Gas-Sensing Property of TM-MoTe2 Monolayer towards SO2, SOF2, and HF Gases

Detecting the characteristic decomposition products (SO₂, SOF₂, and HF) of SF₆ is an effective way to diagnose the electric discharge in SF₆-insulated equipment. Based on first-principles calculations, Au, Ag, and Cu were chosen as the surface modification transition metal to improve the adsorption and gas-sensing properties of MoTe₂ monolayer towards SO₂, SOF₂, and HF gases. The results show that Au, Ag, and Cu atoms tend to be trapped by T_H sites on the MoTe₂ monolayer, and the binding strength increases in the order of Ag < Au < Cu. In gas adsorption, the moderate adsorption energy provides the basis that the TM-MoTe₂ monolayer can be used as gas-sensing material for SO₂, SOF₂, and HF. The conductivity of the adsorption system changes significantly. The conductivity decreases upon gases adsorption on TM-MoTe₂ monolayer, except the conductivity of Ag-MoTe₂ monolayer increases after interacting with SOF₂ gas.     

Monolayer oxide catalysts from alkoxide precursors, part IV. Vanadia, titania and stibia on SiO2, SnO2, and TiO2 in 2-propanol oxidation

Vanadia monolayer catalysts supported on SnO₂, ZrO₂, TiO₂, and SiO₂, similarly as titania and stibia monolayers deposited on SiO₂, have been synthesized by reacting the corresponding metal alkoxides with hydroxyls on the carrier surfaces. The metal ions loads in monolayer systems were determined. The catalysts activity was tested in 2-propanol transformations. The nature of carrier has a strong influence on the dehydrating to dehydrogenating activity ratio of vanadia monolayer.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Synthesis, structural characterization and optical properties of a new cesium aluminum borate, Cs2Al2B2O7

A new borate, Cs₂Al₂B₂O₇, was synthesized by solid-state reaction. It crystallizes in the monoclinic space group P2₁/c with a=6.719(1) Å, b=7.121(1) Å, c=9.626(3) Å, β=115.3(1)°, and Z=2. In the structure, two AlO₄ tetrahedra and two BO₃ planar triangles are connected alternately by corner-sharing to from nearly planar [Al₂B₂O₁₀] rings, which are further linked via common O1 atom to generate layers in the bc plane. These layers then share the O3 atoms lying on a center of inversion to form a three-dimensional framework with Cs atoms residing in the channels. The IR spectrum confirms the presence of both BO₃ and AlO₄ groups and the UV-vis-IR diffuse reflectance spectrum indicates a band gap of about 4.13(2) eV.     

Synthesis and properties of the double perovskites La2NiVO6, La2CoVO6, and La2CoTiO6

The double perovskites La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, are described. Rietveld fitting of neutron and powder X-ray diffraction data show La₂NiVO₆ and La₂CoVO₆ to have a disordered arrangement of B-cations whereas La₂CoTiO₆ shows ordering of the B-cations (with ∼5% Co/Ti inversion). Curie-Weiss fits to the linear region of the 1/χ plots reveal Weiss temperatures of −107, −34.8, and 16.3 K for La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, respectively, and magnetic transitions are observed. La₂CoTiO₆ prepared by our method differs from material prepared by lower-temperature routes. A simple antiferromagnetic spin model is consistent with the data for La₂CoTiO₆. These compounds are semiconductors with bandgaps of 0.41 (La₂CoVO₆), 1.02 (La₂CoTiO₆) and 0.45 eV (La₂NiVO₆).     

Theoretical study on H2 elimination pathways of silylenoid H2SiLiF with CH4, NH3, H2O, HF, SiH4, PH3, H2S, and HCl

Ab initio molecular orbital calculations have been performed to explore the reaction potential energy surfaces of silylenoid H₂SiLiF with XH _n hydrides, where XH _n = CH₄, NH₃, H₂O, HF, SiH₄, PH₃, H₂S, and HCl. We have identified a previously unreported reaction pathway on each reaction surface, H₂SiLiF + H-XH _{n − 1} → H _n XSiLiF + H₂, which involves H₂ elimination following the initial formation of an association complex via a four-membered ring transition state to form the substituted three-membered ring silylenoid H _n XSiLiF and a H₂ molecule. This theoretical calculations suggest that (i) for H₂ eliminations there is a very clear trend toward lower activation barriers and more exothermic interactions on going from left to right along a given row in periodic table, and (ii) for the second-row hydrides, the H₂ elimination reactions are less exothermic than for the first-row hydrides and the reaction barriers are lower for X–S and Cl. Compared to the insertions of H₂SiLiF into XH _n , the H₂ elimination pathways should be unfavorable with higher barrier and lower exothermic.     

Crystal growth, structure determination, and optical properties of new potassium-rare-earth silicates K3RESi2O7 (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu)

Single crystals of K₃RESi₂O₇ (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) were grown from a potassium fluoride flux. Two different structure types were found for this series. Silicates containing the larger rare earths, RE=Gd, Tb, Dy, Ho, Er, Tm, Yb crystallize in a structure K₃RESi₂O₇ that contains the rare-earth cation in both a slightly distorted octahedral and an ideal trigonal prismatic coordination environment, while in K₃LuSi₂O₇, containing the smallest of the rare earths, lutetium is found solely in an octahedral coordination environment. The structure of K₃LuSi₂O₇ crystallizes in space group P6₃/mmc with a=5.71160(10) Å and c=13.8883(6) Å. The structures containing the remaining rare earths crystallize in the space group P6₃/mcm with the lattice parameters of a=9.9359(2) Å, c=14.4295(4) Å, (K₃GdSi₂O₇); a=9.88730(10) Å, c=14.3856(3) Å, (K₃TbSi₂O₇); a=9.8673(2) Å, c=14.3572(4) Å, (K₃DySi₂O₇); a=9.8408(3) Å, c=14.3206(6) Å, (K₃HoSi₂O₇); a=9.82120(10) Å, c=14.2986(2) Å, (K₃ErSi₂O₇); a=9.80200(10) Å, c=14.2863(4) Å, (K₃TmSi₂O₇); a=9.78190(10) Å, c=14.2401(3) Å, (K₃YbSi₂O₇). The optical properties of the silicates were investigated and K₃TbSi₂O₇ was found to fluoresce in the visible.     

Phase relations, crystal chemistry, and dielectric properties in sections of the La2O3-CaO-MgO-TiO2 system

Subsolidus phase equilibria and crystal chemistry were studied for the La₂O₃-MgO-TiO₂ system and for the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃ in the quaternary La₂O₃-CaO-MgO-TiO₂ system. Dielectric properties (relative permittivity and temperature coefficient of resonant frequency, τ_f) were measured at 5-10 GHz and mapped onto the phase equilibria relations to reveal the compositions of temperature-stable (τ_f=0) compounds and mixtures. Phase equilibria relations were obtained by X-ray powder diffraction analysis of approximately 80 specimens prepared by solid-state reactions in air at ∼1450°C. Six ternary phases were found to form in the La₂O₃-MgO-TiO₂ system, including the three previously reported compounds LaMg_1/2Ti_1/2O₃, La₅Mg_0.5Ti_3.5O₁₅, and “La₆MgTi₄O₁₈”; and the new phases La₁₀MgTi₉O₃₄, La₉Mg_0.5Ti_8.5O₃₁, and a perovskite-type solid solution (1−x)LaMg_1/2Ti_1/2O₃-xLa_2/3TiO₃ (0?x?0.5). The phase previously reported as “La₆MgTi₄O₁₈” was found to form off-composition, apparently as a point compound, at La₆Mg_0.913Ti_4.04O₁₈. Indexed experimental X-ray powder diffraction patterns are given for LaMg_1/2Ti_1/2O₃, La₅Mg_0.5Ti_3.5O₁₅, La₆Mg_0.913Ti_4.04O₁₈, La₁₀MgTi₉O₃₄, and La₉Mg_0.5Ti_8.5O₃₁. LaMg_1/2Ti_1/2O₃ exhibits a slightly distorted perovskite structure with ordered B-cations (P2₁/n; a=5.5608(2) Å, b=5.5749(3) Å, c=7.8610(5) Å, β=90.034(4)°). La₅Mg_0.5Ti_3.5O₁₅ (Pm1; a=5.5639(1), c=10.9928(5) Å) and La₆Mg_0.913Ti_4.04O₁₈ (R3m; a=5.5665(1), c=39.7354(9) Å) are n=5 and n=6 members, respectively, of the (111) perovskite-slab series A_nB_n−1O_3n. The new phases La₁₀MgTi₉O₃₄ (a=5.5411(2), b=31.3039(9), c=3.9167(1) Å) and La₉Mg_0.5Ti_8.5O₃₁ (a=5.5431(2), b=57.055(1), c=3.9123(1) Å) are n=5 and n=4.5 members, respectively, of the (110) perovskite-slab series A_nB_nO_3n+2, which exhibit orthorhombic subcells; electron diffraction revealed monoclinic superlattices with doubled c-parameters for both compounds. Extensive perovskite-type solid solutions form in the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃. The La₂O₃-MgO-TiO₂ system contains two regions of temperature-stable (τ_f=0) compositions. The quaternary La₂O₃-CaO-MgO-TiO₂ system contains an extensive single-phase perovskite-type volume through which passes a surface of temperature-stable compositions with permittivities projected to be in the 40-50 range. Traces of this surface occur as lines of τ_f=0 perovskite-type phases in the ternary sections LaMg_1/2Ti_1/2O₃-CaTiO₃-La₂O₃ and LaMg_1/2Ti_1/2O₃-CaTiO₃-La_0.833Mg_0.25Ti_0.75O₃.     

A novel germanate, Cu2Fe2Ge4O13, with a four tetrahedra oligomer

The structure of Cu₂Fe₂Ge₄O₁₃, previously thought to be CuFeGe₂O₆, has been determined from single-crystal X-ray diffraction data to be monoclinic, P2₁/m, a=12.1050(6), b=8.5073(4), c=4.8736(2) Å, β=96.145(1)°, Z=2, with R1=0.0231 and wR2=0.0605. The unique structure has an oligomer of four germanate tetrahedra, cross-linked laterally by square-planar copper ions, joined end-to-end by a zigzag chain of edge-sharing iron oxide octahedra. Running along the a-direction the metal oxide chain consists of alternating Cu-Cu and Fe-Fe dimers. A hypothetical series of homologous structures (Cu_n−2Fe₂Ge_nO_3n+1 with n=3,4,…,∞) with different length germanate oligomers is proposed, where as n increases, the infinite chain of the CuGeO₃ is approached. In this context, Cu₂Fe₂Ge₄O₁₃ is viewed as being built from blocks of CuGeO₃ and the Fe oxide chains. This material has significance to the study of low-dimensional mixed-spin systems.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

Synthesis,characterization and luminescence of the tetranuclear gold cluster: [Au4{7,8-(PPh2)2-7,8-C2B9H10}2(PPh3)2]

A tetranuclear gold cluster has been synthesized by the reaction of [Au(PPh₃)NO₃] with the closo carborane diphosphine 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ in THF, and characterized by elemental analysis, FT-IR, ¹H and ¹³C?NMR spectroscopy and X-ray structure determination. The cluster crystallizes in the triclinic Pī, a?=?15.118(8)?Å, b?=?16.057(9)?Å, c?=?24.284(13)?Å, α?=?80.822(9)°, β?=?79.624(8)°, γ?=?81.938(8)°, Z?=?2, R ₁?=?0.0626, wR ₂?=?0.1894. A single crystal structure determination showed that four gold atoms form a tetrahedral framework. Among these four gold atoms, two were chelated by two nido carborane diphosphine [7,8-(PPh₂)₂-7,8-C₂B₉H₁₀]^? anions coming from the degradation of the initial closo ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀, while the other two were ligated to two PPh₃ groups. The luminescence of this cluster was also investigated in dichloromethane solution at room temperature.     

The importance of valencep functions in the bonding of Na2, K2, and Cu2 and their positive and negative ions

Summary The relative importance of the valencep functions for describing the bonding in the valence isoelectronic Na₂, K₂, and Cu₂ molecules and their positive and negative ions is investigated. In absolute magnitude the contribution of thep functions to the dissociation energy follows the trend Cu>Na>K while by percentage of the dissociation energy the importance of thep functions follows the polarizabilities, i.e. K>Na>Cu. The bonding in K₂, K ₂ ⁺ , and K ₂ ^– is analyzed to explain the observed trends.Dedicated to Prof. Klaus Ruedenberg     

Gram-Scale Synthesis of an Ultrastable Microporous Metal-Organic Framework for Efficient Adsorptive Separation of C2H2/CO2 and C2H2/CH4

A highly water and thermally stable metal-organic framework (MOF) Zn₂(Pydc)(Ata)₂ (1, H₂Pydc = 3,5-pyridinedicarboxylic acid; HAta = 3-amino-1,2,4-triazole) was synthesized on a large scale using inexpensive commercially available ligands for efficient separation of C₂H₂ from CH₄ and CO₂. Compound 1 could take up 47.2 mL/g of C₂H₂ under ambient conditions but only 33.0 mL/g of CO₂ and 19.1 mL/g of CH₄. The calculated ideal absorbed solution theory (IAST) selectivities for equimolar C₂H₂/CO₂ and C₂H₂/CH₄ were 5.1 and 21.5, respectively, comparable to those many popular MOFs. The Q_st values for C₂H₂, CO₂, and CH₄ at a near-zero loading in 1 were 43.1, 32.1, and 22.5 kJ mol⁻¹, respectively. The practical separation performance for C₂H₂/CO₂ mixtures was further confirmed by column breakthrough experiments.     

PbCu3(OH)(NO3)(SeO3)3·1/2H2O und Pb2Cu3O2(NO3)2(SeO3)2: Synthese und Kristallstrukturuntersuchung

Crystals of PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O [a=7.761(3)Å,b=9.478(4)Å,c=9.514(4)Å, =66.94(2)°, =69.83(2)°, =81.83(2)°, space group P ,Z=2] and Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ [a=5.884(2)Å,b=12.186(3)Å,c=19.371(4)Å, space group Cmc2₁,Z=4] were synthesized under hydrothermal conditions. Their crystal structures were refined with three-dimensional X-ray data toR _w=0.033 resp. 0.055. In PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O the Cu atoms are [4+1] and [4+2] coordinated and via SeO₃ groups a three-dimensional atomic arrangement is built up. In Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ there are sheets, which are connected only via Pb-O bonds ranging from 2.98 Å to 3.16 Å.

     

Mittlere Schwingungsamplituden von HBCl2, HAlCl2 und HGaCl2

Summary Mean amplitudes of vibration of the isostructural molecules HBCl₂, HAlCl₂ and HGaCl₂ and of its deuterated analogous have been calculated from spectroscopic data in a wide temperature range. The results are briefly discussed and some comparisons with data of related species are also made.

     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

The crystal structure determinations and refinements of K2S2O7, KNaS2O7 and Na2S2O7 from X-ray powder and single crystal diffraction data

The crystal structures of K₂S₂O₇, KNaS₂O₇ and Na₂S₂O₇ have been solved and/or refined from X-ray synchrotron powder diffraction data and conventional single-crystal data. K₂S₂O₇: From powder diffraction data, monoclinic C2/c, Z=4, a=12.3653(2), b=7.3122(1), , β=93.0792(7)°, R_Bragg=0.096. KNaS₂O₇: From powder diffraction data; triclinic , Z=2, a=5.90476(9), b=7.2008(1), , α=101.7074(9), β=90.6960(7), γ=94.2403(9)°, R_Bragg=0.075. Na₂S₂O₇: From single-crystal data; triclinic , Z=2, a=6.7702(9), b=6.7975(10), , α=116.779(2), β=96.089(3), γ=84.000(3)°, R_F=0.033. The disulphate anions are essentially eclipsed. All three structures can be described as dichromate-like, where the alkali cations coordinate oxygens of the isolated disulphate groups in three-dimensional networks. The K-O and Na-O coordinations were determined from electron density topology and coordination geometry. The three structures have a cation-disulphate chain in common. In K₂S₂O₇ and Na₂S₂O₇ the neighbouring chains are antiparallel, while in KNaS₂O₇ the chains are parallel. The differences between the K₂S₂O₇ and Na₂S₂O₇ structures, with double-, respectively single-sided chain connections and straight, respectively, corrugated structural layers can be understood in terms of the differences in size and coordinating ability of the cations.     

The reflectivity spectra of ZnXP2 (X=Si, Ge, and Sn) compounds

Full Potential Augmented Plane Wave plus local orbital method ( FAPW+lo) calculations were performed for ZnSiP₂, ZnGeP₂, and ZnSnP₂ in the chalcopyrite structure in order to investigate the optical properties and to show the origin of the different optical transitions and their correspondence in the band structure. It is found that the most important features of the band gap is pseudo-direct for ZnSiP₂, indirect for ZnGeP₂, and direct for ZnSnP₂. Then the contribution of the different transitions peaks are analyzed from the imaginary part of the dielectric function and the reflectivity spectra.     

Die Kristallstruktur von Dikalium-trikobalt(II)-dihydroxid-trisulfat-dihydrat,K2Co3(OH)2(SO4)3·2H2O

Crystals of K₂Co₃(OH)₂(SO₄)₃·2H₂O were synthesized under hydrothermal conditions. The crystal structure [a=17.945 (4) Å,b=7.557 (2) Å,c=9.760 (3) Å, space group Cmc2₁,Z=4] was determined by direct methods and refined with single crystal X-ray data. The H atoms were located byFourier syntheses. Their structural parameters were refined, too. The finalR-values areR=0.025 andR _w =0.028 (w=1/) for 612 reflections withF ₀>3 (F ₀). Both Co(II) atoms are octahedral six coordinated and form zigzag chains running parallel [001]. These chains are connected via sulfate groups to built up sheets parallel (100). The KO₉ polyhedron and one of the four hydrogen bonds link these sheets.

     

Crystal growth, structure and magnetic properties of the double perovskites Ln2MgIrO6 (Ln=Pr, Nd, Sm-Gd)

Single crystals of double-perovskite type lanthanide magnesium iridium oxides, Ln₂MgIrO₆ (Ln=Pr, Nd, Sm-Gd) have been grown in a molten potassium hydroxide flux. The compounds crystallize in a distorted 1:1 rock salt lattice, space group P2₁/n, consisting of corner shared MO₆ (M=Mg²⁺ and Ir⁴⁺) octahedra, where the rare earth cations occupy the eight-fold coordination sites formed by the corner shared octahedra. Pr₂MgIrO₆, Nd₂MgIrO₆, Sm₂MgIrO₆, and Eu₂MgIrO₆ order antiferromagnetically around 10-15 K.