Early short time transient response of finite L-shaped Mindlin plate

The early short time transient response of an L-shaped plate is investigated by the method of reverberation ray matrix (MRRM) and the generalized ray method (GRM). The MRRM and GRM have been successfully used to study the transient elastic wave transmitting in the beams, planar trusses, space frames and infinite layered media. In the present paper, these two methods are extended to investigate the flexural wave propagation in a finite L-shaped Mindlin plate. The reverberation-ray matrix representing the multi-reflected and scattered waves in the L-shaped plate is presented. The rays in the GRM propagating in the L-shaped plate are determined by the shock source and the boundary conditions. From the numerical results, it indicates that the early short time transient responses of L-shaped plate calculated by the MRRM are the same as those by the GRM. The early short time transient acceleration responses are very large, while the early short time transient displacement responses are very small for the L-shaped plate subjected to the unit impulse. Furthermore, the effects of the different shock signals and the plate thickness on the early short time transient responses of the finite L-shaped Mindlin plates are also analyzed.     

On a method for determining the fixing conditions for a rectangular plate from the natural frequencies

We prove the duality of solutions for the problem of determining the boundary conditions on two opposite sides of a rectangular plate from the frequency spectrum of its bending vibrations. A method for determining the boundary conditions on two opposite sides of a rectangular plate from nine natural frequencies is obtained. The results of numerical experiments justifying the theoretical conclusions of the paper are presented. Rectangular plates are widely used in various technical fields. They serve as printed circuit boards and header plates, bridging plates, aircraft and ship skin, and parts of various mechanical structures [1–4]. If the plate fixing cannot be inspected visually, then one can use the natural bending vibration frequencies to find faults in the plate fixing. For circular and annular plates, methods for testing the plate fixing were found in [5–7], where it was shown that the type of fixing of a circular or annular plate can be determined uniquely from the natural bending vibration frequencies. The following question arises: Is it possible to determine the type of fixing of a rectangular plate on two opposite sides of the plate from the natural bending vibration frequencies if the other two sides are simply supported? Since the opposite sides of the plate are equivalent to each other, a plate with “rigid restraint—free edge” fixing will sound exactly the same as a plate with “free edge—rigid restraint” fixing. Hence we cannot say that the type of fixing of a rectangular plate on two opposite sides can be uniquely determined from its natural bending vibration frequencies. But it turns out that we can speak of duality in the solution of this problem. Here we observe an analogy with the problem of determining the rigidity coefficients of springs for elastic fixing of a string [8]: the rigidity coefficients of the springs are determined by the natural frequencies uniquely up to permutations of the springs.     

基于三角小波的弹性薄板高精度分析方法

采用同时具有三角函数良好逼近特性和小波多分辨率与局部特性的Hermite插值型三角小波,基于二维张量积三角小波,推导了求解各种不同边界条件下的矩形弹性薄板的弯曲、振动和屈曲问题的统一列式,同时给出了两种提高计算精度的方法一升阶法和多分辨率法。数值算例表明,三角小波法求解弹性薄板的弯曲、振动和屈曲问题时,能方便地处理各类边界条件,计算效果良好;自振特性分析更具优势,升阶法和多分辨率法能有效地提高分析精度。     

Influence of partial constrained layer damping on the bending wave propagation in an impacted viscoelastic sandwich

This paper presents a parametric model to study the transient bending wave propagation in a viscoelastic sandwich plate due to impact loading. The effect of partial constrained layer damping (PCLD) geometry on wave propagation is investigated by comparing with propagation in single layer elastic plate. Several boundary conditions are also considered, and their effect on wave propagation is highlighted.The equation of motion is obtained from Lagrange’s equations. For the single layer plate, the governing equation is solved in time domain using Newman and Wilson method. For the plate with PCLD, the frequency dependant viscoelastic behavior of the core is represented by Prony series; the equation of motion is converted into frequency domain using Fourier transform the displacement is obtained in the frequency domain and is converted into time domain with the Inverse Fast Fourier Transform.The model was validated in our previous paper (Khalfi and Ross (2013)) with experimental results, additional validation is carried in this paper with literature, and good agreement is recorded. The results show that the plate covered with PCLD remains a dispersive medium. The shape of the wave is mainly related to the sandwich stiffness while the viscoelastic layer contributes in reducing the amplitude and speed of propagation. The particularity of this transient model lies in its ability to follow the shape of the bending wave at all times to observe formation, propagation and disappearance. With this model, the influence of any structural input parameters on the bending wave can be studied. The findings presented will also serve as a research base for more advanced horizons.     

点支撑预应力中厚矩形板的弯曲

基于Reissner-Mindlin一阶剪切变形板理论，讨论在预加面内机械荷载或温度场作用下，点支撑中厚矩形板的弯曲问题。温度场假定沿板表面为均布，沿板厚方向为线性分布的。利用考虑剪切变形影响的Timoshenko梁函数，采用Rayleigh-Ritz法给出不同边界条件下点支撑中厚板在横向荷载作用下的挠度和弯矩分布。结果表明，均匀温度场与预加面内压力将使板的挠度和弯矩增加。支撑点位置的变化、边界约束条件和横向剪切变形效应都对板的内力大小和分布有显著影响。     

基于无网格法的非均匀弹性地基上变厚度加筋板弯曲与固有频率分析

采用基于移动最小二乘近似的无网格方法并结合一阶剪切变形理论,分析了非均匀弹性地基上变厚度加筋板的弯曲和固有频率问题.首先,用节点对变厚度板和筋条分别进行离散,导出变厚度板和筋条的势能;其次,利用筋条与变厚度板之间的位移协调条件将筋条的节点参数转换为板的节点参数,再将两者的势能进行叠加得到变厚度加筋板的总势能,并根据能量...     

Bending of rectangular plates carried by vacuum cups

In order to carry thin plates, vacuum cups are frequently used. When the over-hang is large, the deflections and stresses of the plate have considerably large values. In this paper, the rectangular plate hung by circular vacuum cups is treated. The analysis is carried out for the plate, which is subjected to line loads and radial bending moments at the inner circular boundary and free at the outer rectangular boundary. In addition to these boundary conditions, the plate is subjected to different distributed loads on inner and outer domains. First, the general solutions for the deflections on each domain are obtained by using infinite series, which are expressed by the polar coordinate system. The several undetermined constants in these equations are decreased by the conditions of continuity at the inner boundaries. Satisfying the boundary conditions at the finite points on the outer edges of the plate, the deflections and stresses of the plate and the contact pressures between the plate and the vacuum cup are calculated. Typical results are presented in dimensionless graphical form for different parameters and vacuum cup edge conditions.     

Analyses of dynamic characteristics of a fluid-filled thin rectangular porous plate with various boundary conditions

Based on the classical theory of thin plate and Biot theory, a precise model of the transverse vibrations of a thin rectangular porous plate is proposed. The first order differential equations of the porous plate are derived in the frequency domain. By considering the coupling effect between the solid phase and the fluid phase and without any hypothesis for the fluid displacement, the model presented here is rigorous and close to the real materials. Owing to the use of extended homogeneous capacity precision integration method and precise element method, the model can be applied in higher frequency range than pure numerical methods. This model also easily adapts to various boundary conditions. Numerical results are given for two different porous plates under different excitations and boundary conditions.     

Vibration of two-dimensional hexagonal boron nitride

The dynamic behavior of two-dimensional nanostructures is important to the future application of nano devices. The vibrational behaviors of single-layered hexagonal boron nitride(h-BN) are studied by molecular dynamics simulation and continuum plate model. The bending stiffness and Poisson's ratios of h-BN along zigzag direction and armchair direction are calculated. H-BN is softer compared with graphene. The continuum plate model can predict the vibration of h-BN with four edge-clamped boundary conditions well. The electric fields in different directions have obvious influence on the vibration of h-BN. The natural frequency of h-BN changes linearly with the electric field intensity along the polarization direction. The natural frequency of h-BN decreases with the increase of electric field intensity along both positive and negative nonpolarization direction. While the natural frequency of h-BN increases with the increase of electric field intensity along both positive and negative transverse electric field.     

面内变刚度薄板弯曲问题的挠度?弯矩耦合神经网络方法

发展了一种求解面内变刚度功能梯度薄板弯曲问题的神经网络方法. 面内变刚度薄板弯曲问题的偏微分控制方程为一复杂的4阶偏微分方程, 传统的基于强形式的神经网络解法在求解该偏微分方程时可能会遇到难以收敛、边界条件难以处理的情况. 本文基于Kirchhoff薄板弯曲理论, 提出了一种直角坐标系下任意面内变刚度薄板弯曲问题的神经网络解法. 神经网络模型包含挠度网络与弯矩网络, 分别用于预测薄板的挠度与弯矩, 从而将求解4阶偏微分方程转换为求解一系列二阶偏微分方程组, 通过对挠度、弯矩试函数的构造可使得神经网络计算结果严格满足边界条件. 在误差的反向传播中, 根据本文提出的误差函数公式计算训练误差并结合Adam优化算法更新模型的内部参数. 求解了不同边界条件、形状的面内变刚度薄板弯曲问题, 并将所得计算结果与理论解、有限元解进行对比. 研究表明, 本文模型对于求解面内变刚度薄板弯曲问题具备适应性, 虽然模型中的弯矩网络收敛较挠度网络要慢, 但本文方法在试函数的构造上更为简单、适应性更强.      

The wave and vibratory power transmission in a finite L-shaped Mindlin plate with two simply supported opposite edges

In this paper,wave and vibratory power transmission in a finite L-shaped Mindlin plate with two simply supported opposite edges are investigated using the wave approach.The dynamic responses,active and reactive power flow in the finite plate are calculated by the Mindlin plate theory (MPT) and classic plate theory (CPT).To satisfy the boundary conditions and continuous conditions at the coupled junction of the finite L-shaped plate,the near-field and far-field waves are entirely contained in the wave approach.The in-plane longitudinal and shear waves are also considered.The results indicate that the vibratory power flow based on the MPT is different from that based on the CPT not only at high frequencies but also at low and medium frequencies.The influence of the plate thickness on the vibrational power flow is investigated.From the results it is seen that the shear and rotary inertia correction of the MPT can influence the active and reactive power at the junction of the L-shaped plate not only at high frequencies but also at low and medium frequencies.Furthermore,the effects of structural damping on the active and reactive power flow at the junction are also analyzed.     

弯矩作用下薄板振动的仿真分析

针对工程中广泛存在的弯矩作用下板结构的振动问题,分别建立四边固定、三边固定一边自由、两对边固定两对边自由的3种不同边界条件下板的振动模型;基于有限元法计算振动板的频率响应,计算了各节点振动速度的平方和;运用部分追加法正交试验方案分别对板厚、边界条件、板的损耗因子三因素三水平、激励点位置四水平进行了正交试验。实例结果表明,以速度平方和的大小为目标,影响薄板振动的主次因素顺序为:损耗因子、板厚、边界、激励点位置;当振动板两对边固定另两对边自由支承、板厚为0.014m、在(0.5m,0.4m)点处激励且板的损耗因子为0.0008时,此组合为薄板结构振动最小的最优组合。     

Boundary element analysis of anisotropic Kirchhoff plates

In this paper, the radial integration method is used to obtain a boundary element formulation without any domain integral for general anisotropic plate bending problems. Two integral equations are used and the unknown variables are assumed to be constant along each boundary element. The domain integral which arises from a transversely applied load is exactly transformed into a boundary integral by a radial integration technique. Uniformly and linearly distributed loads are considered. Several computational examples concerning orthotropic and general anisotropic plate bending problems are presented. The results show good agreement with analytical and finite element results available in the literature.     

加权残数配点法解正交各向异性板的积分方程

本文推导了一般各向异性板弯曲的积分方程,运用加权残数配点法求解了正交各向异性板弯曲的积发方程,本文将部分配点取在边界上,另一部分配点取在域外,只用关于找度的基本积分方程,而不用关于转角的补充积分方程,简化了方程求解和计算程序,由于正交各向异性板没有争析形式的、实用的基本解,本文提出了两种新的近似基本解;加权双三角级数;广义各向同性板解析形式的基本解和加权双三角级数的叠加,算例表明,本文提出的解法和近似基本解适用于各类边界条件的正交各向异性板,具有简单、可靠、精度高等优点。     

薄板弯曲问题的神经网络方法

为发展神经网络方法在求解薄板弯曲问题中的应用,基于Kirchhoff板理论,提出一种采用全连接层求解薄板弯曲四阶偏微分控制方程的神经网络方法。首先在求解域、边界中随机生成数据点作为神经网络输入层的参数,由前向传播系统求出预测解;其次计算预测解在域内及边界处的误差,利用反向传播系统优化神经网络系统的计算参数;最后,不断训练神经网络使误差收敛,从而得到薄板弯曲的挠度精确解。以不同边界、荷载条件的三角形、椭圆形、矩形薄板为例,利用所提方法求解其偏微分方程,与理论解或有限元解对比,讨论了影响神经网络方法收敛的因素。研究表明,本文方法对求解薄板弯曲问题的四阶偏微分控制方程具有一定的适应性,其收敛性受多种条件影响。相比有限元,该方法收敛速度较慢,在复杂的边界条件下收敛性不佳,然而其不基于变分原理,无需计算刚度矩阵,便可获得较高的计算精度。     

An analytical symplectic approach to the vibration analysis of orthotropic graphene sheets

A nonlocal continuum orthotropic plate model is proposed to study the vibration behavior of single-layer graphene sheets (SLGSs) using an analytical symplectic approach.A Hamiltonian system is established by introduc-ing a total unknown vector consisting of the displacement amplitude,rotation angle,shear force,and bending moment. The high-order governing differential equation of the vibra-tion of SLGSs is transformed into a set of ordinary differential equations in symplectic space.Exact solutions for free vibra-tion are obtianed by the method of separation of variables without any trial shape functions and can be expanded in series of symplectic eigenfunctions. Analytical frequency equations are derived for all six possible boundary con-ditions. Vibration modes are expressed in terms of the symplectic eigenfunctions.In the numerical examples,com-parison is presented to verify the accuracy of the proposed method. Comprehensive numerical examples for graphene sheets with Levy-type boundary conditions are given.A para-metric study of the natural frequency is also included.     

Plate Bending Problem for a Finite Doubly Connected Domain with a Partially Unknown Boundary

The problem of bending of an isotropic elastic plate is solved for a finite doubly connected domain whose external boundary is a convex polygon and internal boundary is a smooth closed contour. The bending problem is reduced to the analytical solution of the Riemann—Hilbert problem for a ring. The deflection of the median surface and the shape of the plate's internal boundary are found     

非均匀Winkler弹性地基上变厚度矩形板自由振动的DTM求解

针对非均匀Winkler弹性地基上变厚度矩形板的自由振动问题,通过一种有效的数值求解方法——微分变换法（DTM）,研究其无量纲固有频率特性。已知变厚度矩形板对边为简支边界条件,其他两边的边界条件为简支、固定或自由任意组合。采用DTM将非均匀Winkler弹性地基上变厚度矩形板无量纲化的自由振动控制微分方程及其边界条件变换为等价的代数方程,得到含有无量纲固有频率的特征方程。数值结果退化为均匀Winker弹性地基上矩形板以及变厚度矩形板的情形,并与已有文献采用的不同求解方法进行比较,结果表明,DTM具有非常高的精度和很强的适用性。最后,在不同边界条件下分析地基变化参数、厚度变化参数和长宽比对矩形板无量纲固有频率的影响,并给出了非均匀Winkler弹性地基上对边简支对边固定变厚度矩形板的前六阶振型。     

Polygon-wise constant curvature natural element approximation of Kirchhoff plate model

A polygon-wise constant curvature natural element approximation is presented in this paper for the numerical implementation of the abstract Kirchhoff plate model. The strict C¹-continuity requirement in the displacement field is relaxed by converting the area integral of the curvatures into the boundary integral along the Voronoi boundary. Curvatures and bending moments are assumed to be constant within each Voronoi polygon, and the Voronoi-polygon-wise constant curvatures are derived in a selective manner for the sake of the imposition of essential boundary conditions. The numerical results illustrating the proposed method are also given.     

带圆开孔的弹性约束适度椭圆板的自由振动分析

采用弹性理论并结合边界摄动技术,对带中心圆孔的适度椭圆薄板的自由振动基频进行了分析．当薄板的内边界受弹性约束,外边界为自由,导出了自由振动基频的解析解．同时,利用ANSYS软件进行了数值模拟,通过经典边界条件下基频结果的对比,验证了基于本文理论解的计算结果的精确性．本方法可以有效用于处理具有曲线边界的薄板结构的自由振动问题．