Rare Earth Metal-Initiated Polymerizations of Polar and Nonpolar Monomers

Abstract

Organolanthanide(III) initiated polymerization of methyl methacryate gave both syndiotactic and isotactic living polymers of high molecular weight. Organolanthanide(III) initiated polymerization of alkyl acrylates also gave high molecular weight poly(alkyl acrylate)s with very narrow molecular weight distribuion in high yield. Molecular weights of the resulting polymers increased linearly with the conversion. Random and block copolymerizations of alkyl acrylates with methyl methacrylate were realized successfully. For the sake of development of the olefin polymerization catalyst, bulky substituents were introduced into Me₂Si bridged Cp rings and they were used as ligands for the lanthanide complexes. Tri- and divalent lanthanide complexes with such ligands showed high activity for olefin polymerization and gave high molecular weight polyolefins.     

Stereospecific polymerization of 9-fluorenyl methacrylate: Tacticity effects on the thermal and photophysical properties of the polymers

Poly(9-fluoreneyl methacrylate) was obtained through anionic polymerization with t-BuLi and t-BuMgBr and through radical polymerization with α,α′-azobisisobutyronitrile. Anionic polymerization with t-BuLi in tetrahydrofuran and radical polymerization afforded syndiotactic polymers (rr ∼ 90%), whereas anionic polymerization with Li and Mg initiators in toluene and CH₂Cl₂ led to isotactic polymers. The thermal and photophysical properties of the polymers were examined. A syndiotactic polymer tended to show higher glass transition and decomposition temperatures than an isotactic polymer. However, polymers with different tacticities were not likely to assume specific, distinctive conformations such as a helix or a π-stacked conformation in solution. An isotactic polymer showed stronger interactions in a CH₂Cl₂ solution with 2,4,7-trinitro-9-fluorenylidenemalononitrile, an electron-acceptor molecule, than a syndiotactic polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4656–4665, 2004     

Ligated anionic polymerization: An innovative elf-atochem technology for the polymerization of (meth)acrylates

Admittedly performing materials, (meth)acrylic polymers, used in a wide variety of applications, are traditionally produced by radical polymerization processes. The extension of living polymerization, originally developed for dienes and vinyl-aromatics, to (meth)acrylic polymers, would be an interesting opening to a variety of products with a large scope of properties and applications. However, this method suffers from chemical and technical limitations when applied to (meth)acrylates under the usual conditions of solvent and temperature. We report how alkoxy alkoxides-based systems combined with a recent Elf Atochem process offer attractive conditions for ultra-fast anionic polymerization of (meth)acrylates at high solid content. Applications to cost effective syndiotactic poly(methyl methacrylate) and block copolymers syntheses are described.     

Stereocontrol in the free‐radical polymerization of methacrylates with fluoroalcohols

The free‐radical polymerization of methyl methacrylate (MMA), ethyl methacrylate (EMA), isopropyl methacrylate (IPMA), and tert‐butyl methacrylate (t‐BuMA) was carried out under various conditions to achieve stereoregulation. In the MMA polymerization, syndiotactic specificity was enhanced by the use of fluoroalcohols, including (CF₃)₃COH as a solvent or an additive. The polymerization of MMA in (CF₃)₃COH at −98 °C achieved the highest syndiotacticity (rr = 93%) for the radical polymerization of methacrylates. Similar effects of fluoroalcohols enhancing syndiotactic specificity were also observed in the polymerization of EMA, whereas the effect was negligible in the IPMA polymerization. In contrast to the polymerizations of MMA and EMA, syndiotactic specificity was decreased by the use of (CF₃)₃COH in the t‐BuMA polymerization. The stereoeffects of fluoroalcohols seemed to be due to the hydrogen‐bonding interaction of the alcohols with monomers and growing species. The interaction was confirmed by NMR measurements. In addition, in the bulk polymerization of MMA at −78 °C, syndiotactic specificity and polymer yield increased even in the presence of a small amount {[(CF₃)₃COH]/[MMA]_o < 1} of (CF₃)₃COH. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4693–4703, 2000     

Stereochemistry of the free‐radical polymerization of zinc methacrylates coordinated with a bidentate ligand

The polymerization of zinc methacrylates coordinated with a bidentate ligand ( 1 – 4 ) was carried out in chloroform at 60°C. The polymerization of these monomers gave chloroform‐insoluble polymers. Stereoregularity of the polymers was estimated from ¹H NMR spectra of poly(methyl methacrylate)s (PMMAs) derived from the original polymers. Monomers 1 and 2 gave slightly different polymers compared with conventional ones obtained by polymerization of methacrylic acid, while 3 afforded higher amounts of isotactic polymers than 1 and 2 . Conversely, 4 gave a polymer of high syndiotacticity. Furthermore, the relationship between triad tacticity and monomer concentration in the feed was studied. Consequently, it was demonstrated that the structure of bidentate ligands coordinated with zinc ion influences the stereoregularity of the resulting polymers.     

Asymmetric polymerization of methacrylates

The syntheses of optically active polymers having helical conformation from bulky methacrylates are reviewed focusing on selected topics. The monomers include triphenylmethyl methacrylate and its analogues. Asymmetric anionic polymerization of the monomers gives isotactic, optically active polymers having a helical structure with excess helicity. The isotactic content and the extent of helical‐sense excess depend on the monomer structure and the reaction conditions. In the case of methacrylates, completely isotactic and single‐handed helical polymers can be produced by asymmetric anionic polymerization (helix‐sense‐selective polymerization). Asymmetric radical polymerization is also possible for this class of monomer. Some of the helical polymers show chiral recognition ability toward a wide range of racemic compounds. Polymers having main‐chain configurational chirality are also discussed.     

The Relationship of Reaction Temperature,Tg and Rich‐Syndiotacticity of Poly(alkyl methacrylate)s in Modified Microemulsion Polymerization

Nanoscale poly(alkyl methacrylate)s including poly(methyl methacrylate), poly(ethyl methacrylate), poly(cyclohexyl methacrylate), poly(iso‐butyl methacrylate) and poly(benzyl methacrylate) were prepared by a modified microemulsion polymerization procedure. NMR analysis suggested that these poly(methacrylate)s samples were higher in syndiotactic content, lower in isotactic content and the glass transition temperatures (T_gs) of them were also higher than those reported in the literature. The tacticities of the poly(methacrylate)s, beside the restricted volume effect of nanoparticles during the modified microemulsion polymerization, were mainly influenced by the reaction temperature, the lower the reaction temperature, the higher the syndiotacticity of the products. The syndiotacticity of the product decreased obviously when the polymerization was carried out at a temperature far above the T_g of the resulting polymer. It was also shown that the tacticity of the polymer was affected by the monomer structure, a monomer with the bulkier alkyl side group would liable to result in a polymer with richer syndiotacticity. Possible mechanism of rich‐syndiotacticity was also discussed.     

Synthesis and chiral recognition ability of optically active poly{N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide} with various tacticities by radical polymerization using Lewis acids

The radical polymerization of an optically active methacrylamide, N‐[(R)‐α‐methoxycarbonylbenzyl]methacrylamide, was carried out in the absence and presence of Lewis acids such as yittribium trifluoromethanesulfonate [Yb(OTf)₃] and scandium trifluoromethanesulfonate [Sc(OTf)₃]. Catalytic amounts of the Lewis acids significantly affected the stereoregularity of the obtained polymers. The polymerization with Yb(OTf)₃ in tetrahydrofuran afforded isotactic polymers (up to mm = 87%), whereas the conventional radical method without the Lewis acid produced polymers rich in syndiotacticity (up to rr = 88%). The radical polymerization in the presence of MgBr₂ proceeded in a heterotactic‐selective manner (mr = 63%). Thus, the isotactic, syndiotactic, and heterotactic poly(methacrylamide)s were synthesized by the radical processes. The chiral recognition abilities of the obtained optically active poly(methacrylamide)s were affected by the stereoregularity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3354–3360, 2003     

Stereoregulation in the radical polymerization of vinyl esters

To determine favorable conditions for preparation of syndiotactic polymers, various factors which influence the stereoregulation of vinyl esters were studied. In bulk polymerizations, vinyl esters having bulky substituents or polar substituents were found most suitable for the syndiotactic polymerization. Tri-n-butylborane and azobisisobutylonitrile showed some difference in stereoregulation, the magnitude of the difference being dependent on the type of vinyl ester used. Solvents were found to have a significant effect on stereoregulation. Some gave higher syndiotacticity than bulk and some gave lower syndiotacticity.     

Preparation and (13C)NMR spectroscopy of stereoregular poly(methacrylic acid)

Several procedures for synthesis of stereoregular poly(methacrylic acid) have been examined and the polymer characterized by (¹³C)NMR. Using d⁶ DMSO as solvent for spectroscopy gives better spectra than those previously obtained using aqueous solutions and stereochemical splittings can be resolved in the methyl signals. Free-radical polymerization in toluene solution is a Bernouilli process giving mainly heterotactic/syndiotactic polymer. Polymers produced with free-radical initiation in aqueous solution have a higher, and pH dependent, content of syndiotactic triads. A previously described procedure for producing regular polymers by hydrolysis of poly(trimethylsilyl methacrylate) requires modification to produce isotactic contents of above 90% and does not give truly syndiotactic polymer. In contrast, polymerization with γ-radiation can produce polymers with close to 90% of syndiotactic triads.     

Stereoregular poly(methacrylic acids)

A convenient method is described for the preparation of isotactic and syndiotactic poly(trimethylsilyl methacrylates) by using the monomer trimethyl silyl methacrylate and butyllithium initiation in toluene and tetrahydrofuran, respectively. The structure of these polymers enables complete hydrolysis to the corresponding poly(methacrylic acids), which were characterized with respect to tacticity and molecular weight. The asymmetric induction in toluene produced 89% isotactic polymer, while that in tetrahydrofuran gave polymer <90% syndiotactic and heterotactic in terms of triads. A method of fractionation of the polyelectrolytes by gel-permeation chromatography on a preparative scale was shown to be applicable.     

Thermal and radical polymerization of anthracene acrylates and methacrylates

The thermal and radical-induced polymerizations of 9-anthrylmethyl acrylate ( I ), 9-anthrylmethyl methacrylate ( II ), 1′-(9-anthryl)ethyl acrylate ( III ), and 1′-(9-anthryl)ethyl methacrylate ( IV ) have been studied. It was found that the radical-induced polymerization takes place for the methacrylates only, while thermal polymerization leads to polymers for both types of monomers and takes place by Diels–Alder cycloaddition in the case of acrylates, and by both normal enchainment and Diels–Alder cycloaddition in the case of methacrylates.     

Influence of the polymerization temperature on the stereoregularity of radical poly(phenyl methacrylate)

The dependence of the tacticity of radical poly(phenyl methacrylate) upon polymerization temperature has been examined by NMR spectroscopy. Bernouillian statistics were confirmed for polymerization temperatures between 30 and 80°, but slight deviation was found for elevated temperatures (100°). The calculated values of differential enthalpies and entropies of activation for isotactic and syndiotactic propagations revealed that poly(methyl methacrylate) radicals grow more easily in syndiotactic placement than poly(phenyl methacrylate) radicals.     

Stereocontrol in radical polymerization of acrylic monomers

A clear effect of Lewis acids, such. as scandium trifluoromethanesulfonate [Sc(OTf)₃], on stereocontrol during the radical polymerization of a designed monomer, benzyl α-(methoxymethyl)acrylate was found. This Lewis acid also influenced the stereochemistry in the radical polymerization of methyl methacrylate giving a less syndiotactic and more isotactic polymer, although many Lewis acids were not effective. A catalytic amount of Lewis acids, such as Y(OTf)₃ and Yb(OTf)₃, also significantly enhanced isotactic-specificity during the radical polymerization of acrylamide and its derivatives, N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide. Obvious solvent and temperature effects on tacticity were observed in these polymerizations, and poly(NIPAM) with >80% triad isotactic content has been obtained in the presence of Lewis acids.     

A proposal on the steric course of propagation in the homogeneous cationic polymerization of vinyl and related monomers

A stereochemical scheme of propagation was proposed for polymerizations of vinyl and related monomers by Friedel-Crafts catalysts. For the cationic propagation proceeding via the simple carbonium ion pair, the following two factors were considered to be of primary importance in determining the steric course of propagation: (1) the conformation of the last two units of the propagating polymer segment and the direction of approach of the incoming monomer; (2) the tightness of the growing ion pair. Thus, the front-side (less hindered site) attack to the carbonium ion gives rise to a syndiotactic placement and the back-side attack an isotactic placement. The present model can satisfactorily explain the effects of substituents, catalysts, polymerization media, and polymerization temperature on the steric structure of polymers in cationic polymerization of vinyl ethers. Extension of the scheme to polymerization of the β-substituted vinyl ethers in nonpolar solvents predicts formation of the diisotactic structures consistent with the experimental result. The influences of the polymerization condition on the steric structure of polymer were studied for cationic polymerizations of α-methylstyrene at low temperatures. Highly syndiotactic polymers were obtained for homogeneous reactions in toluene-rich media. The isotactic unit increased by increasing the content of methylcyclohexane in the solvent mixture. The effect of catalysts, though insignificant in toluene-rich media, was clearly noted in methylcyclohexane-rich media, less active catalysts (e.g., SnCl₄) yielding higher amounts of the isotactic unit than more active catalysts (e.g., AlCl₃). These results can be readily accommodated in the present model.     

Radical polymerization of methyl methacrylate in the presence of isotactic poly(methyl methacrylate)

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C in DMF in the presence of preformed isotactic PMMA (iMA) with about 90% isotactic triads and different M?_v's, viz., iMA-1: 7.2 × 10⁵; iMA-2, 5.0 × 10⁵; iMA-3, 3.5 × 10⁵; iMA-4, 1.25 × 10⁵; and iMA-5, 1.15 × 10⁵. The MMA:iMA ratio was 6:1. The collected polymers were separated into two fractions by extraction with boiling acetone and characterized by 60 MHz NMR. It is found that the M?_v of the polymer formed ran parallel to the M?_v of iMA. In all cases syndiotactic PMMA (s-PMMA) was produced which associated with the isotactic substrate to form acetone-insoluble stereocomplexes. The syndiotactic polymers probably consist of long syndiotactic and heterotactic sequences. The syndiotacticity decreased with conversion and was generally highest in the presence of iMA-1. With iMA-1 even the formation of some additional i-PMMA (in the acetone-insolubles) was indicated, especially in the later stages of the polymerization. Characterization of the acetone-soluble fractions indicated that i,s-stereoblock polymers were also produced, of which the persistence ratios ρ increased with the M?_v of iMA. From these results it is concluded that this reaction differs from the conventional radical polymerization and can be considered a stereospecific replica polymerization, the driving force being the strong tendency of i- and s-PMMA to associate. The formation of i,s-stereoblock polymers and additional i-PMMA indicates that s-PMMA in its turn can also act as a polymer matrix.     

Stereoregularity of poly(methyl acrylate)

The stereoregularity of poly(methyl acrylate) and poly(methyl acrylate-αd) was determined from the NMR spectra. A method of quantitative determination of stereoregularity of poly(methyl acrylate) proposed in this paper is based on the fact that in the 100 Mc./sec. NMR spectrum the absorption peaks due to methylene protons in syndiotactic configurations overlap absorptions due to only one of two methylene protons in isotactic configurations. The stereostructure of poly(methy1 acrylates) polymerized with anionic catalysts such as Grignard reagents, n-butyllithium, and LiAlH₄ is generally richer in isotactic diads than in syndiotactic diads. For example, poly(methyl acrylate) polymerized with phenylmagnesium bromide as catalyst at ?20°C. consists of 99% isotactic and 1% syndiotactic diads. In radical polymerization, the isotacticity of poly(methyl acrylate) is independent of polymerization temperature. Poly(methyl acrylates) polymerized with a Ziegler-Natta catalyst consisting of Al(C₂H₅)₂Cl and VCl₄ have configurations similar to those polymerized by radical initiators. The stereoregularity of poly(methyl acrylate-α-d) resembled that of poly(methyl acrylate) polymerized under the same conditions.     

Highly isotactic polymethacrylates through radical polymerization of methacrylate esters of some ortho‐bridged triaryl carbinols

The polymerization of 9‐phenyl‐10,10‐dioxo‐thioxanthen‐9‐yl and 9‐phenyl‐10‐oxo‐9,10‐dihydroanthracen‐9‐yl methacrylates obtained under radical initiation (α,α‐azobisisobutyronitrile) in benzene solution proceeds with high isotactic specificity to afford homopolymers with a triad mm content higher than 95%, having presumably a helical main‐chain structure and showing significant resistance to solvolytic degradation in methanol. 9‐Phenyl‐10,10‐dipropyl‐9,10‐dihydroanthracen‐9‐yl methacrylate similarly affords isotactic polymers with an mm of 98% but is much less durable in contact with methanol. The high isotacticity observed for the aforementioned polymethacrylates as well as for poly(1‐phenyl‐dibenzosuberyl methacrylate), previously reported in the literature, reveal a tendency of ortho‐bridged triarylcarbinols to enforce isotacticity on their methacrylate polymers obtained under radical initiation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1180–1186, 2001     

Tacticity control in the radical polymerization of 2,2,2-trifluoroethyl methacrylate with fluoroalcohol

The free-radical polymerization of 2,2,2-trifluoroethyl methacrylate (TEMA) was carried out in fluoroalcohols to achieve stereoregulation. The polymerization reactivity at low temperature and syndiotactic specificity were enhanced by the use of fluoroalcohol as a solvent. The polymer having triad syndiotacticity (rr) of 70% was obtained in perfluoro-t-butyl alcohol. It was noted that the stereochemistry was nearly independent of reaction temperature. The stereoeffect of fluoroalcohols seemed to be due to the hydrogen-bonding interaction between the alcohol and the monomer or growing species. The hydrogen-bonding formation was determined by FTIR. The copolymerization of TEMA with methyl methacrylate (MMA) in hexafluoroisopropanol afforded a copolymer with syndiotactic specificity. By this method, a cladding material for an optical fiber based on poly(methyl methacrylate) (PMMA) with high mechanical strength and low refractive index could be obtained.     

Estimation of Free Radical Polymerization Rate Coefficients Using Computational Chemistry

This study explores the application of computational chemistry to estimate free radical polymerization rate coefficients. The Evans-Polanyi relationship is combined with computed heats of polymerization to estimate copolymerization reactivity ratios for many vinyl monomer pairs, focusing on acrylates, methacrylates and styrene, with accuracy assessed by comparison to experimental values. The effect of different optimization approaches on the values of thermodynamic properties is explored, and it is concluded that a combination of conventional optimization and relaxed potential energy scans was most effective at identifying global minima. The difference between thermodynamic properties calculated using the harmonic oscillator treatment and a hindered rotor model is evaluated for methyl methacrylate polymerization.