三臂PPO-PDLA-PLLA 嵌段共聚物的制备与结构及其立构复合体的结晶行为

以环氧丙烷聚醚三元醇(PPO)为起始剂, 开环聚合D 型丙交酯(DLA), 合成三臂环氧丙烷聚醚三元醇-聚右旋乳酸(PPO-PDLA)嵌段预聚体. 采用端基活化技术对预聚体进行端羟基活化, 再与L 型丙交酯(LLA)进行逐步开环聚合,合成了不同分子量的三臂环氧丙烷聚醚三元醇-聚右旋乳酸-聚左旋乳酸(PPO-PDLA-PLLA)嵌段共聚物. 采用红外(FTIR)、核磁(NMR)和凝胶渗透色谱(GPC)等对三臂PPO-PDLA-PLLA 嵌段共聚物的测试表明, 合成的嵌段共聚物分子链具有很高的立构规整度; 通过调节LLA 单体与PPO-PDLA 预聚体的投料比, 不仅可控制产物的分子序列结构, 而且样品的数均分子量可大于100 kDa. 差示扫描量热仪(DSC)和广角X 射线衍射(WAXD)结果显示, 三臂PPO-PDLAPLLA嵌段共聚物的异构体链段分子间生成立构复合晶体, 其熔点约为200 ℃, 且没有PLLA 均聚物链段结晶现象. 实验结果表明, 这是一类具有实际应用价值的新型耐热聚乳酸(PLA)材料.     

PH/温度响应的两亲性嵌段共聚物的研究

刺激响应性两亲性嵌段共聚物由于具有多种潜在的用途而引起广泛关注。其中,pH和温度响应的嵌段共聚物被认为是较易获得并对外界环境刺激响应较敏感的一类聚合物。本文综述了利用各种可控/活性聚合方法制备不同结构刺激响应性的两亲性嵌段共聚物研究的最新进展,重点介绍聚（甲基）丙烯酸及其酯类与聚环氧乙烷(PEO)和聚环氧丙烷(PPO)类结构的两亲性嵌段共聚物的合成以及它们在水溶液中对pH值和温度变化的响应性。     

Amphiphilic Seven-arm Star Triblock Copolymers with Diverse Morphologies in Aqueous Solution Induced by Crystallization and pH

Well-defined amphiphilic seven-arm star triblock copolymers containing hydrophobic crystalline poly(ε-caprolactone)(PCL) blocks, hydrophobic non-crystalline poly(tert-butyl acrylate)(PtBA) blocks and hydrophilic poly(ethylene glycol)(PEG) blocks were precisely synthesized by a combination of ring-opening polymerization(ROP), atom transfer radical polymerization(ATRP) and “click” reaction. Such star copolymers could self-assemble into “core-shell-corona” micelles and “multi-layer” vesicles depending on the fraction of each block. Meanwhile, the selective hydrolysis of middle PtBA blocks into the poly(acrylic acid)(PAA) blocks allowed the star block copolymers to further change their morphologies of aqueous aggregates in response to pH values.     

Metal-free synthesis of amphiphilic functional polycarbonates

Amphiphilic block copolymers of poly(5-benzyloxy trimethylene carbonate)(PBTMC) and poly(ethylene glycol)(PEG) were synthesized through enzymatic polymerization using immobilized porcine pancreas lipase(IPPL).The obtained copolymers with different compositions were characterized by GPC and ~1H NMR.The copolymer composition was in agreement with the feed ratio. The molecular weight of the copolymers showed an increasing trend with the decrease of PEG contents.Micelles of the copolymers were formed by dialysis procedure,and characterized by transmission electron microscopy (TEM).     

ATRP法合成两亲性嵌段共聚物PSt-b-PAA及其在离子液体[BMIM][PF6]中的自组装行为研究

利用原子转移自由基聚合法(ATRP)合成了分子量可控、分子量分布窄的嵌段共聚物聚苯乙烯-b-聚丙烯酸叔丁酯(PSt-b-PtBA), 进而在酸性条件下由水解反应得到了两亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PSt-b-PAA), 并通过凝胶渗透色谱(GPC)、傅立叶变换红外光谱(FTIR)、核磁共振(1H NMR)等测试手段对产物进行了表征. 使三种分子量不同的两亲性嵌段共聚物在离子液体1-丁基-3-甲基咪唑六氟磷酸盐([BMIM][PF6])中进行自组装, 通过激光粒度分析仪(DLS)和透射电子显微镜(TEM)研究了聚合物在离子液体中自组装的胶束尺寸和结构形态. 当PSt的链段长度一定时, 胶束的形状主要依赖于PAA链的长度. 当PAA链段较长时, 胶束呈球形; 当PAA链段较短时, 则变成不规则的花生状胶束.     

Synthesis and characterization of poly（phthalazinone ether nitrile） （PPEN）-polydimethylsiloxane （PDMS） block copolymers

Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.     

Three-dimensionally ordered porous membranes prepared via self-assembly and reverse micelle formation from well-defined amphiphilic block copolymers

Block copolymers of poly(pentafluorostyrene) (PFS) and poly(tert-butyl acrylate) (PtBA), or PFS-b-PtBA copolymers, were synthesized via consecutive atom transfer radical polymerizations (ATRPs). Amphiphilic block copolymers of PFS and poly(acrylic acid) (PFS-b-PAAC copolymers) were prepared via hydrolysis of the corresponding PFS-b-PtBA copolymers. The chemical structure and composition of the PFS-b-PtBA and PFS-b-PAAC block copolymers were studied by nuclear magnetic resonance (NMR) spectroscopy, themogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The amphiphilic PFS-b-PAAC copolymers were cast into porous membranes by phase inversion in aqueous media. The surface and cross-sectional morphology of the PFS-b-PAAC membranes were studied by scanning electron microscopy (SEM). Membranes with well-defined pores of sizes in the micrometer range were obtained as a result of inverse micelle formation. The pH of the aqueous media for phase inversion and the PAAC content in the PFS-b-PAAC copolymers could be used to adjust the pore size of the membranes.     

TUNED MECHANICAL PROPERTIES ACHIEVED BY VARYING POLYMER STRUCTURE — KNOWLEDGE THAT GENERATES NEW MATERIALS FOR TISSUE ENGINEERING

By changing both the monomer composition and the polymer structure, we have varied the mechanical properties of resorbable polymers. The polymers were synthesized by ring-opening polymerization using L-lactide （LLA）, ε-caprolactone （εCL）, trimethylene carbonate （TMC） and 1,5-dioxepan-2-one （DXO） as monomers. Well-defined triblock copolymers, microblock copolymers and networks have been evaluated, and comparisons between them show that it is possible to tune the mechanical properties. Triblock copolymers with an amorphous middle block of poly（1,5-dioxepan-2- one） （PDXO） and semi-crystalline end-blocks of poly（ε-caprolactone） （PCL） were stronger and had a higher strain at break than triblock copolymers with poly（L-lactide） （PLLA） as end-blocks. Polymers with both DXO and TMC in the amorphous middle-block and PLLA as end-blocks showed a lower stress at break, but the material gained elasticity, a property which is very valuable in tissue engineering. Mechanical properties of networks, synthesized by a novel method, containing PDXO and PCL are also presented. Although it is difficult to compare them with the uncross-linked polymers, this is an additional way to modify and widen the properties.     

Double-Gyroid Network Morphology in Tapered Diblock Copolymers

We report the formation of a double-gyroid network morphology in normal-tapered poly(isoprene-b-isoprene/styrene-b-styrene) [P(I-IS-S)] and inverse-tapered poly(isoprene-b- styrene/isoprene-b-styrene) [P(I-SI-S)] diblock copolymers. Our tapered diblock copolymers with overall poly(styrene) volume fractions of 0.65 (normal-tapered) and 0.67 (inverse-tapered), and tapered regions comprising 30 volume percent of the total polymer, were shown to self-assemble into the double-gyroid network morphology through a combination of small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The block copolymers were synthesized by anionic polymerization, where the tapered region between the pure poly(isoprene) and poly(styrene) blocks was generated using a semi-batch feed with programmed syringe pumps. The overall composition of these tapered copolymers lies within the expected network-forming region for conventional poly(isoprene-b-styrene) [P(I-S)] diblock copolymers. Dynamic mechanical analysis (DMA) clearly demonstrated that the order-disorder transition temperatures (T(ODT)'s) of the network-forming tapered block copolymers were depressed when compared to the T(ODT) of their non-tapered counterpart, with the P(I-SI-S) showing the greater drop in T(ODT). These results indicate that it is possible to manipulate the copolymer composition profile between blocks in a diblock copolymer, allowing significant control over the T(ODT), while maintaining the ability to form complex network structures.     

含氟嵌段共聚物离聚体的合成表征及其性能研究

嵌段共聚物离聚体具有独特的形态和固体及溶液性质 ,在热塑性弹性体、极性材料与非极性材料共混相溶剂和粘度调节剂等领域具有十分广阔的应用前景 ,引起了人们的普遍关注 .文献报道较多的是聚苯乙烯 乙烯 丙烯[1] 、聚苯乙烯 乙烯 丁烯 苯乙烯[2 ] 、聚苯乙烯 异丁烯 苯乙烯[3 ] 等共聚物中 ,聚苯乙烯链段部分磺化后所得离聚体的合成与性质研究 .众所周知 ,含氟聚合物具有低表面能和高表面活性等特性 ,因而将含氟基团引入到嵌段共聚物离聚体中有望开发出一种新型的特殊功能材料 .原子转移自由基聚合 (ATRP)自 1 995年问世以来 ,已成功…     

ANTIFOULING PROPERTIES OF POLYVINYL CHLORIDE) MEMBRANES MODIFIED BY AMPHIPHILIC COPOLYMERS P(MMA-A-MAA)

Three well-defined diblock copolymers of poly(methyl methacrylate-b-methacrylic acid)(P(MMA-b-MAA))were synthesized using atom transfer radical polymerization method and varying poly(methacrylic acid)(PMAA)chain lengths. These copolymers were blended with PVC to fabricate porous membranes via phase inversion process.Membrane morphologies were observed by scanning electron microscopy(SEM),and chemical composition changes of the membrane surfaces were measured by X-ray photoelectron spectroscopy(XPS).Static and dynamic protein adsorption experiments were used to evaluate antifouling properties of the blend membranes.It was found that,the blend membranes containing longer PMAA arm length showed lower static protein adsorption,higher water permeation flux and better protein solution flux recovery.     

PVP两亲性嵌段共聚物对超螺旋DNA的裂解活性

以PVP-Cl为大分子引发剂,经ATRP聚合制备得到窄分子量分布、结构可控的含不同亲水/疏水比例的两亲性聚N-乙烯基吡咯烷酮-b-聚N-甲基丙烯酰基-N＇-Boc-色氨酸酰胺基硫脲嵌段共聚物（PVP-b-PTrpAMT-I,II,III）.1H NMR核磁共振、GPC-MALLS以及凝胶电泳对嵌段共聚物的结构进行了表征...     

Block Copolymerization of Vinyl Monomers with Macroiniferer

Abstract

Block copolymers composed of a polyether, such as poly(oxytetra-methylene), and vinyl polymers, such as polystyrene, poly(methyl methacrylate), poly(butyl acrylate), and poly(vinyl acetate), were prepared by photopolymerizations of vinyl monomers initiated with a polyether macroiniferter, α - (diethyldithiocarbamylacetyl) - ω - (diethyldithiocar-bamylacetoxy)-poly(oxytetramethylene). ESR spectroscopy and end-group analysis of diethyldithiocarbamyl indicated that block copolymers should be predominantly ABA-type copolymers. The block copolymers were characterized in detail by NMR, GPC, and DSC analysis.     

含磺酸基团的含氟嵌段共聚物的溶液性能及其应用

利用原子转移自由基聚合以及随后的磺化反应合成了一系列具有不同含氟量和磺化度的嵌段共聚物P(SSt b FNEMA) (PSSF) .通过溶液粘度和表面张力的测定 ,研究了该含氟嵌段共聚物独特的溶液行为 .实验结果表明 ,PSSF能显著降低N 甲基吡咯烷酮溶液的表面张力 .然而 ,与N 甲基吡咯烷酮溶液的表面性能不同 ,PSSF不能显著地降低水溶液的表面张力 ;当PSSF中和成钠盐后 ,水溶液的表面张力趋于一致 .进一步通过TEM、1 H NMR考察了PSSF在不同溶液中的形态 ,发现PSSF在水溶液中以核壳结构存在 ,而在N 甲基吡咯烷酮溶液中主要以胶束的形式存在 .初步考察了PSSF对聚氨酯脲 丙烯酸酯 (PUA)复合水分散液的改性效果 ,发现只需加入少量的PSSF ,就可使PUA膜的吸水率从原来的 10wt%下降到 4wt% .     

Antibacterial behaviour of quaternized poly(vinyl chloride)-g-poly(4-vinyl pyridine) graft copolymers

Amphiphilic graft copolymers consisting of poly(vinyl chloride)(PVC) main chains and poly(4-vinyl pyridine)(P4VP) side chains were synthesized via atom transfer radical polymerization(ATRP) using direct initiation of chlorine atoms. The successful synthesis of PVC-g-P4 VP graft copolymers was confirmed by Fourier transform infrared spectroscopy(FTIR) and proton nuclear magnetic resonance(1H-NMR). Transmission electron microscope(TEM) and small angle X-ray scattering(SAXS) analysis showed that PVC-g-P4 VP exhibited microphase-separated, ordered structure with 37.6 nm of domain spacing, which was not observed in neat PVC. For antibacterial applications, the tertiary nitrogen atoms of PVC-gP4 VP was quaternized using 1-bromohexane, as confirmed by FTIR measurements. Bacteria including Escherichia coli(E. coli), Staphylococcus aureus(S. aureus), Bacillus cereus(B. cereus), and Pseudomonas aeruginosa(P. aeruginosa) were completely killed in 24 h on the quaternized PVC-g-P4VP(46% grafting) surface, indicating its excellent antibacterial behavior while it showed to be cytotoxic to mammalian cell.     

Crystallization behavior, thermal property and biodegradation of poly(3-hydroxybutyrate)/poly(ethylene glycol) grafting copolymer

The poly(3-hydroxybutyrate)(PHB)/poly(ethylene glycol)(PEG) grafting copolymer was successfully prepared by PHB and acrylate groups ended PEGM using AIBN as initiator. The crystallization behavior, thermal stability and environmental biodegradability of PHB/PEG grafting copolymers were investigated with differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), wide angle X-ray diffraction (WAXD), scanning electron microscopy (SEM), and Biodegradation test in vitro. In the results, all the grafting copolymers were found to show the X-ray diffraction arising from the PHB crystal lattice, while none of the PEG crystallized peaks could be found even though the graft percent reached 20%. This result indicated that PEG molecules were randomly grafted onto PHB chain. The thermal properties measured by DSC showed that the melting temperature(T_m) and glass transition temperature (T_g) were both shifted to lower temperature with the graft percent increasing, and this broadened the narrow processability window of PHB. According to TGA results, the thermal stability of the grafting copolymers is not changed compared to pure PHB. From the biodegradation test, it could be concluded that degradation occurred gradually from the surface to the inside and that the degradation rate could be adjusted by the PEG grafting ratio. In another words, the biodegradation profiles of PHB/PEG grafting copolymer can be controlled. These properties make PHB/PEG grafting copolymer have promising potential applications especially in agriculture fields.     

聚对二氧环己酮/聚乙二醇多嵌段共聚物的合成与表征

首先合成双端羟基的聚对二氧环己酮预聚物(PPDO)和双端羧基的聚乙二醇预聚物(PEG),然后以丁二酸酐/二环己基碳二亚胺(DCC)将PPDO与PEG偶联共聚,得到PPDO/PEG多嵌段共聚物.通过1H-NMR和GPC表征了聚合物的结构和分子量.采用差示扫描量热法(DSC)和热重分析(TGA)研究了共聚物的结晶性能和热稳定性.用透析法制备了共聚物纳米粒子,并用动态光散射(DLS)表征了共聚物纳米粒子的粒径及分散度,结果表明,随着共聚物亲水链段PEG含量的增加,其纳米粒子更易形成,粒子粒径随共聚物分子量增大而增大.     

Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization

Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.     

Synthesis and Characterization of Poly(p-phenylene benzobisoxazole)/Poly(pyridobisimidazole) Block Copolymers

Poly(p-phenylene benzobisoxazole)/poly(pyridobisimidazole) block copolymers (PBO-b-PIPD) were prepared by introducing poly(pyridobisimidazole) (PIPD) moieties into the main chains of poly(p-phenylene benzobisoxazole) (PBO) in order to enhance its photostability. PBO and copolymer fibers were directly prepared from the polymerization solutions by dry-jet wet-spinning. Chemical structures and molecular chains arrangement of the block copolymers were characterized by Fourier transform infrared (FTIR) spectroscopy, solid-state ¹³C-NMR and wide angle X-ray diffraction (WAXD). Thermal stability of the copolymers was investigated by thermogravimetric analysis (TGA) in nitrogen. Thin films of PBO and copolymers were cast from methanesulfonic acid (MSA) solutions. Both the films and fibers were exposed to UV light to determine their photostability. Changes in the chemical structures and surface morphologies of the films were characterized by FTIR spectra and scanning electronic microscopy (SEM), respectively. After UV light exposure, the retention of strength for copolymer fibers is improved compared to PBO fibers. The results revealed that copolymers suffered less photodegradation in comparison with homopolymer. The mechanism for the improved photostability of the copolymers was discussed.     

三臂支化PLLA-PDLA嵌段共聚物的合成及立构复合结晶行为

以三羟甲基乙烷为起始剂, 开环聚合L-丙交酯(LLA), 合成三臂支化左旋聚乳酸(PLLA)预聚物. 采用端基活化技术对预聚物进行端羟基活化, 再与D-丙交酯(DLA)进行开环聚合, 合成了不同分子量的三臂支化左旋聚乳酸-右旋聚乳酸(PLLA-PDLA)嵌段共聚物. 采用核磁共振谱和凝胶渗透色谱等对样品的结构和分子量进行测试, 结果表明,合成的嵌段共聚物链结构具有链段立构规整度和高分子量的特点; 通过调节DLA单体与PLLA预聚物的投料比, 可实现对PLLA-PDLA嵌段共聚物的序列结构调控. 差示扫描量热仪和广角X 射线衍射结果表明, 三臂支化PLLA-PDLA嵌段共聚物的异构体分子间生成立构复合晶体, 其熔点高于200℃; 共聚物的嵌段序列结构对材料的凝聚态转变行为有很大的影响.