Electro-optic effects of colloidal crystals of polymer-modified silica spheres immobilized with gelator

Electro-optic responses of colloidal crystals consist of poly(maleic anhydride-co-styrene)-modified silica spheres (P(MA-ST)/SiO₂) in acetonitrile and the crystals immobilized with a gelator, N-benzyloxycarbonyl-L-isoleucilaminooctadecane (Z-L-Ile-C-18), are studied by reflected-light intensity measurements and time-resolved reflection spectroscopy. Application of an alternating electric field deforms P(MA-ST)/SiO₂ crystal lattices reversibly. The response waveforms from the crystals are dependent on the frequency and strength of the applied electric field; similar dependencies have been qualitatively observed for the colloidal crystals consisting of polystyrene or silica spheres in aqueous media in our previous studies. Both gelated and ungelated P(MA-ST)/SiO₂ crystals change the reflection intensity, however, the amplitude is larger for the latter. The small response for the gelated P(MA-ST)/SiO₂ crystals is attributed to the higher elastic modulus (G). The G value of the gelated P(MA-ST)/SiO₂ crystals in acetonitrile is estimated from the change in the inter-sphere distance to be 8.0 Pa, which is about 2.3 and 2.4 times larger than that for ungelated P(MA-ST)/SiO₂ crystals in acetonitrile and colloidal silica crystals in aqueous media, respectively.     

Kinetics analysis of colloidal crystallization of silica spheres modified with polymers on their surfaces in acetonitrile

 The nucleation and growth rates in the colloidal crystallization of silica spheres (136 nm in diameter) modified with polymers on their surface were measured by time-resolved reflection spectroscopy. The polymers were poly(maleic anhydride-co-styrene) [P(MA-ST)] and poly(methyl methacrylate) (PMMA). The induction period for nucleation decreased sharply when the sphere concentration increased. The crystal growth process consisted of a fast growing step leading to metastable crystals (rate v ₁) and a slow growth rate accompanied by the formation of stable crystals. The crystal size of the P(MA-ST)/SiO₂ particles decreased from 0.4 to 0.06 mm, whereas v ₁ increased from 13 to 37 μm/s, when the particle concentration increased. The slow step was also observed for almost all the samples but was not analyzed since the rate was too small. For PMMA/SiO₂ dispersions, the crystal size (0.17–0.3 mm) and v ₁ (43–166 μm/s) did not show any relation to the particle concentration but showed a linear relationship with the molecular weight of PMMA. These results suggest the important role of the excluded-volume effects of the polymer layers around the silica surface. The contribution of the repulsion due to the electrical double layers is still effective in the colloidal crystallization in acetonitrile. Received: 6 June 2001 Accepted: 20 September 2001     

Rigidity of colloidal crystals of silica spheres modified with polymers on their surfaces in organic solvents

Rigidity (G) of colloidal crystals in organic solvents of acetonitrile and nitrobenzene has been measured by reflection spectroscopy in sedimentation equilibrium. The colloidal spheres used are the silica spheres (136 nm in diameter) modified on their surfaces with polymers, poly(maleic anhydride-co-styrene) [P(MA-ST)], poly(methyl methacrylate) (PMMA), or polystyrene (PST). Log G increases linearly with the slope of unity as log N (number density of colloidal spheres) increases. The mean values of the b-factor, which is the fluctuation parameter in crystal lattices and should be smaller than 0.1 according to the Lindeman's rule, are 0.045±0.003, 0.039±0.007, and 0.038±0.003 for P(MA-ST)/SiO₂, PMMA/SiO₂, and PST/SiO₂, respectively. These values are larger than that of colloidal crystals of mother silica spheres in the deionized aqueous suspension, 0.028. These results support the important role of the excluded volume effects from the polymer layers formed around the silica surfaces. However, contribution of the excluded volume effects from the electrical double layers formed around the spheres in the organic solvents is also effective in the colloidal crystallization. Electronic Publication     

Thermosensitive and control release behavior of poly(N-isopropylacrylamide-co-acrylic acid)/nano-Fe3O4 magnetic composite latex particle that is synthesized by a novel method

In this study, a novel method was used to synthesize the poly(N-isopropylacrylamide-co-acrylic acid)/Fe₃O₄ (poly(NIPAAm-AA)/Fe₃O₄) magnetic composite latex. The crosslinked poly(NIPAAm-AA) polymer latex particles were first synthesized by the method of soapless emulsion polymerization, then Fe²⁺ and Fe³⁺ ions were introduced to bond with the -COOH groups of AA segments in poly(NIPAAm-AA) polymer latex particles. Further by a reaction with NH₄OH, Fe₃O₄ nanoparticles were generated in situ. The concentrations of acrylic acid (AA), crosslinking agent (N,N′-methylene bisacrylamide (MBA)), and Fe₃O₄ nanoparticles were important factors to influence the morphology and lower critical solution temperature (LCST) of poly(NIPAAm-AA)/Fe₃O₄ magnetic composite latex particles. The poly(NIPAAm-AA)/Fe₃O₄ latex particles were used as a thermosensitive drug carrier to load caffeine. The control release of caffeine was studies. Morphology-based schematic models were proposed to explain the control release behavior of the composite particles with different compositions. Moreover, the protein (albumin, acetylated from bovine serum (BSA)) was bound on the surface of poly(NIPAAm-AA)/Fe₃O₄ composite latex particles. The effects of AA, crosslinking agent and Fe₃O₄ contents on the amount of BSA binding were investigated at different temperatures and pH values. The composition-morphology-BSA conjugation relationship was established.     

Enzyme biosensor based on the immobilization of HRP on SiO<Subscript>2</Subscript>/BSA/Au composite nanoparticles

In this work, an enzyme biosensor based on the immobilization of horseradish peroxidase (HRP) on SiO₂/BSA/Au/thionine/nafion-modified gold electrode was fabricated successfully. Firstly, nafion was dropped on the surface of the gold electrode to form a nafion film followed by chemisorption of thionine (Thi) as an electron mediator via the ion-exchange interaction between the Thi and nafion. Subsequently, the SiO₂/BSA/Au composite nanoparticles were assembled onto Thi film through the covalent bounding with the amino groups of Thi. Finally, HRP was immobilized on the SiO₂/BSA/Au composite nanoparticles due to the covalent conjugation to construct an enzyme biosensor. The surface topographies of the SiO₂/BSA/Au composite nanoparticles were investigated by using scanning electronic microscopy. The stepwise self-assemble procedure of the biosensor was further characterized by means of cyclic voltammetry and chronoamperometry. The enzyme biosensor showed high sensitivity, good stability and selectivity, a wide linear response to hydrogen peroxide (H₂O₂) in the range of 8.0 × 10^-6 ∼ 3.72 × 10^-3 mol/L, with a detection limit of 2.0 × 10^-6 mol/L. The Michaelies-Menten constant K_M^app K_M^{app} value was estimated to be 2.3 mM.     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

Synthesis of tri-layer hybrid microspheres with magnetic core and functional polymer shell

Tri-layer magnetite/silica/poly(divinylbenzene) (Fe₃O₄/SiO₂/PDVB) core-shell hybrid microspheres were prepared by distillation precipitation polymerization of divinylbenzene (DVB) in the presence of magnetite/3-(methacryloxyl)propyl trimethoxysilane (MPS) modified silica core-shell particles as seeds. The polymerization of DVB was performed in neat acetonitrile with 2,2′-azobisisobutyronitrile (AIBN) as initiator to coat magnetite/MPS-modified silica particles through the capture of DVB oligomers with the aid of vinyl groups on the surface of inorganic seeds in absence of any stabilizer or surfactant. Other magnetite/silica/polymer tri-layer hybrid particles, such as magnetite/silica/poly(ethyleneglycol dimethacrylate) (Fe₃O₄/SiO₂/PEGDMA) and magnetite/silica/poly(ethyleneglycol dimethacrylate-co-methacrylic acid) (Fe₃O₄/SiO₂/P(EGDMA-co-MAA)) with various polarity and functionality, were also prepared by this procedure. Magnetite/silica/poly(N,N′-methylenebisacrylamide-co-methacrylic acid) (Fe₃O₄/SiO₂/P(MBAAm-co-MAA)) were synthesized with unmodified magnetite/silica particles as seeds. The resultant tri-layer hybrid particles were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), dynamic light scattering, and vibrating sample magnetometer (VSM).     

Synthesis and characteristics of poly(N‐isopropylacrylamide‐co‐methacrylic acid)/Fe3O4/poly(N‐isopropylacrylamide‐co‐methacrylic acid) two‐shell thermosensitive magnetic composite hollow latex particles

In this study, the poly(N‐isopropylacrylamide‐methylacrylate acid)/Fe₃O₄/poly(N‐isopropylacrylamide‐methylacrylate acid) (poly(NIPAAm‐MAA)/Fe₃O₄/poly(NIPAAm‐MAA)) two‐shell magnetic composite hollow latex particles were synthesized by four steps. The poly(methyl methacrylate‐co‐methylacrylate acid) (poly(MMA‐MAA)) copolymer latex particles were synthesized first. Then, the second step was to polymerize NIPAAm, MAA, and crosslinking agent in the presence of poly(MMA‐MAA) latex particles to form the linear poly(MMA‐MAA)/crosslinking poly(NIPAAm‐MAA) core–shell latex particles. Then, the core–shell latex particles were heated in the presence of NH₄OH to dissolve the linear poly(MMA‐MAA) core to form the poly(NIPAAm‐MAA) hollow latex particles. In the third step, the Fe₃O₄ nanoparticles were generated in the presence of poly(NIPAAm‐MAA) hollow polymer latex particles and formed the poly(NIPAAm‐MAA)/Fe₃O₄ magnetic composite hollow latex particles. The fourth step was to synthesize poly(NIPAAm‐MAA) in the presence of poly(NIPAAm‐MAA)/Fe₃O₄ latex particles to form the poly(NIPAAm‐MAA)/Fe₃O₄/poly(NIPAAm‐MAA) two‐shell magnetic composite hollow latex particles. The effect of various variables such as reactant concentration, monomer ratio, and pH value on the morphology and volume‐phase transition temperature of two‐shell magnetic composite hollow latex particles was studied. Moreover, the latex particles were used as carriers to load with caffeine, and the caffeine‐loading characteristics and caffeine release rate of latex particles were also studied. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2880–2891     

Surface modification of fine colloidal silica with copolymer silane-coupling agents composed of maleic anhydride

The reactivity of copolymer silane composed of maleic anhydride in the modification of fine colloidal silica was studied. The reaction of colloidal silica of 10 and 45-nm diameter with trimethoxysilyl-terminated poly(maleic anhydride-co-styrene) [P(MA-ST)] and poly(MA-co-methyl methacrylate) in tetrahydrofuran resulted in effective surface modification without particle aggregation. From the results that the reaction using the polystyrene silane of low molecular weight led to partial aggregation, it was suggested that the steric interaction between relatively rigid copolymer chains having a maleic anhydride moiety adsorbed on the silica prevented the aggregation in the reaction. The ²⁹Si cross-polarization magic-angle-spinning NMR spectra of P(MA-ST)-modified silica showed that the polymer silane was bound to the silica surface by the direct reaction with silica hydroxyl groups and via the polymerization. Received: 27 June 2001 Accepted: 6 September 2001     

Influence of the swelling state of seed polymer particles with monomer on the morphology of micron-sized monodispersed composite polymer particles produced by seeded polymerization utilizing the dynamic swelling method

 Micron-sized mono-dispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/PBMA=2/1 by weight) having a heterogeneous structure in which many fine PBMA domains dispersed in a PS matrix near the particle surface were produced by seeded polymerization of n-butyl methacrylate (BMA) of which almost all had been absorbed by 1.8 μm-sized monodispersed PS seed particles utilizing the dynamic swelling method. The morphology was varied by changing the PS/BMA ratio and polymerization temperature. It was concluded that the swelling state of 2 μm-sized BMA-swollen PS particles in the seeded polymerization process is one of the important factors to control the morphology of the composite particles. Received: 27 November 1996 Accepted: 21 March 1997     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Synthesis,characterization and visible-light photocatalytic activity of TiO2–SiO2 composite modified with zinc porphyrins

Three types of silica gel supported titanium dioxide particles immobilizing Zn(II) carboxylphenyl porphyrins appending p-CH₃, p-H and p-Cl phenyl substituents (designated as ZnMP–TiO₂–SiO₂, ZnPP–TiO₂–SiO₂ and ZnCP–TiO₂–SiO₂, respectively) have been synthesized and characterized using SEM, XRD, IR, AFS, DRS, UV–Vis, XPS and TG. The photodegradation of α-terpinene in aqueous suspension was used to determine the photocatalytic activity of TiO₂–SiO₂ samples which had been impregnated with Zn(II) porphyrins, as sensitizers. The experimental results confirmed that the photocatalytic activitys of these composites are much higher than those of the nonmodified TiO₂–SiO₂ under visible light irradiation and follow the order of ZnMP–TiO₂–SiO₂ > ZnPP–TiO₂–SiO₂ > ZnCP–TiO₂–SiO₂.     

Reverse Atom Transfer Radical Polymerization of MMA in the Presence of CaCO3/SiO2 Two-Component Composite Particles

Summary: We previously discovered that structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, can be achieved via reverse atom transfer radical polymerization (ATRP), using 2,2′-azo-bis-isobutyronitrile as initiator and Cu^II bromide as catalyst. In the present study, the influence of the mass ratio of CaCO₃/SiO₂ two-component composite particles to methyl methacrylate (MMA) on the rate and behavior of the polymerization was studied in detail. The results illustrate that increasing the mass ratio of CaCO₃/SiO₂ two-component composite particles will decrease the overall rate of polymerization of MMA under standard reverse ATRP conditions. Thermal properties of the obtained well-defined particles were characterized and determined by thermogravimetric analysis (TGA). The results indicate that well-defined PMMA chains grafted on the surface of CaCO₃/SiO₂ particles were only degraded by random chain scission of C C linkages within the PMMA chain, which is different from the degradation of PMMA chains prepared via traditional radical polymerization. This difference is reasonably ascribed to the difference between the end groups of PMMA prepared via reverse ATRP and that via traditional radical polymerization, which has been confirmed by end group analysis measured by ¹H–NMR spectroscopy.     

Preparation and optical properties of novel bioactive photonic crystals obtained from core-shell poly(styrene/α-<Emphasis Type="Italic">tert</Emphasis>-butoxy-ω-vinylbenzyl-polyglycidol) microspheres

Optical properties of polymer microspheres with polystyrene cores and polyglycidol-enriched shells poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) (P(S/PGL) particles with number average diameters D _n determined by scanning electron microscopy equal 237 and 271 nm), were studied before and after immobilization of ovalbumin. The particles were synthesized by emulsifier-free emulsion copolymerization of styrene and polyglycidol macromonomer (poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol)) initiated with potassium persulfate. Molar fraction of polyglycidol units in the interfacial layer of the microspheres determined by XPS was equal 42.6 and 34.0%, for the particles with D _n equal 137 and 271 nm, respectively. Colloidal crystals from the aforementioned particles were prepared by deposition of particle suspensions on the glass slides and subsequent evaporation of water. It was found that optical properties of colloidal crystals from the P(S/PGL) microspheres strongly depend on modification of their interfacial layer by covalent immobilization of ovalbumin. The coating of particles with ovalbumin resulted in decreasing their refractive index from 1.58 to 1.52.     

Immobilized enzymes and cells in poly(N-vinyl caprolactam)-based hydrogels

A one-step mild method for entrapping animal cells and enzymes in macroporous composite poly (N-vinyl caprolactam)-calcium alginate (PVCL-CaAlg) hydrogels is described. Some properties of immobilized enzymes, such as thermal and storage stabilities and stability in water/organic media were investigated. Composite PVCL-CaAlg gels were successfully applied to immobilize a number of proteases, namely, trypsin, α-chymotrypsin, carboxypeptidase B, and thrombin. Thermal stability of the immobilized preparations obtained by entrapment in hydrogel beads allowed us to use them at 65–80†C, while the native enzymes were completely inactivated at 50–55°C. Various applications of enzymes and cells immobilized in beads weredemonstrated. Immobilized trypsin and carboxypeptidase B were applied to prepare human insulin from recombinant proinsulin. The hydrogel beads with entrapped α-chymotrypsin were used in enantioselective hydrolysis of Shiff's base of D,L-phenylalanine ethyl ester (SBPH) in acetonitrile/water medium. Thrombin immobilized in PVCL-based hydrogel films was shown to be a promising compound for wound treatment. To prepare pure preparations of monoclonal antibodies (MAb) several hybridoma cell lines, including hybridoma cell lines producing MAb to interleukin-2, were successfully cultivated in the hydrogel beads.     

Porous multicomponent chitosan/poly(ε-caprolactone)-block poly (ethylene glycol)/SiO2 aerogel@polydopamine membrane for Congo red adsorption

A composite adsorbent, chitosan//poly (ε-caprolactone)-block poly (ethylene glycol)/SiO₂ aerogel@polydopamine (CS/PCL-b-PEG/SA@PDA) membrane was prepared for the adsorption of organic dyes. The matrix polymer materials of this novel adsorbent were eco-friendly. SiO₂ aerogel with nanoporous network construction was fixed in the multicomponent polymer fibers through simultaneous electrospinning-electrospray technology followed by modification of polydopamine (PDA). The composite adsorbent had a maximum adsorption capacity of 598.8 mg/g for Congo red (CR) and possessed good reusability performance. This adsorbent showed excellent performance for the selective adsorption of relatively large molecule CR dyes even under high concentration of small molecule methyl orange (MO) dyes or 1 M of salt solution. The adsorption mechanism indicated that the –NH₂ and –OH groups in adsorbent could generate the stronger electrostatic attraction with the –SO₃^- groups in CR. Meanwhile, the sufficient adsorption spaces of the adsorbent were constructed by the porous network structure of SiO₂ aerogel, the accumulation of PDA particles and the porous structure of the multicomponent composite membrane. The work provided a proactive study in designing an adsorbent for the selective adsorption of organic dyes.     

Immobilization of α-chymotrypsin into the poly(N,N-diallyl-N,N-didodecyl ammonium bromiae)/surfactant nanocapsules

The biocatalytic systems from nanocapsules containing α-chymotrypsin in the inner aqueous cavities have been prepared. They can act in both the organic solvent and the aqueous medium. For such encapsulation, the reversed hydrated micelles from N,N-diallyl-N,N-didodecyl ammonium bromide (DDAB) in cyclohexane (w₀ = 22), including α-chymotrypsin, have been polymerized by UV initiation. After precipitation by acetone, these nanocapsules were moved into the aqueous medium with the aid of ionic, AOT, or nonionic, Brij-97, surfactants. In this case, the unilamellar liposomes were formed. They have the inner monolayer from the poly-DDAB network, and the outer one predominantly from surfactant molecules. According to the light-scattering data, the average outer diameter of nanocapsules equals to 20 nm. The vesicular “coated” α-chymotrypsin was used for study of enzymatic activity. It has been shown using the integral form of the Michaelis-Menten equation, that by encapsulation of α-chymotrypsin the value of the Michaelis constant, K_m, increases by a factor of 1.8 by the ATEE hydrolysis. However, the value of the maximal velocity, V_max, decreases by a factor of 1.7. Encapsulated α-chymotrypsin has a high thermostability keeping its own activity up to 80°C. The polymer network blocks the conformational transitions of enzyme molecule by heating of a system.     

Preparation and characterization of multiresponsive polymer composite microspheres with core–shell structure

Fe₃O₄/SiO₂/poly (N-isopropylacrylamide-co-N,N-dimethylaminoethyl methacrylate) [P(NIPAM-co-DMA)] multiresponsive composite microspheres with core–shell structure were synthesized by template precipitation polymerization. First, the magnetite nanoparticles were coated with silica and then modified with 3-(trimethoxysilyl)-propyl methacrylate (MPS). Subsequently, the Fe₃O₄/SiO₂ particles grafted with MPS were used to seed the precipitation copolymerization of NIPAM and DMA. The composite microspheres with core–shell structure were superparamagnetic, pH-sensitive, and thermoresponsive. The swelling ratio (D_{25 °C, pH = 3}/D_{50 °C, pH = 9})³ coupling of pH and temperature increased up to 21.2, which was much higher than that without comonomer DMA.     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Electrospun microfibrous poly(styrene-alt-maleic anhydride)/poly(styrene-co-maleic anhydride) mats tailored for enzymatic remediation of waters polluted by endocrine disruptors

Novel bicomponent microfibrous mats containing targeted amount of reactive maleic anhydride groups were prepared by electrospinning of mixed solutions of poly(styrene-alt-maleic anhydride) and poly(styrene-co-maleic anhydride). Then, amino-functionalized P(St-alt-MA)/P(St-co-MA) mats were obtained by reaction with p-phenylenediamine. ATR-FTIR and XPS spectroscopy were used to characterize pristine and modified P(St-alt-MA)/P(St-co-MA) mats. On the next step, laccase from Trametes versicolor was covalently attached onto the modified mats; the average amount of immobilized enzyme was 40 ± 0.7 mg/g mat. The catalytic activity of the immobilized enzyme was studied in respect to bisphenol A (BPA) endocrine disruptor. The optimum activity of the immobilized enzyme was reached at maximum flow rate of 1.3 mL/s. After 90 min the BPA concentration was reduced by 60% and the catalytic activity of microfibrous mats remained stable for about 30 successive reuses. In addition, the relative activity of laccase immobilized on the microfibrous mats was displayed in a broader pH range as compared to that of the free one.