Mechanochemical synthesis of a novel C60 dimer connected by a germanium bridge and a single bond

A novel C₆₀ dimer connected by a germanium bridge and a single bond was synthesized by the mechanochemical solid-state reaction using a high-speed vibration milling technique. The structural characterization was made by the ¹H and ¹³C NMR, APCI mass, and UV-vis spectroscopy, and the presence of the electronic interaction between the two C₆₀ cages was demonstrated by the electrochemical method.     

The first dumbbell-type C60 dimer connected by a double donor spacer

A dumbbell-type [60]fullerene dimer in which both C₆₀ units are covalently attached to a double donor spacer has been prepared by a double cycloaddition of azomethine ylide to C₆₀. The CV data indicate that the dimer behaves electrochemically as two independent donor-acceptor units.     

A new photoactive and highly soluble C(60)-TTF-C(60) dimer: charge separation and recombination

The covalent linkage of two [60]fullerene cores to a tetrathiafulvalene (TTF) donor affords a soluble and photoactive C(60)-TTF-C(60) triad. Spectroscopic and photophysical characterization of the C(60)-TTF-C(60) triad are given. Although the cyclic voltammetry measurements reveal no notable interaction between the chromophores in the ground state, photophysical data show that in the excited state an intramolecular electron transfer, evolving from the TTF donor to the singlet state of C(60), prevails, yielding a long-lived charge separated radical pair.     

Mechanochemical synthesis of poly(hydridocarbyne)

Poly(hydridocarbyne) was synthesized by the reaction of bromoform and magnesium metal under the mechanochemical activation conditions.     

Tube and cage C(60)H(60): a comparison with C(60)F(60)

Tube C(60)H(60) (5) with fused five-membered rings is more stable than the cage isomer (1) with isolated five-membered rings. Introduction of endo C-H bonds into structure 5 results in further stabilization, but the most stable tube structure with four endo C-H bonds (7) is higher in energy than the most stable cage structure with ten endo C-H bonds (3) by 74.2 kcal/mol. A comprehensive comparison of C(60)H(60) with C(60)F(60) has been made.     

Phoebegrandine C, a novel proaporphine-tryptamine dimer, from Phoebe grandis (Nees) Merr

A novel proaporphine-tryptamine dimer alkaloid, named phoebegrandine C 1, was isolated from the leaves of Phoebe grandis (Nees) Merr. Its structural elucidation was carried out using spectroscopic techniques, notably 2D NMR.     

Mechanochemical synthesis of iron-alumina (75 vol%) nanocermets

Nanocomposites -Al₂O₃-Fe containing 75 vol% Al₂O₃ have been obtained by reaction milling, in a vibratory ball mill, a stoichiometric excess of alumina with aluminum and hematite. The kinetics of synthesis of the nanocomposite has been studied for milling times between 15min. and 8h. The reduction reaction is completed in about 2h with formation of -Al₂O₃, iron, hercynite (FeAl₂O₄) and clusters of Fe in alumina. The reaction rate appears moderated by the alumina excess.     

Tuning the transport properties of a (C60)2 bridge with electron and hole dopings

The tuning effects of substitutional B and N dopings on the electron transport properties of a C(60) dimer bridge [(C(60))(2)] are investigated by nonequilibrium Green's functions in combination with density functional theory. It is found that, unlike C(60), the equilibrium conductance of (C(60))(2) is very small. However, it can be controlled by electron (N) doping or hole (B) doping, which shifts the molecular energy levels so that the LUMOs or HOMOs align well with the Fermi level and results in LUMO-mediated transport or HOMO-mediated transport. The conductance increases accordingly with a certain number of N or B atoms doped in the C(60)s. Interestingly, when one C(60) is doped with N atoms and the other is doped with B atoms, new transport behaviors arise and rectification is achieved due to the special alignment of the energy levels of the individual C(60)s with the Fermi level. It suggests that cluster or molecule assembling can often realize specific functions which are not available by single molecules and should be taken into consideration in the design of molecular devices.     

Bulk production of a strong covalently linked (C60H(x))2 dimer

The high-pressure treatment of C60 in an H2 atmosphere at high temperatures leads to the efficient formation of a covalently bound dimer and some oligomeric species. The resulting hydrogenated C120 is an example of the bulk production of covalently bound derivatized fullerene cores. Matrix-assisted laser desorption/ionization in conjunction with reflectron time-of-flight mass spectrometry has been applied to the product analysis. The dissociation pattern of selected C120H(2x)+ ions (x > 30) indicates the dimeric structure of (C60H(x))2, as opposed to a giant hydrofullerene species possessing a fused C120 core. However, the results also clearly indicate a much stronger bonding (multiple sigma bonding) between the C60H(x) units than present in cycloaddition products. Evidence of a covalently linked dimer was obtained in labeling experiments, on the basis of which any laser-induced gas-phase aggregation of the C60H(x) monomer during the analysis is discounted.     

Reporting a new class of divanadium(V) compounds connected by an unsupported hydroxo bridge

Dinuclear oxovanadium(V) compounds [LV(V)O(mu-OH)OV (V)L](PF6) [H2L = N,N'-tert-ethylene bis(salicylideneimine) (H 2Salen) and its derivatives] ( 1- 3) have been obtained by aerial oxidation of V (IV)OL precursors in THF in the presence of added NH 4PF 6. The oxidized vanadium(V) probably extracts an OH (-) ligand from the residual moisture in the solvent and is retained as an unsupported hydroxo-bridge between the metal centers of these compounds as confirmed by single-crystal X-ray diffraction analyses. The molecules of 1- 3 have centrosymmetric structures with each vanadium center having a distorted octahedral geometry. The bridging OH (-) group is located trans to the terminal VO t bond. The latter exerts strong trans labilizing influence to set the participating vanadium centers apart by about 4.1 A. These separations are by far the largest (e.g., V...V#, 4.131 A in 1) among all binuclear compounds containing an unsupported hydroxo bridge reported to date. The complexes retain their identity also in solution as established by (1)H NMR spectroscopy. Electrochemically, the behaviors of 1-3 are quite interesting as studied by cyclic voltammetry in acetonitrile, each undergoing three (except 3) nearly reversible metal-based reductions, all in the positive potential range (e.g., at E (1/2) = 0.57, 0.39, and 0.04 V versus Ag/AgCl reference for 1) as indicated by steady state voltammetry. The electrode process at 0.39 V appears to involve a single-step two-electron transfer as revealed from the normal and differential pulse voltammetric data and probably includes a combination of V(V)-V(IV) <--> V(III)-V(IV) mixed oxidation states. Compounds 1-3 thus provide a unique example of divanadium compounds in which the metal centers are linked by an unsupported hydroxo-bridge.     

Convergent,regioselective synthesis of tetrakisfulleroids from C(60)

An efficient synthesis of the two diastereomeric tetrakisfulleroids 14a and 14b is described starting from the readily accessible trans-1 bis-Diels-Alder adduct 12. The challenging issue of generating multiple bond scissions regiochemically within the fullerene framework, here as [5,6] open systems (fulleroids), is simplified into performing two separate regiocontrol phases. The initial bisadduct 12 can only undergo syn or anti photochemically promoted intramolecular tandem [4 + 4] and retro [2 + 2 + 2] rearrangements, giving the two isomers 14a and 14b in an unexpected 1:4 ratio. Interestingly, the UV-vis absorption spectra of these two isomers are quite different even though their local chromophore perturbations are distant from each other.     

Mechanochemical synthesis of poly(butadiene-b-acrylic acid)

The preparation of block copolymer with polybutadiene, respectively poly(acrylic acid) sequences, using mechanochemical methods was investigated. The synthesis involves the generating of polybutadiene macroradicals, by ultra-high speed stirring of the polymer in toluene solution. The macroradicals are capable to initiate the polymerization of acrylic acid present in the reaction medium, leading to block copolymer formation. The influence of different parameters, such as temperature, duration, acrylic acid/polybutadiene molar ratio, on the yield and composition of the synthesized copolymer was studied.     

The reaction of fullerene C(60) with phthalazine: the mechanochemical solid-state reaction yielding a new C(60) dimer versus the liquid-phase reaction affording an open-cage fullerene.

The reaction of fullerene C(60) with phthalazine was studied both in solution and in the solid state using the high-speed vibration-milling technique. The reaction in solution gave open-cage fullerene derivative 1 in 44% yield by a one-pot reaction. In contrast, the solid-state reaction afforded dimeric derivative 2 as the sole product. Dimeric derivative 2 was found to undergo intramolecular [2 + 2] cycloaddtion between the two C(60) cages located in close proximity to give a new C(60) dimer 6 in quantitative yield. The structures of these new derivatives of C(60) were determined by spectroscopic methods, and the electrochemical behavior of 2 and 6 was also studied.     

The reversible formation of a single-bonded (C(60)(-))(2) dimer in ionic charge transfer complex: Cp*(2)Cr.C(60)(C(6)H(4)Cl(2))(2). The molecular structure of (C(60)(-))(2)

A new ionic complex of C60 with decamethylchromocene, Cp*2Cr.C60(C6H4Cl2)2 (1), has been obtained. The fullerides are monomeric in 1 at room temperature, whereas they form a single-bonded (C60-)2 dimer at low temperatures, the structure of which has been studied by the X-ray diffraction on a single crystal at 100 K. The length of the intercage C-C bond is 1.597(7) A and the interfullerene distance is equal to 9.28 A. A phase transition attributed to the reversible C60*- dimerization is observed in the 220-200 K range. The transition is accompanied by changes in the unit cell parameters, the decrease of the magnetic moment from 4.20 muB (S = 3/2, 1/2) to 3.88 muB (S = 3/2) and the appearance of EPR signal from Cp*2Cr+, simultaneously.     

The synthesis and characterization of C60 chemically modified poly(N-vinylcarbazole)

Addition of C₆₀ moiety, a powerful electron acceptor to poly(N-vinylcarbazole) (PVK) by chemical reaction modifies considerably the physical and chemical properties of PVK. The characterization techniques employed are UV-visible, IR, DSC, TGA, ESR, ¹³C-NMR spectroscopy, scanning electron microscopy, XRD, and cyclic voltammetry. The fullerenated PVK, which has a visibly earthy yellow cast when compared with the unreacted polymer, has a new structure in the UV-vis absorption spectrum with the active range extending from about 280 to 870 nm, its apparent temperature sensitivity is intriguing, and an unusual temperature dependence for the ESR spectrum is observed. Considerable difference of electronic structure between pure PVK and C₆₀-PVK copolymer is indicated. The thermal stability and oxidation-reduction activation of pure PVK are enhanced by C₆₀-chemical modification. © 1996 John Wiley & Sons, Inc.