偏斜光线抽运下的回音壁模式光纤激光辐射特性

研究了偏斜光线抽运下的回音壁模式光纤激光辐射特性.实验发现,在抽运光以偏斜光线方式沿光纤的近轴向抽运时,回音壁模式的光纤激光辐射中,既存在光电矢量和光纤径向垂直的横电波(TE),也存在光电矢量和光纤径向平行的横磁波(TM);随增益包层染料溶液折射率的增加,径向模式数和角模式数相同的TE波和TM波之间的波长差单调减小,回音壁模式激光辐射的中心波长向短波方向移动,辐射的波长范围变窄.用回音壁模式激光的辐射理论结合激光染料的四能级模型,满意地解释了实验结果.     

Design and fabrication of triangular inner cladding double-clad ytterbium doped fibre for high power lasers

To improve the performance of double clad high power fibre lasers, inner cladding design plays a significant role. A triangular inner cladding and silica structure second cladding with large air holes go acquire high inner cladding numerical aperture are designed. Single mode and high power output of the fibre lasers need the double clad Yb doped fibre with large core. A fibre with annular refractive index distribution core and low numerical aperture to acquire a large mode area fibre core is designed and fabricated. Furthermore co-doping with aluminium （A1） has been used to improve the solubility of ytterbium （Yb） into silicate network, and the core absorption coefficients of two Yb doped fibres are compared with different A1 concentration experimentally.     

Use of polyethylene glycol coatings for optical fibre humidity sensing

Humidity induced change in the refractive index and thickness of the polyethylene glycol (PEG) coatings are in situ investigated for a range from 10 to 95%, using an optical waveguide spectroscopic technique. It is experimentally demonstrated that, upon humidity change, the optical and swelling characteristics of the PEG coatings can be employed to build a plastic fibre optic humidity sensor. The sensing mechanism is based on the humidity induced change in the refractive index of the PEG film, which is directly coated onto a polished segment of a plastic optical fibre with dip-coating method. It is observed that PEG, which is a highly hydrophilic material, shows no monotonic linear response to humidity but gives different characteristics for various ranges of humidity levels both in index of refraction and in thickness. It undergoes a physical phase change from a semi-crystalline structure to a gel one at around 80% relative humidity. At this phase change point, a drastic decrease occurs in the index of refraction as well as a drastic increase in the swelling of the PEG film. In addition, PEG coatings are hydrogenated in a vacuum chamber. It is observed that the hydrogen has a preventing effect on the humidity induced phase change in PEG coatings. Finally, the possibility of using PEG coatings in construction of a real plastic fibre optic humidity sensor is discussed.     

Automatic fringe analysis of the induced anisotropy of bent optical fibres

A new theoretical model considering the refraction of the incident light beam by the fibre is suggested to determine the refractive index profile of bent optical fibres. This new model (slabs model) considering the cross section of the bent optical fibre consists of large number of slabs. The slabs model bases on the refraction of the incident beam by the fibre. The refractive index profile of the optical fibre cladding before bending obtained using the automated Fizeau interferometer with the aid of suggested model is compared with other models such as, the homogenous model and the multilayer model to verify the ability of this slab model. The refractive index profile of the bent optical fibre cladding is investigated using this suggested model. In addition, the new model is used to obtain the induced birefringence and the guiding parameters. The bending radius is recommended to be greater than 7.1 mm for the used optical fibre. The consideration of the refraction increases the accuracy of the results.     

单长周期光栅迈克耳孙干涉仪特性研究

单长周期光栅迈克耳孙（Michelson）干涉仪是由尾纤端面蒸镀高反膜的单根长周期光纤光栅构成。入射光经长周期光栅后,部分被耦合到包层中传输。经过包层和纤芯传输的光信号经尾纤端面反射后,重新耦合回到长周期光栅中,在光栅区域形成干涉。通过理论计算分析了各种因素对其光谱响应的影响。从实验上得到了干涉光谱的谐振峰波长位移与光纤段温度变化成良好的线性关系,测得其温度系数为31．3pm／℃。表明这种结构可用于高温传感或作为波分复用滤波器。     

Determination of GR-IN optical fibre parameters from transverse interferograms considering the refraction of the incident ray by the fibre

The core–cladding refractive index difference Δn and the index gradient profile parameter of the graded index (GR-IN) optical fibre has been determined. The curve representing the real path, in the core region, due to refraction of the beam and the change in the exit wavefront are considered. Multiple-beam Fizeau fringes and two-beam interference Pluta polarizing microscope, are used for this investigation. A new method, based on a derived mathematical expression, is used with a prepared computer program to estimate the fringe shift inside GR-IN of the fibre core. The estimated and experimental values of the fringe shift, along the core radius, are used to obtain the refractive index profile of the optical fibre. A comparison between the new method and a previous model considering the refraction has been shown. Microinterferograms are given for illustrations.     

Fibre optic target reflectivity sensor

This paper reports the principle of operation, the design aspects, experimentation and performance of a fibre optic target reflectivity sensor to examine the correlation between the detector output, variation in material type and the reflectivity properties of the materials tested. The device consists of a fibre optic transmitter, a fibre optic probe, target and a photodiode detector. The fibre optic probe consists of two well-polished PMMA (polymethyl methacrylate) fibres cemented together along some distance over the length. The principle of fibre optic lever displacement sensors is applied. Material effects are examined by preparing a variety of samples namely gold coated mirror, copper, brass, aluminium, steel and galvanized iron using the same polishing techniques. It is found that the response of the sensor changes with change of target surface. The results show that the fibre optic probe is capable of discriminating between materials. With the use of commercially available fibre, source and detector, the set-up proves to be simple, highly sensitive, low cost and versatile one, which can be adopted for on-line measurement or inspection of test components.     

The system of L-band 2×10 Gb/s WDM transmission over conventional single mode fibre with 600 km by chirped fibre Bragg gratings dispersion compensation

A chirped fibre Bragg grating according to ITU-T suggested L-band (2nd channel $\lambda _{1}=1570.83$~nm; 80th channel $\lambda _{2}=1603.57$ nm) with more than 1800 ps/nm single channel dispersion compensation is presented in this paper, of which the cladding mode loss, the delay curve ripple and the power fluctuation of the reflected spectrum are less than 0.5 dB, 50 ps and 0.25 dB, respectively. With this new FBG as dispersion compensation device, a $2\times 10$ Gb/s wavelength division multiplexing (WDM) L-band transmission of 600 km based on conventional single mode fibre (G.652 fibre) is performed without forward error correction. The bit error rate (BER) is less than 10$^{ - 12}$ and the power penalties of the 2{nd} and 80{th} channel of L-band are 1.8~dB and 2.0~dB, respectively.     

基于量子尺寸效应的纳米内包层光纤放大性研究

本文利用改进的化学汽相沉积法制作出纳米级InP薄膜内包层光纤;根据氢原子本征能量模型计算了InP微粒产生量子尺寸效应的相对粒径aB=8.313nm,且由量子尺寸效应计算了不同尺寸粒子的带隙能量以及相对应的光吸收波长;结果表明：当内包层薄膜材料厚度达5－50nm量级时,其能级将发生红移,产生放大性能.     

An optical fibre pH sensor based on dye doped mesostructured silica

This paper describes the synthesis and optical pH sensing properties of a pH indicator dye activated mesostructured silica coated optical fibre. The pH-sensitive dye bromothymol blue was incorporated into the mesostructure sol precursor and thin films/coatings were used for pH-sensing applications without prior removal of the surfactant. The pH sensitivity range and operating wavelength were analysed by absorption measurements on layer dip-coated on glass slides. The pH sensing properties of coated optical fibre were tested by evanescent wave method. Experiments were carried out by using a series of solutions of known pH. No leaching was observed (except at very high pH) and an excellent reversibility was obtained between pH=2 and 5.     

Modelling of attenuation properties of PCS fibres and its application to the backscattering measurement

The time-independent diffusion equation that describes an optical power flow in an axially perturbed multimode fibre with a lossy cladding is solved. On this basis the attenuation of plastic-clad silica (PCS) fibres depending on cladding loss, mode coupling due to fibre perturbation, launching conditions and fibre length is investigated by means of computer modelling. This involves not only attenuation properties of PCS fibres by themselves, but also how they are seen by the backscattering measurement technique.     

Cladding mode reorganization in high-refractive-index-coated long-period gratings: effects on the refractive-index sensitivity

We theoretically and experimentally investigated the reorganization of cladding modes in high-refractive-index- (HRI-) coated long-period gratings (LPGs), focusing on the influence of refractive-index sensitivity. When azimuthally symmetric nanoscale HRI coatings are deposited along LPG devices, a significant modification of the distribution of cladding modes occurs, depending on the layers' features (refractive index and thickness) and on the external refractive index. In particular, if these parameters are properly chosen, a transition between cladding modes and overlay modes occurs. Numerical and experimental effects of the mode transition on the sensitivity of the surrounding refractive index are described.     

A dark hollow beam from a selectively liquid-filled photonic crystal fibre

This paper reports that, based on the electromagnetic scattering theory of the multipole method, a high-quality hollow beam is produced through a selectively liquid-filled photonic crystal fibre. Instead of a doughnut shape, a typical hollow beam is produced by other methods; the mode-field images of the hollow-beam photonic crystal fibre satisfy sixth-order rotation symmetry, according to the symmetry of the photonic crystal fibre (PCF) structure. A dark spot size of the liquid-filled photonic crystal fibre-generated hollow beam can be tuned by inserting liquid into the cladding region and varying the photonic crystal fibre structure parameters. The liquid-filled PCF makes a convenient and flexible tool for the guiding and trapping of atoms and the creation of all-fibre optical tweezers.     

利用非均匀镀铜技术实现光纤光栅的色散可调

提出了一种利用非均匀镀铜技术在光纤光栅的外包层镀上径向均匀轴向厚度渐变的铜膜,通过温度控制来调节光纤光栅的啁啾量,从而实现光纤光栅的色散可调,用于动态的色散补偿。在理论方面,建立了完整的热平衡方程,对轴向厚度渐变镀铜膜光纤光栅在温度控制下的受力情况进行分析;分析了光纤光栅在同时受到温度变化和非均匀应力时的反射、时延、色散等特性,并进行了数值仿真。在实验方面,在自制的均匀光纤光栅上利用先真空镀后电镀的方法镀上了轴向厚度渐变的铜膜,并对镀膜后的光纤光栅利用温度调节装置进行测试,不同温度变化下光纤光栅的特性和理论仿真结果基本一致,从而验证了理论分析的正确性。     

基于模式转换及双峰谐振效应的薄包层镀膜长周期光纤光栅特性研究

基于耦合模理论,首先研究了镀膜长周期光纤光栅(LPFG)高阶包层模的模式转换,划分了高阶包层模的非模式转换区及模式转换区。分析了高阶包层模有效折射率随薄膜厚度增加的响应特性,包层模谐振波长在模式转换区的偏移量要大于非模式转换区。在此基础上,研究了不同包层半径下高阶包层模谐振波长随光栅周期的变化情况,结果表明,相同包层半径下模式转换区内双峰间距的偏移量大于非模式转换区;无论在模式转换区还是非模式转换区,包层半径的减小将增加双峰间距的偏移量。最后分析了不同包层半径下的高阶包层模双峰透射谱在模式转换区及非模式转换区内的折射率响应,进而提出了薄包层镀膜LPFG的优化设计方案,当选定敏感膜层厚度及折射率处于镀膜LPFG的模式转换区内,光栅周期靠近相位匹配转折点时,将得到灵敏度高于传统LPFG双峰传感器的镀膜LPFG折射率型双峰传感器;而减小包层半径,将进一步提高传感器的分辨本领。     

Calculation of propagating modes in a graded-index optical fibre

The characteristics of propagating modes of an optical fibre consisting of a cylindrical core whose refractive index varies arbitrarily with radius, embedded in a homogeneous cladding of infinite outer radius, are studied numerically. It is shown that, to avoid strongly accumulating errors, the numerical solution of the field equations in the core region must be performed by a combination of solution techniques, namely, by step-by-step integration in cylindrical shells where the solution is of oscillatory type, and by a two-point boundary-value technique in shells where the solution is of exponential type. When the core solution is matched at the core boundary to the cladding solution, there results a characteristic equation whose roots specify the effective refractive indices of the propagating modes. A complete theoretical discussion is presented for modes with, as well as without, axial symmetry. However, numerical results are reported here only for axially symmetric modes. Mode-to-mode dispersion in SELFOC-type fibres is calculated in the wavelength region near 0.85 μm for several configurations having either parabolic-type or hypersecant-type index profiles.     

Refractive index measurement with long-period gratings arc-induced in pure-silica-core fibres

We have investigated the sensitivity of arc-induced long-period gratings to changes of ambient refractive index. Two pure-silica-core fibres with different cladding diameters and a standard fibre were used in this study. For a 6 × 10⁻³ change of the refractive index, a 240 pm shift of the resonant wavelength was achieved with long-period gratings written in the 125 μm cladding diameter pure-silica-core fibre.     

Laser self-mixing interference fibre sensor

Fibre sensors exhibit a number of advantages over other sensors such as high sensitivity, electric insulation, corrosion resistance, interference rejection and so on. And laser self-mixing interference can accurately detect the phase difference of feedback light. In this paper, a novel laser self-mixing interference fibre sensor that combines the advantages of fibre sensors with those of laser self-mixing interference is presented. Experimental configurations are set up to study the relationship between laser power output and phase of laser feedback light when the fibre trembles or when the fibre is stretched or pressed. The theoretical analysis of pressure sensors based on laser self-mixing interference is indicated to accord with the experimental results.     

A simple model for approximate bandgap structure calculation of all-solid photonic bandgap fibre based on an array of rings

A simple model for approximate bandgap structure calculation of all-solid photonic bandgap fibre based on an array of rings is proposed. In this model calculated are only the potential modes of a unit cell, which is a high-index ring in the low-index background for this fibre, rather than the whole cladding periodic structure based on Bloch＇s theorem to find the bandgap. Its accuracy is proved by comparing its results with the results obtained by using the accurate full-vector plane-wave method. High speed in computation is its great advantage over the other exact methods, because it only needs to find the roots of one-dimensional analytical expressions. And the results of this model, mode plots, offer an ideal environment to explore the basic properties of photonie bandgap clearly.