl carboxylic acids. Mechanistic insight was provided by a DFT investigation and direct ESI‐MS studies of the reaction. The results of the DFT study correlated well with the experimental findings and, together with the ESI‐MS study, support the suggested mechanism. Furthermore, a scale‐out (scale‐up) was performed with a non‐resonant microwave continuous‐flow system, achieving a maximum throughput of 11 mmol h^?1 by using a glass reactor with an inner diameter of 3 mm at a flow rate of 1 mL min^?1.     

Insights into CO/styrene copolymerization by using Pd(II) catalysts containing modular pyridine-imidazoline ligands

Continuing our studies into the effect that N-N' ligands have on CO/styrene copolymerization, we prepared new C(1)-symmetrical pyridine-imidazoline ligands with 4',5'-cis stereochemistry in the imidazoline ring (5) and 4',5'-trans stereochemistry (6-10) and compared them with our previously reported ligands (1-4). Their coordination to neutral methylpalladium(II) (5 a-10 a) and cationic complexes (5 b-10 b), investigated in solution by NMR spectroscopy, indicates that both the electronic and steric properties of the imidazolines determine the stereochemistry of the palladium complexes. The crystal structures of two neutral palladium precursors [Pd(Me)(2-n)Cl(n)(N-N')] (n=1 for 8 a; n=2 for 9 a') show that the Pd-N coordination distances and the geometrical distortions in the imidazoline ring depend on the electronic nature of the substituents in the imidazoline fragment. Density functional calculations performed on selected neutral and cationic palladium complexes compare well with NMR and X-ray data. The calculations also account for the formation of only one or two stereoisomers of the cationic complexes. The performance of the cationic complexes as catalyst precursors in CO/4-tert-butylstyrene copolymerization under mild pressures and temperatures was analyzed in terms of the productivity and degree of stereoregularity of the polyketones obtained. Insertion of CO into the Pd-Me bond, which was monitored by multinuclear NMR spectroscopy, shows that the N ligand influences the stereochemistry of the acyl species formed.     

Density Functional Theory Investigation of the Alkyl–Alkyl Negishi Cross‐Coupling Reaction Catalyzed by N‐Heterocyclic Carbene (NHC)–Pd Complexes

Why bigger is better : A “steric wall” created by the N‐(2,6‐diisopropylphenyl) substituent on the bulky NHC ligand IPr (1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene) guides the reactants to and from the Pd center through weak, fleeting (IPr)H–Pd interactions that help the oxidative addition intermediate escape “the anti‐trap”. The alternative “side” approach leads to transmetalation (the rate‐limiting step) for which a novel Pd–Zn interaction was identified.

     

Mechanistic Insights into Palladium‐Catalyzed Silylation of Aryl Iodides with Hydrosilanes through a DFT Study

The catalytic cycles of palladium‐catalyzed silylation of aryl iodides, which are initiated by oxidative addition of hydrosilane or aryl iodide through three different mechanisms characterized by intermediates R₃Si−Pd^II−H (Cycle A), Ar−Pd^II−I (Cycle B), and Pd^IV (Cycle C), have been explored in detail by hybrid DFT. Calculations suggest that the chemical selectivity and reactivity of the reaction depend on the ligation state of the catalyst and specific reaction conditions, including feeding order of substrates and the presence of base. For less bulky biligated catalyst, Cycle C is energetically favored over Cycle A, through which the silylation process is slightly favored over the reduction process. Interestingly, for bulky monoligated catalyst, Cycle B is energetically more favored over generally accepted Cycle A, in which the silylation channel is slightly disfavored in comparison to that of the reduction channel. Moreover, the inclusion of base in this channel allows the silylated product become dominant. These findings offer a good explanation for the complex experimental observations. Designing a reaction process that allows the oxidative addition of palladium(0) complex to aryl iodide to occur prior to that with hydrosilane is thus suggested to improve the reactivity and chemoselectivity for the silylated product by encouraging the catalytic cycle to proceed through Cycles B (monoligated Pd⁰ catalyst) or C (biligated Pd⁰ catalyst), instead of Cycle A.