Surface chemical and physical properties of TEOS-TBOT-PDMS hybrid materials

The application of nitrogen adsorption, mercury porosimetry and inverse gas chromatography (IGC) for the examination of surface physical and chemical properties of hybrid materials is discussed. Hybrid materials were prepared from tetraethoxysilane (TEOS), tetrabutyl orthotitanate (TBOT), and hydroxyl terminated polydimethyl siloxane (PDMS) for different TBOT concentrations. It was found that TBOT affects specific surface areas, pore volumes and pore sizes, but does not affect pore morphology. Surface chemical properties were analyzed by IGC. It was found that the dispersive surface energy was a function of the material pore size. Values between 36 and 42 mJ···m^-2 were obtained for the dispersive surface energy which are consistent with those of hybrid materials. On the other hand, the acid-base (k , k ) surface constants showed good correlation with the TBOT concentration. These materials can be considered as anphoteric ones, and it was found that k increases from 1.07 to 1.47, and k increases from 0.76 to 1.73 when the TBOT concentration increases from 0 to 7%. Such increase is assigned to the formation of Si–O–Ti bonds as it was deduced from an IR band appearing at 930 cm^-1 in the FT-IR spectra.     

Volumetric, Electric, and Magnetic Properties of Thioxanthen-9-one in Aprotic Solvents as Revealed by High-Precision Densitometry, High-Accuracy Refractometry and Magnetic Susceptibility Measurements and by DFT Calculations

High-precision densitometry measurements of solutions of thioxanten-9-one (TX) in 1,4-dioxane, DMSO, toluene, and benzene have been obtained at 293.15, 303.15, 313.15, 323.15, 333.15, and 343.15K. The partial molar volumes of TX ( ) and the corresponding values at infinite dilution ( ) were determined. The partial molar expansibility ( ) of TX at infinite dilution in each solvent is temperature independent. Dynamic electronic polarizabilities of TX in each aprotic solvent were determined by the Singer–Garito approach. These values are in excellent concordance with the theoretical value for TX of 2.611×10⁻²³cm³ estimated here using DFT/B3LYP/6-311++G(d,p). The partial molar volumes of TX at infinite dilution were calculated and interpreted in terms of the Scale Particle Theory (SPT). The solvent influence on the partial molar volume of TX was found to be due mainly to cavity formation and intermolecular dispersion forces.     

A class of orthogonal polynomials suggested by a trigonometric Hamiltonian: Antisymmetric states

This is the second in a series of papers dealing with the sets of orthogonal polynomials generated by a trigonometric Hamiltonian. In the first of this series, a subclass of the Jacobi polynomials denoted by and referred to as the -polynomial of the first kind, which arises in the investigation of the symmetric state eigenfunctions of the Hamiltonian under consideration, was examined. Another subclass of the Jacobi polynomials denoted by is introduced here representing the antisymmetric states, and is called in accordance the -polynomial of the second kind. Moreover, by the derivation of the ultraspherical polynomial wavefunctions, interrelations between the -polynomials of the first and second kinds as well as the other orthogonal polynomial systems are also emphasized.AMS subject classification: 33C45, 81Q05, 33C05     

Studies on a new dinuclear Co<Superscript>II</Superscript>–pterin complex exhibiting reactivity towards phenylalanine and bromobenzene

2-Pivaloylamino-6-acetonyl-isoxanthopterin (1, ) has been reacted with under suitable conditions for synthesizing the new compound ] (2). It has been characterized by elemental analysis, electrospray ionization mass spectrometry, magnetic susceptibility measurement, different spectroscopic techniques, and cyclic voltammetry. Molecular mechanics (MM2) method provided with its optimized geometry (having lowest steric energy), consistent with the above data; the optimized bond lengths and bond angles data tally with the literature X-ray structural data. Reactivity of (2) towards phenylalanine in the presence of in methanol has been followed both kinetically and stoichiometrically; a reasonable amount of tyrosine could be recovered from the reaction medium. The negative value (−274.0 J mol⁻¹ indicates an associative pathway for this process. (2) is also able to react with bromobenzene as indicated by time-dependent absorption spectra as well as product identification. Efficacy of the pterin ligand residue of (2) in rendering the latter reactive towards the above-mentioned organic compounds, has been discussed on the basis of experimental evidence.     

Synthesis, characterization and chromotropic properties of MnII, CoII, NiII and CuII with bis (acesulfamato) bis ( 3 -methylpyridine) complexes

The novel 3- [M: Mn^II, Co^II, and Ni^II] and 3- complexes (acs: acesulfamate; 3-pic: 3-methylpyridine) have been synthesized and characterized using elemental analyses, magnetic moments, UV–Vis and FT-IR spectra. The thermal behaviour of the complexes was also studied by simultaneous TG, DTG and DTA methods in static air atmosphere. The chromotropic properties of all complexes have been studied using thermal and spectral analysis. While the complexes of Co^II and Ni^II show reversible continuous thermochromism, an irreversible discontinuous thermochromism is observed in the Mn^II and Cu^II) complexes in the solid state. The observed thermochromism in the Mn^II, Co^II and Ni^II complexes is due to the different ligand field strength associated with the deaquation reaction. The solvatochromic behaviour of the complexes is also studied and all anhydrous complexes (except Mn^II) exhibit solvatochromic properties depending on the donor number of the solvent.     

Doubly Bridged Dinuclear Cadmium(II)azido Schiff Base Complexes: Synthesis, X-Ray Structure and Luminescence Properties of [Cd(L)(N3)]2(Y)2 [L = Schiff Bases, Y = ClO4 −, PF6 −]

Three new Schiff bases, -(bis(pyridin-2-yl)alkylidene)butane-1,4-diamine [(py)(R)C=N-(CH)N=C(R)(py), L: py = pyridine; R = H, -(bis(pyridin-2-yl)formylidene)butane-1,4-diamine (bpfd); R = Me, -(bis(pyridin-2-yl)methylidene)butane-1,4-diamine (bpmd); R = C, -(bis(pyridin-2-yl)bezylidene)butane-1,4-diamine (bpbd)] were prepared and used to synthesize six dinuclear cadmium(II)azido complexes of type [Cd(L)(N)](Y) [L = bpfd, Y = ClO (1a); L = bpfd, Y = PF (1b); L = bpmd, Y = ClO (2a); L = bpmd, Y = PF (2b); L = bpbd, Y = ClO (3a); and L = bpbd, Y = PF (3b)]. Two representative members of the series, 3a and 3b, have been characterized by single crystal X-ray diffraction measurements. Structural study reveals that each cadmium center in both dinuclear compounds is located in a distorted octahedral coordination environment surrounded by six nitrogen atoms—four (N1, N2, N3, N4) from tetradentate ligand, and the fifth and sixth positions occupied by nitrogen atoms (N5, N5^*) of doubly end-on bridging azides. The complexes display intraligand ¹ fluorescence and intraligand ³ phosphorescence in glassy solutions (MeOH at 77 K).     

Solid State Supramolecular Complexes [Hg<Subscript>6</Subscript>As<Subscript>4</Subscript>](CuX<Subscript>3</Subscript>)<Subscript>2</Subscript> (X <Emphasis Type="Bold">=</Emphasis> Cl,Br): One-Dimensional Helical Guest in a Three-Dimensional Host Framework

Two new supramolecular complexes, [Hg₆As₄](CuBr₃)₂ (1) and [Hg₆As₄](CuCl₃)₂ (2), have been synthesized and their crystal structures have been determined. Compound 1 crystallizes in the monoclinic system, space group I2/a (No. 15), with the unit cell dimensions a = 14.884(3), b = 9.358(2), c = 20.413(4) Å, β=92.88(3)°, and Z = 6. The crystal structure is comprised of the three-dimensional [Hg₆As₄]⁴⁺ polycationic framework hosting one-dimensional 6-step helical (CuBr guest chains built of the [CuBr₄] tetrahedra sharing two of their vertexes. The complex 2 exhibits a distorted variant of the same type of crystal structure (space group I2/a, a = 14.690(1), b = 9.1851(7), c = 20.285(1) Å, β=92.170(1), and Z = 6) that is characterized by a multifarious positioning of the guest anions in the cavities of the perfectly ordered [Hg₆As₄]⁴⁺ host framework. Structures of the title supramolecular assemblies and the previously reported silver-containing analogue [Hg₆As₄](AgCl₃)₂ are discussed taking into account the principles of host–guest complementarity.     

New Method for Determining the Degree of Cellulose I Crystallinity by Means of FT Raman Spectroscopy

A Raman crystallinity index – Xc_Raman – characterizing the degree of crystallinity of partially crystalline cellulose I samples was created, utilizing the crystallinity dependence of CH₂ bending modes. For calibration, physical mixtures containing different mass fractions of crystalline cellulose I and its amorphous form were prepared. Crystallinities from 0 to 60% were generated. Relative intensity ratios of the Raman lines I and I characterizing crystalline and amorphous parts of cellulose I correlated linearly with the mass fraction of crystalline cellulose I of the mixtures. Xc_Raman values of microcrystalline celluloses of different origins and varying degree of crystallinity correlated reasonably with results obtained from NMR spectroscopy (Xc_NMR values).     

Synthesis, characterization and redox properties of macrocyclic Schiff base by reaction of 2,6-diaminopyridine and 1,3- bis (2-carboxyaldehyde phenoxy)propane and its CuII, NiII, PbII, CoIII and LaIII complexes

A new macrocyclic ligand, 1,3,5-triaza-2,4:7,8:,14,15-tribenzo-9,13-dioxacyclohexadeca-1,5-diene (L) was synthesized by reaction of 2,6-diaminopyridine and 1,3-bis(2-carboxyaldehyde phenoxy)propane. Then, its Cu^II, Ni^II, Pb^II, Co^III and La^III complexes were synthesized by a template effect by reaction of 2,6-diaminopyridine and 1,3-bis (2-carboxyaldehyde phenoxy)propane and Cu O, Ni O, Co O, La O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H- and ¹³C-NMR-, UV-vis spectra, magnetic susceptibility, conductivity measurements, mass spectra and cyclic voltammetry. All complexes are diamagnetic and the Cu^II complex is binuclear. The diamagnetic behaviour of the binuclear complex may be explained by a very strong anti-ferromagnetic interaction in the Cu–Cu pair. The Co^II was oxidised to Co^III.     

Rheology, UV-vis transparency and particle size of modified Yoldas sols

Alumina sols were prepared using a modified Yoldas procedure, thus resulting in sols with high solids content, excellent long term stability and small particle size. PH-value ranged between 3.7 and 0.6. Sols were characterised using rheological, UV-vis transmission and particle size measurements. Depending on molar ratio as well as solids content, sols vary. Analysis of reduced viscosities indicate the formation of chainlike polymeric species above a critical solids fraction.     

The graphical representation of equilibrium for the isothermal and isobaric reactions of ideal gases

The equilibrium for the isothermal and isobaric reactions of ideal gases is investigated in virtue of the intuitionistic figure. The curve is similar to the curve of tangential function which has one inflection and two vertical asymptotes. The equation only has one root ξ _e and it is suitable to find ξ _e by dichotomy. For non-inert substance, when or x_i^0 $$" align="middle" border="0"> , to increase substance i will make an equilibrium shift in the direction to deplete substance i; when {\nu_i} \mathord{\left/ {\vphantom {{\nu_i} {\sum_i {\nu _i}}}} \right. \kern-\nulldelimiterspace} {\sum _i {\nu _i}}> 0$$" align="middle" border="0"> , to increase substance i will make an equilibrium shift in the direction to produce more substance i.     

Cluster Models of Co2+ at the Cation Sites of Zeolite ZSM-5

The local structure of Co₂₊ at the -, , and -cation sites of zeolite ZSM-5 was calculated in terms of density functional theory using the cluster approach. The local geometry of the oxygen environment of Co₂₊ is characterized; it is found that the ion stabilization energy increases in the series .     

17O NMR Investigation of Chemical Homogeneity in Hybrid Systems

¹⁷O NMR experiments using enriched water were performed to followthe hydrolysis-condensation process of dimethyldiethoxysilanetetraethoxysilane and a 1/1 mixture of dimethyldiethoxysilane andtetraethoxysilane (H₂O/OEt = 0.5; pH = 2). The spectrarecorded over several hours time period were simulated to followquantitatively the variations of residual water, hydroxyl groups(Si–¹⁷ H) and oxo bridges (Si–¹⁷ –Si). Presence of a resonance signal due oxo bridges between di- andtetrafunctional Si units clearly demonstrates that co-condensationreactions occur to a large extent between the two alkoxides, and that thesebonds are stable during the aging period.     

A generalized self‐consistent‐field procedure in the improved BCS theory

The basic ideas of the Improved Bardeen–Cooper–Schrieffer (IBCS) approach to the first and secondorder Reduced Density Matrices (1 and 2RDM) are briefly reviewed. The molecular orbital occupations are expressed by means of new quantities , which, satisfying a trigonometric relation, guarantee the nonidempontent condition. Thus, a variational method is introduced to determine , involving only an unconstrained minimization which may be performed using a conjugate gradient technique. A new effective Hamiltonian which is composed of the Coulomb, exchange and exchangetime inversion operators is also presented. It leads exactly to equations of Hartree–Fock type, however, the electronic field includes now an arbitrary number of orbitals and fractional occupation numbers. Accordingly, a generalized selfconsistentfield method is proposed: the iterative procedure is repeated until convergence is reached for the actual density matrix.     

An <Emphasis Type="Italic">ab initio </Emphasis> Quantum-Chemical Study of C<Subscript>6</Subscript>H<Subscript>5</Subscript>S(O)CH<Subscript>3</Subscript> and C<Subscript>6</Subscript>H<Subscript>5</Subscript>S(O)CF<Subscript>3</Subscript>

The potential functions of internal rotation around the C -S bond in the C₆H₅S(O)CH₃ and C₆H₅S(O)CF₃ molecules were obtained by ab initio MP2(full)/6-31+G* calculations. The stationary points were identified by solving the vibrational problems. The structures in which the plane of the C -S-C bonds is approximately perpendicular to the benzene ring plane correspond to the energy minimum. The barriers to rotation around the C -S bond, corrected for the zero-point vibration energy, are 21.29 [C₆H₅S(O)CH₃] and 28.98 [C₆H₅S(O)CF₃] kJ mol⁻¹. The bond angles (deg) are as follows: 95.7 (CSC), 107.1 (C SO), 106.3 (C SO) in C₆H₅S(O)CH₃; 93.5 (CSC), 108.2 (C SO), 105.2 (C SO) in C₆H₅S(O)CF₃. The bond lengths are as follows (Å): 1.520 (S=O), 1.804 (C -S), 1.810 (C -S) in C₆H₅S(O)CH₃; 1.507 (S=O), 1.799 (C -S), 1.870 (C -S) in C₆H₅S(O)CF₃. According to the results of NBO calculations, the formally double S=O bond consists of a strongly polarized covalent σ bond (S→O) and an almost ionic bond. An increase in the S=O bond multiplicity relative to a single bond is mainly due to hyperconjugation by the mechanism n(O)→σ*(C -S) and n(O)→σ*(C -S) and, to a lesser extent, by interaction of the oxygen lone electron pairs with the Rydberg orbitals of the S atoms, characterized by a large contribution of the d component.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 1, 2005, pp. 96–104.Original Russian Text Copyright © 2005 by Bzhezovskii, Il’chenko, Chura, Gorb, Yagupol’skii.     

Reaction graphs and a construction of reaction networks

Summary A general definition of reaction graphs is presented. For a pair of isomeric molecular graphs and , related by a chemical transformation , the reaction graph is determined using a maximal common subgraph defined for vertex mapping . A binary operation defined for graphs constructed over the same vertex set enables us to decompose the reaction graph into the sum of prototype reaction graphs. A decomposition of an overall reaction graph can be advantageously used for the construction of a reaction network. An oriented path in this network beginning at and ending at corresponds to a breakdown of the transformation into a sequence of intermediates.     

Thick Fe2O3, Fe3O4 films prepared by the chemical solution deposition method

Fe₂O₃, Fe₃O₄ films have been prepared from Fe(OCH₂CH(CH₃)₂)₃–(CH₃)₂CHCH₂OH–2.2′-diethanola- mine (DEA)–poly(vinylpyrrolidone) (PVP) solutions by the spin-(SC) and dip-coating (DC) technique on SiO₂ and Si substrates. The maximum film thickness achieved without crack formation has been increased by incorporation of PVP (relative molecular weights 40000 and 360000) into the precursor solution. The stability of the precursor solutions was remarkably increased by addition of DEA. Compact, dense, and crack-free Fe₂O₃ films with thicknesses 900 nm (DC), 450 nm (SC), have been obtained via single-step deposition cycle. Higher-molecular-weight PVP has been more effective in increasing the thickness. The minimum concentration of DEA, which results in pronounced increase of solutions stability, is about R _P (n(DEA)/n(Fe) = 0.1). The high content of carboneous residue in the pyrolysed Fe₂O₃ films promotes the formation of Fe₃O₄ films via reduction in a gas flow of H₂/N₂ gas mixture. Microstructure, surface morphology, and magnetic properties of the films have been also investigated using SEM, AFM, and SQUID, respectively.     

Nitrogen Trichloride Decomposition in the Presence of Molecular Hydrogen: I. Promotion of Nitrogen Trichloride Decomposition by Molecular Hydrogen Additives Near the Lower Self-Ignition Limit

The promotion of the branched-chain decomposition of nitrogen trichloride by molecular hydrogen additives at room temperature and 20 torr manifests itself in a decrease in the induction period and the acceleration of reactant consumption with an increase in the hydrogen concentration in the NCl₃+ H₂+ He mixtures. The emission spectrum of the H₂+ NCl₃flame contains the intense bands of NCl (b ¹⁺– X ^3–, = 1 – 0, = 0 – 1, and = 0 – 0, where is the vibrational quantum number) and the bands of a hydrogen-free compound. The latter bands can be assigned to electronically excited NCl ₂radicals formed in the H + NCl₃reaction. The calculations restrict the number of elementary reactions favoring promotion. The promotion effect in the system studied should be due to the side reaction of linear branching. The occurrence of the H + NCl₃reaction via two pathways (NHCl + 2Cl and NCl ₂+ HCl) ensures the qualitative agreement between the experimental data and calculation.     

Comprehensive Investigation of Yttrium and Rare Earth Element Complexation by Carbonate Ions Using ICP–Mass Spectrometry

Carbonate stability constants for yttrium and all rare earth elements have been determined at 25°C and 0.70 molal ionic strength by solvent exchange and inductively coupled plasma–mass spectrometry (ICP–MS). Measured stability constants for the formation of and from M³⁺ are in good agreement with previous direct measurements, which involved the use of radio-chemical techniques and trivalent ions of Y, Ce, Eu, Gd, Tb, and Yb. Direct ICP–MS measurements of and formation constants are also in general agreement with modeled stability constants for the metals La, Pr, Nd, Sm, Dy, Ho, Er, Tm, and Lu, based on linear-free energy relationship (LFER). The experimental procedures developed in this work can be used for assessing the complexation behavior of other geochemically important ligands such as phosphate, sulfate, and fluoride.     

Heuristic lipophilicity potential for computer-aided rational drug design: Optimizations of screening functions and parameters

In this research we test and compare three possible atom-basedscreening functions used in the heuristic molecular lipophilicity potential(HMLP). Screening function 1 is a power distance-dependent function, b , screening function 2is an exponential distance-dependent function, b_iexp( , and screening function 3 is aweighted distance-dependent function, For every screening function, the parameters ( ,d₀, and are optimized using 41 common organic molecules of 4 types of compounds:aliphatic alcohols, aliphatic carboxylic acids, aliphatic amines, andaliphatic alkanes. The results of calculations show that screening function3 cannot give chemically reasonable results, however, both the powerscreening function and the exponential screening function give chemicallysatisfactory results. There are two notable differences between screeningfunctions 1 and 2. First, the exponential screening function has largervalues in the short distance than the power screening function, thereforemore influence from the nearest neighbors is involved using screeningfunction 2 than screening function 1. Second, the power screening functionhas larger values in the long distance than the exponential screeningfunction, therefore screening function 1 is effected by atoms at longdistance more than screening function 2. For screening function 1, thesuitable range of parameter d₀ is 1.5 < d₀ < 3.0, and d₀ = 2.0 is recommended. HMLP developed in this researchprovides a potential tool for computer-aided three-dimensional drugdesign.