铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.     

Aluminum electrode modified with manganese hexacyanoferrate as a chemical sensor for hydrogen peroxide

A chemically modified electrode was fabricated based on manganese hexacyanoferrate (MnHCF) film. The MnHCF was used as a modifier immobilized onto an aluminum electrode. Stability of the electroactive film formed on the Al electrode surface indicated that MnHCF is a suitable material for the preparation of modified electrodes. The analytical applicability of the modified electrode for the determination of hydrogen peroxide was examined. A linear response in concentration range of 6.0x10(-7)-7.4x10(-3) M (r=0.9997) was obtained with detection limit of 2.0x10(-7) M for the determination of hydrogen peroxide. The modified electrode exhibited a good selectivity for H(2)O(2) in real samples. The mentioned electrode has advantages of being highly stable, sensitive, inexpensive, ease of construction and use.     

Sol-gel-derived carbon ceramic electrode containing 9,10-phenanthrenequinone, and its electrocatalytic activity toward iodate

9,10-Phenanthrenequinone (PQ) supported on graphite powder by adsorption was dispersed in propyltrimethoxysilane-derived gels to yield a conductive composite which was used as electrode material to fabricate a PQ-modified carbon ceramic electrode. In this configuration, PQ acts as a catalyst, graphite powder guarantees conductivity by percolation, the silicate provides a rigid porous backbone, and the propyl groups endow hydrophobicity and thus limit the wetting region of the modified electrode. Square-wave voltammetry was exploited to investigate the pH-dependent electrochemical behavior of the composite electrode and an almost Nernstian response was obtained from pH 0.42 to 6.84. Because the chemically modified electrode can electrocatalyze the reduction of iodate in acidic aqueous solution (pH 2.45), it was used as an amperometric sensor for the determination of iodate in table salt. The advantages of the electrode are that it can be polished in the event of surface fouling, it is simple to prepare, has excellent chemical and mechanical stability, and the reproducibility of surface-renewal is good.     

Simple and low-cost electrochemical sensor based on nickel nanoparticles for the determination of cabergoline

Cabergoline (CAB) is an ergot alkaloid derivative with dopamine agonist activity. In this work for the first time the electrocatalytic oxidation of CAB was carried out with nickel nanoparticles-modified carbon paste electrode using cyclic voltammetry, chronoamperometry, chronocoulometry and amperometry methods. At first, nickel nanoparticles were synthesized by non-aqueous polyol method and these nanoparticles were mixed with graphite powder to form modified carbon paste electrode. The resulting modified electrode was characterized by scanning electron microscope images. In the presence of 0.1 M NaOH a good redox behavior of the Ni(III)/Ni(II) couple at the surface of the electrode can be observed. CAB was successfully oxidized at the surface of the modified electrode. The electrocatalytic oxidation peak current of this drug was linearly dependent on its concentration. The proposed sensor exhibited a high sensitivity and was successfully applied for the determination of CAB in real samples.     

Graphite felt modified with electroless Co-Ni-P alloy as an electrode material for electrochemical oxidation and reduction of polysulfide species

Electroless deposition of a Co?Ni?P alloy on the surface of graphite felt filaments was performed in a low-temperature pyrophosphate solution under flow-through conditions. The loading, composition, morphology, and structure of electroless the Co?Ni?P alloy deposit on the filaments of the modified graphite felt were investigated by gravimetric analysis, energy-dispersive X-ray spectroscopy, scanning electron microscopy and X-ray diffraction, respectively. Electrochemical characterization of a graphite felt electrode modified with electroless Co?Ni?P alloy was performed by cyclic voltammetry, chrono-techniques, and the electrochemical impedance spectroscopy test in an aqueous solution of polysulfide composed of the mixture of 1 M Na₂S, 1 M NaOH and 1 M S. It was found that the electroless Co?Ni?P alloy deposit on graphite felt has good cycling stability and high electrocatalytic activity toward reversible electrochemical redox reactions of polysulfide species. In comparison with the bare graphite felt electrode, the electrode modified with the electroless Co?Ni?P alloy showed five to seven times lower values of anodic and cathodic overpotentials in the aqueous solution of polysulfide. It is very likely that the good electrochemical performance of the modified graphite felt electrode is related to the high surface area of the electroless Co?Ni?P alloy deposit.     

Electrochemical detection of DNA hybridization by using a zirconia modified renewable carbon paste electrode

A simple, polishable and renewable DNA biosensor was fabricated based on a zirconia modified carbon paste electrode. Zirconia was mixed with graphite powder and paraffin wax to produce the paste for the electrode, and response-optimized at 56% graphite powder, 19% ZrO(2) and 25% paraffin wax. An oligonucleotide probe with a terminal 5'-phosphate group was attached to the surface of the electrode via the strong affinity of zirconia for phosphate groups. DNA immobilization and hybridization were characterized by cyclic voltammetry and differential pulse voltammetry, using methylene blue as indicator. Examination of changes in response with complementary or non-complementary DNA sequences showed that the developed biosensor had a high selectivity and sensitivity towards hybridization detection (< or =2x10(-10) M complementary DNA detectable). The surface of the biosensor can be renewed quickly and reproducibly (signal RSD+/-4.6% for five successive renewals) by a simple polishing step.     

pH柔性膜电极的制作与表征

采用木犀草素为pH值选择性试剂,石墨粉为导电基质,PVC为成膜材料,自制无毒无害的pH柔性膜电极(pH flexible electrode,pH/FE)。该电极有一个氧化峰,它的峰电位对2.00~9.00范围内的pH值有线性响应,并且具有弯曲度好、抗拉伸性强、溶胀性能稳定、准确度高,选择性好等性能。此电极有望作为柔性检测器件用于非平面介质表面液层pH值的测定。     

Abrasive immobilization of carbon nanotubes on a basal plane pyrolytic graphite electrode: application to the detection of epinephrine

The performance of a basal plane pyrolytic graphite (bppg) electrode modified with carbon nanotubes is described. Abrasive immobilization of multiwall carbon nanotubes on a bppg electrode was achieved by gently rubbing the electrode surface on a filter paper supporting carbon nanotubes. The resulting electrode showed excellent mediation of epinephrine oxidation: a decrease in the overvoltage of the epinephrine electro-oxidation (200-500 mV) was observed as well as a dramatic increase in the peak current (4 times) compared to that seen at a bare bppg electrode. The oxidation peaks of epinephrine and ascorbic acid which overlap on bare bppg electrode were separated successfully (by ca. 220 mV) at the surface of the modified bppg electrode. The modified electrode showed good stability in comparison to most modified carbon nanotubes electrodes prepared by alternative methods.     

Electroanalytical Exploitation of Nitroso Phenyl Modified Carbon‐Thiol Interactions: Application to the Low Voltage Determination of Thiols

The electrochemical generation of nitrosophenyl groups covalently attached to graphite powder (nitrosophenylcarbon) from carbon powder chemically modified with nitrophenyl groups and their subsequent reaction with thiols (glutathione, cysteine and homocysteine) has been investigated as a method by which the later can be quantified. The modified carbon powder was immobilized onto a basal plane pyrolytic graphite electrode and characterized by cyclic voltammetry by scanning between 1.0 V and ?1.0 V vs. SCE in phosphate buffer (pH 7). Square wave voltammetry (SWV) was used for the determination of thiols and the SWV parameters were optimized. The nitrosophenylcarbon is electrogenerated from nitrophenylcarbon and can chemically oxidize thiols to disulfides. Subsequent reduction of nitrosophenylcarbon to phenylhydroxylaminecarbon during the square wave voltammetric process leads to a decrease in the reductive current. This can be correlated to the concentration of thiol present within the medium. The cyclic voltammetric responses of basal plane pyrolytic graphite electrode, edge plane pyrolytic graphite electrode, glassy carbon electrode and boron‐doped diamond electrode in the direct oxidation of thiols were also investigated and all were found to have a significantly higher overpotential compared to the described method using nitrosophenylcarbon.     

聚合物—石墨复合材料电极

用石墨粉填充ＡＳ树脂，挤出成型制备了ＡＳ－复合导电材料电极，电极具有较好的导电性，机械强度和操作稳定性，在多种底液中具有比玻碳电极更高的氢电压值和小的残余电流。电极成功地用于Ｃｕ、Ｉｎ、Ｐｂ、Ａｂ的测定并显示较好的选择性，稳定性和再现性；并可采用浸涂法方便地进行甲基蓝修饰，得到具有稳定电化学性的修饰电极。     

Nanobiocomposite Modified Carbon‐Ceramic Electrode Based on Nano‐TiO2‐Plant Tissue and Its Application for Electrocatalytic Oxidation of Dopamine

A new modified carbon‐ceramic electrode was prepared by incorporating TiO₂ nanoparticle into sol‐gel network by accompanying apple tissue. A mixture of fine graphite powder with 15 wt% of TiO₂ nanoparticle was used for the preparation of the carbon matrix and finally modification with a known amount weighted of apple tissue. The apple tissue containing polyphenol oxidase enzyme acts as molecular recognition element. The electrocatalytic oxidation of dopamine was investigated on the surface of the nanobiocomposite modified carbon‐ceramic electrode using cyclic voltammetry, chronoamperometry and amperometry techniques. Effect of pH, scan rate, TiO₂ percentage on the response of modified electrode was studied. The prepared modified electrode presented a linear range for dopamine from 5.0×10^?6 to 1.2×10^?3 M in buffered solutions with pH 7.4 by amperometry. The detection limit was 3.41×10^?6 M dopamine. The response of the modified carbon‐ceramic electrode and unmodified carbon‐ceramic electrode was compared.     

Surface modification of amine-functionalised graphite for preparation of cobalt hexacyanoferrate (CoHCF)-modified electrode: an amperometric sensor for determination of butylated hydroxyanisole (BHA)

A cobalt hexacyanoferrate (CoHCF)-modified graphite paraffin wax composite electrode was prepared by a new approach. An amine-functionalised graphite powder was used for the fabrication of the electrode. A functionalised graphite paraffin wax composite electrode was prepared and the surface of the electrode was modified with a thin film of CoHCF. Various parameters that influence the electrochemical behaviour of the modified electrode were studied by varying the background electrolytes, scan rates and pH. The modified electrode showed good electrocatalytic activity towards the oxidation of butylated hydroxyanisole (BHA) under optimal conditions and showed a linear response over the range from 7.9 × 10⁻⁷ to 1.9 × 10⁻⁴ M of BHA with a correlation coefficient of 0.9988. The limit of detection was 1.9 × 10⁻⁷ M. Electrocatalytic oxidation of BHA was effective at the modified electrode at a significantly reduced potential and at a broader pH range. The utility of the modified electrode as an amperometric sensor for the determination of BHA in flow systems was evaluated by carrying out hydrodynamic and chronoamperometric experiments. The modified electrode showed very good stability and a longer shelf life. The modified electrode was applied for the determination of BHA in spiked samples of chewing gum and edible sunflower oil. The advantage of this method is the ease of electrode fabrication, good stability, longer shelf life, low cost and its diverse application for BHA determination. Figure Cyclic Voltammogram of () CoHCF modified electrode, () in presence of 1.9 x 10⁻⁵ M of BHA and () bare electrode, () in the presence of 1.9 x 10⁻⁵ M of BHA in 1.0 M NaCl, pH 7.0     

Ferrocene-mediated carbon paste electrode modified with d-fructose dehydrogenase for batch mode measurement of d-fructose

A mediated modified carbon paste and renewable surface electrode for fructose amperometric measurement based on d-fructose dehydrogenase (FDH) was prepared and optimized. Commercially available ferrocene (FcH) and hydroxymethyl ferrocene (FcCH₂OH) were used as mediators. The substituted FcH showed better linearity and higher sensitivity. The influence of different experimental parameters was studied for optimum analytical performance. The final FDH-modified electrode showed good analytical performance for batch mode measurements of fructose.     

Surface Engineering Stabilizes Rhombohedral Sodium Manganese Hexacyanoferrates for High-Energy Na-Ion Batteries

The rhombohedral sodium manganese hexacyanoferrate (MnHCF) only containing cheap Fe and Mn metals was regarded as a scalable, low-cost, and high-energy cathode material for Na-ion batteries. However, the unexpected Jahn-teller effect and significant phase transformation would cause Mn dissolution and anisotropic volume change, thus leading to capacity loss and structural instability. Here we report a simple room-temperature route to construct a magical Co_xB skin on the surface of MnHCF. Benefited from the complete coverage and the buffer effect of Co_xB layer, the modified MnHCF cathode exhibits suppressed Mn dissolution and reduced intergranular cracks inside particles, thereby demonstrating thousands-cycle level cycling lifespan. By comparing two key parameters in the real energy world, i.e., cost per kilowatt-hours and cost per cycle-life, our developed Co_xB coated MnHCF cathode demonstrates more competitive application potential than the benchmarking LiFePO₄ for Li-ion batteries.     

Ionic Liquid‐Hemoglobin‐Carbon Paste Composite Bioelectrode and Its Electrocatalytic Activity

A new carbon ionic liquid paste bioelectrode was fabricated by mixing hemoglobin (Hb) with graphite powder, ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIMBF₄) and liquid paraffin homogeneously. Nafion film was cast on the electrode surface to improve the stability of bioelectrode. Direct electrochemistry of Hb in the bioelectrode was carefully investigated. Cyclic voltammetric results indicated that a pair of well‐defined and quasi‐reversible electrochemical responses appeared in pH 7.0 phosphate buffer solution (PBS), indicating that direct electron transfer of Hb was realized in the modified electrode. The formal potential (E^0′) was calculated as ?0.316 V (vs. SCE), which was the typical characteristic of the electrochemical reaction of heme Fe(III)/Fe(II) redox couple. Based on the cyclic voltammetric results the electrochemical parameters of the electrode reaction were calculated. This bioelectrode showed high electrocatalytic activity towards the reduction of trichloroacetic acid (TCA) with good stability and reproducibility.     

Amperometric sensor for the determination of ascorbic acid based on Cobalt hexacyanoferrate modified electrode fabricated through a new route

A new approach was attempted to prepare a chemically modified electrode using Cobalt hexacyanoferrate (CoHCF) as the redox mediator and to study its stability and electrocatalytic activity for ascorbic acid (AA) oxidation. The basic principle underlying the electrode modification is the coordination of cobalt ion with the amino nitrogen of aniline adsorbed on the surface of a graphite rod. This surface was subsequently derivatized with ferrocyanide to get CoHCF film on the electrode surface. The CoHCF modified electrode as prepared above was characterized using cyclic voltammetry. The effect of scan rate, supporting electrolyte and pH of the medium on the performance of the modified electrode was investigated. The CoHCF modified electrode exhibited good electrocatalytic activity towards the oxidation of ascorbic acid and gave a linear response from 5.52 x 10(-5) M to 3.23 x 10(-2) M with a correlation coefficient of 0.9929. The detection limit was found to be 3.33 x 10(-5) M. Hydrodynamic voltammetry and chronoamperometry studies for the oxidation of ascorbic acid were also carried out. The electrode was highly stable and exhibited good reproducibility. This modified electrode was also applied for the determination of ascorbic acid in commercial samples.     

PB/Au/CILE的制备与应用

混合离子液体(N-丁基吡啶六氟磷酸盐,[BuPy][PF6])与石墨粉,制备了离子液体碳糊电极(CILE),再采用电沉积法制得PB/Au/CILE修饰电极,研究了该修饰电极的电化学行为及其对H2O2的电催化,建立了H2O2的计时安培测定新方法。结果表明:在该修饰电极上PB产生了一对准可逆的氧化还原峰,并对H2O2表现出良好电催化作用,安培法测定H2O2的线性范围为5.0×10-6～1.55×10-4mol/L,检出限为1.0×10-6mol/L(S/N=3)。连续10次测定5.0×10-6mol/L H2O2峰电流的RSD为2.1%。     

Graphene Functionalized Graphite Electrode with Diphenylacetylene for Sensitive Electrochemical Determination of Adenosine‐5′‐triphosphate

In this paper a molecular wire modified carbon paste electrode (MW‐CPE) was firstly prepared by mixing graphite powder with diphenylacetylene (DPA). Then a graphene (GR) and chitosan (CTS) composite film was further modified on the surface of MW‐CPE to receive the graphene functionalized electrode (CTS‐GR/MW‐CPE), which was used for the sensitive electrochemical detection of adenosine‐5′‐triphosphate (ATP). The CTS‐GR/MW‐CPE exhibited excellent electrochemical performance and the electrochemical behavior of ATP on the CTS‐GR/MW‐CPE was carefully studied by cyclic voltammetry with an irreversible oxidation peak appearing at 1.369 V (vs. SCE). The electrochemical parameters such as charge transfer coefficient (α) and electrode reaction standard rate constant (k_s) were calculated with the results of 0.53 and 5.28×10^?6 s^?1, respectively. By using differential pulse voltammetry (DPV) as detection technique, the oxidation peak current showed good linear relationship with ATP concentration in the range from 1.0 nM to 700.0 µM with a detection limit of 0.342 nM (3σ). The common coexisting substances, such as uric acid, ascorbic acid and guanosine‐5′‐triphosphate (GTP), showed no interferences and the modified electrode was successfully applied to injection sample detection.     

Sol—Gel Derived Carbon Ceramic Electrode Bulk—Modified with Tris（1,10—phenanthroline—5,6—dione） iron （Ⅱ）Hexafluorophosphate and Its Use as an Amperometric Iodate Sensor

A surface‐renewable tris(1, 10‐phenanthroline‐5, 6‐dione) iron (D) hexafluorophosphate (FePD) modified carbon ceramic electrode was constructed by dispersing FePD and graphite powder in methyltrimethoxysilane (MTMOS) based gels. The FePD‐modified electrode presented pH‐dependent voltammetric behavior, and its peak currents were diffusion‐controlled in 0.1 mol/L Na₂SO₄ + H₂SO₄ solution (pH = 0.4). In the presence of iodate, dear electrocatalytic reduction waves were observed and thus the chemically modified electrode was used as an amperometric sensor for iodate in common salt. The linear range, sensitivity, detection limit and response time of the iodate sensor were 5 × 10^?6–1 × 10^?2 mol/L, 7.448 μA·L/ mmol, 1.2 × 10^?6 mol/L and 5 s, respectively. A distinct advantage of this sensor is its good reproducibility of surface‐renewal by simple mechanical polishing.     

Sol-gel derived carbon ceramic electrode containing methylene blue-intercalated α-zirconium phosphate micro particles

Methylene blue-intercalated alpha-zirconium phosphate (MBZrP) micro particles in deionized water were deposited onto the surface of graphite powder to prepare graphite powder-supported MBZrP, which was subsequently dispersed into methyltrimethoxysilane-derived gels to yield a conductive composite. The composite was used as electrode material to fabricate a surface-renewable, rigid, leak-free carbon ceramic composite electrode, bulk-modified with methylene blue (MB). In the configuration, alpha-zirconium phosphate was employed as a solid host for MB, which acted as a catalyst. Graphite powder ensured conductivity by percolation, the silicate provided a rigid porous backbone and the methyl groups endowed hydrophobicity and thus limited the wetting section of the modified electrode. Peak currents of the MBZrP-modified electrode were surface-confined at low scan rates but diffusion-controlled at high scan rates. Square-wave voltammetric study revealed that MBZrP immobilized in carbon ceramic matrix presented a two-electron, three-proton redox process in acidic aqueous solution with pH ranged from 0.44 to 2.94. In addition, the chemically modified electrode showed an electrocatalytic activity toward nitrite reduction at +0.15 V ( vs. Ag/AgCl) in acidic aqueous solution (pH=0.44). The linear range and detection limit are 1x10(-6)-4x10(-3) mol x L(-1) and 1.5x10(-7) mol x L(-1), respectively.