Preparation of highly porous carbon from fir wood by KOH etching and CO2 gasification for adsorption of dyes and phenols from water

Fir wood was first carbonized for 1.5 h at 450 degrees C, then soaked in a KOH solution KOH/char ratio of 1, and last activated for 1 h at 780 degrees C. During the last hour CO2 was poured in for further activation for 0, 15, 30, and 60 min, respectively. Carbonaceous adsorbents with controllable surface area and pore structure were chemically activated from carbonized fir wood (i.e., char) by KOH etching and CO2 gasification. The pore properties, including the BET surface area, pore volume, pore size distribution, and pore diameter, of these activated carbons were first characterized by the t-plot method based on N2 adsorption isotherms. Fir-wood carbon activated with CO2 gasification from 0 to 60 min exhibited a BET surface area ranging from 1371 to 2821 m2 g(-1), with a pore volume significantly increased from 0.81 to 1.73 m2 g(-1). Scanning electron microscopic (SEM) results showed that the surfaces of honeycombed holes in these carbons were significantly different from those of carbons without CO2 gasification. The adsorption of methylene blue, basic brown 1, acid blue 74, p-nitrophenol, p-chlorophenol, p-cresol, and phenol from water on all the carbons studied was examined to check their chemical characteristics. Adsorption kinetics was in agreement with the Elovich equation, and all equilibrium isotherms were in agreement with the Langmuir equation. These results were used to compare the Elovich parameter (1/b) and the adsorption quantity of the unit area (q(mon)/Sp) of activated carbons with different CO2 gasification durations. This work facilitated the preparation of activated carbon by effectively controlling pore structures and the adsorption performance of the activated carbon on adsorbates of different molecular forms.     

Pore structure and adsorption performance of the KOH-activated carbons prepared from corncob

Carbonaceous adsorbents with controllable surface area were chemically activated with KOH at 780 degrees C from chars that were carbonized from corncobs at 450 degrees C. The pore properties, including BET surface area, pore volume, pore size distribution, and mean pore diameter of these activated carbons, were characterized by the t-plot method based on N(2) adsorption isotherms. Two groups are classified according to the types of adsorption/desorption isotherms. Group I corncob-derived activated carbons, with KOH/char ratios from 0.5 to 2, exhibited BET surface area ranging from 841 to 1221 m(2)/g. Group II corncob-derived activated carbons, with KOH/char rations from 3 to 6, showed high BET surface areas, from 1976 to 2595 m(2)/g. From scanning electron microscopic (SEM) results, the surface morphology of honeycombed holes on corncob-derived activated carbons was significantly influenced by the KOH/char ratios. The adsorption kinetics of methylene blue, basic brown 1, acid blue 74, 2,4-dichlorophenol, 4-chlorophenol, and phenol from water at 30 degrees C were studied on the two groups of activated carbons, which were suitably described by two simplified kinetic models, pseudo-first-order and pseudo-second-order equations. The effective particle diffusivities of phenols and dyes at the corncob-derived activated carbons of group II are higher than those of ordinary activated carbons. The high-surface-area activated carbons were demonstrated to be promising adsorbents for pollution control and for other applications.     

Study of Microstructure of High-Surface-Area Polyacrylonitrile Activated Carbon Fibers

High-surface-area polyacrylonitrile (PAN) activated carbon fibers having different pore size distribution activated by KOH were investigated. Nitrogen adsorption, XRD, SEM, and TEM were used to characterize the microstructure of PAN-ACFs. The specific surface area of samples was calculated from the standard BET method, and micropore surface area and volume were obtained from the Horvath-Kawazoe equations. The average pore size and characteristic energy were calculated by the Dubinin-Radushkevich equation according to the multistage adsorption mechanism. The whole pore size distribution was calculated by employing the regularization method according to the density functional theory, which is based on a molecular model for the adsorption of nitrogen in porous solids. It was shown that the isotherms were type I, the pore size was around 0.4-0.8 nm, and the mesorpore size was around 2-4 nm. The XRD pattern showed that PAN-ACFs activated by KOH are of amorphous material composed of very small crystallites. The SEM and TEM results showed that the monograph differs with differing activation degree, and the network is uniform or disordered. That all of these methods are in good agreement with one another. Copyright 2001 Academic Press.     

A study on pore-opening behaviors of graphite nanofibers by a chemical activation process

In this work, porous graphite nanofibers (GNFs) were prepared by a KOH activation method in order to manufacture porous carbon nanofibers. The process was conducted in the activation temperature range of 900-1100 degrees C, and the KOH:GNFs ratio was fixed at 3.5:1. The textural properties of the porous carbons were analyzed using N2 adsorption isotherms at 77 K. The BET, D-R, and BJH equations were used to observe the specific surface areas and the micro- and mesopore structures, respectively. From the results, it was found that the textural properties, including the specific surface area and the pore volumes, were proportionally enhanced with increasing activation temperatures. However, the activation mechanisms showed quite significant differences between the samples activated at low and high temperatures.     

Effects of Cetylpyridinium Chloride on Phase and Rheological Behavior of the Diluted C(12)E(4)/Benzyl Alcohol/Water System

The influence of the pore size distribution of activated carbon on the adsorption of phenol from aqueous solutions was explored. Activated carbons with different porous structures were prepared by gasifying a bituminous coal char to different extents of burn-off. The results of adsorption experiments show that the phenol capacity of these carbons does not proportionally increase with their BET surface area. This reflects the heterogeneity of the carbon surface for adsorption. The pore size distributions of these carbons, determined according to the Dubinin-Stoeckli equation, were found to vary with the burn-off level. By incorporating the distribution with the Dubinin-Radushkevich equation using an inverse proportionality between the micropore size and the adsorption energy, the isotherms for the adsorption of phenol onto these carbons can be well predicted. The present study has demonstrated that the heterogeneity of carbon surface for the phenol adsorption can be attributed to the different energies required for adsorption in different-size micropores. Copyright 2000 Academic Press.     

Porous properties of activated carbons from waste newspaper prepared by chemical and physical activation

Activated carbons were prepared from old newspaper and paper prepared from simulated paper sludge by chemical activation using various alkali carbonates and hydroxides as activating reagents and also by physical activation using steam. In the chemical activation, the influence of oxidation, carbonization, and activation on the porous properties of the resulting activated carbons was investigated. The specific surface areas (S(BET)) of the activated carbons prepared by single-step activation (direct activation without oxidation and carbonization) were higher than those resulting from two-step activation (oxidation-activation and carbonization-activation) and three-step activation (oxidation-carbonization-activation) methods. The S(BET) values were strongly dependent on the activating reagents and the activating conditions, being >1000 m(2)/g using K(2)CO(3), Rb(2)CO(3), Cs(2)CO(3), and KOH as activating reagents but <1000 m(2)/g using Li(2)CO(3), Na(2)CO(3), and NaOH. These differences in S(BET) values are suggested to be related to the ionic radii of the alkalis used as activating reagents. The microstructures of the higher S(BET) samples show a complete loss of fiber shape but those of the lower S(BET) samples maintain the shape. In the physical activation, the porous properties of the activated carbons prepared by the single-step method were examined as a function of the production conditions such as activation temperature, activation time, steam concentration, and flow rate of the carrier gas. The maximum S(BET) and total pore volume (V(P)) were 1086 m(2)/g and 1.01 ml/g, obtained by activation at 850 degrees C for 2 h, flowing 20 mol% of steam in nitrogen gas at 0.5 l/min. A correlation was found between S(BET) and the yield of the product, the maximum S(BET) value corresponding to a product yield of about 10%. This result is suggested to result from competition between pore formation and surface erosion. Compared with chemically activated carbons using K(2)CO(3), the porous properties of the physically activated carbons have lower S(BET) and V(P) values because of the smaller size and lower volume of their micropores. On the other hand, they retain the original fiber shape and the paper sheet morphology after activation.     

Surface morphology of nanostructured polymer-based activated carbons

Complementary techniques, including nitrogen adsorption, small-angle X-ray scattering (SAXS), and atomic force microscopy (AFM), have been utilized to characterize the surface features of highly microporous carbon materials prepared from highly aromatic polymers. Nitrogen adsorption measurement interpreted by BET, DR, HK, and NLDFT methods reveals these nanostructured activated carbons exhibit a high surface area of up to 4000 m2/g, a micropore volume up to approximately 1.75 mL/g, and an average pore size of approximately 10-20 angstroms. A modified equation, based on Porod's law, the Debye-Bueche equation, and fractal dimension theories, has been proposed and successfully applied to analyze the SAXS spectra and to extract the porous texture of these unique activated carbons. AFM 3D imaging combined with the Fourier transform technique has been applied to statistically quantify pore sizes on the carbon surface.     

KOH activation and characterization of glass fibers-supported phenolic resin

In this work, glass-fiber-supported activated carbons (GFACs) were prepared by KOH activation using phenolic resin. Two different preparation methods were chosen: (a) filling and (b) impregnation methods. The structural properties of the GFACs studied were characterized by using N2 adsorption isotherms at 77 K and transformed models, such as the DR equation and the alphas-plot. A scanning electron microscope (SEM) was also used to investigate the external pore structure of the resulting carbons. The specific surface areas and pore volumes for both methods increased with increasing content of KOH. However, the pore evolution for the filling method was superior to that for the impregnation method. DR plots for all samples showed a good linearity at low relative pressure. Also, all samples displayed a slight upward deviation at the linear portion of the alphas-plots, indicating the presence of mesopores and external surface area. SEM studies showed that GFACs possessed a well-developed pore structure and exhibited a change in the pore evolution according to the preparation conditions.     

Characterization of Microporous Activated Carbon Electrodes for Electric Double-layer Capacitors

IntroductionElectric double layer capacitors( EDLCs) witha high power density can be used as memory back-up devices or electric vehicles.EDLCs store energyin the electric double layer by charge accumulationon the interface between the electrode and the elec-trolyte. In order to obtain reasonable energies andpower densities,the more suitable material forEDLCs musthave a high surface area with a signif-icant value of specific double layer capacitance,better pore size distribution and electro…     

Adsorption characteristics of activated carbons obtained from corncobs

Dried, crushed, corncobs were carbonized at 500°C and steam activated (in one- or two-step schemes), or activated with H₃PO₄. The products were characterized by N₂ adsorption at 77 K, using the BET, _s and DR methods. Adsorption capacity was demonstrated by the iodine and phenol numbers, and the isotherms of methylene blue and Pb²⁺ ions, from aqueous solutions. A distribution of porosity in the carbons was estimated within the various ranges (ultra-, super-, meso- and macropores). Simple carbonization yields a poor adsorbing carbon; only its uptake for iodine was high and proposed to be due to an addition reaction on residual unsaturation of the parent lignocellulosic structures. Enhanced porosity was best associated with chemical activation and/or steam pyrolysis at 700°C. These activated carbons proved highly porous and rich in mesopores, and showed high adsorption capacity for methylene blue and Pb²⁺ ions. Phenol uptake was found to depend on surface chemical nature of the carbon rather than its porous properties. Corncobs were postulated to be feasible as feedstock to produce good adsorbing carbons, under the one-step activation schemes outlined here.     

Effects of Burn-off and Activation Temperature on Preparation of Activated Carbon from Corn Cob Agrowaste by CO(2) and Steam

Previous studies have successfully demonstrated that corn cob is a suitable precursor for production of good activated carbon by chemical activation. However, respond to the need for cleaner production, this study focuses on the physical activation by gasifying agents such as CO(2) and steam. The activation temperatures under investigation are 1073 and 1173 K. Within the limit of 50 wt% burn-off, experimental results reveal that the BET surface area, pore volume, and average pore diameter of the resulting activated carbon generally increase with the extent of burn-off in both gasifying agents and at both temperatures. The higher activation temperature can overcome the drawbacks of a longer period of activation required to attain larger surface area and can offer higher potential to produce activated carbon of greater adsorption capacity from agriculture wastes such as corn cobs. Additionally, the BET surface areas of properly prepared activated carbons can satisfy commercial requirements, when compared with commercial activated carbon. The BET surface areas of the activated carbons after about 71 and 59 wt% burn-off of CO(2) and steam activations at 1173 K are 1705 and 1315 m(2)/g, respectively, indicating high adsorption capacities. Thus, it is feasible to produce high-quality microporous activated carbon from corn cob agrowaste using N(2) carbonization followed by physical activation with CO(2) or steam. Copyright 2000 Academic Press.     

Preparation and structural characterization of activated carbons based on polymeric resin

In this work, activated carbons (ACs) with high porosity were synthesized from polystyrene-based cation-exchangeable resin (PSI) by chemical activation with KOH as the activating agent. And the influence of the KOH-to-PSI ratio on the porosity of the ACs studied was investigated by using nitrogen adsorption isotherms at 77 K and a scanning electron microscope (SEM). As a result, PSI could be successfully converted into ACs with well-developed micro- and mesopores. The specific surface area and pore volumes increased with an increase in the KOH-to-PSI ratio. However, it was found that the addition of KOH did lead to the transformation of the micropores to the meso- and macropores. From the results of pore size analysis, quite different pore size distributions were observed, resulting from the formation of new pores and the widening of the existing micropores during KOH activation. A SEM study showed that the resulting carbons possessed a well-developed pore structure and the pore size of the ACs studied increased with the KOH-to-PSI ratio.     

Mesoporous activated carbon from <Emphasis Type="Italic">Pentace</Emphasis> species sawdust via microwave-induced KOH activation: optimization and methylene blue adsorption

This work studied the optimization of preparation conditions of Pentace species sawdust activated carbon (PSAC) via microwave-induced KOH activation for the adsorption of methylene blue (MB) dye from aqueous solutions. The produced activated carbon was characterised through Brunauer–Emmett–Teller (BET) surface area and pore structural analysis, proximate and ultimate, scanning electron microscopy, and Fourier transform infrared spectroscopy. Response surface methodology technique was used to optimize the radiation power, radiation time and impregnation ratio for MB removal and PSAC yield through central composite design. The optimum preparation conditions for PSAC were obtained at a radiation power of 418 W, radiation time of 6.4 min, and an impregnation ratio of 0.5, which resulted in 27% PSAC yield and 93.74% MB removal. A mesoporous structure of PSAC was formed, with a BET surface area, total pore volume and average pore diameter of 914.15 m²/g, 0.52 cm³/g, and 3.19 nm, respectively. The experimental kinetic data were well described by a pseudo-second-order model and intraparticle diffusion. Adsorption data fitted the Redlich–Peterson equation better than the Langmuir, Freundlich, Temkin, Dubinin–Radushkevich and Sips equations. However, the exponential value of Redlich–Peterson approached unity, hence, resulting in the original Langmuir equation, with adsorption capacity of 357.14 mg/g. The adsorption performance was effectively preserved even after four consecutive cycles, demonstrating good regeneration ability.     

Adsorption Behaviors of CO2 and NH3 on Chemically Surface-Treated Activated Carbons

The adsorption characteristics of activated carbon treated with 30 wt% HCl and 30 wt% NaOH were investigated. The acid and base values were determined by Boehm's method and the surface structures were studied by the BET method with N2 adsorption and iodine adsorption capacity. Also the adsorption properties of the activated carbons treated with acid and base chemical solutions were investigated with CO2 and NH3 adsorptions. Different adsorption behaviors of CO2 and NH3 on the modified activated carbons were observed, even though the physical surfaces of the activated carbons (i.e., specific surface area, pore size, and pore volume) were not significantly changed. Copyright 1999 Academic Press.     

CO2 adsorption by activated templated carbons

Highly porous carbons have been prepared by the chemical activation of two mesoporous carbons obtained by using hexagonal- (SBA-15) and cubic (KIT-6)-ordered mesostructured silica as hard templates. These materials were investigated as sorbents for CO(2) capture. The activation process was carried out with KOH at different temperatures in the 600-800°C range. Textural characterization of these activated carbons shows that they have a dual porosity made up of mesopores derived from the templated carbons and micropores generated during the chemical activation step. As a result of the activation process, there is an increase in the surface area and pore volume from 1020 m(2)g(-1) and 0.91 cm(3)g(-1) for the CMK-8 carbon to a maximum of 2660 m(2)g(-1) and 1.38 cm(3)g(-1) for a sample activated at 800°C (KOH/CMK-8 mass ratio of 4). Irrespective of the type of templated carbon used as precursor or the operational conditions used for the synthesis, the activated samples exhibit similar CO(2) uptake capacities, of around 3.2 mmol CO(2)g(-1) at 25°C. The CO(2) capture capacity seems to depend on the presence of narrow micropores (<1 nm) rather than on the surface area or pore volume of activated carbons. Furthermore, it was found that these porous carbons exhibit a high CO(2) adsorption rate, a good selectivity for CO(2)-N(2) separation and they can be easily regenerated.     

Thermal properties of pitch-polymer compositions and derived activated carbons

The evaluation of the possibilities to use coal-tar pitch modified with waste poly(ethylene terephthalate) or phenol?Cformaldehyde resin for the preparation of activated carbons was carried out. The measurement of thermal analysis (DSC), softening point, coking value, content of components insoluble in toluene and quinoline of pitch-polymer compositions were carried out. Coal-tar pitch and pitch-polymer compositions were carbonized and activated with steam at 800?°C to 50?% burn-off. For the obtained activated carbons the determination of thermal analysis (DSC), BET surface area on the basis of volumetric low-temperature adsorption of nitrogen, mesopore, and micropore volume from benzene adsorption/desorption isotherms (gravimetric McBain-Bakr method) were carried out.     

Synthesis,characterization, and KOH activation of nanoporous carbon for increasing CO2 adsorption capacity

Ordered nanoporous carbons (ONCs) were prepared using a soft-templating method. To improve the CO₂ adsorption efficiency, ONCs were chemically activated to obtain high specific surface area and micro-/mesopore volume with different KOH amounts (i.e., 0, 1, 2, 3, and 4) as an activating agent. The prepared nanoporous carbons (NCs) materials were analyzed by low-angle X-ray diffraction for confirmation of synthesized ONCs structures. The structural properties of the NCs materials were analyzed by high-angle X-ray diffraction. The textural properties of the NCs materials were examined using the N₂/77 K adsorption isotherms according to the Brunauer–Emmett–Teller equation. The CO₂ adsorption capacity was measured by CO₂ isothermal adsorption at 298 K/1 bar. From the results, the NCs activated with KOH showed that the increasing specific surface areas and total pore volumes resulted in the enhancement of CO₂ adsorption capacity.     

Preparation and characterization of activated carbons from Sterculia alata nutshell by chemical activation with zinc chloride to remove phenol from wastewater

Nutshells of Sterculia alata, a forest waste, were used to prepare activated carbons by zinc chloride activation under four different activation atmospheres, to develop carbons with substantial capability, and to adsorb phenol from wastewater. Experiments were carried out at different chemical ratios (activating agent/precursor). Effect of carbonization temperature and time are the important variables, which had significant effect on the pore structure of carbon. Developed activated carbon was characterized by SEM analysis. Pore volume and surface area were estimated by Hg porosimetry and BET surface area analyses. The carbons showed surface area and micropore volumes of around 712 m²/g and 0.542 cm³/g, respectively. The activated carbon developed shows substantial capability to adsorb phenol from wastewater. The kinetic data were fitted to the models of intraparticle diffusion, pseudo-second order, and Lagergren model and followed more closely the pseudo-second-order chemisorption model. The isotherm equilibrium data were well-fitted by the Langmuir and Freundlich models. The maximum uptake of phenol was found at pH 3.5.     

Mesopore control of high surface area NaOH-activated carbon

Activated carbon with BET surface areas in a narrow range from 2318 to 2474 m2/g was made by soaking the char made from corncob in a concentrated NaOH solution at NaOH/char ratios from 3 to 6; the mesopore volumes of the activated carbon were significantly changed from 21 to 58%. The relationships between pore properties (Sp, Vpore, Vmicro/Vpore, Dp) and NaOH dosage were investigated. Comparisons between the methods of NaOH and KOH activation revealed that NaOH activation can suitably control the mesopore specific volume of the activated carbon. Elemental analysis revealed that the H/C and O/C values of the activated carbons of NaOH/char ratios from 3 to 6 were significantly lower. SEM observation of surface hole variation of the activated carbon ascertained that the reaction process was inner pore etching. Based on the above three measurements and experimental investigations, the assumption made by previous researchers, namely that NaOH and KOH produce similar results, was challenged. Furthermore, the adsorption kinetics was used to investigate the adsorption rate of an Elovich equation to determine the relationships between the adsorption behavior on larger molecules (dyes) and smaller molecules (phenols) and the pore structure of the activated carbon.     

Modeling adsorption rate of organic micropollutants present in landfill leachates onto granular activated carbon

The overall adsorption rate of single micropollutants present in landfill leachates such as phthalic acid (PA), bisphenol A (BPA), diphenolic acid (DPA), 2,4-dichlorophenoxy-acetic acid (2,4-D), and 4-chloro-2-methylphenoxyacetic acid (MCPA) on two commercial activated carbons was studied. The experimental data obtained were interpreted by using a diffusional model (PVSDM) that considers external mass transport, intraparticle diffusion, and adsorption on an active site. Furthermore, the concentration decay data were interpreted by using kinetics models. Results revealed that PVSDM model satisfactorily fitted the experimental data of adsorption rate on activated carbon. The tortuosity factor of the activated carbons used ranged from 2 to 4. The contribution of pore volume diffusion represented more than 92% of intraparticle diffusion confirming that pore volume diffusion is the controlling mechanism of the overall rate of adsorption and surface diffusion can be neglected. The experimental data were satisfactorily fitted the kinetic models. The second-order kinetic model was better fitted the experimental adsorption data than the first-order model.