Electrochemical Properties of Fiber‐in‐Tube‐ and Filled‐Structured TiO2 Nanofiber Anode Materials for Lithium‐Ion Batteries

Phase‐pure anatase TiO₂ nanofibers with a fiber‐in‐tube structure were prepared by the electrospinning process. The burning of titanium‐oxide‐carbon composite nanofibers with a filled structure formed as an intermediate product under an oxygen atmosphere produced carbon‐free TiO₂ nanofibers with a fiber‐in‐tube structure. The sizes of the nanofiber core and hollow nanotube were 140 and 500 nm, respectively. The heat treatment of the electrospun nanofibers at 450 and 500 °C under an air atmosphere produced grey and white filled‐structured TiO₂ nanofibers, respectively. The initial discharge capacities of the TiO₂ nanofibers with the fiber‐in‐tube and filled structures and the commercial TiO₂ nanopowders were 231, 134, and 223 mA h g^?1, respectively, and their corresponding charge capacities were 170, 100, and 169 mA h g^?1, respectively. The 1000th discharge capacities of the TiO₂ nanofibers with the fiber‐in‐tube and filled structures and the commercial TiO₂ nanopowders were 177, 64, and 101 mA h g^?1, respectively, and their capacity retentions measured from the second cycle were 89, 82, and 52 %, respectively. The TiO₂ nanofibers with the fiber‐in‐tube structure exhibited low charge transfer resistance and structural stability during cycling and better cycling and rate performances than the TiO₂ nanofibers with filled structures and the commercial TiO₂ nanopowders.     

High‐Loading Nano‐SnO2 Encapsulated in situ in Three‐Dimensional Rigid Porous Carbon for Superior Lithium‐Ion Batteries

Tin oxide nanoparticles (SnO₂ NPs) have been encapsulated in situ in a three‐dimensional ordered space structure. Within this composite, ordered mesoporous carbon (OMC) acts as a carbon framework showing a desirable ordered mesoporous structure with an average pore size (≈6 nm) and a high surface area (470.3 m² g^?1), and the SnO₂ NPs (≈10 nm) are highly loaded (up to 80 wt %) and homogeneously distributed within the OMC matrix. As an anode material for lithium‐ion batteries, a SnO₂@OMC composite material can deliver an initial charge capacity of 943 mAh g^?1 and retain 68.9 % of the initial capacity after 50 cycles at a current density of 50 mA g^?1, even exhibit a capacity of 503 mA h g^?1 after 100 cycles at 160 mA g^?1. In situ encapsulation of the SnO₂ NPs within an OMC framework contributes to a higher capacity and a better cycling stability and rate capability in comparison with bare OMC and OMC ex situ loaded with SnO₂ particles (SnO₂/OMC). The significantly improved electrochemical performance of the SnO₂@OMC composite can be attributed to the multifunctional OMC matrix, which can facilitate electrolyte infiltration, accelerate charge transfer, and lithium‐ion diffusion, and act as a favorable buffer to release reaction strains for lithiation/delithiation of the SnO₂ NPs.     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

Preparation of Li2SnO3 and its application in lithium‐ion batteries

Tin‐based oxide Li₂SnO₃ has been synthesized by a hydrothermal route as negative material for lithium‐ion batteries. The microstructure and electrochemical properties of the as‐synthesized materials were investigated by some characterizations means and electrochemical measurements. The as‐synthesized Li₂SnO₃ is a porous rod, which is composed of many uniform and regular nano‐flakes with a size of 50–60 nm. Li₂SnO₃ also displays an electrochemical performance with high capacity and good cycling stability (510.2 mAh g^?1 after 50 cycles at a current density of 60 mA g^?1 between 0.0 V and 2.0 V verusus Li/Li⁺). Copyright © 2013 John Wiley & Sons, Ltd.     

General Approach to Single and Hybrid Metal Oxide Fiber Structures for High‐Performance Lithium‐Ion Batteries

Owing to the high specific capacity and energy density, metal oxides have become very promising electrodes for lithium‐ion batteries (LIBs). However, poor electrical conductivity accompanied with inferior cycling stability resulting from large volume changes are the main obstacles to achieve a high reversible capacity and stable cyclability. Herein, a facile and general approach to fabricate SnO₂, Fe₂O₃ and Fe₂O₃/SnO₂ fibers is proposed. The appealing structural features are favorable for offering a shortened lithium‐ion diffusion length, easy access for the electrolyte and reduced volume variation when used as anodes in LIBs. As a consequence, both single and hybrid oxides show satisfactory reversible capacities (1206 mAh g^?1 for Fe₂O₃ and 1481 mAh g^?1 for Fe₂O₃/SnO₂ after 200 cycles at 200 mA g^?1) and long lifespans.     

Pyrene‐Anderson‐Modified CNTs as Anode Materials for Lithium‐Ion Batteries

An organo‐functionalized polyoxometalate (POM)–pyrene hybrid (Py‐Anderson) has been used for noncovalent functionalization of carbon nanotubes (CNTs) to give a Py‐Anderson‐CNT nanocomposite through π–π interactions. The as‐synthesized nanocomposite was used as the anode material for lithium‐ion batteries, and shows higher discharge capacities and better rate capacity and cycling stability than the individual components. When the current density was 0.5 mA cm^?2, the nanocomposite exhibited an initial discharge capacity of 1898.5 mA h g^?1 and a high discharge capacity of 665.3 mA h g^?1 for up to 100 cycles. AC impedance spectroscopy provides insight into the electrochemical properties and the charge‐transfer mechanism of the Py‐Anderson‐CNTs electrode.     

Reduced Graphene Oxide‐Supported TiO2 Fiber Bundles with Mesostructures as Anode Materials for Lithium‐Ion Batteries

Although the synthesis of mesoporous materials is well established, the preparation of TiO₂ fiber bundles with mesostructures, highly crystalline walls, and good thermal stability on the RGO nanosheets remains a challenge. Herein, a low‐cost and environmentally friendly hydrothermal route for the synthesis of RGO nanosheet‐supported anatase TiO₂ fiber bundles with dense mesostructures is used. These mesostructured TiO₂‐RGO materials are used for investigation of Li‐ion insertion properties, which show a reversible capacity of 235 mA h g^?1 at 200 mA g^?1 and 150 mA h g^?1 at 1000 mA g^?1 after 1000 cycles. The higher specific surface area of the new mesostructures and high conductive substrate (RGO nanosheets) result in excellent lithium storage performance, high‐rate performance, and strong cycling stability of the TiO₂‐RGO composites.     

Boron‐Doped,Carbon‐Coated SnO2/Graphene Nanosheets for Enhanced Lithium Storage

Heteroatom doping is an effective method to adjust the electrochemical behavior of carbonaceous materials. In this work, boron‐doped, carbon‐coated SnO₂/graphene hybrids (BCTGs) were fabricated by hydrothermal carbonization of sucrose in the presence of SnO₂/graphene nanosheets and phenylboronic acid or boric acid as dopant source and subsequent thermal treatment. Owing to their unique 2D core–shell architecture and B‐doped carbon shells, BCTGs have enhanced conductivity and extra active sites for lithium storage. With phenylboronic acid as B source, the resulting hybrid shows outstanding electrochemical performance as the anode in lithium‐ion batteries with a highly stable capacity of 1165 mA h g^?1 at 0.1 A g^?1 after 360 cycles and an excellent rate capability of 600 mA h g^?1 at 3.2 A g^?1, and thus outperforms most of the previously reported SnO₂‐based anode materials.     

Kilogram‐Scale Production of SnO2 Yolk–Shell Powders by a Spray‐Drying Process Using Dextrin as Carbon Source and Drying Additive

A simple and general method for the large‐scale production of yolk–shell powders with various compositions by a spray‐drying process is reported. Metal salt/dextrin composite powders with a spherical and dense structure were obtained by spray drying and transformed into yolk–shell powders by simple combustion in air. Dextrin plays a key role in the preparation of precursor powders for fabricating yolk–shell powders by spray drying. Droplets containing metal salts and dextrin show good drying characteristics even in a severe environment of high humidity. Sucrose, glucose, and polyvinylpyrrolidone are widely used as carbon sources in the preparation of metal oxide/carbon composite powders; however, they are not appropriate for large‐scale spray‐drying processes because of their caramelization properties and adherence to the surface of the spray dryer. SnO₂ yolk–shell powders were studied as the first target material in the spray‐drying process. Combustion of tin oxalate/dextrin composite powders at 600 °C in air produced single‐shelled SnO₂ yolk–shell powders with the configuration SnO₂@void@SnO₂. The SnO₂ yolk–shell powders prepared by the simple spray‐drying process showed superior electrochemical properties, even at high current densities. The discharge capacities of the SnO₂ yolk–shell powders at a current density of 2000 mA g^?1 were 645 and 570 mA h g^?1 for the second and 100th cycles, respectively; the corresponding capacity retention measured for the second cycle was 88 %.     

Amidation‐Dominated Re‐Assembly Strategy for Single‐Atom Design/Nano‐Engineering: Constructing Ni/S/C Nanotubes with Fast and Stable K‐Storage

An amidation‐dominated re‐assembly strategy is developed to prepare uniform single atom Ni/S/C nanotubes. In this re‐assembly process, a single‐atom design and nano‐structured engineering are realized simultaneously. Both the NiO₅ single‐atom active centers and nanotube framework endow the Ni/S/C ternary composite with accelerated reaction kinetics for potassium‐ion storage. Theoretical calculations and electrochemical studies prove that the atomically dispersed Ni could enhance the convention kinetics and decrease the decomposition energy barrier of the chemically‐absorbed small‐molecule sulfur in Ni/S/C nanotubes, thus lowering the electrode reaction overpotential and resistance remarkably. The mechanically stable nanotube framework could well accommodate the volume variation during potassiation/depotassiation process. As a result, a high K‐storage capacity of 608 mAh g^?1 at 100 mA g^?1 and stable cycling capacity of 330.6 mAh g^?1 at 1000 mA g^?1 after 500 cycles are achieved.     

CNT@Fe3O4@C Coaxial Nanocables: One‐Pot,Additive‐Free Synthesis and Remarkable Lithium Storage Behavior

By using carbon nanotubes (CNTs) as a shape template and glucose as a carbon precursor and structure‐directing agent, CNT@Fe₃O₄@C porous core/sheath coaxial nanocables have been synthesized by a simple one‐pot hydrothermal process. Neither a surfactant/ligand nor a CNT pretreatment is needed in the synthetic process. A possible growth mechanism governing the formation of this nanostructure is discussed. When used as an anode material of lithium‐ion batteries, the CNT@Fe₃O₄@C nanocables show significantly enhanced cycling performance, high rate capability, and high Coulombic efficiency compared with pure Fe₂O₃ particles and Fe₃O₄/CNT composites. The CNT@Fe₃O₄@C nanocables deliver a reversible capacity of 1290 mA h g^?1 after 80 cycles at a current density of 200 mA g^?1, and maintain a reversible capacity of 690 mA h g^?1 after 200 cycles at a current density of 2000 mA g^?1. The improved lithium storage behavior can be attributed to the synergistic effect of the high electronic conductivity support and the inner CNT/outer carbon buffering matrix.     

A Nitrogen‐Rich 2D sp2‐Carbon‐Linked Conjugated Polymer Framework as a High‐Performance Cathode for Lithium‐Ion Batteries

A two‐dimensional (2D) sp²‐carbon‐linked conjugated polymer framework (2D CCP‐HATN) has a nitrogen‐doped skeleton, a periodical dual‐pore structure and high chemical stability. The polymer backbone consists of hexaazatrinaphthalene (HATN) and cyanovinylene units linked entirely by carbon–carbon double bonds. Profiting from the shape‐persistent framework of 2D CCP‐HATN integrated with the electrochemical redox‐active HATN and the robust sp² carbon‐carbon linkage, 2D CCP‐HATN hybridized with carbon nanotubes shows a high capacity of 116 mA h g^?1, with high utilization of its redox‐active sites and superb cycling stability (91 % after 1000 cycles) and rate capability (82 %, 1.0 A g^?1 vs. 0.1 A g^?1) as an organic cathode material for lithium‐ion batteries.     

High‐Performance Lithium‐Ion Anodes with Hierarchically Assembled Single‐Crystal SnO2 Nanoflake Spheres

A large‐scale hierarchical assembly route is reported for the formation of SnO₂ on the nanoscale that contains rigid and robust spheres with irregular channels for rapid access of Li ions into the hierarchically structured interiors. Large volume changes during the process of Li insertion and extraction are accommodated by the SnO₂ nanoflake spheres’ internal porosity. The hierarchical SnO₂ nanoflake spheres exhibit good lithium storage properties with high capacity and long‐lasting performance when used as lithium‐ion anodes. A reversible capacity of 517 mA h g^?1, still greater than the theoretical capacity of graphite (372 mA h g^?1), after 50 charge–discharge cycles is attained. Meanwhile, the synthesis process is simple, inexpensive, safe, and broadly applicable, providing new avenues for the rational engineering of electrode materials with enhanced conductivity and power.     

Two‐Dimensional Cobalt‐/Nickel‐Based Oxide Nanosheets for High‐Performance Sodium and Lithium Storage

Two‐dimensional (2D) nanomaterials are one of the most promising types of candidates for energy‐storage applications due to confined thicknesses and high surface areas, which would play an essential role in enhanced reaction kinetics. Herein, a universal process that can be extended for scale up is developed to synthesise ultrathin cobalt‐/nickel‐based hydroxides and oxides. The sodium and lithium storage capabilities of Co₃O₄ nanosheets are evaluated in detail. For sodium storage, the Co₃O₄ nanosheets exhibit excellent rate capability (e.g., 179 mA h g^?1 at 7.0 A g^?1 and 150 mA h g^?1 at 10.0 A g^?1) and promising cycling performance (404 mA h g^?1 after 100 cycles at 0.1 A g^?1). Meanwhile, very impressive lithium storage performance is also achieved, which is maintained at 1029 mA h g^?1 after 100 cycles at 0.2 A g^?1. NiO and NiCo₂O₄ nanosheets are also successfully prepared through the same synthetic approach, and both deliver very encouraging lithium storage performances. In addition to rechargeable batteries, 2D cobalt‐/nickel‐based hydroxides and oxides are also anticipated to have great potential applications in supercapacitors, electrocatalysis and other energy‐storage‐/‐conversion‐related fields.     

Flame Spray Pyrolysis for Finding Multicomponent Nanomaterials with Superior Electrochemical Properties in the CoOx‐FeOx System for Use in Lithium‐Ion Batteries

High‐temperature flame spray pyrolysis is employed for finding highly efficient nanomaterials for use in lithium‐ion batteries. CoO_x‐FeO_x nanopowders with various compositions are prepared by one‐pot high‐temperature flame spray pyrolysis. The Co and Fe components are uniformly distributed over the CoO_x‐FeO_x composite powders, irrespective of the Co/Fe mole ratio. The Co‐rich CoO_x‐FeO_x composite powders with Co/Fe mole ratios of 3:1 and 2:1 have mixed crystal structures with CoFe₂O₄ and Co₃O₄ phases. However, Co‐substituted magnetite composite powders prepared from spray solutions with Co and Fe components in mole ratios of 1:3, 1:2, and 1:1 have a single phase. Multicomponent CoO_x‐FeO_x powders with a Co/Fe mole ratio of 2:1 and a mixed crystal structure with Co₃O₄ and CoFe₂O₄ phases show high initial capacities and good cycling performance. The stable reversible discharge capacities of the composite powders with a Co/Fe mole ratio of 2:1 decrease from 1165 to 820 mA h g^?1 as the current density is increased from 500 to 5000 mA g^?1; however, the discharge capacity again increases to 1310 mA h g^?1 as the current density is restored to 500 mA g^?1.     

2 D Manganese Vanadate Nanoflakes as High‐Performance Anode for Lithium‐Ion Batteries

Nanometer‐sized flakes of MnV₂O₆ were synthesized by a hydrothermal method. No surfactant, expensive metal salt, or alkali reagent was used. These MnV₂O₆ nanoflakes present a high discharge capacity of 768 mA h g^?1 at 200 mA g^?1, good rate capacity, and excellent cycling stability. Further investigation demonstrates that the nanoflake structure and the specific crystal structure make the prepared MnV₂O₆ a suitable material for lithium‐ion batteries.     

One‐Pot Fabrication of Hierarchical Nanosheet‐Based TiO2–Carbon Hollow Microspheres for Anode Materials of High‐Rate Lithium‐Ion Batteries

Hierarchical and hollow nanostructures have recently attracted considerable attention because of their fantastic architectures and tunable property for facile lithium ion insertion and good cycling stability. In this study, a one‐pot and unusual carving protocol is demonstrated for engineering hollow structures with a porous shell. Hierarchical TiO₂ hollow spheres with nanosheet‐assembled shells (TiO₂ NHS) were synthesized by the sequestration between the titanium source and 2,2′‐bipyridine‐5,5′‐dicarboxylic acid, and kinetically controlled etching in trifluoroacetic acid medium. In addition, annealing such porous nanostructures presents the advantage of imparting carbon‐doped functional performance to its counterpart under different atmospheres. Such highly porous structures endow very large specifics surface area of 404 m² g^?1 and 336 m² g^?1 for the as‐prepared and calcination under nitrogen gas. C/TiO₂ NHS has high capacity of 204 mA h g^?1 at 1 C and a reversible capacity of 105 mA h g^?1 at a high rate of 20 C, and exhibits good cycling stability and superior rate capability as an anode material for lithium‐ion batteries.     

Wintersweet‐Flower‐Like CoFe2O4/MWCNTs Hybrid Material for High‐Capacity Reversible Lithium Storage

CoFe₂O₄/multiwalled carbon nanotubes (MWCNTs) hybrid materials were synthesized by a hydrothermal method. Field emission scanning electron microscopy and transmission electron microscopy analysis confirmed the morphology of the as‐prepared hybrid material resembling wintersweet flower “buds on branches”, in which CoFe₂O₄ nanoclusters, consisting of nanocrystals with a size of 5–10 nm, are anchored along carbon nanotubes. When applied as an anode material in lithium ion batteries, the CoFe₂O₄/MWCNTs hybrid material exhibited a high performance for reversible lithium storage. In particular, the hybrid anode material delivered reversible lithium storage capacities of 809, 765, 539, and 359 mA h g^?1 at current densities of 180, 450, 900, and 1800 mA g^?1, respectively. The superior performance of CoFe₂O₄/MWCNTs hybrid materials could be ascribed to the synergistic pinning effect of the wintersweet‐flower‐like nanoarchitecture. This strategy could also be applied to synthesize other metal oxide/CNTs hybrid materials as high‐capacity anode materials for lithium ion batteries.     

Bimetal‐organic Framework‐derived Co9S8/ZnS@NC Heterostructures for Superior Lithium‐ion Storage

Heterostructure engineering of electrode materials, which is expected to accelerate the ion/electron transport rates driven by a built‐in internal electric field at the heterointerface, offers unprecedented promise in improving their cycling stability and rate performance. Herein, carbon nanotubes with Co₉S₈/ZnS heterostructures embedded in a N‐doped carbon framework (Co₉S₈/ZnS@NC) have been rationally designed via an in‐situ vapor chemical transformation strategy with the aid of thiophene, which not only acted as carbon source for the growth of carbon nanotubes but also as sulfur source for the sulfurization of metal Zn and Co. Density functional theory (DFT) calculation shows an about 3.24 eV electrostatic potential difference between ZnS and Co₉S₈, which results in a strong electrostatic field across the interface that makes electrons transfer from Co₉S₈ to the ZnS side. As expected, a stable cycling performance with reversible capacity of 411.2 mAh g^?1 at 1000 mA g^?1 after 300 cycles, excellent rate capability (324 mAh g^?1 at 2000 A g^?1) and a high percentage of pseudocapacitance contribution (87.5% at 2.2 mv/s) for lithium‐ion batteries (LIBs) are achieved. This work provides a possible strategy for designing multicomponent heterostructural materials for application in energy storage and conversion fields.     

A Microwave Synthesis of Mesoporous NiCo2O4 Nanosheets as Electrode Materials for Lithium‐Ion Batteries and Supercapacitors

A facile microwave method was employed to synthesize NiCo₂O₄ nanosheets as electrode materials for lithium‐ion batteries and supercapacitors. The structure and morphology of the materials were characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller methods. Owing to the porous nanosheet structure, the NiCo₂O₄ electrodes exhibited a high reversible capacity of 891 mA h g^?1 at a current density of 100 mA g^?1, good rate capability and stable cycling performance. When used as electrode materials for supercapacitors, NiCo₂O₄ nanosheets demonstrated a specific capacitance of 400 F g^?1 at a current density of 20 A g^?1 and superior cycling stability over 5000 cycles. The excellent electrochemical performance could be ascribed to the thin porous structure of the nanosheets, which provides a high specific surface area to increase the electrode–electrolyte contact area and facilitate rapid ion transport.