New Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Zn(II), Cd(II), and Hg(II) Gibberellate Complexes: Synthesis,Structure, and Inhibitory Activity Against COVID-19 Protease

Russian Journal of General Chemistry - Transition metals such as Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Zn(II), Cd(II), and Hg(II) have been reacted with gibberellic acid (HGA) to give novel...     

Synthesis,characterization and susceptibility of bacteria against Sulfamethoxydiazine complexes of copper(II), zinc(II), nickel(II), cadmium(II), chromium(III) and iron(III)

Complexes of sulfamethoxydiazine with Cu(II), Zn(II), Ni(II), Cd(II), Cr(III) and Fe(III) have been synthesized and characterized on the basis of conductivity measurements, elemental analyses, UV, IR, ¹H?NMR and thermal studies. It is shown that sulfamethoxydiazine behaves as a bidentate ligand, binding the metal ion through the sulfonyl oxygen and sulfonamide nitrogen. In vitro susceptibility tests of these complexes against Escherichia coli, Bacillus subtilis, Proteus vulgaris and Staphylococcus aureus were carried out. The results show that the antibacterial activities of the complexes of Zn(II), Cu(II), Cr(III) and Fe(III) are, in general, stronger than that of sulfamethoxydiazine, while the complexes of Cd(II) and Ni(II) are less active.     

Organic acid solutions in the chromatography of inorganic ions VIII. Cation-exchange of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media

Summary The cation-exchange behaviour of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the ammonium form. Separation of Fe(III)/Cu(II), Fe(III)/Cu(II)/Zn(II), Fe(III)/Co(II)/Mn(II), Cu(II)/Ni(II)/Mn(II), Fe(III)/Cu(II)/Co(II)/Mn(II), Fe(III)/Cu(II)/Ni(II)/Cd(II), Yb(III)/Eu(III), Sc(III)/Y(III),Sc(III)/Yb(III)/Dy(III) and Nb(V)/Yb(III)/Ho(III) has been achieved, among others.This work was supported by C.N.R. of Italy.     

Spectroscopic approach in characterization of chromium(III), manganese(II), iron(III) and copper(II) complexes with a nitrogen donor tetradentate, 14-membered azamacrocyclic ligand

The complexes of Cr(III), Mn(II), Fe(III) and Cu(II) were synthesized with the macrocyclic ligand i.e. 2,3,9,10-tetraketo-1,4,8,11-tetraazacyclotetradecane. The ligand was prepared by the [2 + 2] condensation reaction of diethyloxalate and 1,3-diamino propane. These complexes were found to have the general composition M(L)X3 and M'(L)X2 [where M = Mn(II) and Cu(II), M' = Cr(III) and Fe(III), L = ligand (N4) and X = Cl-, NO3-, 1/2SO4(2-) and [CH3COO-]. The ligand and its transition metal complexes were characterized by the elemental analyses, molar conductance, magnetic susceptibility, mass, IR, electronic, and EPR spectral studies. On the basis of IR, electronic and EPR spectral studies an octahedral geometry has been assigned for Cr(III), Mn(II) and Fe(III) and a tetragonal geometry for Cu(II) complexes.     

The use of Agrobacterium tumefacients immobilized on Amberlite XAD-4 as a new biosorbent for the column preconcentration of iron(III), cobalt(II), manganese(II) and chromium(III)

A microorganism Agrobacterium tumefacients as an immobilized cell on a solid support was presented as a new biosorbent for the enrichment of Fe(III), Co(II), Mn(II) and Cr(III) prior to flame atomic absorption spectrometric analysis. Amberlite XAD-4 was used as a support material for column preconcentration. Various parameters such as pH, amount of adsorbent, eluent type and volume, flow rate of sample solution, volume of sample solution and matrix interference effect on the retention of the metal ions have been studied. The optimum pH for the sorption of above mentioned metal ions were about 6, 8, 8 and 6, respectively. The loading capacity of adsorbent for Co(II) and Mn(II) were found to be 29 and 22 μmol g⁻¹, respectively. The recoveries of Fe(III), Co(II), Mn(II) and Cr(III), under the optimum conditions were found to be 99 ± 3, 99 ± 2, 98 ± 3 and 98 ± 3%, respectively, at the 95% confidence level. The limit of detection was 3.6, 3.0, 2.8 and 3.6 ng ml⁻¹ for Fe(III), Co(II), Mn(II) and Cr (III), respectively, by applying a preconcentration factor of 25. The proposed enrichment method was applied for metal ion determination from water samples, alloy samples, infant foods and certified samples such as whey powder (IAEA-155) and aluminum alloy (NBS SRM 85b). The analytes were determined with a relative error lower than 10% in all samples.     

Structural characterization of complexes between iminodiacetate blocked on styrene-divinylbenzene matrix (Chelex 100 resin) and Fe(III), Cr(III), and Zn(II) in solid phase by energy-dispersive X-ray diffraction.

Local structure of Fe(III), Cr(III), and Zn(II) cations has been determined on the amorphous sample by means of the difference method used for liquid systems. We recorded energy-dispersive X-ray diffraction spectra of a chelating resin (Chelex 100), containing paired iminodiacetate ions coupled to a styrene-divinylbenzene support, in several ionic forms. Coordination geometry of Fe(III), Cr(III), and Zn(II) metal cations with Chelex 100 resin ligand sites, and conformation of the ligand groups have been determined.     

Preconcentration of Cr(III), Co(II), Cu(II), Fe(III) and Pb(II) as calmagite chelates on cellulose nitrate membrane filter prior to their flame atomic absorption spectrometric determinations

A method for the preconcentration and determination of Cr(III), Co(II), Cu(II), Fe(III) and Pb(II) ions by atomic absorption spectrometry has been described. The method was based the collection of metal-calmagite complexes on a soluble cellulose nitrate membrane filter. The detection of the solution was obtained by flame atomic absorption spectrometry (FAAS) after completely dissolving the membrane with 0.5 ml of nitric acid at 80 degrees C. The metal ions were recovered quantitatively at pH 8. Various factors which affect the collection and determination of metal ions such as, type and size of the membrane filter, solvent for dissolution of the species retained on the filter were investigated. The detection limits were varying 0.06 mug l(-1) for Cu to 2.5 mug l(-1) for Cr. An application of the proposed method for analyte ions in mineral and tap water samples was also described with satisfactory results (recoveries >95%, relative standard deviations <10%).     

Electrometric titrations of Cr(VI), Mn(IV), V(V), Co(III) and U(VI) with a standard iron(II) solution in alkaline media containing hexitols

Direct and indirect potentiometric, bipotentiometric and biamperometric titrations with a standard iron(II) solution are described for some inorganic compounds in alkaline media containing hexitols (mannitol, dulcitol and sorbitol). The optimal conditions for titrations based on the Cr(VI) → Cr(III), Mn(IV) → Mn(III) → Mn(II), V(V) → V(IV), Co(III) → Co(II) and U(VI) → U(IV) systems are discussed. Of the hexitols studied, sorbitol has the greatest effect on the value of the redox potential of the Fe(III)/Fe(II) system; the E_f° value is about —1.10 V vs. SCE.     

Effect of Cr(III), Fe(III), Co(III), and Ni(II) acetylacetonates on the formation and thermal oxidative degradation of epoxy-anhydride polymers and composites

The effect of Cr(III), Fe(III), Co(III), and Ni(II) acetylacetonates on epoxy-anhydride polycondensation in preparation of unmodified polymeric materials based on UP-650T epoxy resin and isomethyltetrahydrophthalic anhydride and of epoxy-siloxane hybrid composites was examined The resistance of the materials obtained to high-temperature oxidation and thermal oxidative degradation was evaluated.     

Extraction behavior of Tm(III), Dy(III) and Sm(III) lanthanide with N-benzoyl-N-phenylhydroxalamine

The extraction of Sm(III), Dy(III) and Tm(III) with N-benzoyl-N-phenylhydroxalamine (BPHA) in benzene at pH range (1–10) has been studied. Quantitative separation was found in borate media at pH 8. The slope analysis showed that the extracted complex was M(BPHA)₃, where M=Sm(III), Dy(III) and Tm(III). The effect of various masking agents indicated that EDTA, oxalate, fluoride, phosphate and citrate, interfered in this study. Decontamination study showed that Cu(II), Zn(II), Ni(II), Co(II), Cr(III), Sc(III) and Fe(III) had very poor separation factors, whereas Sn(II), Cd(II), In(III), Ru(II), Hg(II), Ag(I), Ta(V) and Hf(IV) had very large separation factor. The effect of different diluents showed that carbontetrachloride, chloroform, benzene, toluene, nitrobenzene dichloromethane, MIBK and cyclohexanone were equally good for extraction except TBP due to ion association.     

Polarographic analytical determination of Hg(II), Cu(II), Cd(II), As(III), Sb(III), Ti(IV) and U(VI) in the presence of Fe(III)

The analytical determination of Hg(II), Cu(II), Cd(II), As(III), Sb(III), Ti(IV) and U(VI) in the presence of Fe(III) and 1 M H₂SO₄ are investigated using the polarographic technique. The wave corresponding to the reduction of Fe(III) to Fe(II) was found to be completely suppressed by the addition of 1% pyrogallol. Thus, different mixtures of these elements, viz. Hg(II), Cu(II), Cd(II), As(III) and Fe(III)-mixture (A), Cu(II), Cd(II), Sb(III), As(III) and Fe(III)-mixture (B), and Cu(II), Cd(II), Ti(IV), U(VI) and Fe(III)-mixture (C), were quantitatively determined using 1% pyrogallol and 1 M H₂SO₄ as supporting electrolyte. The i₁/c results give excellent correlations in each case, as indicated from the results of leastsquares regression analysis.     

Cr(III), Fe(III), and Co(II) complexes of tetraazamacrocycles derived from 2,3-butanedione or benzil and 1,8-diamino-3,6-diazaoctane

Summary Template condensation of -diketones such as 2,3-butanedione or benzil with 1,8-diamino-3,6-diazaoctane in the presence of Cr(III), Fe(III) and Co(II) results in the formation of macrocyclic complexes of the type [MLX₂]X and [CoLX]X (where M=Cr(III), Fe(III), L=N₄ macrocycle and X=NO ₃ ^– or Cl^–). The complexes have been characterized by elemental analyses, conductance and magnetic measurements, molecular weight determinations, infrared and diffuse reflectance spectral studies.

---

Cr(III)-, Fe(III)- und Co(II)-Komplexe mit Tetraazamacrocyclen aus 2,3-Butandion oder Benzil und 1,8-Diamino-3,6-diazaoctan

Zusammenfassung Kondensation von -Diketonenen wie 2,3-Butandion oder Benzil mit 1,8-Diamino-3,6-diazaoctan in Gegenwart von Cr(III), Fe(III) und Co(II) resultiert in der Bildung von macrocyclischen Komplexen vom Typ [MLX₂]X und [CoLX]X mit M=Cr(III), Fe(III), L=N₄-Macrocyclus und X=NO ₃ ^– oder Cl^–. Die Komplexe wurden mittels Elementaranalyse, Leitfähigkeits-und magnetischen Messungen, Molekulargewichtsbestimmung und Infrarot- bzw. diffuser Reflexions-Spektren charakterisiert.

     

Chemistry of substituted sulphuric acids—XVII. Complexes of V(III), Cr(III), Mn(II) and Fe(II) methylsulphates

V(III), Cr(III), Mn(II) and Fe(II) methylsulphates form stable donor-acceptor complexes with nitrogen donors. 1:1 and 1:2 complexes with bipyridyl have been prepared in respect of trivalent salts and 1:2 and 1:4 metal:base complexes have been obtained in respect of divalent metal salts with bipyridyl and pyridine respectively. Electronic spectra suggest an octahedral geometry around metal ions. IR spectra of the anhydrous metal methylsulphates have been studied and assigned. The changes in the IR spectra of the methylsulphate group in different stereochemical situations have been observed.     

Organic acid solutions in the chromatography of inorganic ions-IV: cation-exchange of Mn(II), Cd(II), Co(II), Ni(II), Cu(II), Al(III) and Fe(III) in tartrate media

The cation-exchange behaviour of Mn(II), Cd(II), Co(II), Ni(II), Cu(II), Al(III) and Fe(III), in tartaric acid media was studied. Separations of Fe(III), Cu(II), Ni(II), Co(II), Cd(II) and Mn(II) on Dowex 50W X8 have been achieved.     

Preparation and characterization of Cr(III), Mn(II), Fe(II), Co(II) and Ni(II) complexes of a hexaazadithiophenolate macrocycle

The ligating properties of the 24-membered macrocyclic dinucleating hexaazadithiophenolate ligand (L(Me))2- towards the transition metal ions Cr(II), Mn(II), Fe(II), Co(II), Ni(II) and Zn(II) have been examined. It is demonstrated that this ligand forms an isostructural series of bioctahedral [(L(Me))M(II)2(OAc)]+ complexes with Mn(II) (2), Fe(II) (3), Co(II) (4), Ni(II) (5) and Zn(II) (6). The reaction of (L(Me))2- with two equivalents of CrCl2 and NaOAc followed by air-oxidation produced the complex [(L(Me))Cr(III)H2(OAc)]2+ (1), which is the first example for a mononuclear complex of (L(Me))2-. Complexes 2-6 contain a central N3M(II)(mu-SR)2(mu-OAc)M(II)N3 core with an exogenous acetate bridge. The Cr(III) ion in is bonded to three N and two S atoms of (L(Me))2- and an O atom of a monodentate acetate coligand. In 2-6 there is a consistent decrease in the deviations of the bond angles from the ideal octahedral values such that the coordination polyhedra in the dinickel complex 5 are more regular than in the dimanganese compound 2. The temperature dependent magnetic susceptibility measurements reveal the magnetic exchange interactions in the [(L(Me))M(II)2(OAc)]+ cations to be relatively weak. Intramolecular antiferromagnetic exchange interactions are present in the Mn(II)2, Fe(II)2 and Co(II)2 complexes where J = -5.1, -10.6 and approximately -2.0 cm(-1) (H = -2JS1S2). In contrast, in the dinickel complex 5 a ferromagnetic exchange interaction is present with J = +6.4 cm(-1). An explanation for this difference is qualitatively discussed in terms of the bonding differences.     

Studies on some salicylaldehyde Schiff base derivatives and their complexes with Cr(III), Mn(II), Fe(III), Ni(II) and Cu(II)

The formation constants of some transition metal ions Cr(III), Mn(II), Fe(III), Ni(II) and Cu(II) binary complexes containing Schiff bases resulting from condensation of salicylaldehyde with aniline (I), 2-aminopyridine (II), 4-aminopyridine (III) and 2-aminopyrimidine (IV) were determined pH-metrically in ethanolic medium (80%, v/v). The formation constants were determined for all binary complexes. The important infrared (IR) spectral bands corresponding to the active groups in the four ligands and the solid complexes under investigation were studied. The solid complexes have been synthesized and studied by thermogravimetric analysis. The thermal dehydration and decomposition of these complexes were studied kinetically using the integral method applying the Coats-Redfern equation. It was found that the thermal decomposition of the complexes follow second order kinetics. The thermodynamic parameters of the decomposition are also reported. The electronic absorption spectra of the investigated ligands were carried out to determine the pK(a) values spectrophotometrically.     

Properties of Monocarboxy Cellulose Containing Sorbed Fe(III), Al(III), and Cr(III) Cations

Sorption of Fe(III), Al(III), and Cr(III) on monocarboxy cellulose at various pH, concentrations of metal chloride or sulfate in solution, and time was studied. The effect of type and amount of the cation sorbed on the physicomechanical properties, swelling, and stability in phosphate buffer of monocarboxy cellulose fibers was considered.     

Studies on oxovanadium(IV), Cr(III), Co(II), Ni(II), and Cu(II) chelates of some bisketimino ligands

The oxovanadium(IV), Cr(III), Ni(II), Co(II), and Cu(II) chelates of some bisketimino Schiff-base ligands (H₂L) obtained by condensation of 4-butyryl-3-methyl-1-phenyl-(or-1,3-diphenyl)-2-pyrazolin-5-ones with thiourea were synthesized and characterized by elemental analyses and thermogravimetric analyses, molar conductivities, magnetic susceptibility measurements, mass, infrared, and electronic spectroscopies. Ligand field parameters, such as splitting energy, Racah parameter, spin–orbit coupling constant, and covalency parameter of the Cr(III), Ni(II), and Co(II) chelates were calculated by band-fitting methods. Based on these studies, tetragonally distorted octahedral environment around OV(IV) and Cu(II) and octahedral Cr(III), Ni(II), and Co(II) have been proposed.     

Zeolite-encapsulated Cr(III), Fe(III), Ni(II), Zn(II) and Bi(III) salpn complexes as catalysts for the decomposition of H2O2 and oxidation of phenol

Cr(III), Fe(III), Bi(III), Ni(II) and Zn(II) complexes of N,N′-bis(salicylidene)propane-1,3-diamine (H₂salpn) encapsulated in Y-zeolite were prepared by flexible ligand method. These complexes were characterized by chemical and thermal analyses, FT-IR and electronic spectral studies and their XRD pattern. The encapsulated materials are active catalysts for the decomposition of hydrogen peroxide and for the oxidation of phenol using H₂O₂ as oxidant with good selectivity.