Ni(P(Ph)2N(C6H4X)2)2]2+ complexes as electrocatalysts for H2 production: effect of substituents, acids, and water on catalytic rates

A series of mononuclear nickel(II) bis(diphosphine) complexes [Ni(P(Ph)(2)N(C6H4X)(2))(2)](BF(4))(2) (P(Ph)(2)N(C6H4X)(2) = 1,5-di(para-X-phenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane; X = OMe, Me, CH(2)P(O)(OEt)(2), Br, and CF(3)) have been synthesized and characterized. X-ray diffraction studies reveal that [Ni(P(Ph)(2)N(C6H4Me)(2))(2)](BF(4))(2) and [Ni(P(Ph)(2)N(C6H4OMe)(2))(2)](BF(4))(2) are tetracoordinate with distorted square planar geometries. The Ni(II/I) and Ni(I/0) redox couples of each complex are electrochemically reversible in acetonitrile with potentials that are increasingly cathodic as the electron-donating character of X is increased. Each of these complexes is an efficient electrocatalyst for hydrogen production at the potential of the Ni(II/I) couple. The catalytic rates generally increase as the electron-donating character of X is decreased, and this electronic effect results in the favorable but unusual situation of obtaining higher catalytic rates as overpotentials are decreased. Catalytic studies using acids with a range of pK(a) values reveal that turnover frequencies do not correlate with substrate acid pK(a) values but are highly dependent on the acid structure, with this effect being related to substrate size. Addition of water is shown to dramatically increase catalytic rates for all catalysts. With [Ni(P(Ph)(2)N(C6H4CH2P(O)(OEt)2)(2))(2)](BF(4))(2) using [(DMF)H](+)OTf(-) as the acid and with added water, a turnover frequency of 1850 s(-1) was obtained.     

Chromium(III) catalysed ethylene tetramerization promoted by bis(phosphino)amines with an N-functionalized pendant

Several N-functionalized bis(phosphino)amine ligands with ether, thioether and pyridyl tethers [(R')2PN(R')P(R')2=PNP] () have been synthesized. They react with CrCl3(THF)3 in CH2Cl2 to give dinuclear chloro bridged Cr2(micro-Cl)2Cl4(PNP)2 () which converts to the corresponding mononuclear solvento complexes fac-CrCl3(PNP)(NCR) (). The structures of the ligand with R'=-(CH2)3SCH3 and R'=Ph, and the complexes with R=CH3 () and C2H5 (), R'=-(CH2)3SCH3 and R'=Ph) have been established by single-crystal X-ray crystallography. All ligands are active towards ethylene tetramerization in the presence of Cr(III) and excess MAO at 80 degrees C in toluene. The ligand with thioether pendant Et2PN(CH2CH2CH2SCH3)PEt2 () shows the highest selectivity (55% weight in liquid product distribution) towards 1-octene. Complexes and are active towards ethylene polymerization under thermal conditions.     

Mixed-valence nickel-iron dithiolate models of the [NiFe]-hydrogenase active site

A series of mixed-valence nickel-iron dithiolates is described. Oxidation of (diphosphine)Ni(dithiolate)Fe(CO)(3) complexes 1, 2, and 3 with ferrocenium salts affords the corresponding tricarbonyl cations [(dppe)Ni(pdt)Fe(CO)(3)](+) ([1](+)), [(dppe)Ni(edt)Fe(CO)(3)](+) ([2](+)) and [(dcpe)Ni(pdt)Fe(CO)(3)](+) ([3](+)), respectively, where dppe = Ph(2)PCH(2)CH(2)PPh(2), dcpe = Cy(2)PCH(2)CH(2)PCy(2), (Cy = cyclohexyl), pdtH(2) = HSCH(2)CH(2)CH(2)SH, and edtH(2) = HSCH(2)CH(2)SH. The cation [2](+) proved unstable, but the propanedithiolates are robust. IR and EPR spectroscopic measurements indicate that these species exist as C(s)-symmetric species. Crystallographic characterization of [3]BF(4) shows that Ni is square planar. Interaction of [1]BF(4) with P-donor ligands (L) afforded a series of substituted derivatives of type [(dppe)Ni(pdt)Fe(CO)(2)L]BF(4) for L = P(OPh)(3) ([4a]BF(4)), P(p-C(6)H(4)Cl)(3) ([4b]BF(4)), PPh(2)(2-py) ([4c]BF(4)), PPh(2)(OEt) ([4d]BF(4)), PPh(3) ([4e]BF(4)), PPh(2)(o-C(6)H(4)OMe) ([4f]BF(4)), PPh(2)(o-C(6)H(4)OCH(2)OMe) ([4g]BF(4)), P(p-tol)(3) ([4h]BF(4)), P(p-C(6)H(4)OMe)(3) ([4i]BF(4)), and PMePh(2) ([4j]BF(4)). EPR analysis indicates that ethanedithiolate [2](+) exists as a single species at 110 K, whereas the propanedithiolate cations exist as a mixture of two conformers, which are proposed to be related through a flip of the chelate ring. M?ssbauer spectra of 1 and oxidized S = 1/2 [4e]BF(4) are both consistent with a low-spin Fe(I) state. The hyperfine coupling tensor of [4e]BF(4) has a small isotropic component and significant anisotropy. DFT calculations using the BP86, B3LYP, and PBE0 exchange-correlation functionals agree with the structural and spectroscopic data, suggesting that the SOMOs in complexes of the present type are localized in an Fe(I)-centered d(z(2)) orbital. The DFT calculations allow an assignment of oxidation states of the metals and rationalization of the conformers detected by EPR spectroscopy. Treatment of [1](+) with CN(-) and compact basic phosphines results in complex reactions. With dppe, [1](+) undergoes quasi-disproportionation to give 1 and the diamagnetic complex [(dppe)Ni(pdt)Fe(CO)(2)(dppe)](2+) ([5](2+)), which features square-planar Ni linked to an octahedral Fe center.     

Hydrogen oxidation and production using nickel-based molecular catalysts with positioned proton relays

Highly efficient electrocatalysts for both hydrogen evolution and hydrogen oxidation have been designed, synthesized, and characterized. The catalysts in their resting states are air-stable, mononuclear nickel(II) complexes containing cyclic diphosphine ligands with nitrogen bases incorporated into the ligand backbone. X-ray diffraction studies have established that the cation of [Ni(P(Ph)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2), 6a, (where P(Ph)(2)N(Ph)(2) is 1,3,5,7-tetraphenyl-1,5-diaza-3,7-diphosphacyclooctane) is a trigonal bipyramid with bonds to four phosphorus atoms of the two bidentate diphosphine ligands and the nitrogen atom of an acetonitrile molecule. Two of the six-membered rings formed by the diphosphine ligands and Ni have boat conformations with an average Ni- - -N distance to the two pendant bases of 3.4 A. The cation of [Ni(P(Cy)(2)N(Bz)(2))(2)](BF(4))(2), 6b, (where Cy = cyclohexyl and Bz = benzyl) is a distorted square planar complex. For 6b, all four six-membered rings formed upon coordination of the diphosphine ligands to the metal are in the boat form. In this case, the average Ni- - -N distance to the pendant base is 3.3 A. Complex 6a is an electrocatalyst for hydrogen production in acidic acetonitrile solutions, and compound 6b is an electrocatalyst for hydrogen oxidation in basic acetonitrile solutions. It is demonstrated that the high catalytic rates observed with these complexes are a result of the positioning of the nitrogen base so that it plays an important role in the formation and cleavage of the H-H bond.     

Active-site models for the nickel-iron hydrogenases: effects of ligands on reactivity and catalytic properties

Described are new derivatives of the type [HNiFe(SR)(2)(diphosphine)(CO)(3)](+), which feature a Ni(diphosphine) group linked to a Fe(CO)(3) group by two bridging thiolate ligands. Previous work had described [HNiFe(pdt)(dppe)(CO)(3)](+) ([1H](+)) and its activity as a catalyst for the reduction of protons (J. Am. Chem. Soc. 2010, 132, 14877). Work described in this paper focuses on the effects on properties of NiFe model complexes of the diphosphine attached to nickel as well as the dithiolate bridge, 1,3-propanedithiolate (pdt) vs 1,2-ethanedithiolate (edt). A new synthetic route to these Ni-Fe dithiolates is described, involving reaction of Ni(SR)(2)(diphosphine) with FeI(2)(CO)(4) followed by in situ reduction with cobaltocene. Evidence is presented that this route proceeds via a metastable μ-iodo derivative. Attempted isolation of such species led to the crystallization of NiFe(Me(2)pdt)(dppe)I(2), which features tetrahedral Fe(II) and square planar Ni(II) centers (H(2)Me(2)pdt = 2,2-dimethylpropanedithiol). The new tricarbonyls prepared in this work are NiFe(pdt)(dcpe)(CO)(3) (2, dcpe = 1,2-bis(dicyclohexylphosphino)ethane), NiFe(edt)(dppe)(CO)(3) (3), and NiFe(edt)(dcpe)(CO)(3) (4). Attempted preparation of a phenylthiolate-bridged complex via the FeI(2)(CO)(4) + Ni(SPh)(2)(dppe) route gave the tetrametallic species [(CO)(2)Fe(SPh)(2)Ni(CO)](2)(μ-dppe)(2). Crystallographic analysis of the edt-dcpe compund [2H]BF(4) and the edt-dppe compound [3H]BF(4) verified their close resemblance. Each features pseudo-octahedral Fe and square pyramidal Ni centers. Starting from [3H]BF(4) we prepared the PPh(3) derivative [HNiFe(edt)(dppe)(PPh(3))(CO)(2)]BF(4) ([5H]BF(4)), which was obtained as a ～2:1 mixture of unsymmetrical and symmetrical isomers. Acid-base measurements indicate that changing from Ni(dppe) (dppe = Ph(2)PCH(2)CH(2)PPh(2)) to Ni(dcpe) decreases the acidity of the cationic hydride complexes by 2.5 pK(a)(PhCN) units, from ～11 to ～13.5 (previous work showed that substitution at Fe leads to more dramatic effects). The redox potentials are more strongly affected by the change from dppe to dcpe, for example the [2](0/+) couple occurs at E(1/2) = -820 for [2](0/+) vs -574 mV (vs Fc(+/0)) for [1](0/+). Changes in the dithiolate do not affect the acidity or the reduction potentials of the hydrides. The acid-independent rate of reduction of CH(2)ClCO(2)H by [2H](+) is about 50 s(-1) (25 °C), twice that of [1H](+). The edt-dppe complex [2H](+) proved to be the most active catalyst, with an acid-independent rate of 300 s(-1).     

Studies of a series of [Ni(P(R)2N(Ph)2)2(CH3CN)]2+ complexes as electrocatalysts for H2 production: substituent variation at the phosphorus atom of the P2N2 ligand

A series of [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes containing the cyclic diphosphine ligands [P(R)(2)N(Ph)(2) = 1,5-diaza-3,7-diphosphacyclooctane; R = benzyl (Bn), n-butyl (n-Bu), 2-phenylethyl (PE), 2,4,4-trimethylpentyl (TP), and cyclohexyl (Cy)] have been synthesized and characterized. X-ray diffraction studies reveal that the cations of [Ni(P(Bn)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) and [Ni(P(n-Bu)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) have distorted trigonal bipyramidal geometries. The Ni(0) complex [Ni(P(Bn)(2)N(Ph)(2))(2)] was also synthesized and characterized by X-ray diffraction studies and shown to have a distorted tetrahedral structure. These complexes, with the exception of [Ni(P(Cy)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2), all exhibit reversible electron transfer processes for both the Ni(II/I) and Ni(I/0) couples and are electrocatalysts for the production of H(2) in acidic acetonitrile solutions. The heterolytic cleavage of H(2) by [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes in the presence of p-anisidine or p-bromoaniline was used to determine the hydride donor abilities of the corresponding [HNi(P(R)(2)N(Ph)(2))(2)](BF(4)) complexes. However, for the catalysts with the most bulky R groups, the turnover frequencies do not parallel the driving force for elimination of H(2), suggesting that steric interactions between the alkyl substituents on phosphorus and the nitrogen atom of the pendant amines play an important role in determining the overall catalytic rate.     

Carboxylate coordination chemistry of a mononuclear Ni(II) center in a hydrophobic or hydrogen bond donor secondary environment: relevance to acireductone dioxygenase

A series of Ni(II) carboxylate complexes, supported by a chelate ligand having either secondary hydrophobic phenyl groups (6-Ph2TPA, N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine) or hydrogen bond donors (bnpapa, N,N-bis((6-neopentylamino-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine), have been prepared and characterized. X-ray crystallographic studies of [(6-Ph2TPA)Ni(O2C(CH2)2SCH3)]ClO4.CH2Cl2 (4.CH2Cl2) and [(6-Ph2TPA)Ni(O2CCH2SCH3)]ClO(4).1.5CH2Cl2 (5.1.5CH2Cl2) revealed that each complex contains a distorted octahedral Ni(II) center and a bidentate carboxylate ligand. A previously described benzoate complex ([(6-Ph2TPA)Ni(O2CPh)]ClO4 (3)) has similar structural characteristics. Recrystallization of dry powdered samples of 3, 4.0.5CH2Cl2, and 5 from wet organic solvents yielded a second series of crystalline Ni(II) carboxylate complexes having a coordinated monodentate carboxylate ligand ([(6-Ph2TPA)Ni(H2O)(O2CPh)]ClO4 (6), [(6-Ph2TPA)Ni(H2O)(O2C(CH2)2SCH3)]ClO4.0.2CH2Cl2 (7.0.2CH2Cl2), [(6-Ph2TPA)Ni(H2O)(O2CCH2SCH3)]ClO4 (8)) which is stabilized by a hydrogen-bonding interaction with a Ni(II)-bound water molecule. In the cationic portions of 7.0.2CH2Cl2 and 8, weak CH/pi interactions are also present between the methylene units of the carboxylate ligands and the phenyl appendages of the 6-Ph2TPA ligands. A formate complex of the formulation [(6-Ph2TPA)Ni(H2O)(O2CH)]ClO4 (9) was isolated and characterized. The mononuclear Ni(II) carboxylate complexes [(bnpapa)Ni(O2CPh)]ClO4 (10), [(bnpapa)Ni(O2C(CH2)2SCH3)]ClO4 (11), [(bnpapa)Ni(O2CCH2SCH3)]ClO4 (12), and [(bnpapa)Ni(O2CH)]ClO4 (13) were isolated and characterized. Two crystalline solvate forms of 10 (10.CH3CN and 10.CH2Cl2) were examined by X-ray crystallography. In both, the distorted octahedral Ni(II) center is ligated by a bidentate benzoate ligand, one Ni(II)-bound oxygen atom of which accepts two hydrogen bonds from the supporting bnpapa chelate ligand. Spectroscopic studies of 10(-13) suggest that all contain a bidentate carboxylate ligand, even after exposure to water. The combined results of this work enable the formulation of a proposed pathway for carboxylate product release from the active site Ni(II) center in acireductone dioxygenase.     

SYNTHESES AND MOLECULAR STRUCTURES OF THE ASYMMETRICAL DIPHOSPHINE LIGANDS AND THEIR Pt, Ni ORGANOMETALLIC COMPLEXES

In this paper, we report a novel two-step synthetic method of the symmetrical and asymmetrical diphosphine ligands 1, 2-bis(ditertbutylphosphino)ethane and 1, 2-bis(phenyltertbutylphosphino) ethane, and simultaneously establish a novel synthetic method of diphosphine ligand 1, 4-bis(phosphinocyclopentyl)butane with larger chelate ring. The former was prepared from the reaction of 1, 2-bis(dichlorophosphino)ethane with Grignard reagent andalkyl lithium, respectively, the latter from the reaction of 1, 4-di-Grignard reagent with PCl_3. Furthermore, a series of organometallic complexes of Pt, Ni containing diphosphine chelate ligand were prepared from the reaction of (COD) PtCl_2 complex with diphosphine. These complexes are very stable. Among these complexes, the molecular structures of (d(t-Bu)pe)-PtCl_2, (dPCypb)PtCl_2 and ((n-Bu) (PCyp))_2PtCl_2 complexes have been determined by X-ray diffraction method indicating they are novel complexes. The influence of diphosphine ligand on the molecular structure     

Coordinated olefins as incipient carbocations: catalytic codimerization of ethylene and internal olefins by a dicationic Pt(II)-ethylene complex

The coordinated ethylene molecule in the dicationic complex [(PNP)Pt(CH2=CH2)](BF4)2 (PNP = 2,6-bis(diphenylphosphinomethyl)pyridine) undergoes nucleophilic attack by free internal alkenes, giving the isolable complexes [(PNP)Pt(CH2=CHCH(Me)CMeRR'](BF4)2 (R, R' = H, Me) and providing a new effective pathway for a chemo- and regio-selective catalytic hydrovinylation reaction.     

Ni(Et2PCH2NMeCH2PEt2)2]2+ as a functional model for hydrogenases

The reaction of Et(2)PCH(2)N(Me)CH(2)PEt(2) (PNP) with [Ni(CH(3)CN)(6)](BF(4))(2) results in the formation of [Ni(PNP)(2)](BF(4))(2), which possesses both hydride- and proton-acceptor sites. This complex is an electrocatalyst for the oxidation of hydrogen to protons, and stoichiometric reaction with hydrogen forms [HNi(PNP)(PNHP)](BF(4))(2), in which a hydride ligand is bound to Ni and a proton is bound to a pendant N atom of one PNP ligand. The free energy associated with this reaction has been calculated to be -5 kcal/mol using a thermodynamic cycle. The hydride ligand and the NH proton undergo rapid intramolecular exchange with each other and intermolecular exchange with protons in solution. [HNi(PNP)(PNHP)](BF(4))(2) undergoes reversible deprotonation to form [HNi(PNP)(2)](BF(4)) in acetonitrile solutions (pK(a) = 10.6). A convenient synthetic route to the PF(6)(-) salt of this hydride involves the reaction of PNP with Ni(COD)(2) to form Ni(PNP)(2), followed by protonation with NH(4)PF(6). A pK(a) of value of 22.2 was measured for this hydride. This value, together with the half-wave potentials of [Ni(PNP)(2)](BF(4))(2), was used to calculate homolytic and heterolytic Ni-H bond dissociation free energies of 55 and 66 kcal/mol, respectively, for [HNi(PNP)(2)](PF(6)). Oxidation of [HNi(PNP)(2)](PF(6)) has been studied by cyclic voltammetry, and the results are consistent with a rapid migration of the proton from the Ni atom of the resulting [HNi(PNP)(2)](2+) cation to the N atom to form [Ni(PNP)(PNHP)](2+). Estimates of the pK(a) values of the NiH and NH protons of these two isomers indicate that proton migration from Ni to N should be favorable by 1-2 pK(a) units. Cyclic voltammetry and proton exchange studies of [HNi(depp)(2)](PF(6)) (where depp is Et(2)PCH(2)CH(2)CH(2)PEt(2)) are also presented as control experiments that support the important role of the bridging N atom of the PNP ligand in the proton exchange reactions observed for the various Ni complexes containing the PNP ligand. Similarly, structural studies of [Ni(PNBuP)(2)](BF(4))(2) and [Ni(PNP)(dmpm)](BF(4))(2) (where PNBuP is Et(2)PCH(2)N(Bu)CH(2)PEt(2) and dmpm is Me(2)PCH(2)PMe(2)) illustrate the importance of tetrahedral distortions about Ni in determining the hydride acceptor ability of Ni(II) complexes.     

First row divalent transition metal complexes of aryl-appended tris((pyridyl)methyl)amine ligands: syntheses, structures, electrochemistry, and hydroxamate binding properties

Divalent manganese, cobalt, nickel, and zinc complexes of 6-Ph(2)TPA (N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-Ph(2)TPA)Mn(CH(3)OH)(3)](ClO(4))(2) (1), [(6-Ph(2)TPA)Co(CH(3)CN)](ClO(4))(2) (2), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (3), [(6-Ph(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (4)) and 6-(Me(2)Ph)(2)TPA (N,N-bis((6-(3,5-dimethyl)phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; [(6-(Me(2)Ph)(2)TPA)Ni(CH(3)CN)(2)](ClO(4))(2) (5) and [(6-(Me(2)Ph)(2)TPA)Zn(CH(3)CN)](ClO(4))(2) (6)) have been prepared and characterized. X-ray crystallographic characterization of 1A.CH(3)()OH and 1B.2CH(3)()OH (differing solvates of 1), 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN revealed mononuclear cations with one to three coordinated solvent molecules. In 1A.CH(3)()OH and 1B.2CH(3)()OH, one phenyl-substituted pyridyl arm is not coordinated and forms a secondary hydrogen-bonding interaction with a manganese bound methanol molecule. In 2.2CH(3)()CN, 3.CH(3)()OH, 4.2CH(3)()CN, and 6.2.5CH(3)()CN, all pyridyl donors of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands are coordinated to the divalent metal center. In the cobalt, nickel, and zinc derivatives, CH/pi interactions are found between a bound acetonitrile molecule and the aryl appendages of the 6-Ph(2)TPA and 6-(Me(2)Ph)(2)TPA ligands. (1)H NMR spectra of 4 and 6 in CD(3)NO(2) solution indicate the presence of CH/pi interactions, as an upfield-shifted methyl resonance for a bound acetonitrile molecule is present. Examination of the cyclic voltammetry of 1-3 and 5 revealed no oxidative (M(II)/M(III)) couples. Admixture of equimolar amounts of 6-Ph(2)TPA, M(ClO(4))(2).6H(2)O, and Me(4)NOH.5H(2)O, followed by the addition of an equimolar amount of acetohydroxamic acid, yielded the acetohydroxamate complexes [((6-Ph(2)TPA)Mn)(2)(micro-ONHC(O)CH(3))(2)](ClO(4))(2) (8), [(6-Ph(2)TPA)Co(ONHC(O)CH(3))](ClO(4))(2) (9), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))](ClO(4))(2) (10), and [(6-Ph(2)TPA)Zn(ONHC(O)CH(3))](ClO(4))(2) (11), all of which were characterized by X-ray crystallography. The Mn(II) complex 8.0.75CH(3)()CN.0.75Et(2)()O exhibits a dinuclear structure with bridging hydroxamate ligands, whereas the Co(II), Ni(II), and Zn(II) derivatives all exhibit mononuclear six-coordinate structures with a chelating hydroxamate ligand.     

Self-assembled polynuclear clusters derived from some flexible polydentate dihydrazide ligands

Polynuclear manganese(II), cobalt(II)/(III), iron(II)/(III) and nickel(II) complexes of a group of flexible polydentate dihydrazone ligands, based on pyridine-2,6-dipicolinic (A), oxalic (B) and malonic (C) subunits are described. Structural details are reported for the linear dinuclear complexes [Ni2(2poap)2(H2O)2](NO3)4 . 2CH3OH . 2.5H2O (1), [Mn2(pttp)(NO3)2(CH3OH)2(H2O)2](NO3)2 . H2O (2) and [Mn2(mapttp)2(NO3)2(H2O)2](NO3)2 . 10H2O (3), a square tetranuclear complex [Co4(pttp)4]Br6 . 9H2O (4), a tetranuclear tetrahedral complex [Ni4(pttp)6](BF4)6F2 . 14H2O (7), and a mixed spin state tetranuclear Ni(II) complex [(2pyoap)2Ni4(CH3OH)4] . 1.5CH3OH (10), with a diamond-like arrangement of metal ions. The paramagnetic metal centers are well separated in each case, leading to weak antiferromagnetic coupling or non-existent spin exchange.     

Design and self-assembly of ditopic and tetratopic cavitand complexes

The self-assembly of open ditopic and tetratopic cavitand complexes has been investigated by using monofunctionalized cavitand ligands and suitable metal precursors. In the case of ditopic complexes, self-assembly protocols, leading exclusively to the formation of both thermodynamically stable cis-Pt square-planar complexes 8 and 9 and the kinetically inert fac-Re octahedral complex 14, have been elaborated. The use of cis-[Pt(CH3)CN)2Cl2] as metal precursor led to the formation of monotopic trans-10 and ditopic trans-11 cavitand complexes, while cis-[Pt(dmso)2Cl2] afforded both cis-13 and trans-11 isomers. The self-assembly of tetratopic cavitand complexes has been achieved by using mononuclear [Pd(CH3CN)4(BF4)2] and dinuclear [M2(tppb)(OTf)4] (19: M = Pt; 20: M = Pd) metal precursors. Only the tetratopic dinuclear complexes 21 and 22 were stable. The ligand configuration with two phosphorus and two cavitand ligands at the metal centers is the most appropriate to build tetratopic cavitand complexes with sufficient kinetic stability.     

An unsymmetrical tripodal ligand with NOS2-donor set: coordination chemistry with nickel(II) and zinc(II)

The synthesis of the novel tripodal ligand [N(CH2CH2CH2OH)(CH2CH2SH)2] H3-4 is reported. The aliphatic tetradentate ligand is equipped with an unsymmetrical NOS2 donor set. It reacts with Ni(OAc)2 x 4H2O or Zn(BF4)2 x xH2O to give the complexes [Ni(H-4)]2 5 and [Zn(H-4)]4 6, respectively. The molecular structures of 5 and 6 have been determined by X-ray diffraction. In both cases multinuclear, mu-thiolato-bridged complexes, wherein the ligand coordinates with only three (NS2) of the four donor groups, had formed. The dinuclear complex 5 adopts a butterfly geometry and contains nickel(II) ions in a square-planar NS3 coordination environment. Cyclic voltammetry experiments indicate that the nickel centers in 5 are electron-rich but not overly sensitive toward oxidation. Complex 6 is tetranuclear and the four thiolato-bridged metal centers form a ring. It shows a distorted tetrahedral coordination geometry for the zinc(II) ions in an NS3 coordination sphere. In both complexes the hydroxyl functionalized ligand arm of the tripodal ligand remains uncoordinated.     

Spin crossover in di-, tri- and tetranuclear, mixed-ligand tris(pyrazolyl)methane iron(II) complexes

A series of polynuclear mixed-ligand tris(pyrazolyl)methane iron(II) complexes displaying high temperature spin crossover behaviour has been synthesised. These complexes are of the type [(Fe((3,5-Me(2)pz)(3)CH))(n)(μ-L)](BF(4))(2n), where μ-L is one of five bridging ligands X(CH(2)OCH(2)C(pz)(3))(n), (X = the central linking moiety, pz = pyrazolyl ring and n = 2 (ditopic), 3 (tritopic) or 4 (tetratopic)). Throughout the series the terminal tris(3,5-dimethylpyrazolyl)methane co-ligand (3,5-Me(2)pz)(3)CH and the BF(4)(-) counter anion were kept constant while variations in the central linking moiety have produced three dinuclear complexes and a trinuclear and tetranuclear complex, all isolated as solvates. The three dinuclear complexes are a 1,4-xylene-bridged complex 1·2DME, a 2,6-naphthalene-bridged complex 2·2.5MeCN.2DME and a 1,4-butene-bridged complex 3·2DME. The trinuclear complex 4·solvent (solvent undefined) has a 1,3,5-mesitylene core and the tetranuclear complex, 5·8MeCN.2(t)BuOMe, has a 1,2,4,5-tetramethylbenzene core (DME = dimethoxyethane, (t)BuOMe = tertiarybutyl-methylether). The trinuclear cluster has a "3-up" cup shape with the cups arranging themselves in pairs to form capsules that contain anion guests. All the solvated compounds have been structurally characterised and both the solvated and desolvated versions have had their magnetic and thermal properties thoroughly investigated by variable temperature magnetic susceptibility, differential scanning calorimetric and M?ssbauer spectral methods. They all display typical low spin iron(II) magnetic behaviour at room temperature and all undergo a spin state transition to high spin iron(II) above room temperature. In particular, complex 1·2DME shows an abrupt spin transition which shifts, upon desolvation, to a lower value of T(1/2) and in addition displays a small thermal hysteresis.     

High and low spin mononuclear and dinuclear iron(II) complexes of 4-amino and 4-pyrrolyl-3,5-di(2-pyridyl)-4H-1,2,4-triazoles

The first dinuclear iron(II) complexes of any 4-substituted 3,5-di(2-pyridyl)-4H-1,2,4-triazole ligands, [Fe(II)2(adpt)2(H2O)1.5(CH3CN)2.5](BF4)4 and [Fe(II)2(pldpt)2(H2O)2(CH3CN)2](BF4)4, are presented [where adpt is 4-amino-3,5-di(2-pyridyl)-4H-1,2,4-triazole and pldpt is 4-pyrrolyl-3,5-di(2-pyridyl)-4H-1,2,4-triazole]. Both dinuclear complexes feature doubly triazole bridged iron(II) centers that are found to be [high spin-high spin] at all temperatures, 4-300 K, and to exhibit weak antiferromagnetic coupling. In the analogous monometallic complexes, [Fe(II)(Rdpt)2(X)2](n+), the spin state of the iron(II) center was controlled by appropriate selection of the axial ligands X. Specifically, both of the chloride complexes, [Fe(II)(adpt)2(Cl)2] x 2 MeOH and [Fe(II)(pldpt)2(Cl)2] x 2 MeOH x H2O, were found to be high spin whereas the pyridine adduct [Fe(II)(adpt)2(py)2](BF4)2 was low spin. Attempts to prepare [Fe(II)(pldpt)2(py)2](BF4)2 and the dinuclear analogues [Fe(II)2(Rdpt)2(py)4](BF4)4 failed, illustrating the significant challenges faced in attempts to develop control over the nature of the product obtained from reactions of iron(II) and these bis-bidentate ligands.     

Synthetic and structural investigations of linear and macrocyclic nickel/iron/sulfur cluster complexes

Three series of new Ni/Fe/S cluster complexes have been prepared and structurally characterized. One series of such complexes includes the linear type of (diphosphine)Ni-bridged double-butterfly Fe/S complexes [(μ-RS)(μ-S═CS)Fe(2)(CO)(6)](2)[Ni(diphosphine)] (1-6; R = Et, t-Bu, n-Bu, Ph; diphosphine = dppv, dppe, dppb), which were prepared by reactions of monoanions [(μ-RS)(μ-CO)Fe(2)(CO)(6)](-) (generated in situ from Fe(3)(CO)(12), Et(3)N, and RSH) with excess CS(2), followed by treatment of the resulting monoanions [(μ-RS)(μ-S═CS)Fe(2)(CO)(6)](-)with (diphosphine)NiCl(2). The second series consists of the macrocyclic type of (diphosphine)Ni-bridged double-butterfly Fe/S complexes [μ-S(CH(2))(4)S-μ][(μ-S═CS)Fe(2)(CO)(6)](2)[Ni(diphosphine)] (7-9; diphosphine = dppv, dppe, dppb), which were produced by the reaction of dianion [{μ-S(CH(2))(4)S-μ}{(μ-CO)Fe(2)(CO)(6)}(2)](2-) (formed in situ from Fe(3)(CO)(12), Et(3)N, and dithiol HS(CH(2))(4)SH with excess CS(2), followed by treatment of the resulting dianion [{μ-S(CH(2))(4)S-μ}{(μ-S═CS)Fe(2)(CO)(6)}(2)](2-) with (diphosphine)NiCl(2). However, more interestingly, when dithiol HS(CH(2))(4)SH (used for the production of 7-9) was replaced by HS(CH(2))(3)SH (a dithiol with a shorter carbon chain), the sequential reactions afforded another type of macrocyclic Ni/Fe/S complex, namely, the (diphosphine)Ni-bridged quadruple-butterfly Fe/S complexes [{μ-S(CH(2))(3)S-μ}{(μ-S═CS)Fe(2)(CO)(6)}(2)](2)[Ni(diphosphine)](2) (10-12; diphosphine = dppv, dppe, dppb). While a possible pathway for the production of the two types of novel metallomacrocycles 7-12 is suggested, all of the new complexes 1-12 were characterized by elemental analysis and spectroscopy and some of them by X-ray crystallography.     

Using ligand bite angles to control the hydricity of palladium diphosphine complexes

A series of [Pd(diphosphine)(2)](BF(4))(2) and Pd(diphosphine)(2) complexes have been prepared for which the natural bite angle of the diphosphine ligand varies from 78 degrees to 111 degrees. Structural studies have been completed for 7 of the 10 new complexes described. These structural studies indicate that the dihedral angle between the two planes formed by the two phosphorus atoms of the diphosphine ligands and palladium increases by over 50 degrees as the natural bite angle increases for the [Pd(diphosphine)(2)](BF(4))(2) complexes. The dihedral angle for the Pd(diphosphine)(2) complexes varies less than 10 degrees for the same range of natural bite angles. Equilibrium reactions of the Pd(diphosphine)(2) complexes with protonated bases to form the corresponding [HPd(diphosphine)(2)](+) complexes were used to determine the pK(a) values of the corresponding hydrides. Cyclic voltammetry studies of the [Pd(diphosphine)(2)](BF(4))(2) complexes were used to determine the half-wave potentials of the Pd(II/I) and Pd(I/0) couples. Thermochemical cycles, half-wave potentials, and measured pK(a) values were used to determine both the homolytic ([HPd(diphosphine)(2)](+) --> [Pd(diphosphine)(2)](+) + H*) and the heterolytic ([HPd(diphosphine)(2)](+) --> [Pd(diphosphine)(2)](2+) + H(-)) bond-dissociation free energies, Delta G(H*)* and Delta G(H-)*, respectively. Linear free-energy relationships are observed between pK(a) and the Pd(I/0) couple and between Delta G(H-)* and the Pd(II/I) couple. The measured values for Delta G(H*)* were all 57 kcal/mol, whereas the values of Delta G(H-)* ranged from 43 kcal/mol for [HPd(depe)(2)](+) (where depe is bis(diethylphosphino)ethane) to 70 kcal/mol for [HPd(EtXantphos)(2)](+) (where EtXantphos is 9,9-dimethyl-4,5-bis(diethylphosphino)xanthene). It is estimated that the natural bite angle of the ligand contributes approximately 20 kcal/mol to the observed difference of 27 kcal/mol for Delta G(H-)*.     

One electron oxidation of chromium N,N-bis(diarylphosphino)amine and bis(diarylphosphino)methane complexes relevant to ethene trimerisation and tetramerisation

Complexes of the type [(diphosphine)Cr(CO)(4)] (diphosphine = Ph(2)PN(iPr)PPh(2), Ar(2)PN(Me)PAr(2) or Ar(2)PCH(2)PAr(2) (Ar = 2-C(6)H(4)(MeO)) have been synthesised. In the solid state, these complexes show tight phosphine bite angles in the range 67.82(4) degrees to 71.52(5) degrees and the nitrogen atom in N,N-bis(diarylphophino)amine ligands adopts an almost planar (sp(2)) geometry. All of the complexes are readily oxidised electrochemically or chemically to corresponding Cr(i) species. There is no evidence for coordination of the pendant ether group in derivatives with Ar = 2-MeO-C(6)H(4) in either Cr(0) or Cr(i) species. Treatment of the [(diphosphine)Cr(CO)(4)] complexes with [NO]BF(4) yields [(diphosphine)Cr(NO)(CO)(3)]BF(4). Removal of CO ligands to generate an oligomerisation-active species is not observed with amine oxides but triethyl aluminium is effective in this role, and active catalysts can be produced. The use of weakly coordinating anions seems crucial in achieving oligomerisation catalysis.     

Di- and tetra-nuclear copper(II), nickel(II), and cobalt(II) complexes of four bis-tetradentate triazole-based ligands: synthesis, structure, and magnetic properties

Four bis-tetradentate N(4)-substituted-3,5-{bis[bis-N-(2-pyridinemethyl)]aminomethyl}-4H-1,2,4-triazole ligands, L(Tz1)-L(Tz4), differing only in the triazole N(4) substituent R (where R is amino, pyrrolyl, phenyl, or 4-tertbutylphenyl, respectively) have been synthesized, characterized, and reacted with M(II)(BF(4))(2)·6H(2)O (M(II) = Cu, Ni or Co) and Co(SCN)(2). Experiments using all 16 possible combinations of metal salt and L(TzR) were carried out: 14 pure complexes were obtained, 11 of which are dinuclear, while the other three are tetranuclear. The dinuclear complexes include two copper(II) complexes, [Cu(II)(2)(L(Tz2))(H(2)O)(4)](BF(4))(4) (2), [Cu(II)(2)(L(Tz4))(BF(4))(2)](BF(4))(2) (4); two nickel(II) complexes, [Ni(II)(2)(L(Tz1))(H(2)O)(3)(CH(3)CN)](BF(4))(4)·0.5(CH(3)CN) (5) and [Ni(II)(2)(L(Tz4))(H(2)O)(4)](BF(4))(4)·H(2)O (8); and seven cobalt(II) complexes, [Co(II)(2)(L(Tz1))(μ-BF(4))](BF(4))(3)·H(2)O (9), [Co(II)(2)(L(Tz2))(μ-BF(4))](BF(4))(3)·2H(2)O (10), [Co(II)(2)(L(Tz3))(H(2)O)(2)](BF(4))(4) (11), [Co(II)(2)(L(Tz4))(μ-BF(4))](BF(4))(3)·3H(2)O (12), [Co(II)(2)(L(Tz1))(SCN)(4)]·3H(2)O (13), [Co(II)(2)(L(Tz2))(SCN)(4)]·2H(2)O (14), and [Co(II)(2)(L(Tz3))(SCN)(4)]·H(2)O (15). The tetranuclear complexes are [Cu(II)(4)(L(Tz1))(2)(H(2)O)(2)(BF(4))(2)](BF(4))(6) (1), [Cu(II)(4)(L(Tz3))(2)(H(2)O)(2)(μ-F)(2)](BF(4))(6)·0.5H(2)O (3), and [Ni(II)(4)(L(Tz3))(2)(H(2)O)(4)(μ-F(2))](BF(4))(6)·6.5H(2)O (7). Single crystal X-ray structure determinations revealed different solvent content from that found by microanalysis of the bulk sample after drying under a vacuum and confirmed that 5', 8', 9', 11', 12', and 15' are dinuclear while 1' and 7' are tetranuclear. As expected, magnetic measurements showed that weak antiferromagnetic intracomplex interactions are present in 1, 2, 4, 7, and 8, stabilizing a singlet spin ground state. All seven of the dinuclear cobalt(II) complexes, 9-15, have similar magnetic behavior and remain in the [HS-HS] state between 300 and 1.8 K.