Synthesis of [Ru(phen)(2)dppz](2+)-tethered oligo-DNA and studies on the metallointercalation mode into the DNA duplex

To explore the binding properties of [Ru(phen)(2)dppz](2+) complex (phen = 1,10-phenanthroline, dppz = dipyrido[3,2-a:2',3'-c]phenazine) in a sequence-specific manner in DNA duplex, it was tethered through the dppz ligand to a central position as well as both at the 3'- and 5'-ends of oligodeoxyribonucleotide (ODN). The middle [Ru(phen)(2)dppz](2+)-ODN tethered was resolved and isolated as four pure diastereomers, while the 3'- or 5'-[Ru(phen)(2)dppz](2+)-ODNs were inseparable on RP-HPLC. Thermal stability of the (Ru(2+)-ODN).DNA duplexes is found to increase considerably (DeltaT(m) = 12.8-23.4 degrees C), depending upon the site of the covalent attachment of the tethered [Ru(phen)(2)dppz](2+) complex, or the chirality of the [Ru(phen)(2)dppz](2+)-linker tethered at the middle of the ODN, compared to the unlabeled counterpart. Gross differences in CD between the [Ru(phen)(2)dppz](2+)-tethered and the native DNA duplexes showed that the global duplex conformation of the former has considerably altered from the B-type, but is still recognized by DNase I. The thermal melting studies, CD measurements, as well as DNase I digestion data, are interpreted as a result of intercalation of the dppz moiety, which is realized by threading of the Ru(phen)(2) complex part through the DNA duplex core. DNase I footprinting with four diastereomerically pure middle ([Ru(phen)(2)dppz](2+)-ODN).DNA duplexes furthermore showed that the tethered [Ru(phen)(2)dppz](2+)-linker chirality dictates the stereochemical accessibility of various phosphodiester moieties (around the intercalation site) toward the cleavage reaction by the enzyme. The diastereomerically pure ruthenium-modified duplexes, with the well-defined pi-stack, will be useful to explore stereochemistry-dependent energy- and electron-transfer chemistry to understand oxidative damage to the DNA double helix as well as the long-range energy- and electron-transfer processes with DNA as a reactant.     

Alternative heterocycles for DNA recognition: the benzimidazole/imidazole pair

Boc-protected benzimidazole-pyrrole, benzimidazole-imidazole, and benzimidazole-methoxypyrrole amino acids were synthesized and incorporated into DNA binding polyamides, comprised of N-methyl pyrrole and N-methyl imidazole amino acids, by means of solid-phase synthesis on an oxime resin. These hairpin polyamides were designed to determine the DNA recognition profile of a side-by-side benzimidazole/imidazole pair for the designated six base pair recognition sequence. Equilibrium association constants of the polyamide-DNA complexes were determined at two of the six base pair positions of the recognition sequence by quantitative DNase I footprinting titrations on DNA fragments each containing matched and single base pair mismatched binding sites. The results indicate that the benzimidazole-heterocycle building blocks can replace pyrrole-pyrrole, pyrrole-imidazole, and pyrrole-hydroxypyrrole constructs while retaining relative site specifities and subnanomolar match site affinities. The benzimidazole-containing hairpin polyamides represent a novel class of DNA binding ligands featuring tunable target recognition sequences combined with the favorable properties of the benzimidazole type DNA minor groove binders.     

Altered sequence specificity identified from a library of DNA-binding small molecules

BACKGROUND: The ability to target specific DNA sequences using small molecules has major implications for basic research and medicine. Previous studies revealed that a bis-intercalating molecule containing two 1,4,5,8-napthalenetetracarboxylic diimides separated by a lysine-tris-glycine linker binds to DNA cooperatively, in pairs, with a preference for G + C-rich sequences. Here we investigate the binding properties of a library of bis-intercalating molecules that have partially randomized peptide linkers. RESULTS: A library of bis-intercalating derivatives with varied peptide linkers was screened for sequence specificity using DNase I footprinting on a 231 base pair (bp) restriction fragment. The library mixtures produced footprints that were generally similar to the parent bis-intercalator, which bound within a 15 bp G + C-rich repeat above 125 nM. Nevertheless, subtle differences in cleavage enhancement bands followed by library deconvolution revealed a derivative with novel specificity. A lysine-tris-beta-alanine derivative was found to bind preferentially within a 19 bp palindrome, without substantial loss of affinity. CONCLUSIONS: Synthetically simple changes in the bis-intercalating compounds can produce derivatives with novel sequence specificity. The large size and symmetrical nature of the preferred binding sites suggest that cooperativity may be retained despite modified sequence specificity. Such findings, combined with structural data, could be used to develop versatile DNA ligands of modest molecular weight that target relatively long DNA sequences in a selective manner.     

Strong binding in the DNA minor groove by an aromatic diamidine with a shape that does not match the curvature of the groove

A combination of biophysical techniques has been used to characterize the interaction of an antitrypanosomal agent, CGP 40215A, with DNA. The results from a broad array of methods (DNase I footprinting, surface plasmon resonance, X-ray crystallography, and molecular dynamics) indicate that this compound binds to the minor groove of AT DNA sequences. Despite its unusual linear shape that is not complementary to that of the DNA groove, a high binding affinity was observed in comparison with other similar but more curved diamidine compounds. The amidine groups at both ends of the ligand and the -NH groups on the linker are involved in extensive and dynamic H-bonds to the DNA bases. Complementary and consistent results were obtained from both the X-ray and molecular dynamics studies; both of these methods reveal direct and water-mediated H-bonds between the ligand and the DNA.     

Quantitative microarray profiling of DNA-binding molecules

A high-throughput Cognate Site Identity (CSI) microarray platform interrogating all 524 800 10-base pair variable sites is correlated to quantitative DNase I footprinting data of DNA binding pyrrole-imidazole polyamides. An eight-ring hairpin polyamide programmed to target the 5 bp sequence 5'-TACGT-3' within the hypoxia response element (HRE) yielded a CSI microarray-derived sequence motif of 5'-WWACGT-3' (W = A,T). A linear beta-linked polyamide programmed to target a (GAA)3 repeat yielded a CSI microarray-derived sequence motif of 5'-AARAARWWG-3' (R = G,A). Quantitative DNase I footprinting of selected sequences from each microarray experiment enabled quantitative prediction of Ka values across the microarray intensity spectrum.     

Short lexitropsin that recognizes the DNA minor groove at 5'-ACTAGT-3': understanding the role of isopropyl-thiazole

Isopropyl-thiazole ((iPr)Th) represents a new addition to the building blocks of nucleic acid minor groove-binding molecules. The DNA decamer duplex d(CGACTAGTCG)(2) is bound by a short lexitropsin of sequence formyl-PyPy(iPr)Th-Dp (where Py represents N-methyl pyrrole, (iPr)Th represents thiazole with an isopropyl group attached, and Dp represents dimethylaminopropyl). NMR data indicate ligand binding in the minor groove of DNA to the sequence 5'-ACT(5)AG(7)T-3' at a 2:1 ratio of ligand to DNA duplex. Ligand binding, assisted by the enhanced hydrophobicity of the (iPr)Th group, occurs in a head-to-tail fashion, the formyl headgroups being located toward the 5'-ends of the DNA sequence. Sequence reading is augmented through hydrogen bond formation between the exocyclic amine protons of G(7) and the (iPr)Th nitrogen, which lies on the minor groove floor. The B(I)/B(II) DNA backbone equilibrium is altered at the T(5) 3'-phosphate position to accommodate a B(II) configuration. The ligands bind in a staggered mode with respect to one another creating a six base pair DNA reading frame. The introduction of a new DNA sequence-reading element into the recognition jigsaw, combined with an extended reading frame for a small lexitropsin with enhanced hydrophobicity, holds great promise in the development of new, potentially commercially viable drug lead candidates for gene targeting.     

Exploring ligand-DNA space using type IIS restriction enzymes

Investigating ligand-DNA interactions using type IIS restriction enzymes (IISRE) as footprinting reagents is reviewed and contemplated. Ligand binding at a IISRE's cleavage but not sequence recognition site protects DNA from strand scission. This spatial arrangement has been exploited in the development of qualitative (combinatorial) and quantitative ligand-DNA investigative methods collectively termed Type IIS Restriction Enzyme Footprinting (cIISREF and qIISREF respectively). In cIISREF, the consensus binding sequence of a ligand is sought by using a IISRE to segregate combinatorial library members that are bound by ligand from those that are not. A PCR is performed following the segregation step to enrich the library in ligand binding (i.e. uncut) sequences. It might be possible that diversities approaching 10(30) unique sequences could be simultaneously searched using this homogeneous and biologically relevant method. For qIISREF, a ligand-DNA equilibrium constant is measured by quantifying the amounts of target and control DNA IISRE cleavage products as a function of ligand concentration. The control sequence is engineered to not bind ligand. Along with illustrating these methods by reviewing published works, current concerns and future prospects for IISREF are discussed.     

Effects of DNA mismatches on binding affinity and kinetics of polymerase-DNA complexes as revealed by surface plasmon resonance biosensor

In this study, surface plasmon resonance (SPR) biosensor techniques were used to obtain quantitative information on the kinetics of the DNA and polymerase I (Klenow fragment) interaction. DNA duplexes containing different base compositions at the binding site were immobilized on the SPR sensor surface via biotin-streptavidin chemistry and the subsequent binding of the polymerase was measured in real time. Various kinetic models were tested and a translocation model was shown to provide the best fit for the binding and dissociation profiles. The results revealed that the enzyme binds to DNA at both the polymerase and the exonuclease domains with different association and dissociation rates as well as affinity constants, depending on the presence of mismatches near the primer 3'-end. Introduction of unpaired bases increases the DNA binding affinity towards the exonuclease domain and promotes the translocation of DNA from the polymerase site to the exonuclease site. The results also demonstrated that SPR biosensors may be used as a sensitive technique for studying molecular recognition events such as single-base discrimination involved in protein-DNA interaction.     

In silico footprinting of ligands binding to the minor groove of DNA

The sequence selectivity of small molecules binding to the minor groove of DNA can be predicted by "in silico footprinting". Any potential ligand can be docked in the minor groove and then moved along it using simple simulation techniques. By applying a simple scoring function to the trajectory after energy minimization, the preferred binding site can be identified. We show application to all known noncovalent binding modes, namely 1:1 ligand:DNA binding (including hairpin ligands) and 2:1 side-by-side binding, with various DNA base pair sequences and show excellent agreement with experimental results from X-ray crystallography, NMR, and gel-based footprinting.     

A microfluidic device that generates hydroxyl radicals to probe the solvent accessible surface of nucleic acids

We describe a microfluidic device containing a mineral matrix capable of rapidly generating hydroxyl radicals that enables high-resolution structural studies of nucleic acids. Hydroxyl radicals cleave the solvent accessible backbone of DNA and RNA; the cleavage products can be detected with as fine as single nucleotide resolution. Protection from hydroxyl radical cleavage (footprinting) can identify sites of protein binding or the presence of tertiary structure. Here we report preparation of micron sized particles of iron sulfide (pyrite) and fabrication of a microfluidic prototype that together generate enough hydroxyl radicals within 20 ms to cleave DNA sufficiently for a footprinting analysis to be conducted. This prototype enables the development of high-throughput and/or rapid reaction devices with which to probe nucleic acid folding dynamics and ligand binding.     

Nonradiochemical DNase I footprinting by capillary electrophoresis

A new application for DNase I footprinting using capillary electrophoresis (CE) has been developed in order to decrease analysis time and to eliminate the use of radiochemicals. An additional advantage of the new method over the traditional radioactive methods is that the DNA probe can be labeled on both ends with different fluorescein dyes. This provides an internal check of the identification of protein-binding sites on DNA, because the binding region can be observed from both DNA strands. The initial parameters for the CE method were developed using the Promega Core Footprinting Kit for analysis of AP-2 binding sites in the SV40 enhancer sequence. After optimization of the method, the protocol was found to be effective for footprint analysis of the immediate upstream region (bases -1 to -370) of the rat glutathione peroxidase (GPX) and it permitted identification of a previously unknown binding site in the upstream sequence of the GPX gene.     

Induction of a remarkable conformational change in a human telomeric sequence by the binding of naphthyridine dimer: inhibition of the elongation of a telomeric repeat by telomerase

The binding of a dimeric form of the 2-amino-1,8-naphthyridine derivative (naphthyridine dimer) to a human telomeric sequence, TTAGGG, was investigated by UV melting, CD spectra, and CSI-MS measurements. Both the 9-mer d(TTAGGGTTA) and the 15-mer d(TTAGGGTTAGGGTTA) showed apparent melting temperatures (T(m)) of 45.6 and 63.6 degrees C, respectively, in the presence of naphthyridine dimer (30 microM) in sodium cacodylate buffer (50 mM, pH 7.0) containing 100 mM NaCl. The CD spectra at 235 and 255 nm of the 9-mer increased in intensity accompanied with strong induced CDs at 285 and 340 nm upon complex formation with naphthyridine dimer. UV titration of the binding of naphthyridine dimer to the 9-mer at 320 nm showed a hypochromism of the spectra. A Scatchard plot of the data showed the presence of multiple binding sites with different association constants. Cold spray ionization mass spectrometry of the complex between naphthyridine dimer and the 9-mer clearly showed that one to three molecules of the ligand bound to the dimer duplex of the 9-mer. Telomeric repeat elongation assay showed that the binding of naphthyridine dimer to the telomeric sequence inhibits the elongation of the sequence by telomerase.     

Screening of threading bis-intercalators binding to duplex DNA by electrospray ionization tandem mass spectrometry

The DNA binding of novel threading bis-intercalators V1, trans-D1, and cis-C1, which contain two naphthalene diimide (NDI) intercalation units connected by a scaffold, was evaluated using electrospray ionization mass spectrometry (ESI-MS) and DNAse footprinting techniques. ESI-MS experiments confirmed that V1, the ligand containing the -Gly3-Lys- peptide scaffold, binds to a DNA duplex containing the 5'-GGTACC-3' specific binding site identified in previous NMR-based studies. The ligand formed complexes with a ligand/DNA binding stoichiometry of 1:1, even when there was excess ligand in solution. Trans-D1 and cis-C1 are new ligands containing a rigid spiro-tricyclic scaffold in the trans- and cis- orientations, respectively. Preliminary DNAse footprinting experiments identified possible specific binding sites of 5'-CAGTGA-5' for trans-D1 and 5'-GGTACC-3' for cis-C1. ESI-MS experiments revealed that both ligands bound to DNA duplexes containing the respective specific binding sequences, with cis-C1 exhibiting the most extensive binding based on a higher fraction of bound DNA value. Cis-C1 formed complexes with a dominant 1:1 binding stoichiometry, whereas trans-D1 was able to form 2:1 complexes at ligand/DNA molar ratios >or=1 which is suggestive of nonspecific binding. Collisional activated dissociation (CAD) experiments indicate that DNA complexes containing V1, trans-D1, and cis-C1 have a unique fragmentation pathway, which was also observed for complexes containing the commercially available bis-intercalator echinomycin, as a result of similar binding interactions, marked by intercalation in addition to hydrogen bonding by the scaffold with the DNA major or minor groove.     

Interaction of Cationic Manganese Porphyrins with DNA. A Binding Model

The DNA cleavage properties of two cationic manganese porphyrins possessing different peripheral substituents were compared. The identical nature of the strand scission patterns of the porphyrins on a 139 base pair restriction fragment of pBR-322 DNA, along with other evidence, suggests that the porphyrin is end-on bound via the minor groove in a melted or partially melted region of DNA. This unusual binding mode underscores the potential of outisde binding cationic metalloporphyrins as probes for low melting regions of DNA     

NMR structure of a cyclic polyamide-DNA complex

The solution structure of a cyclic polyamide ligand complexed to a DNA oligomer, derived from NMR restrained molecular mechanics, is presented. The polyamide, cyclo-gamma-ImPyPy-gamma-PyPyPy-, binds to target DNA with a nanomolar dissociation constant as characterized by quantitative footprinting previously reported. 2D (1)H NMR data were used to generate distance restraints defining the structure of this cyclic polyamide with the DNA duplex d(5'-GCCTGTTAGCG-3'):d(5'-CGCTAACAGGC-3'). Data interpretation used complete relaxation matrix analysis of the NOESY cross-peak intensities with the program MARDIGRAS. The NMR-based distance restraints (276 total) were applied in restrained molecular dynamics calculations using a solvent model, yielding structures with an rmsd for the ligand and binding site of approximately 1 A. The resulting structures indicate some distortion of the DNA in the binding site. The constraints from cyclization lead to altered stacking of the rings in the halves of the cyclic ligand relative to unlinked complexes. Despite this, the interactions with DNA are very similar to what has been found in unlinked complexes. Measurements of ligand amide and DNA imino proton exchange rates indicate very slow dissociation of the ligand and show that the DNA can undergo opening fluctuations while the ligand is bound although the presence of the ligand decreases their frequency relative to the free DNA.     

Photocleavage of lysozyme by cobalt(III) complexes

Photochemical reagents that cleave proteins at specific sites (photoproteases) are useful for studying protein structure and protein-ligand interactions. PolyammineCo(III) complexes are tested here as photochemical probes to cleave proteins. Irradiation of a mixture of lysozyme, a model protein, and polyammineCo(III) complexes resulted in the facile cleavage of the peptide backbone. Photocleavage yielded two fragments of molecular weights 10.6 and 3.7 kDa, and these masses sum to the molecular mass of lysozyme (14.3 kDa). No cleavage was detected in the absence of the metal complex, in the dark, or upon irradiation at wavelengths of >420 nm. The photocleavage yield increased with irradiation time and with the concentrations of the metal complex and the protein. N-terminal sequencing of the 10.6 kDa fragment indicated residues that are identical to the N-terminus of lysozyme, and sequencing of the 3.7 kDa fragment indicated Val-Ala-Trp-Arg, an internal sequence of lysozyme. From the known primary sequence of lysozyme and the sequencing data, the cleavage site was assigned to Trp108-Val109. Molecular modeling indicates that the observed cleavage site is within few angstroms from the proposed metal binding site at Glu35-Asp52. This is the first report of the successful photocleavage of proteins, with high selectivity, by transition metal complexes. This novel observation can facilitate the rational design of transition metal complexes for the photochemical footprinting of metal binding sites on proteins.     

Peptide bis-intercalator binds DNA via threading mode with sequence specific contacts in the major groove

BACKGROUND: We previously described a general class of DNA polyintercalators in which 1,4,5,8-naphthalenetetracarboxylic diimide (NDI) intercalating units are connected via peptide linkers, resulting in the first known tetrakis- and octakis-intercalators. We showed further that changes in the composition of the peptide tether result in novel DNA binding site specificities. We now examine in detail the DNA binding mode and sequence specific recognition of Compound 1, an NDI bis-intercalator containing the peptide linker gly-gly-gly-lys. RESULTS: 1H-NMR structural studies of Compound 1 bound to d(CGGTACCG)(2) confirmed a threading mode of intercalation, with four base pairs between the diimide units. The NMR data, combined with DNAse I footprinting of several analogs, suggest that specificity depends on a combination of steric and electrostatic contacts by the peptide linker in the floor of the major groove. CONCLUSIONS: In view of the modular nature and facile synthesis of our NDI-based polyintercalators, such structural knowledge can be used to improve or alter the specificity of the compounds and design longer polyintercalators that recognize correspondingly longer DNA sequences with alternating access to both DNA grooves.     

Sequence-specific trapping of topoisomerase I by DNA binding polyamide-camptothecin conjugates

Hairpin pyrrole-imidazole polyamides are synthetic ligands that bind in the minor groove of DNA with affinities and specificities comparable to those of DNA binding proteins. Three polyamide-camptothecin conjugates 1-3 with linkers varying in length between 7, 13, and 18 atoms were synthesized to trap the enzyme Topoisomerase I and induce cleavage at predetermined DNA sites. One of these, polyamide-camptothecin conjugate 3 at nanomolar concentration (50 nM) in the presence of Topo I (37 degrees C), induces DNA cleavage between three and four base pairs from the polyamide binding site in high yield (77%).     

Ru(bpy)2(L)]Cl2: luminescent metal complexes that bind DNA base mismatches

Here we report the synthesis of luminescent ruthenium complexes that bind DNA base pair mismatches. [Ru(bpy)2(tpqp)]Cl2 (tpqp = 7,8,13,14-tetrahydro-6-phenylquino[8,7-k][1,8]phenanthroline), [Ru(bpy)2(pqp)]Cl2 (pqp = 6-phenylquino[8,7-k][1,8]phenanthroline), and [Ru(bpy)2(tactp)]Cl2 [tactp = 4,5,9,18-tetraazachryseno[9,10-b]triphenylene] have been synthesized, and their spectroscopic properties in the absence and presence of DNA have been examined. While [Ru(bpy)2(pqp)]2+ shows no detectable luminescence, [Ru(bpy)2(tpqp)]2+ is luminescent in the absence and presence of DNA with an excited-state lifetime of 10 ns and a quantum yield of 0.002. Although no increase in emission intensity is associated with binding to mismatch-containing DNA, luminescence quenching experiments and measurements of steady-state fluorescence polarization provide evidence for preferential binding to oligonucleotides containing a CC mismatch. Furthermore, by marking the site of binding through singlet oxygen sensitized damage, the complex has been shown to target a CC mismatch site directly with a specific binding affinity, Kb = 4 x 10(6) M(-1). [Ru(bpy)2(tactp)]2+, an analogue of [Ru(bpy)2(dppz)]2+ containing a bulky intercalating ligand, is luminescent in aqueous solution at micromolar concentrations and exhibits a 12-fold enhancement in luminescence in the presence of DNA. The complex, however, tends to aggregate in aqueous solution; we find a dimerization constant of 9.8 x 10(5) M(-1). Again, by singlet oxygen sensitization it is apparent that [Ru(bpy)2(tactp)]2+ binds preferentially to a CC mismatch; using a DNase I footprinting assay, a binding constant to a CC mismatch of 8 x 10(5) M(-1) is found. Hence results with these novel luminescent complexes support the concept of using a structurally demanding ligand to obtain selectivity in targeting single base mismatches in DNA. The challenge is coupling the differential binding we can obtain to differential luminescence.     

杂交及切断过程的QCM实时检测研究(英文)

采用自组装技术,将 5′端标记有巯基的 20-merODN(oligo 1)以金 硫键形式牢固结合在 7. 995MHz的AT-切石英晶体的镀金表面,然后由石英晶体微天平实时检测了与碱基序列互补的 10 merODN (oligo 2)和 8 merODN(oligo 3)的杂交,同时还研究了稀土金属铈离子在温和条件下对DNA的水解切断作用.结果表明:应用QCM方法可能实时检测DNA的固定和杂交,Ce(IV)能随机切断单链DNA;但不能切断杂交形成的双链DNA,因此可利用杂交保护的方法对单链DNA实行定位切断.