PREPARATION OF POLY （LACTIC ACID） THROUGH THIONYL CHLORIDE ACTIVATED POLYCONDENSATION

A two-step process was used to synthesize the high molecular weight poly (lactic acid) using thionyl chloride as an activator for the polycondensation of prepolymer of lactic acid.The products were characterized by GPC,DSC and 1H-NMR.Poly(L-lactic acid)(PLLA) with molecular weight Mw:32875 was obtained when thionyl chloride was used.while low molecular weight PLLA MW:7350 was yielded without thionyl chloride.Effects of the concentration of thionyl chloride,polymerization time and bases on the molecular weight of poly(lactic acid) were investigated.In DSC scans the glass transition temperatures(Tg)of the resulting polymers varied from 25.3 to 57.6℃.and the Tg of poly(L-lactic acid)was higher than that of poly (D,L0lactic acid)(PDLLA).The melting points of poly(L-lactic acid)and poly (D,L-lactic acid) could not be found unless the polymers were obtained by thionyl chloride activator.     

Polyethylenimine （PEI）-g-comb-poly（ethylene glycol）-transferrin（Ⅰ）： Tumor-targeted Vector for Gene Delivery In.vitro

The work described the synthesis and evaluation of PEI-g-comb-PEG-transferrin as a potential system for gene therapy in vitro. The MW of PEG was 10KDa, and PEI was 2KDa. Its structure was identified by NMR, FT-IR and TGA spectroscopy. MTT assay found that at concentration up to 4000 n mol/L of the polymer, cell viability was over 85%. The bio-character of polymer/DNA complex was characterized by agarose gel electrophoresis, ethidium bromide exclusion and zeta-potential assay. The polymer could retardate DNA at N/P ratio 3.0-3.5 （mol/mol）. The particle size of the polymer/DNA complex was less than 300 nm. Transfection efficiency of the complex was studied in COS7 and NT2 cell lines.     

THE EFFECT OF MODIFICATION OF COORDINATING GROUPS ON THE CATALYTIC BEHAVIORS OF POLYMER CATALYSTS

Several polymer-supported palladium complex catalysts containing two different coordinatinggroups were prepared and the cooperative effect of the coordinating groups on the catalytic behaviorsof polymer catalysts was studied. It was found that poly(acrylic acid-co-acrylonitrile)-Pd complex(PAA-AN-Pd) is a more active and stable catalyst for hydrogenation than both poly(acrylic acid)-Pd and poly(acrylonitrile)-Pd complexes. A marked change of catalytic behaviors of poly(N-substituted maleamic acid-co-styrene)-Pd complexes was observed in comparison with poly(maleicacid-co-styrene)-Pd complex. Acetophenone was reduced to 1-phenyl ethanol by poly(N-phenylmaleamic acid-Co-styrene)-Pd complex (N-1-Pd), but ethylbenzene was obtained using poly(maleicacid-co-styrene)-Pd complex as a catalyst. The influence of solvents, additives and N/Pd gramatomic ratio on the catalytic behaviors of the polymer complexes was investigated.     

SYNTHESIS AND CHARACTERIZATION OF A NEW COMBLIKE POLYMER BASED ON POLY (VINYL METHYL ETHER-ALT-MALEIC ANHYDRIDE) BACKBONE

A new comblike polymer host for polymer electrolyte was synthesized by reactingmonomethyl ether of poly (ethylene glycol) with poly (vinyl methyl ether alt-maleic anhydride)and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solventfor the esterification in order to obtain a completely soluble product. The synthesis processwas traced through by IR. Compared with the model compounds, the presumed structure ofthis comblike polymer has been proved to be valid by ~(13)C NMR. The comb polymer is a whiterubbery solid. It can be dissolved in butanone and THF, and manifests good film formingability.     

SYNTHESIS OF SOLUBLE POLY（3,4-DIHYDROXY-o-TOLYLENE）： REDOX POLYMER

Conventional chloromethylation, paraformaldehyde/hydrogen chloride in acetic acid medium, was applied to 1,2- dimethoxybenzene. Chloroform-soluble poly（3,4-dimethoxy-o-tolylene） was obtained with an intrinsic viscosity of 0.034 dL g^-1. The polymer was evaluated as a condensation redox polymer precursor formed by a Friedel-Crafts reaction. Cleavage of the methoxy groups present in this polymer resulted in poly（3,4-dihydroxy-o-tolylene） which manifested a great air-oxidation resistance. The redox property of the latter polymer was found to be 1017 mV by potentiometric titration with 0.05 N ceric ammonium nitrate at 25℃. This midpotential was compared to that of catechol, a monomeric analogue, under the same titration conditions.     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Synthesis of the Biomimetic Polymer： Aliphatic Diamine and RGDS Modified Poly（d,l-lactic acid）

A novel poly（d, /-lactic acid） （PDLLA） based biomimetic polymer was synthesized by grafting maleic anhydride, butanediamine and arg-gly-asp-ser （RGDS） peptides onto the backbone of PDLLA, aiming to overcome the acidity and auto-accelerating degradation of PDLLA during degradation and to improve its biospecificity and biocompatibility. The synthetic copolymer was characterized by FTIR, ^13C NMR and amino acid analyzer （AAA）.     

Controlled/living ring-opening polymerization of ε-caprolactone catalyzed by phosphoric acid

The bulk ring-opening polymerization(ROP) of ε-caprolactone(ε-CL) by various phosphoric acids using phenylmethanol as the initiator was conducted.1,1’-bi-2-Naphthol(BINOL)-based phosphoric acid was found to be an effective organocatalyst for ROP leading to polyesters at 90℃.The overall conversion to poly(ε-caprolactone) was more than 96% and poly(ε-caprolactone) with M w of 8400 and polydispersity index of 1.13 was obtained.1 H NMR spectra of oligomers demonstrated the quantitative incorporation of the protic initiator in the polymer chains and showed that transesterification reactions did not occur to a significant extent.The controlled polymerization was indicated by the linear relationships between the number-average molar mass and monomer conversion or monomer-to-initiator ratio.In addition,the present protocol provided an easy-to-handle,inexpensive and environmentally benign entry for the synthesis of biodegradable materials as well as polyesters for biomedical applications.     

The Effect of Synthesis Method on Three-component IPNs Morphology and Property

Three-component IPNs were synthesized from polyurethane/poly (methyl acrylate aminoethyl methacrylate)/epoxy resin [PU/P(MADMA)/EP] by simultaneous synthesis interpenetrating polymer networks method(SINs) and sequential synthesis interpenetrating polymer networks method (STPNs). Comparing the effect of the two synthesis methods on the morphology and mechanical properties of three-component IPNs, it was found that the compatibility of three-component IPNs depends on the component ratios and interpenetrating formation , the different synthesis methods make the entanglement and interpenetrating between networks changed. The tensile strength of SIPNs is bigger than that of SINs, while the elongation at break of SINs is bigger than that of SIPNs. It is feasible to use stepwise staining method to observe the morphology change.     

Investigation of Hydrolysis in Poly（ethylene terephthalate） by FTIR-ATR

The hydrothermal aging of poly(ethylene terephthalate)(PET) was investigated at 70 95 °C. A new method to investigate the hydrolysis degree of PET by Fourier transform infrared spectroscopy(FTIR) was proposed. The spectra during the hydrothermal aging were measured using attenuated total reflection accessory(ATR). Peak resolving of carbonyl regions was performed, and the ratio of two groups of bands representing carboxylic acids and esters respectively were calculated to show the hydrolysis degree of ester groups in PET. The acid/ester ratio shows exactly the same trend as the average chain scission number per unit mass at various temperatures and thus can be used as a parameter to characterize the hydrolysis and random chain scission of PET. This method related to the hydrolysis mechanism directly, is simple, fast and convenient compared to the traditional methods such as viscometry, end-group titration and size exclusion chromatography(SEC). It may also be useful in hydrolysis characterization of other polyesters.     

Pervaporation separation of water/alcohol mixtures using composite membranes based on polyelectrolyte multilayer assemblies

Composite pervaporation membranes composed of an asymmetric polyamide-6 membrane and an ultrathin self-assembled polyelectrolyte separating layer are described. The supporting membrane was prepared from both an unmodified polyamide-6 and a comb-like polymer with carboxyl terminated polyamide-6 side chains. A high end group concentration was found to be advantageous for sufficient adhesion of the multilayer systems on the supports. Up to 20 layers were deposited onto the membrane surface by dipping the membranes in aqueous solutions containing oppositely charged polyelectrolytes. The polyanions used were poly(acrylic acid), poly(styrene sulfonic acid) and alginic acid. The polycations used were poly(diallyldimethylammoniumchloride), chitosan and poly(ethylenimine). Performance of these membranes depends strongly on the layer number and on the type of polyelectrolytes. In general, membranes modified with two weak polyelectrolytes of high charge density gave the best separation properties while those modified with strong polyelectrolytes of low charge density led to poorer separation properties. However, the highest separation factor (≥10,000) for a water/2-propanol mixture (12/88 w/w) at permeate flux of 300 g/m²h was obtained with six double layers consisting of poly(ethylenimine) and alginic acid. These composite membranes were stable over an operating period of at least 400 h.     

SYNTHESIS AND CHARACTERIZATION OF POLY(ASPARTIC ACID) AND ITS DERIVATIVES AS BIODEGRADABLE MATERIALS

ABSTRACT

Three types of modified poly(aspartic acid)s, such as poly(aspartic acid-co-aminocarboxylic acid) (4), alkylamine modified poly(aspartic acid) (5) and crosslinked poly(aspartic acid) (6), were synthesized and calcium-ion chelating ability, hygroscopicity and water absorption were evaluated. The calcium-ion chelating ability of 4 depended on the kind of aminocarboxylic acids and the content of aminocarboxylic acid in the copolymer. The highest value was 3 times higher than that of poly(acrylic acid) with a M_w of 14000. The highly modified PASP, e.g., 50 mol% lauryl amine modified poly(aspartic acid), showed the highest by grogroscopicity among homopoly(aspartic acid)s and modified poly(aspartic acid)s. The maximum swelling of poly(aspartic acid) hydrogel prepared by the γ-irradiation of homopoly(as-partic acid) was 3400 g-deionized water/g-dry hydrogel.     

聚乳酸-b-聚(N~ε-苄氧羰基-L-赖氨酸)-b-聚乙二醇的合成与表征

用端氨基聚乳酸做引发剂,在DMF中引发Nε-苄氧羰基-L-赖氨酸酐(Lys(Z)-NCA)聚合,合成了端氨基聚(Nε-苄氧羰基-L-赖氨酸)-b-聚乳酸两嵌段共聚物.以端羧基聚乙二醇经NHS活化与端氨基聚(Nε-苄氧羰基-L-赖氨酸)-b-聚乳酸偶联,合成了聚(乳酸-b-Nε-苄氧羰基-L-赖氨酸-b-乙二醇)三嵌段聚合物.利用IR、1H-NMR、GPC和TEM对它们的结构、形态进行了表征,结果表明,所合成的分子量可控、分子量分布窄(Mw/Mn=1.07)的嵌段共聚物,酰化反应产率达70%以上.同时聚乙二醇和Nε-苄氧羰基-L-赖氨酸被引入到聚乳酸主链中,在聚合物侧链脱保护后有望改善聚乳酸的细胞亲和性。     

Kinetics of Adsorption and Desorption of Poly(ethylenimine) and Its Complex with Copper(II) on Copper(II) Oxide Powder

Adsorption of poly(ethylenimine) and complexes of poly(ethylenimine) with copper(II) ions on copper(II) oxide powder has been investigated. The rate of adsorption and reaction between poly(ethylenimine) and CuO is very fast. The desorption rate of the complex of poly(ethylenimine) with copper(II) ions is slower and decreases when the initial polymer concentration is decreased. The desorption rate passes through a minimum when the initial concentration of CuO powder in the mixture increases. A mathematical model of polymer adsorption and desorption is proposed. Copyright 2000 Academic Press.     

聚天冬氨酸的合成研究

以L-天冬氨酸为原料,磷酸为催化剂,在不同溶剂中进行缩聚反应,合成中间体聚丁二酰亚胺(PSI),当混合溶剂为m三甲苯／m环丁砜=7／3时,可得到较高分子量的PSI。当催化剂与单体的质量比为0．14时,分子量达到最大值。将PSI碱解得到聚天冬氨酸。     

Microwave-assisted Polycondensation of L-2-Hydroxy-3-phenylpropanoic Acid

The attempts to prepare novel biodegradable polymer carriers for drug controlled release systems have been tried in our group1,2. Poly (L-2-hydroxy-3-phenylpropanoic acid) (PLHPPA) can be considered as derivative of poly (lactic acid) (PLA) which has been applied as biomaterials in drug delivery systems, surgical repair and tissue engineering materials3 for its excellent biodegradability and biocompatibility. PLHPPA contains phenyl groups in its structure. It is designed as a hydrophobic…     

Selective hydrolysis of oxazoline block copolymers

Block copolymers, composed of a hydrophobic block [poly(N-t-butylbenzoyl ethylenimine) or poly(N-lauroyl ethylenimine)] and a hydrophilic block [poly(N-propionyl ethylenimine)], synthesized by cationic ring-opening polymerization of 2-substituted Δ2-oxazolines, were selectively deacylated by acid hydrolysis. The hydrolysis process was monitored by using ¹H-NMR. The results show that the propionyl groups could be removed from the hydrophilic block of the polymer chain without touching the hydrophobic block, if appropriate reaction conditions were used.     

Surfactant effect on the lower critical solution temperature of poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups

 The surfactant effect on the lower critical solution temperature (LCST) of thermosensitive poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups was examined in terms of molecular interactions between the polyphosphazenes and surfactants including various anionic, cationic, and nonionic surfactants in aqueous solution. Most of the anionic and cationic surfactants increased the LCST of the polymers: the LCST increased more sharply with increasing length and hydrophobicity of the hydrophobic part of the surfactant molecule. The ΔLCSTs (T _0.03M− T _0M), the change in the LCST by addition of 0 and 0.03 M sodium dodecyl sulfate (SDS), were found to be 7.0 and 14.5 °C for the polymers bearing ethyl esters of glycine and aspartic acid, respectively. The LCST increase of poly(organophosphazene) having a more hydrophobic aspartic acid ethyl ester was 2 times larger compared with that of the polymer having glycine ethyl ester as a side group. The binding behavior of SDS to the polymer bearing glycine ethyl ester as a hydrophobic group was explained from the results of titration of the polymer solutions containing SDS with tetrapropylammonium bromide. Graphic models for the molecular interactions of polymer/surfactant and polymer/surfactant/salt in aqueous solutions were proposed. Received: 17 February 2000/Accepted: 25 April 2000     

高分子量聚α-乙烯呲啶的特性粘数与分子量的关系

在浓硫酸或稀硫酸中聚合得到了高分子量P2VP,~(13)C-NMR谱确定其为无规聚合物。特性粘数(切变速度D=0)与分子量之间的关系为[η]_(D=0)=1.27×10~(-2)(?)_W~(0.70)(在DMF中,25℃,(?)_W=2.66×10~6—10.0×10~6)。在DMF中,25℃,不依赖于切变速度的最大特性粘数为260毫升·克~(-1),相应的分子量M_η=1.74×10~6左右。无扰尺寸(_0/M)=6.08×10~(-18)厘米~2·克~(-1),在DMF 中B参数为1.91×10~(-27)厘米~3。     

Rapid controlled hydrolytic degradation of poly(l-lactic acid) by blending with poly(aspartic acid-co-l-lactide)

Although poly(lactic acid) is known as a biodegradable polymer, its hydrolytic degradation is extremely slow, taking years in water and in the human body. In this study the effects of blending oligomeric poly(aspartic acid-co-lactide) (PALs) on the hydrolytic degradation of poly(l-lactic acid) (PLLA) were studied in detail. It was found that the addition of PAL did not accelerate the hydrolysis of the PLLA in air (25 °C, 60% relative humidity), but significantly accelerated it in a phosphate buffer solution. The degradation rate becomes higher for the blends containing PAL with higher molar ratios of lactide to aspartic acid units, [LA]/[Asp], when PLLA/PAL blends prepared with different PALs are compared at the same PAL concentration. TEM results, in which the distribution of PALs with higher [LA]/[Asp] occurs at a smaller scale in blends, imply that higher miscibility of the PAL with PLLA results in higher contact area between the components, thereby accelerating the degradation efficiently.