高分辨率合成孔径雷达图像舰船目标几何特征提取方法

针对高分辨率合成孔径雷达图像设计了一种舰船目标几何特征提取算法.通过视觉注意机制检测目标区域的算法,通过频谱残差视觉显著计算模型求取显著图,完成显著区域的检测以实现舰船目标的初步定位,基于获得的视觉显著图采用最大熵算法完成阈值分割筛选出舰船区域.在提取的舰船切片的基础上,采用针对几何特征的提取算法,经图像预处理、方位角估计、旋转获取最佳表征舰船目标几何轮廓的外接矩形,相对有效准确地提取几何特征;最后,采用典型的TerraSAR-X数据进行仿真实验.结果表明,与传统方法相比,本文提出的频谱残差视觉模型完成合成孔径雷达图像舰船切片的区域分割能够有效降低虚警率,舰船目标的检测速度提高了25%~50%.该方法能够快速稳定地提取舰船目标的几何特征,也更加符合实际高分辨率图像舰船目标检测的应用需求.     

复杂环境下运动目标偏振成像检测方法研究

针对低对比度、低信噪比等复杂环境下运动目标检测失检率较高的问题,提出了基于稳定性主成分寻踪的运动目标偏振成像检测方法。首先将预处理后的连续帧偏振图像组合成一个矩阵,依据帧间图像信息相关性,建立了稳定性主成分寻踪数学模型,将该矩阵分解成低秩、稀疏,噪声三部分,其中稀疏矩阵包含了帧间目标信息;再以低秩矩阵核范数与稀疏矩阵1范数的和为目标函数,利用增广拉格朗日乘子法求得目标函数值最小时的稀疏矩阵;最后采用马尔科夫随机场滤除稀疏矩阵中的噪声。实验结果表明,该方法对复杂环境有很好的适应能力,且检测准确率优于其他算法。     

基于旋转不变特征的遥感图像飞机目标检测方法

为了解决在动态飞机监管系统中,遥感图像飞机多目标检测准确率低的问题,提出一种目标检测方法.首先引入两种全新的旋转不变性特征,中心质点角与H向量;接着对遥感飞机图像进行滑窗检测,分别计算每一重叠块的中心质点角集、H向量相关系数;根据模板特征匹配度设计了相应的得分系统,再结合非极大值抑制等算法确定检测窗口内是否存在飞机.用不同场景下的遥感图像飞机进行多目标检测实验,结果表明该方法平均F1分数达到90%以上,相比传统方法,召回率与查准率更高,且适用范围更为广泛.     

海天复杂背景下红外目标的检测跟踪算法

在分析海天复杂背景下红外目标图像特征的基础上,提出适合该环境的红外目标检测算法.该算法采用行均值相减的方法抑制海平面非线性温度场的影响,并进行中值滤波处理.对于更加复杂的环境,选用数学形态滤波法抑制背景中的大面积云团或海浪,从而确定出目标区域来进行目标图像的分割及增强.同时,综合使用图像捕获区域指定、运动目标检测法、弱目标的增强提取、记忆外推功能、数据融合加权跟踪方法,来保证在海天复杂背景下红外目标的可靠跟踪.实验表明,该算法能较好地处理海天复杂背景下红外目标的检测,且算法易于硬件实现,提高目标检测的实时效率.     

复杂动背景下的“低小慢”目标检测技术

为了在复杂天空背景下检测出低空慢速小目标,本文研究了"低小慢"目标的视觉显著性区域特征,融合扫描线填充算法,提出了一种动态背景下"低小慢"目标自适应实时检测技术。首先,根据图像的亮度对比度获取显著性图。接着,使用形态学梯度提取显著性特征,通过三帧差分算法得到种子点。然后,使用扫描线填充算法进行生长,结合提出的自适应双高斯算法分割出前景。最后,根据候选目标的面积占比变化、质心距离变化、宽高比差异剔除虚假目标,完成检测。为了验证算法的有效性,本文选取了7组复杂天空背景的视频序列进行测试,并与其他优秀检测算法进行了对比。结果表明,本文提出的算法对运动目标检测的平均运行时间为0. 040 9 s,平均检测准确率为89. 97%,相比于其他算法的平均运算时间减少了0. 35 s,检测的平均准确率提高了24. 5%。算法在复杂背景下具有较好的稳定性和较强的鲁棒性。     

基于相关滤波器的红外弱小目标检测算法EI北大核心CSCD

针对复杂背景下红外图像中低信噪比弱小目标实时检测问题,提出一种基于相关滤波器的红外弱小目标检测算法。该算法将红外目标检测转化为模式分类问题,在离线训练阶段,利用二维高斯模型构造红外小目标训练集,在此基础上训练得到对目标背景具有区分能力的相关滤波器,在线检测阶段,利用滤波器对图像分块进行滤波操作,目标和背景的滤波响应有着显著的差异,最后生成整幅图像的滤波响应置信图以此来判断图像中是否包含目标及其具体位置。在单帧单目标图像、序列图像多目标检测实验结果表明,与经典检测算法相比,所提方法不仅具有更高检测性能,有效降低了虚警概率,而且具有较好的实时性,适用于复杂背景条件下弱小目标的实时检测。     

动态背景下运动目标检测与跟踪研究

主要研究动态背景下的运动目标检测和跟踪问题。背景补偿差分法是一种常用的动态背景下运动目标检测算法,但检测到的目标轮廓要比其真实轮廓大,检测结果不准确且算法复杂度较高。主动轮廓模型在图像分割和目标提取过程中具有拓扑结构变化灵活性,对数值计算方案的设计更加方便、有效,据此提出一种基于改进C-V模型和卡尔曼滤波的算法,用来检测和跟踪动态背景下的运动目标。提出的算法利用C-V模型曲线演化检测和跟踪目标,使C-V模型在目标的边缘处收敛。结合卡尔曼滤波预测运动目标下一帧位置,从而实现对运动目标轮廓的跟踪。实验结果表明,该方法可以对动态背景下运动目标进行精确的检测与跟踪。     

拉普拉斯约束低秩表示的高光谱图像异常检测

伴随高光谱图像的广泛使用,高光谱图像技术得到长足的发展,其中高光谱图像异常检测技术越发受到重视。为了解决传统高光谱图像异常检测技术的实用性和检测效果不佳的问题,提出一种新颖的低秩表示检测算法。对于高光谱图像,大部分背景像元均可以被少量主要的背景像元组合近似地表示,且它们的表示系数将会位于低秩的空间中。在剩下无法被主要背景像元表示的稀疏部分中存在着异常像元,则可以被检测算法提取出来。在低秩表示中,背景像元字典的构建将会影响高光谱图像中背景像元的表示。如直接从现有高光谱图像中提取背景像元构建字典,会导致异常像元对背景像元字典的污染。而利用待检测高光谱图像观测数据和由光谱组成原理可合成的潜在未观测数据来构建背景像元字典,提取出背景像元的主要特征,有利于更好地分离出稀疏异常像元的信息。并且高光谱图像数据存在高维几何结构特点,通过引入拉普拉斯矩阵来约束空间中局部相似的像元对于待检测像元的表示作用,获得更接近于真实的表示系数。实验结果分别在仿真数据和真实数据上验证,与传统方法相比,提出的方法通过有效地突出异常像元提高了检出率和抑制了背景像元,降低了误检率。     

基于轮廓模型的单应识别优化算法

提出了基于轮廓模型的复杂背景弱纹理目标单应优化方法。算法在随机抽样一致(RANSAC)框架下实现了初始变换的求解,通过优化法向距离实现了单应的优化求解。为了快速稳健地求解初始单应,算法随机选取三条满足一定几何约束的直线段进行假设变换关系的求解,通过选取使得投影误差最小的变换关系作为单应初值。为了解决复杂背景条件下模型-图像对应错误引起的优化失败问题,在模型-图像点匹配阶段,算法为每个采样点保留多个图像点对应,同时在对样本点进行加权过程中,该算法综合考虑了样本点自身的属性和样本点同周围点的关系,有效提高了稳健性。实验结果表明:该方法能够实现复杂场景目标单应的优化求解,相比传统的方法,该方法能够有效克服复杂背景的干扰,实现弱纹理目标单应的稳健估计。     

基于相关滤波器的红外弱小目标检测算法

针对复杂背景下红外图像中低信噪比弱小目标实时检测问题,提出一种基于相关滤波器的红外弱小目标检测算法。该算法将红外目标检测转化为模式分类问题,在离线训练阶段,利用二维高斯模型构造红外小目标训练集,在此基础上训练得到对目标背景具有区分能力的相关滤波器,在线检测阶段,利用滤波器对图像分块进行滤波操作,目标和背景的滤波响应有着显著的差异,最后生成整幅图像的滤波响应置信图以此来判断图像中是否包含目标及其具体位置。在单帧单目标图像、序列图像多目标检测实验结果表明,与经典检测算法相比,所提方法不仅具有更高检测性能,有效降低了虚警概率,而且具有较好的实时性,适用于复杂背景条件下弱小目标的实时检测。     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.