GaN nanotweezers

A new form of GaN nanomaterial (nanotweezers) has been obtained by chemical vapor deposition on an etched cubic MgO (100) plane. The nanotweezers consist of a bottom rod and two arms. The bottom rods have diameters of about 100–150 nm and lengths of about 200–500 nm, on which two arms grow out. The bottoms of the arms are about 40–70 nm and the tops are about 15–30 nm in diameter, and 0.8–1.5 μm in length. X-ray and electron diffractions indicate the nanotweezers are zinc blende gallium nitride. We infer that the fabrication of the GaN nanotweezers is associated with small convex hillocks on the surface of the etched cubic MgO (100) single-crystal substrates and that the nanotweezers grow by a growth mechanism that is similar to vapor-phase heteroepitaxy. Received: 23 April 2002 / Accepted: 25 April 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +86-10/8264-9531, E-mail: xlchen@aphy.iphy.ac.cn     

A prototype of a rationally designed chemically powered Brownian motor

The design and development of a molecular system functioning as a prototype of a Brownian motor is presented. The road towards the molecular motor is illustrated with previous attempts preparing other mechanical devices, such as a molecular brake and a molecular ratchet. Thermal and chemical energy are used to achieve unidirectional rotation in the Brownian motor. The similarities of synthetic molecular devices with biological – microscopic – and mechanical – macroscopic – systems and the perils of extrapolating macroscopic principles to the molecular level are also discussed. Received: 15 November 2001 / Accepted: 14 January 2002 / Published online: 22 April 2002     

Application of mid-infrared cavity-ringdown spectroscopy to trace explosives vapor detection using a broadly tunable (6–8 μm) optical parametric oscillator

A novel instrument, based on cavity-ringdown spectroscopy (CRDS), has been developed for trace gas detection. The new instrument utilizes a widely tunable optical parametric oscillator (OPO), which incorporates a zinc–germanium–phosphide (ZGP) crystal that is pumped at 2.8 μm by a 25-Hz Er,Cr:YSGG laser. The resultant mid-IR beam profile is nearly Gaussian, with energies exceeding 200 μJ/pulse between 6 and 8 μm, corresponding to a quantum conversion efficiency of approximately 35%. Vapor-phase mid-infrared spectra of common explosives (TNT, TATP, RDX, PETN and Tetryl) were acquired using the CRDS technique. Parts-per-billion concentration levels were readily detected with no sample preconcentration. A collection/flash-heating sequence was implemented in order to enhance detection limits for ambient air sampling. Detection limits as low as 75 ppt for TNT are expected, with similar concentration levels for the other explosives. Received: 1 April 2002 / Revised version: 13 June 2002 / Published online: 12 September 2002 RID="*" ID="*"Corresponding author. Fax: +1-408/524-0551, E-mail: mtodd@picarro.com     

A simple wet-chemical synthesis and characterization of CuO nanorods

Using a simple wet-chemical route, we synthesized CuO nanorods with diameters of ca. 5–15 nm and lengths of up to 400 nm. The purity, crystallinity, morphology, structure features, and chemical composition of the as-prepared CuO nanorods were investigated by powder X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. Received: 22 March 2002 / Accepted: 12 June 2002 / Published online: 28 October 2002 RID="*" ID="*"Corresponding author. Fax: +86-25/359-5535, E-mail: wangqun@nju.edu.cn     

Dielectric breakdown of rubber materials by femtosecond irradiation

We report the reversible micro-structuring of a synthetic rubber polymer (cis1,4-polybutadiene (PB)) by femtosecond laser illumination. Visco-elastic relaxation of the optically damaged region was observed. The recovery time, typically 10²–10⁴ ms, can be varied by changing the irradiation pulse energy. Multi-shot-induced damage recovers on the much longer scale of 10¹–10² s. It was found that the doping of PB by 4 wt. % of pentazadiene ([4-NO₂]–phenyl–N=N–N(C₃H₇)–N=N–phenyl–[4-NO₂]) reduces the threshold of light-induced photo-modification by 20%. This is explained by photo-induced (homolytic) cleavage of the pentazadiene bonds and formation of gaseous N₂, which facilitates material failure at the irradiated spot. The recovery of optical transmission can be applied to optical memory, optical and micro-mechanical applications. The underlying mechanism of the phenomenon is discussed in terms of anelastic α- and β-relaxation (polymer backbone and chains/coils relaxation, respectively). Received: 11 October 2001 / Accepted: 9 July 2002 / Published online: 25 October 2002 RID="*" ID="*"Corresponding author. Fax: +81-88/656-7598, E-mail: misawa@eco.tokushima-u.ac.jp     

Charge-carrier dynamics in single-wall carbon nanotube bundles: a time-domain study

We present a real-time investigation of ultra-fast carrier dynamics in single-wall carbon nanotube bundles using femtosecond time-resolved photoelectron spectroscopy. The experiments allow us to study the processes governing the sub-picosecond and the picosecond dynamics of non-equilibrium charge carriers. On the sub-picosecond time scale the dynamics are dominated by ultra-fast electron–electron scattering processes, which lead to internal thermalization of the laser-excited electron gas. We find that quasiparticle lifetimes decrease strongly as a function of their energy up to 2.38 eV above the Fermi level – the highest energy studied experimentally. The subsequent cooling of the laser-heated electron gas to the lattice temperature by electron–phonon interaction occurs on the picosecond time scale and allows us to determine the electron–phonon mass-enhancement parameter λ. The latter is found to be over an order of magnitude smaller if compared, for example, with that of a good conductor such as copper. Received: 4 March 2002 / Accepted: 7 March 2002 / Published online: 3 June 2002     

Low-threshold field electron emission of Si micro-tip arrays produced by laser ablation

Low-threshold field electron emission (FEE) is reported for periodic arrays of micro-tips produced by laser ablation of Si wafers. The best samples show emission at threshold fields as low as 4–5 V/μm for n-type Si substrates and of 1–2 V/μm for p-doped Si substrates, as measured with a flat-screen technique. Auger electron spectroscopy and X-ray electron spectroscopy reveal island-like deviation of the SiO₂ stoichiometry on the tip surfaces, with lateral dimensions of less than 100 nm. Microscopic studies using a special field-emission STM show that the emission originates from well-conducting regions of sub-micron size. The experimental data suggest FEE from the tip arrays by a geometric field enhancement of both the individual micro-tip and the narrow conducting channels in the tip body. Received: 3 May 2002 / Accepted: 1 July 2002 / Published online: 28 October 2002 RID="*" ID="*"Corresponding author. Fax: +7-095/135-82-34, E-mail: shafeev@kapella.gpi.ru     

Silicon nanowires grown from Au-coated Si substrate

Amorphous Si nanowires were grown on an Au-coated Si substrate by heat treatment at 1000 °C under an H₂ atmosphere. The nanowires have a length of several tens of a micron and a diameter of 10–20 nm. The growth mechanism of the nanowires was investigated and explained with a solid–liquid–solid model. Received: 11 July 2002 / Accepted: 7 July 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +86/10-62751615, E-mail: yudp@pku.edu.cn     

Quantum ratchets and quantum heat pumps

Quantum ratchets are Brownian motors in which the quantum dynamics of particles induces qualitatively new behavior. We review a series of experiments in which asymmetric semiconductor devices of sub-micron dimensions are used to study quantum ratchets for electrons. In rocked quantum-dot ratchets electron-wave interference is used to create a non-linear voltage response, leading to a ratchet effect. The direction of the net ratchet current in this type of device can be sensitively controlled by changing one of the following experimental variables: a small external magnetic field, the amplitude of the rocking force, or the Fermi energy. We also describe a tunneling ratchet in which the current direction depends on temperature. In our discussion of the tunneling ratchet we distinguish between three contributions to the non-linear current–voltage characteristics that lead to the ratchet effect: thermal excitation over energy barriers, tunneling through barriers, and wave reflection from barriers. Finally, we discuss the operation of adiabatically rocked tunneling ratchets as heat pumps. Received: 8 February 2002 / Accepted: 11 February 2002 / Published online: 22 April 2002     

Epitaxial growth and spectroscopic investigation of BaSO4:Mn6+ layers

We report on the first layer growth of a Mn⁶⁺-doped material. Large-size BaSO₄ substrates of 10×6×4 mm³ were grown from a LiCl solvent by the flux method. Flat surfaces of undoped BaSO₄ were then achieved by use of liquid-phase epitaxy (LPE) from a CsCl–KCl–NaCl solvent. Finally, BaSO₄:Mn⁶⁺ layers were grown by LPE with growth velocities of approximately 3 μm h^-1, at temperatures of 550–508 °C. Absorption, luminescence, luminescence-excitation and luminescence-decay measurements confirmed the incorporation of manganese solely in its hexavalent oxidation state. This material possesses potential as a near-infrared tunable laser with a wavelength range larger than Ti:sapphire. Received: 7 January 2002 / Revised version: 30 March 2002 / Published online: 8 August 2002     

Filling boron nitride nanotubes with metals

The authors’ endeavors over the last few years with respect to boron nitride (BN) nanotube metal filling are reviewed. Mo clusters of 1–2 nm in size and FeNi Invar alloy (Fe ∼60 at. %; Ni ∼40 at. %) or Co nanorods of 20–70 nm in diameter were embedded into BN nanotube channels via a newly developed two-stage process, in which multi-walled C nanotubes served as templates for the BN multi-walled nanotube synthesis. During cluster filling, low-surface-tension and melting-point Mo oxide first filled a C nanotube through the open tube ends, followed by fragmentation of this filling into discrete clusters via O₂ outflow and C→BN conversion within tubular shells at high temperature. During nanorod filling, C nanotubes containing FeNi or Co nanoparticles at the tube tips were first synthesized by plasma-assisted chemical vapor deposition on FeNi Invar alloy or Co substrates, respectively, and, then, the nanomaterial was heated to the melting points of the corresponding metals in a flow of B₂O₃ and N₂ gases. During this second stage, simultaneous filling of nanotubes with a FeNi or Co melt through capillarity and chemical modification of C tubular shells to form BN nanotubes occurred. The synthesized nanocomposites were analyzed by scanning and high-resolution transmission electron microscopy, electron diffraction, electron-energy-loss spectroscopy and energy-dispersive X-ray spectroscopy. The nanostructures are presumed to function as ‘nanocables’ having conducting metallic cores (FeNi, Co, Mo) and insulating nanotubular shields (BN) with the additional benefit of excellent environmental stability. Received: 10 October 2002 / Accepted: 25 October 2002 / Published online: 10 March 2003 RID="*" ID="*"Corresponding author. Fax: +81-298/51-6280, E-mail: golberg.dmitri@nims.go.jp     

Quantitative measurements of the CH radical in sooting diffusion flames at atmospheric pressure

The potential of Laser Induced Fluorescence detection of the CH radical using C–X (0–0) excitation is investigated in a sooting methane/air diffusion flame at atmospheric pressure. Fluorescence is detected using the very narrow (<0.4 nm) Q-branch of the C–X (0–0) band, which enables the measurement of CH in sooting flames without interference from PAH fluorescence and soot emissions. Absolute concentrations are obtained using Cavity Ring Down Spectroscopy. 1D CH profiles in the sooting zone are recorded using a CCD camera with an excellent signal-to-noise ratio. The C–X (0–0) excitation associated with Q-branch detection is shown to be three times more efficient than the B–X scheme. Received: 4 March 2002 / Revised version: 5 November 2002 / Published online: 5 May 2003 RID="*" ID="*"Corresponding author. Fax: +33-3/2033-6463, E-mail: eric.therssen@univ-lille1.fr     

Flexible ceramic–polymer composite films with temperature-insensitive and tunable dielectric permittivity

BaTiO₃–polymer composite layers have been produced by the spin-on technique (thickness 3–10 μm). The dielectric permittivity of the layers at room temperature can be tuned from 2.8 to approximately 33 by varying the ceramic filling from 0 to 60% by volume. The dielectric properties of the films are almost insensitive to temperature variations in the range 20–180 °C. Free-standing composite layers with ceramic content ≤50% are flexible without noticeable change of permittivity after repeated mechanical bending. Received: 22 November 2001 / Accepted: 24 November 2001 / Published online: 23 January 2002     

Femtosecond regenerative amplification in Cr:forsterite at 5–10 kHz

We developed a high-power oscillator–regenerative amplifier femtosecond laser system. Based on chromium-doped forsterite. The system is operating near 1.25 μm at a 5–10 kHz repetition rate. Chirped-pulse amplification produced 0.86 W (0.75 W) of average power, or 465 mW (400 mW) after compression at 5 kHz (10 kHz). Nearly bandwidth-limited pulses of duration 135 fs (shortest) and 150 fs (typical) are available with an energy of 93 μJ and 40 μJ at 5 and 10 kHz, respectively. Received: 7 June 2002 / Published online: 15 November 2002 RID="*" ID="*"Corresponding author. Fax: +49-30/63921289, E-mail: petrov@mbi-berlin.de     

High refractive index and transparent heavy metal oxide glassy thin films

Heavy metal oxide thin films of the ternary system Nb₂O₅–GeO₂–PbO have been prepared by pulsed laser deposition in an O₂ environment from either glassy or crystalline bulk samples. The range of ([Pb]+[Nb]) content in which the films are optically homogeneous and transparent is much broader (0.5–1.0) than that of the bulk samples considered in the present work (0.55–0.62). The imaginary part of the refractive index is very low in all cases (k<10^-3), whereas the real part increases linearly with the ([Pb]+[Nb]) content up to values as high as 2.35. The optical energy gap has been found to be strongly dependent on [Pb], whereas it is almost independent of [Nb]. This dependence is discussed in terms of the role of Pb and Nb as network modifiers or formers. Received: 5 August 2002 / Accepted: 8 August 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. Fax: +34-91/564-5557, E-mail: j.gonzalo@io.cfmac.csic.es     

Investigation of the interaction of evaporated aluminum with vapor deposited Teflon AF films via X-ray photoelectron spectroscopy

The interfacial bonding and mixing between evaporated aluminum and a vapor deposited Teflon AF (abbreviated to AF) film have been investigated with X-ray photoelectron spectroscopy. Graphite carbon (C–C), and aluminum carbide (Al–C), oxide (Al–O–C) and fluoride (Al–F) are formed when aluminum atoms are deposited on to the AF film. With increasing deposition of aluminum, the concentrations of these newly formed components increase gradually. Moreover, in situ annealing results in remarkable increases in the C–C, Al–C, Al–O–C and Al–F configurations and a decrease in metallic aluminum. No significant diffusion of aluminum into the AF film was observed during the annealing. The Al compounds form a layer at the Al/AF interface that acts as an adhesion promoter and diffusion barrier. Received: 21 October 2002 / Accepted: 22 October 2002 / Published online: 15 January 2003 RID="*" ID="*"Corresponding author. Fax: +49-431/880-6229, E-mail: sjding@yahoo.com     

Electrical switching studies on As<Subscript>40</Subscript>Te<Subscript>60-x</Subscript>Se<Subscript>x</Subscript> and As<Subscript>35</Subscript>Te<Subscript>65-x</Subscript>Se<Subscript>x</Subscript> glasses

The I–V characteristics of bulk As₄₀Te_60-xSe_x and As₃₅Te_65-xSe_x glasses have been studied with a current sweep of 0–18 mA-0, over a wide range of compositions (4≤x≤22). All the glasses studied showed a threshold electrical switching behaviour. The number of switching cycles withstood by the samples has been found to depend on the ON-state current. It is seen that the switching voltages increase with increase in selenium content. Further, the switching voltages are found to be almost independent of the thickness of the sample (d), in the range 0.18–0.3 mm. Also, the switching voltages and the number of switching cycles withstood by the samples are found to decrease with temperature. Received: 6 November 2002 / Accepted: 8 November 2002 / Published online: 29 January 2003 RID="*" ID="*"Corresponding author. Fax: +91-80/360-0135, E-mail: sasokan@isu.iisc.ernet.in     

Photoemission study of clean and c(4×2)-2CO-covered Pt (111) using high-harmonic radiation

An extreme ultraviolet (EUV) laser light source based on high-harmonic generation is presented. Coherent radiation in the photon energy range hν=20–120 eV is produced in the conversion media argon, neon and helium. High-harmonic radiation in the energy range 20–50 eV is applied to investigate photoemission spectra of Pt (111) and CO/Pt (111). In the photoemission spectra of the clean surface, new secondary electron emission structures are found which influence the cross section analysis of the CO states. When taking these Pt resonances into consideration, the 4σ and 5σ CO shape resonances are found at photon energies of 37 eV and 28 eV, respectively. Additionally, a resonance at hν=31 eV is also observed for the CO 1π state, in contrast to formerly published experimental data. Experimental and theoretical data suggest that this resonance is not connected to the well-known shape resonances in the σ-channel. Based on theoretical approaches, it is identified as an autoionization resonance. Received: 8 April 2002 / Accepted: 22 May 2002 / Published online: 22 November 2002 RID="*" ID="*"Corresponding author. Fax: +49-251/833-3604, E-mail: kutzner@uni-muenster.de     

Production of biologically inert Teflon thin layers on the surface of allergenic metal objects by pulsed laser deposition technology

Allergic-type diseases are current nowadays, and they are frequently caused by certain metals. We demonstrated that the metal objects can be covered by Teflon protective thin layers using a pulsed laser deposition procedure. An ArF excimer laser beam was focused onto the surface of pressed PTFE powder pellets; the applied fluences were 7.5–7.7 J/cm². Teflon films were deposited on fourteen-carat gold, silver and titanium plates. The number of ablating pulses was 10000. Post-annealing of the films was carried out in atmospheric air at oven temperatures between 320 and 500 °C. The thickness of the thin layers was around 5 μm. The prepared films were granular without heat treatment or after annealing at a temperature below 340 °C. At 360 °C a crystalline, contiguous, smooth, very compact and pinhole-free thin layer was produced; a melted and re-solidified morphology was observed above 420 °C. The adhesion strength between the Teflon films and the metal substrates was determined. This could exceed 1–4 MPa depending on the treatment temperature. It was proved that the prepared Teflon layers can be suitable for prevention of contact between the human body and allergen metals and so for avoidance of metal allergy. Received: 12 June 2002 / Accepted: 13 June 2002 / Published online: 4 November 2002 RID="*" ID="*"Corresponding author. E-mail: bhopp@physx.u-szeged.hu     

Absolute absorber quantification in turbid media at small source–detector separations

The aim of our studies was to develop a method to determine the absorption coefficient of a turbid medium in a reflection geometry with small source–detector separations. Therefore, the time-integrated microscopic Beer–Lambert law (MBL) was modified in order to obtain the absolute absorption coefficient from mean time of flight and dc-intensity measurements. The new technique was evaluated using turbid phantoms having varying scattering (μ_s ^′ between 0.2 and 2.2 mm^-1) and absorbing properties (μ_a between 0.04 and 0.14 mm^-1), comparable to many biological tissues at various source–detector separations between 3 and 11 mm. The measurements were performed at a wavelength of 1064 nm. We found that this new method was able to determine the absolute absorption coefficient of the selected phantoms with a standard error of less than 0.005 mm^-1 over the range of optical properties investigated. Received: 23 November 2001 / Revised version: 28 February 2002 / Published online: 14 May 2002