Determination of heptacaine hydrochloride in solution using nuclear analytical methods

The applicability of two nuclear analytical methods for the determination of hepatacaine hydrochloride in solution was studied, i. e. radionuclide X-ray fluorescence analysis and radiometric titrations based on precipitate formations. Methods used were evaluated on the basis of obtained sensitivity values.     

Study of trace elements in milk by nuclear analytical techniques

This work is part of a project with the IAEA, in a coordinated program on Trace Elements in Human and Bio-Environmental Systems to evaluate their nutritional requirements, interrelations and the role of trace elements in health, metabolism, etc. Cow's milk being regarded as one of the most important and nutritious foodstuffs consumed by people. Hence as a first step, an elemental analysis for milk was carried out for this purpose; a few samples of pasteurized milk and local sample were investigated for essential and toxic trace elements. The secondary aim of this project was the assessment of various analytical techniques involved. However, in the present work, the methods involved were AAS, PIXE and NAA. The latter method was applied both instrumentally and radiochemically. Although the results pertaining to the various methods employed are not in good agreement. there is, however, some justification to clarify this internal inconsistency. The precision of NAA and AAS allows a greater degree of acceptance. Although PIXE is very fast and rather routine, the technique for trace element analysis needs certain adaptations and development.     

Determination of heavy metals in welder's working environment using nuclear analytical methods

Technological process of welding is significant source of pollution of working environment with heavy metals. Evaluation of chemical quality of working environment was made by means of radionuclide X-ray fluorescent analysis and activation analysis with fast neutrons. Welding aerosols were sampled by filtration method on Synpor 4 membrane ultra-filters. For selected types of welding filter metals, determination of heavy metals in aerosols was performed.     

Determination of trace elements in drinking tea by various analytical techniques

Tea has been one of the most popular simulating beverages which is both heavily produced and consumed in Taiwan. The determination of minor or trace elements in drinking tea and tea leaves is therefore important for estimating the daily intake of Taiwanese considered as a safety indicator. In order to accurately and precisely determine the concentrations of trace elements in samples, several analytical methods such as AAS, NAA and ICP-AES are suggested. This paper attempts to utilize all three methods to determine the concentrations of minor or trace elements in different types of tea leaves and the extracts percolated from them. The influence of fermentation processes on the concentration levels of minor or trace elements in tea samples is investigated. Because only free metal ions are bioavailable for the human body, it is necessary to determine their concentrations in drinking tea. The dissolution of trace elements in drinking tea is therefore studied by simulating the common Chinese style of tea percolation. Concentrations of thirteen elements including Zn, Mn, Ca, Cu, Ni, Al, K, Mg, Cd, Pb, Na, Co and Sc are determined.     

Determination of chloride content in concrete by nuclear methods

Chloride ions may be removed from reinforced concrete using an electroosmotic procedure. Process controlling requires a nondestructive analyzing method. For this purposes activation analysis with both thermal and fast neutrons has been investigated using low flux neutron sources. Results are compared and discussed for in-situ chloride determination.Presented at the MTAA-8 Conference, September 16–20, 1991, Vienna, Austria.     

Determination of elements in algae by different atomic spectroscopic methods

The chemistry of substances derived from plants has received a great deal of attention in the last several decades. Today, natural products and their synthetic analogs also play an important role in the pharmaceutical and food industry. Several interesting reviews on algae were published in the last 10 years. Algae, especially the red algae, are very helpful in every day practice in many fields, e.g. algal polysaccharides, agar, carrageenan and some algae extracts are used in agricultural, medicines and in food products, respectively (The Constituents of Red Algae, 1999; Gelling Hydrocolloids in Food Products Applications, 1979, p. 186; Marine Natural Products Chemistry, 1997, p. 337; Algae Polysaccharides, 1983, p. 195). The biological and pharmaceutical properties promote interest among chemists to focus their attention on algae, as yet, a wide open field (Synthesis and Proceedings of the Second EUMAC Workshop, Marine Eutrophication and Bentic Macrophytes, p. 2). The most extensively studied algal phyla are Chlorophyceae (green algae) (J. Phycol. 26 (1990) 670), Rhodophyceae (red algae) (J. Phycol. 25 (1989) 522) and Phaeophyceae (brown algae) (J. Phycol. 31 (1995) 325; J. Phycol. 32 (1996) 614). Concentrations of four elements (Ca, Mg, K, Na) were determined in the above-mentioned algal phyla by different atomic spectroscopic methods (F-AES, ICP-AES) after the digestion of algal samples with cc. HNO₃ in a microwave apparatus. Not only the Ca and Mg contents, but the ratio of the calcium to magnesium was calculated in every case. This ratio was lower (0.5–0.8) in green algae than in the red and brown algae (1.3–14.4). Therefore, the green algae are better magnesium sources than the red and brown. The elemental composition is of great importance in the ion system of human organism. It is usually characterized by the ion quotient ([Ca²⁺]+[Na⁺]:[Mg²⁺]+[K⁺]), which is approximately 1.0 under ideal conditions. However, in the human body this mole ratio generally varies between 2.5 and 4.0. The ion quotient was calculated by averaging between 1 and 2 in different algal phyla. This means that the 2.5–4.0 mole ratio can be decreased by different algal foods in the human organism.     

Determination of boron concentration in borosilicate glass,boron carbide and graphite samples by conventional wet-chemical and nuclear analytical methods

Boron is an important element in nuclear technology. A comparative study was carried out for the determination of boron in borosilicate glass, boron carbide and graphite samples by wet-chemical and nuclear analytical methods. Wet chemical methods namely titrimetry, Inductively Coupled Plasma Mass Spectrometry and ICP Optical Emission Spectrometry and nuclear analytical methods namely Particle Induced Gamma-Ray Emission and Nuclear Reaction Analysis were used. Boron concentrations were in trace (mg kg^?1) level in graphite and percentage level in borosilicate glass and boron carbide.     

A brief introduction to analytical methods in nuclear forensics

Nuclear forensic (NF) techniques are critical in responding to both environmental releases of nuclear materials and illicit trafficking activities involving both nuclear and counterfeit materials. Despite rising need, however, significant barriers exist to the future success of such research. This subset of analytical chemistry contains unique concerns (e.g. chronometry and impurity signatures), a wide variety of preparatory/instrumental approaches, and is in need of innovative solutions to current problems both in and out of the lab. The present work introduces existing NF research, development challenges and notes potential areas for advancement by highlighting several key analytical approaches. Examples of concerns and techniques discussed in this review include: chronometry, reference materials, separations, counting spectrometry, mass spectrometry and more.     

Determination of nifuroxazide and drotaverine hydrochloride in pharmaceutical preparations by three independent analytical methods

Three new, different, simple, sensitive, and accurate methods were developed for quantitative determination of nifuroxazide (I) and drotaverine hydrochloride (II) in a binary mixture. The first method was spectrophotometry, which allowed determination of I in the presence of II using a zero-order spectrum with an analytically useful maximum at 364.5 nm that obeyed Beer's law over a concentration range of 2-10 microg/mL with mean percentage recovery of 100.08 +/- 0.61. Determination of II in presence of I was obtained by second derivative spectrophotometry at 243.6 nm, which obeyed Beer's law over a concentration range of 2-10 microg/mL with mean recovery of 99.82 +/- 1.46%. The second method was spectrodensitometry, with which both drugs were separated on a silica gel plate using chloroform-acetone-methanol-glacial acetic acid (6 + 3 + 0.9 + 0.1) as the mobile phase and ultraviolet (UV) detection at 365 nm over a concentration range of 0.2-1 microg/band for both drugs, with mean recoveries of 99.99 +/- 0.15 and 100.00 +/- 0.34% for I and II, respectively. The third method was reversed-phase liquid chromatography using acetonitrile-water (40 + 60, v/v; adjusted to pH 2.55 with orthophosphoric acid) as the mobile phase and pentoxifylline as the internal standard at a flow rate of 1 mU/min with UV detection at 285 nm at ambient temperature over a concentration range of 2-10 microg/mL for both drugs, with mean recoveries of 100.24 +/- 1.51 and 100.08 +/- 0.78% for I and II, respectively. The proposed methods were checked using laboratory-prepared mixtures and were successfully applied for the analysis of pharmaceutical formulations containing the above drugs with no interference from other dosage form additives. The validity of the suggested procedures was further assessed by applying the standard addition technique which was found to be satisfactory, and the percentage recoveries obtained were in accordance with those given by the EVA Pharma reference spectrophotometric method.     

The handbook of analytical methods for trace elements as adopted by the national reference laboratories for residues

The instrumental approaches, quality assurance schemes and management of chemical laboratories should in general be harmonized at the highest possible level. This is all the more so for the national reference laboratories (NRLs) for residues in live animals and their products which have to implement quality assurance systems inspired to the principles of good laboratory practice as well as to the general norms for the operation of testing laboratories (EN 45000 criteria). Directive 23/96/EC of 29 April 1996 prescribes that NRLs are assisted in this process by the four community reference laboratories (CRLs) for residues. To this end, the Rome CRL systematically collects in a handbook all the analytical methods in use at NRLs for the determination of As, Cd, Cu, Hg and Pb, as well as other chemical elements, in animal matrices. One major goal of this action is to foster the harmonization of analytical approaches by the NRLs and their ability to provide comparable results of similar quality. The Rome CRL is committed to revise this handbook twice a year. The role of the handbook is also to encourage the exchange of information among the NRLs as regards the possibility of improving existing methods.     

Laser desorption/ablation combined with nuclear analytical methods for materials characterization

Ubiquitous elements like carbon and oxygen always contaminate surfaces and, therefore, are the soucre of important analytical errors at trace level. Even in the case of radioactivation (with charged particles), where the sample can be etched after irradiation, analytical problems exist. In this work, we show that laser desorption/ablation can efficiently clean surfacaes, in the case of GaAs samples, resulting in better analytical conditions. Under ultra high vacuum, these surfaces remain clean long enough, so that the analysis of carbon and oxygen can be carried out using various nuclear methods, according to the needs of the analyst.     

Growth of a journal reflects trends in the literature of nuclear analytical methods

The results of a scientometric analysis of 50 volumes of the Journal of Radioanalytical Chemistry (further on JRC) are presented. The investigated items are: growth of the journal, distribution of papers according to countries, language and topics, turnover of papers, distribution and growth of the number of papers published from various countries, doubling times as well as relationship of the JRC to other journals.     

Determination of element concentrations in biological reference materials by solid sampling and other analytical methods

Summary Using solid sampling with graphite furnace atomic absorption spectrometry (GFAAS), values for cadmium, copper, lead and zinc in six biological reference materials were obtained from up to four laboratories participating in three collaborative studies. These results are compared with those obtained with other methods used in routine analysis from laboratories of official food control. Under certain conditions solid sampling with GFAAS seems to be suitable for routine analysis as well as conventional methods.     

Determination of trace elements in plant materials by slurry sampling graphite furnace AAS — some analytical problems

Summary The analytical conditions of cadmium, lead, nickel and cobalt determination in plant material by slurry sampling graphite furnace atomic absorption spectrometry (GFAAS) are presented. The results of stability tests for slurries prepared in different ways are also shown. The ratio of the amount of analyte found in the liquid phase to the total amount of analyte in the slurries is investigated. The determination results are calculated from aqueous standard calibration graphs (cobalt and nickel) or by the standard addition method (cadmium and lead). Statistical evaluation of the results from the certified materials indicate that the slurry method is both accurate and comparable in precision to the conventional wet-ashing procedure.Presented at the 5th International Colloquium on Solid Sampling, with Atomic Spectroscopy, May 18–20, 1992; Geel, Belgium. Papers edited by R. F. M. Herber, Amsterdam     

Comparison of three analytical methods for the determination of trace elements in whole blood

Three different analytical techniques were compared in a study of the role of trace elements in multiple sclerosis. Data for eight elements (Cd, Co, Cr, Cu, Mg, Mn, Pb, Zn) from neutron activation, flame atomic absorption and electrothermal atomic absorption methods were compared and evaluated statistically. No difference (probability less than 0.001) was observed in the elemental values obtained. Comparison of data between suitably different analytical methods gives increased confidence in the results obtained and is of particular value when standard reference materials are not available.     

Determination of ultratrace elements in natural waters by solid-phase extraction and atomic spectrometry methods

A study was carried out on the preconcentration of ultratrace amounts of cadmium, lead, manganese, copper and iron from high-salinity aqueous samples and determination by atomic spectrometry methods. Sample volume, amount of resin, loading flow rate, and elution volume were optimized in order to obtain the simultaneous preconcentration of all the analytes. Quantitative recoveries were obtained by using 200 mg of iminodiacetic resin with a loading flow rate of 2 mL min(-1), elution volume of 3 mL and sample volume of 50-450 mL. Only copper in seawater samples was not completely retained by the resin (60-70% recovery), due to unfavorable competition of iminodiacetic-active groups with organically bound metal.To quantify the metals in the eluates, two atomic spectrometry techniques were compared: electrothermal atomization atomic absorption spectrometry (ETAAS) and inductively coupled plasma-optical emission spectrometry (ICP-OES) with simultaneous CCD detection system. Both techniques are suitable for sample analysis with detection limits of 1.0, 4.7, 3.3, 6.8, and 53 ng L(-1) using ETAAS and 12, 122, 3.4, 17, and 21 ng L(-1) using ICP-OES for Cd, Pb, Mn, Cu, and Fe, respectively. Relative standard deviations of the procedures ranged from 1.7 to 14% at the sub-microg L(-1) concentration level. The accuracy of both methods was verified by analyzing various certified reference materials (river water, estuarine water, coastal and off-shore seawater).     

Study of loss and recuperation of inorganic elements of osteoporotic rat bone with nuclear analytical techniques

Neutron activation analysis (NAA) and synchrotron radiation X-ray fluorescence analysis (SRXRF) were used to study the loss and recuperation of inorganic elements of osteoporotic rat bone and the effects of Zhugu Capsule. The results of the animal experiments showed that there was greater loss of multiple elements in cancellous bone than in cortical bone that was difficult to be improved. Yet in the mid-shaft femur, which is mainly consisted of cortical bone, the contents of multiple elements were notably recuperated. Zhugu Capsule could increase the content of not only of Ca, but also Zn and Sr. Further, it could also improve the distribution of these elements in femur.     

Determination of toxic elements by cathodic-stripping-voltammetry

Summary The DPCSV determination of arsenic, selenium and tellurium in the sub-ng/ml range is discussed. After electrolytic deposition of the elements as intermetallic compounds with copper on the electrode surface, the determination is carried out by cathodic stripping. The simultaneous determination of selenium and tellurium or of selenium and arsenic is possible. Problems which occur in the application of these methods are discussed.

---

Bestimmung toxischer Elemente durch CSV

Zusammenfassung Es werden Verfahren zur Bestimmung von Arsen, Selen und Tellur im sub-ppb-Bereich durch DPCSV beschrieben. Nach elektrolytischer Anreicherung der Elemente als intermetallische Verbindungen mit Kupfer auf der Elektrodenoberfläche erfolgt die Bestimmung auf der Grundlage der kathodischen Auflösung. Sowohl für Selen und Tellur als auch für Selen und Arsen ist die simultane Bestimmung möglich. Probleme bei der Anwendung dieser Bestimmungsverfahren werden diskutiert.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.