Incorporating water-release and lateral protein interactions in modeling equilibrium adsorption for ion-exchange chromatography

The equilibrium adsorption of two albumin proteins on a commercial ion exchanger has been studied using a colloidal model. The model accounts for electrostatic and van der Waals forces between proteins and the ion exchanger surface, the energy of interaction between adsorbed proteins, and the contribution of entropy from water-release accompanying protein adsorption. Protein-surface interactions were calculated using methods previously reported in the literature. Lateral interactions between adsorbed proteins were experimentally measured with microcalorimetry. Water-release was estimated by applying the preferential interaction approach to chromatographic retention data. The adsorption of ovalbumin and bovine serum albumin on an anion exchanger at solution pH>pI of protein was measured. The experimental isotherms have been modeled from the linear region to saturation, and the influence of three modulating alkali chlorides on capacity has been evaluated. The heat of adsorption is endothermic for all cases studied, despite the fact that the net charge on the protein is opposite that of the adsorbing surface. Strong repulsive forces between adsorbed proteins underlie the endothermic heat of adsorption, and these forces intensify with protein loading. It was found that the driving force for adsorption is the entropy increase due to the release of water from the protein and adsorbent surfaces. It is shown that the colloidal model predicts protein adsorption capacity in both the linear and non-linear isotherm regions, and can account for the effects of modulating salt.     

Investigation of the mechanism of protein adsorption on ordered mesoporous silica using flow microcalorimetry

The adsorption of bovine serum albumin (BSA) and lysozyme (LYS) on siliceous SBA-15 with 24 nm pores was studied using flow microcalorimetry; this is the first attempt to understand the thermodynamics of protein adsorption on SBA-15 using flow microcalorimetry. The adsorption mechanism is a strong function of protein structure. Exothermic events were observed when protein–surface interactions were attractive. Entropy-driven endothermic events were also observed in some cases, resulting from lateral protein–protein interactions and conformational changes in the adsorbed protein. The magnitudes of the enthalpies of adsorption for primary protein–surface interactions decrease with increased surface coverage, indicating the possibility of increased repulsion between adsorbed protein molecules. Secondary exothermic events were observed for BSA adsorption, presumably due to secondary adsorption made possible by conformational changes in the soft BSA protein. These secondary adsorption events were not observed for lysozyme, which is structurally robust. The results of this study emphasize the influence of solution conditions and protein structure on conformational changes of the adsorbed protein and the value of calorimetry in understanding protein–surface interactions.     

Influence of nanobubbles on the adsorption of nanoparticles

A quartz crystal microbalance was used to study the influence of nanobubbles on the adsorption of polystyrene nanoparticles onto surfaces coated with gold, or coated with dodecanethiol or mercaptoundecanoic acid self-assembled monolayers (SAMs). Adsorption of the nanoparticles onto the surface causes the resonant frequency of the quartz crystal to decrease. We found that particles were adsorbed onto the gold-coated quartz crystal in air-rich water, but not in degassed water. This finding supports the long-standing hypothesis that nanobubbles play a key role in the long-range attractive force between hydrophobic surfaces in aqueous solutions. When the experiments were conducted using quartz crystals coated with a hydrophobic dodecanethiol SAM, the nanoparticles were adsorbed onto the surface even in degassed water due to the short-range hydrophobic interactions between the nanoparticles and the dodecanethiol molecules. In contrast, the nanoparticles were adsorbed to a lesser degree onto the hydrophilic mercaptoundecanoic acid-coated crystals due to electrostatic repulsive forces.     

Selective adsorption of protein molecules on phase-separated sapphire surfaces

Site-selective adsorption of protein molecules was found on sapphire surfaces that exhibit a phase separation into two domains: weakly charged hydrophobic domain and negatively charged hydrophilic one. Ferritin and bovine serum albumin molecules, which are negatively charged in a buffer solution, are adsorbed to the hydrophobic domains. Avidin molecules, which are positively charged, are adsorbed to the other domain. Fibrinogen molecules, which consist of both negative and positive modules, are adsorbed to the whole sapphire surface. Hemoglobin molecules, whose net charge is almost zero, are also adsorbed to the whole surfaces. These results indicate that electrostatic double layer interaction is the primary origin of the observed selectivity. Dependence of protein adsorption or desorption behaviors on the pH value can also be interpreted by the proposed model.     

Change of zeta potential of biocompatible colloidal oxide particles upon adsorption of bovine serum albumin and lysozyme

The amounts of negatively charged bovine serum albumin and positively charged lysozyme adsorbed on alumina, silica, titania, and zirconia particles (diameters 73 to 271 nm) in aqueous suspensions are measured. The adsorbed proteins change the zeta potentials and the isoelectric points (IEP) of the oxide particles. The added to adsorbed protein ratios at pH 7.5 are compared with the protein treated particle zeta potentials. It is found that the amounts of adsorbed proteins on the alumina, silica, and titania (but not on the zirconia) particle surfaces are highly correlated with the zeta potential. For the slightly less hydrophilic zirconia particles high amounts of protein adsorption are observed even under repulsive electrostatic conditions. One reason could be that the hydrophobic effect plays a more important role for zirconia than electrostatic interaction.     

Driving Forces for Enzyme Adsorption at Solid-Liquid Interfaces: 2. The Fungal Lipase Lipolase

Lipolase is the trade name for a fungal lipase that can catalyze the hydrolysis of ester bonds in, for example, triacylglycerol molecules. An important characteristic of this enzyme is that it is water-soluble whereas its substrate is water-insoluble. The adsorption of Lipolase was studied on several polystyrene latices and glass in order to determine the effect of the nature of the solid phase and to determine the interactions which are of importance for the adsorption. Electrostatic interaction and dehydration of hydrophobic surfaces are the main driving forces for Lipolase adsorption. Under attractive electrostatic conditions between the surface and the enzyme, the plateau value of the isotherm corresponds to saturated monolayer coverage. Under conditions where dehydration of the hydrophobic surface is almost compensated for by electrostatic repulsion the lateral repulsion between the adsorbed enzymes becomes also important and contributes to the surface coverage. The adsorption mechanism of Lipolase is similar to that of the protein Savinase. However, Lipolase adsorbs much less on hydrophobic interfaces under electrostatic repulsive conditions than proteins examined in the literature, indicating that the dehydrated contact area between enzyme and surface is relatively small and that consequently the enzyme does not unfold significantly upon adsorption.     

Effect of polysaccharide structure on protein adsorption

Using X-ray photoelectron spectroscopy for quantification, the adsorption has been studied of chicken egg lysozyme, human serum albumin (HSA), bovine colostrum lactoferrin, and γ-globulin (IgG) from single solutions onto surface-immobilised polysaccharide coatings, which were produced by the covalent attachment of a series of carboxymethyldextrans (CMDs) onto aminated fluoropolymer surfaces. CMDs with differing degrees of carboxymethyl substitution were synthesized by the reaction of dextran with bromoacetic acid under different reactant ratios. Substantial amounts of protein adsorption onto these coatings were observed with the majority of the coating/protein combinations. On the most extensively substituted CMD (1 carboxyl group per 2 dextran units), lysozyme and lactoferrin adsorbed to approximately monolayer amounts whereas there was minimal adsorption of HSA, indicating the importance of electrostatic interfacial interactions. CMD 1:14 was similar whereas the least substituted, least dense coating, from CMD 1:30, adsorbed less lysozyme and lactoferrin but more HSA. Adsorption of the large multidomain protein IgG varied little with the coating. Grazing angle XPS data indicated that for the CMD 1:30 coating there occurred significant in-diffusion of the lower molecular weight proteins. The data suggest that elimination of adsorption of a broad spectrum of proteins is not straightforward with negatively charged polysaccharide coatings; elimination of protein accumulation onto/into such coatings may not be achievable solely with a balance of electrostatic and steric–entropic interfacial forces.     

Protein interactions with model chromatographic stationary phases constructed using self-assembled monolayers

Model surfaces representative of chromatographic stationary phases were developed by immobilising an homologous series (C2-C18) of n-alkylthiols, mixed monolayers of C4/C18 and thioalkanes with alcohol, carboxylic acid, amino and sulphonic acid terminal groups onto a flat, silver-coated glass surface using self-assembled monolayer (SAM) chemistry. The processes of adsorption and desorption of serum albumins onto the monolayer surfaces was monitored in real-time using surface plasmon resonance (SPR). Alkyl-terminated SAMs all showed a strong adsorption of bovine serum albumin which was largely independent of alkyl chain length, the ratio of mixed C4/C18 SAMs or the solution pH/ionic strength. The adsorption of human serum albumin to carboxylic and amine terminated SAMs was shown to be predominantly via non-electrostatic interactions (hydrophobic or hydrogen bonding). However, sulphonic acid terminated SAMs showed almost exclusively electrostatic interactions with human serum albumin. This preliminary work using self-assembled monolayer chemistry confirms the usefulness of well characterised SAMs surfaces for investigating protein adsorption and desorption onto/from model chromatography surfaces and gives some guidance for selecting appropriate functionalities to develop better surfaces for chromatography and electrophoresis.     

High salt stability and protein resistance of poly(L-lysine)-g-poly(ethylene glycol) copolymers covalently immobilized via aldehyde plasma polymer interlayers on inorganic and polymeric substrates

The electrostatic adsorption onto charged surfaces of comb copolymers comprising a polyelectrolyte backbone and pendent PEG side chains, such as poly(l-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), has in previous studies provided protein-repellent thin coatings, particularly on metal oxide surfaces. A drawback of this approach is, however, the instability of such adsorbed layers under extreme pH values or high ionic strength. We have overcome this limitation in the present study by covalently immobilizing PLL-g-PEG copolymers onto aldehyde plasma-modified substrates. Silicon wafers, optical waveguide chips, and perfluorinated ethylene-co-propylene (FEP) polymer substrates were first coated with a thin plasma polymer layer using a propionaldehyde plasma, followed by covalent immobilization of PLL-g-PEG via reductive amination between amine groups of the PLL backbone with aldehyde groups on the plasma-deposited interlayer. The stability in high salt media and the protein resistance of different molecular architectures of immobilized PLL-g-PEG layers were quantitatively investigated by XPS, an optical waveguide technique (OWLS), and ToF-SIMS. The adsorption of bovine serum albumin was found to be below the detection limit (<2 ng/cm(2)), as for electrostatically adsorbed PLL-g-PEG layers. However, after 24 h of exposure of covalently immobilized layers of PLL-g-PEG to high ionic strength buffer (2400 mM NaCl), no significant change in the protein resistance was observed, whereas under the same conditions electrostatically adsorbed PLL-g-PEG coatings lost their protein resistance. Moreover, covalent immobilization via an aldehyde plasma interlayer enabled the application of PLL-g-PEG layers onto substrates such as FEP onto which electrostatic binding is not possible. These findings create a generic platform for the covalent immobilization of PLL-g-PEG onto a wide variety of substrates.     

Adsorption of bovine serum albumin on polyelectrolyte-coated glass substrates: applications to colloidal lithography

The adsorption of bovine serum albumin (BSA) labeled with fluorescein isothiocyanate (FITC) on polyelectrolyte-coated glass substrates was investigated using fluorescence microscopy. Glass substrates may inhibit adsorption of proteins due to electrostatic repulsion. However, when the substrate is modified with a thin film of positively charged polyelectrolytes, proteins can be adsorbed due to the attractive electrostatic interactions. In this study, poly(allylamine-hydrochloride) (PAH) molecules, which have positively charged amino groups at pH 7, were used to generate a positively charged layer on the glass substrate. A surfactant, sodium dodecyl sulphate (SDS), was used to alter the glass-protein interaction and subsequently modulate the coverage of adsorbed protein. We applied this technique to control the heterogeneously charged microscopic patterns of biomolecules created when the adsorption of protein is done in conjunction with colloidal lithography.     

Adsorption of Bovine Serum Albumin and Lysozyme on Hydrophobic Calcium Hydroxyapatites

The adsorption of bovine serum albumin (BSA) and lysozyme (LSZ) to oleyl phosphate(OP)-grafted calcium hydroxyapatite (OP-CaHAP) with different degrees of hydrophobicity, ranging the number of surface oleyl group per unit nm2 (nO) from 0 to 2.60, was investigated. The pronounced effects of the hydrophobic moiety of adsorbent on protein adsorption were observed. The saturated amount of adsorbed BSA (ns) was increased up to nO = 0.6 by an enlargement of hydrophobic interaction between hydrophobic CaHAP particle and proteins. However, ns decreased at nO >/= 1.3 by increasing the electrostatic repulsive force between negatively charged BSA and OP-CaHAP particles. On the other hand, the ns value of LSZ was continuously increased up to nO = 2.0 and saturated by increasing either the hydrophobic interaction or the electrostatic attraction of positively charged LSZ and negatively charged OP-grafted CaHAPs. The BSA adsorption experiment revealed that the effect of positively charged adsorption sites on the exposed ac or bc crystal faces (C-sites) of the CaHAPs is screened by the OP-groups grafted on their particle surfaces. Copyright 1999 Academic Press.     

Adsorption of different amphiphilic molecules onto polystyrene latices

In order to know the influence of the surface characteristics and the chain properties on the adsorption of amphiphilic molecules onto polystyrene latex, a set of experiments to study the adsorption of ionic surfactants, nonionic surfactants and an amphiphilic synthetic peptide on different latex dispersions was performed. The adsorbed amount versus the equilibrium surfactant concentration was determined. The main adsorption mechanism was the hydrophobic attraction between the nonpolar tail of the molecule and the hydrophobic regions of the latex surface. This attraction overcame the electrostatic repulsion between chains and latex surface with identical charge sign. However, the electrostatic interactions chain-surface and chain-chain also played a role. General patterns for the adsorption of ionic chains on charged latex surfaces could be established. Regarding the shape, the isotherms presented different plateaus corresponding to electrostatic effects and conformational changes. The surfactant size also affects the adsorption results: the higher the hydrophilic moiety in the surfactant molecule the lower the adsorbed amount.     

Evaluation of the adsorption affinity of proteins to calcium hydroxyapatites by desorption and pre-adsorption methods

The adsorption affinity of bovine serum albumin (BSA) and lysozyme (LSZ) to calcium hydroxyapatite (CaHAP) was evaluated by desorption and two step adsorption methods. These experiments were carried out at 15°C in a 1×10⁻⁴ mol dm⁻³ KCl solution of pH 6.0. BSA molecules were scarcely desorbed, exhibiting an irreversible adsorption of BSA, though LSZ slightly desorbed. This result supports our previous findings that LSZ adsorbs weakly onto phosphate ions exposed on ac or bc faces of CaHAP while BSA adsorbs strongly onto positively charged sites on ac or bc faces of CaHAP. The amount of adsorbed LSZ was markedly increased by the pre-adsorption of BSA, where LSZ was adsorbed onto BSA-covered CaHAP. On the other hand, the amount of adsorbed BSA was not changed by the pre-adsorption of LSZ. In both pre-adsorption systems it was confirmed by an HPLC method that no protein molecule pre-adsorbed was desorbed after the post-adsorption procedure. Therefore, it was interpreted that the enhancement of adsorption of positively charged LSZ is induced by an electrostatic attractive force through pre-adsorption of negatively charged BSA molecules with a high coverage. However, since the coverage of LSZ onto CaHAP is considerably low, no stimulation of BSA adsorption occurred on the LSZ-covered surface. The formation of double protein adsorbed layers consisting of pre- and post-adsorbed proteins was proposed.     

Preparation of Functional Fluorescent Microspheres Used for HTS and Their Interaction with Biomolecules

There is considerable interest in protein adsorption onto microspheres because of its importance in a wide range of biomedical applications, such as artificial tissues and organs, drug delivery systems, biosensors, solid-phase immunoassays, immunomagnetic cell separation and immobilized enzymes or catalyst. It has been well known that the interaction between proteins and microspheres plays important roles in this process. Major interaction involved in the adsorption can be classified as electrostatic, hydrophobic and hydrogen-bonding. Indeed, adsorption of proteins onto microspheres is a complex process and often can involve many dynamic steps, from the initial attachment of the protein on the surface of microspheres to the equilibrium. Also the conformation of proteins probably occurs to a certain degree of deformation or structural change due to the large area of contact. Recently, much interest has been shown in sulfonated microspheres, since sulfonate-group itself is one of components in bio-bodies, as well as is sensitive to the change of pH or ionic strength. Indeed, so far, scanty investigations have been performed in the full range. Also few researches have involved the data on adsorption rate and the maximum amount of protein adsorbed, or the reversibility of the process and conformational change of protein adsorbed as well.In present study, BSA (bovine serum albumin) was chosen as the model protein and sulfonated PMMA [poly(methyl methacrylate)] microspheres as the matrix to investigate the adsorption process.The purpose is to show some information especially the intrinsic information involved by the adsorption process Adsorption of BSA onto sulfonated microspheres (MS) has been investigated as a function of time, protein concentration and pH. The adsorption appears to be a reversible process and the presence of sulfonate groups can play important roles in the adsorption process, so as to increase the amount of protein adsorbed and influences the interaction of BSA molecules. Fig. 1 also shows that the reciprocation between unadsorbed and adsorbed BSA or rearrangement of adsorbed BSA molecules does not produce visible change in the properties of the adsorbed protein. Close to the isoelectric point of BSA (pI 4.7), the amount of protein adsorbed exhibits a maximum. A higher or lower pH results in the significant decrease of the adsorption amount. This is related to the dependence of BSA conformations at different pH conditions.     

Physicochemical characteristics of protein-NP bioconjugates: the role of particle curvature and solution conditions on human serum albumin conformation and fibrillogenesis inhibition

Gold nanoparticles (Au NPs) from 5 to 100 nm in size synthesized with HAuCl(4) and sodium citrate were complexed with the plasma protein human serum albumin (HSA). Size, surface charge, and surface plasmon bands of the Au NPs are largely modified by the formation of a protein corona via electrostatic interactions and hydrogen bonding as revealed by thermodynamic data. Negative values of the entropy of binding suggested a restriction in the biomolecule mobility upon adsorption. The structure of the adsorbed protein molecules is slightly affected by the interaction with the metal surface, but this effect is enhanced as the NP curvature decreases. Also, it is observed that the protein molecules adsorbed onto the NP surface are more resistant to complete thermal denaturation than free protein ones as deduced from the increases in the melting temperature of the adsorbed protein. Differences in the conformations of the adsorbed protein molecules onto small (<40 nm) and large NPs were observed on the basis of ζ-potential data and FTIR spectroscopy, also suggesting a better resistance of adsorbed protein molecules to thermal denaturing conditions. We think this enhanced protein stability is responsible for a reduced formation of HSA amyloid-like fibrils in the presence of small Au NPs under HSA fibrillation conditions.     

The influence of electrostatic forces on protein adsorption

In this paper we investigate the importance of electrostatic double layer forces on the adsorption of human serum albumin by UV-ozone modified polystyrene. Electrostatic forces were measured between oxidized polystyrene surfaces and gold-coated atomic force microscope (AFM) probes in phosphate buffered saline (PBS) solutions. The variation in surface potential with surface oxygen concentration was measured. The observed force characteristics were found to agree with the theory of electrical double layer interaction under the assumption of constant potential. Chemically patterned polystyrene surfaces with adjacent 5 microm x 5 microm polar and non-polar domains have been studied by AFM before and after human serum albumin adsorption. A topographically flat surface is observed before protein adsorption indicating that the patterning process does not physically modify the surface. Friction force imaging clearly reveals the oxidation pattern with the polar domains being characterised by a higher relative friction compared to the non-polar, untreated domains. Far-field force imaging was performed on the patterned surface using the interleave AFM mode to produce two-dimensional plots of the distribution of electrostatic double-layer forces formed when the patterned polystyrene surfaces is immersed in PBS. Imaging of protein layers adsorbed onto the chemically patterned surfaces indicates that the electrostatic double-layer force was a significant driving force in the interaction of protein with the surface.     

Adsorption of albumin and IgG to porous and smooth titanium

The possibility to load submicrometer porous titanium surfaces with relatively small proteins, albumin and immunoglobulin G (IgG) was investigated. The loading ability is of interest due to the possibility of slow release of molecules from biomaterial surfaces, and may be important for the manipulation of wound healing around prostheses. Iodine-125 (125I) labeled albumin and IgG were adsorbed onto smooth and to porous titanium with a pore diameter of 200-300 nm. The smooth and porous surfaces were divided into three groups: hydrophilic, hydrophobic, or to amine-terminated silane (3-aminopropyltriethoxysilane) that bound proteins via glutaraldehyde. The protein solution pH and protein concentrations were varied, and the adsorption experiments made without or in the presence of calcium and magnesium ions. The adsorbed amounts were quantified with a gamma counter. Two to eleven times more proteins adsorbed onto porous than smooth surfaces and the adsorbed amounts increased with increasing protein concentration (0.1-10 mg/ml) during a constant incubation time. The elutability by sodium dodecyl sulphate (SDS) was incomplete on porous surfaces.     

Interpretation of protein adsorption: surface-induced conformational changes

Protein adhesion plays a major role in determining the biocompatibility of materials. The first stage of implant integration is the adhesion of protein followed by cell attachment. Surface modification of implants (surface chemistry and topography) to induce and control protein and cell adhesion is currently of great interest. This communication presents data on protein adsorption (bovine serum albumin and fibrinogen) onto model hydrophobic (CH(3)) and hydrophilic (OH) surfaces, investigated using a quartz crystal microbalance (QCM) and grazing angle infrared spectroscopy. Our data suggest that albumin undergoes adsorption via a single step whereas fibrinogen adsorption is a more complex, multistage process. Albumin has a stronger affinity toward the CH(3) compared to OH terminated surface. In contrast, fibrinogen adheres more rapidly to both surfaces, having a slightly higher affinity toward the hydrophobic surface. Conformational assessment of the adsorbed proteins by grazing angle infrared spectroscopy (GA-FTIR) shows that after an initial 1 h incubation few further time-dependent changes are observed. Both proteins exhibited a less organized secondary structure upon adsorption onto a hydrophobic surface than onto a hydrophilic surface, with the effect observed greatest for albumin. This study demonstrates the ability of simple tailor-made monochemical surfaces to influence binding rates and conformation of bound proteins through protein-surface interactions. Current interest in biocompatible materials has focused on surface modifications to induce rapid healing, both of implants and for wound care products. This effect may also be of significance at the next stage of implant integration, as cell adhesion occurs through the surface protein layer.     

Subsurface influence on the structure of protein adsorbates as revealed by in situ X-ray reflectivity

The adsorption process of proteins to surfaces is governed by the mutual interactions among proteins, the solution, and the substrate. Interactions arising from the substrate are usually attributed to the uppermost atomic layer. This actual surface defines the surface chemistry and hence steric and electrostatic interactions. For a comprehensive understanding, however, the interactions arising from the bulk material also have to be considered. Our protein adsorption experiments with globular proteins (α-amylase, bovine serum albumin, and lysozyme) clearly reveal the influence of the subsurface material via van der Waals forces. Here, a set of functionalized silicon wafers enables a distinction between the effects of surface chemistry and the subsurface composition of the substrate. Whereas the surface chemistry controls whether the individual proteins are denatured, the strength of the van der Waals forces affects the final layer density and hence the adsorbed amount of proteins. The results imply that van der Waals forces mainly influence surface processes, which govern the structure formation of the protein adsorbates, such as surface diffusion and spreading.     

Conformational changes of the amyloid beta-peptide (1-40) adsorbed on solid surfaces

The conformational change of the 39-43 residues of the amyloid beta-peptide (Abeta) toward a beta-sheet enriched state promotes self-aggregation of the peptide molecules and constitutes the major peptide component of the amyloid plaques in Alzheimer patients. The crucial question behind the self-aggregation of Abeta is related to the different pathways the peptide may take after cleavage from the amyloid precursor proteins at cellular membranes. This work is aiming at determining the conformation of the Abeta (1-40) adsorbed on hydrophobic Teflon and hydrophilic silica particles, as model sorbent surfaces mimicking the apolar transmembrane environment and the polar, charged membrane surface, respectively. The mechanism by which the Abeta interacts with solid surfaces strongly depends on the hydrophobic/hydrophilic character of the particles. Hydrophobic and electrostatic interactions contribute differently in each case, causing a completely different conformational change of the adsorbed molecules on the two surfaces. When hydrophobic interactions between the peptide and the sorbent prevail, the adsorbed Abeta (1-40) mainly adopts an alpha-helix conformation due to H-bonding in the apolar part of the peptide that is oriented towards the surface. On the other hand, when the peptide adsorbs by electrostatic interactions beta-sheet formation is promoted due to intermolecular association between the apolar parts of the adsorbed peptide. Irrespective of the characteristics of the solid sorbent, crowding the surface results in intermolecular association between adsorbed molecules leading to a strong aggregation tendency of the Abeta (1-40). [Diagram: see text] CD spectra of Abeta (1-40) at pH 7: A) in solution ([Abeta]=0.2 mg.ml(-1)) freshly prepared (line) and after overnight incubation (symbols);B) on Teflon (Gamma=0.5 mg.m(-2)).