聚(ε-己内酯)/苯乙烯-丙烯腈共聚物共混物相容性的研究

本文采用DSC、IR方法研究了聚ε-己内酯PCL苯乙烯-丙烯腈共聚物SAN共混物的相容性。观察到共混物只表现出单一的玻璃化转变温度。而且随着含量的增加,半结晶高聚物的熔点下降,利用Flory-Huggins方程计算出共混体系的相互作用参数x_(23)计算结果表明该体系是热力学相容的。红外光谱的研究表明两种高聚物的这种相容性,是由于PCL中的羰基和SAN中的α-氢的氢键相互作用引起的。     

聚(ε-己内酯)/苯乙烯-丙烯腈共聚物共混物的形态研究

本文研究了聚(ε-己内酯)(PCI/苯乙烯-丙烯腈共聚物(SAN)共混物的形态。采用差示扫描量热计(DSC)测量了PCL/SAN共混物中的PCL结晶度随着SAN含量的增加而下降;当SAN浓度达到60wt％。以上时,PCI的结晶度趋于零。通过偏光显微镜可以观察到在含高浓度PCI的共混物中,PCL是以球晶形式存在的。样品是由PCL球晶充满的,但是随着SAN含量的增加,PCL球晶半径减小,球晶结构逐渐变得不规整,而X-射线衍射测试了不同组成的PCL/SAN共混物中PCL的晶胞参数没有改变,说明SAN没有进入到PCL的晶胞内。以小角X-射线散射结果发现PCI片晶之间的距离随着SAN含量的增加而增大。以上说明SAN分子与没有结晶的PCL形成无定形相夹在PCL的片晶之间。     

SAN共聚物组成对PVC/ABS共混物相容性的影响

采用乳液聚合技术通过改变共聚单体的投料比(St/AN)合成了一系列不同AN结合量的ABS接枝共聚物粉料和SAN共聚物.将其与聚氯乙烯(PVC)和邻苯二甲酸二辛酯(DOP)熔融共混分别制得了PVC/ABS、PVC/SAN、PVC/ABS/DOP和PVC/SAN/DOP共混物,利用SEM、TEM和动态力学粘弹谱仪(DMA)对共混物的相容性和相结构进行了表征.结果发现,在PVC/ABS共混体系中,尽管改变接枝SAN共聚物的AN结合量,PVC和SAN共聚物均为不相容体系;在该共混物中引入增塑剂DOP后,虽然当SAN共聚物AN结合量小于23.4 wt%时,共混物在室温以上只存在一个tanδ峰,但形态结构研究结果表明共混物仍为不相容体系,共混物的相区尺寸明显地依赖于SAN共聚物中的AN结合量,当AN结合量为23.4 wt%时相区尺寸最小.     

SiO2粒子对PMMA/SAN共混体系相分离行为的影响

采用小角激光光散射(SALLS)并结合动态流变学方法,考察了气相法二氧化硅(SiO2)粒子的加入对聚甲基丙烯酸甲酯/苯乙烯-丙烯腈无规共聚物(PMMA/SAN)共混体系相行为的影响,得到了添加SiO2粒子前后的相图,发现SiO2粒子对基体相行为的影响与基体的组成有关.对PMMA/SAN(60/40)体系,加入SiO2粒子后相分离温度上升,但并未改变相分离机理,仍为亚稳单相分解过程(spinodal decomposition,SD);而对于PMMA/SAN(30/70)体系,加入SiO2粒子后却降低了体系的相分离温度.该现象可能是SiO2粒子和基体组分界面间组成与PMMA/SAN共混物基体组成的差异造成的.     

水辅助注塑PP/SAN共混物制品中横晶形成机理的研究

采用水辅助注塑(WAIM)设备,在不同的注水压力和熔体温度下制备了4种质量比(98/2,96/4,94/6和92/8)的聚丙烯/丙烯腈-苯乙烯共聚物(PP/SAN)共混物制品.采用偏光显微镜(POM)和扫描电子显微镜(SEM),研究了WAIM PP/SAN共混物制品的结晶形态和相形态.研究发现,高压水的穿透作用所引起的强剪切和快速冷却可诱导SAN在PP基体中原位成纤,并诱导PP在SAN纤维表面形成大量的晶核而最终形成横晶.SAN含量为4 wt%时,所形成横晶的含量随水压的提高而增加,随温度的降低而大幅增加.当SAN含量较低(2 wt%)时,制品中没有横晶形成.     

PMMA/SAN共混体系相分离的固体NMR研究

本文用~1H谱宽线固体NMR技术研究了聚甲基丙烯酸甲酯(PMMA)和苯乙烯—丙烯腈共聚物(SAN)共混体系不稳相分离初期过程,得到了在相分离过程中弛豫谱的变化规律,测定了相分离增长速率。结果表明,随着淬火时间的增加,两相体系形成,大分子扩散方式是由浓度低的区域向浓度高的区域扩散,扩散系数为负值;相分离增长速率的数量级与用光散射研究的结果相同;分子相互作用的相关距离为46.5nm。     

具有高散射能力的聚碳酸酯复合材料的制备与性能研究

以双酚A型聚碳酸酯(PC)为基体、苯乙烯-丙烯腈共聚物(SAN)为散射体,通过熔融共混方法制备了同时具备高透光率和高雾度的高散射聚碳酸酯光散射片,研究了SAN含量对光散射片微观结构和光散射性能的影响,发现透光率和雾度同时随着散射体含量增加而提高的现象.研究结果表明,当SAN含量低于30%时,分散相为球形颗粒,颗粒的平均粒径随着SAN含量的增加而增加,而颗粒的数量浓度则随之减小,这使得其透光率和雾度均随着SAN含量的增加而增加,当SAN含量为30%时,透光率和雾度达到最大值,分别为89.1%和91.7%.并结合Mie散射理论解释说明了透光率和雾度同时随着散射体含量的增加而提高的现象.但当SAN含量的进一步增加,分散相颗粒尺寸已远大于光波的波长,不再适用于Mie散射理论,且部分不再呈球形颗粒,使得PC片的透光率和雾度略有降低.     

An experimental study on saturation swelling of styrene–acryronitrile copolymer particles with styrene and acrylonitrile monomers

The saturation swelling behavior of styrene and acrylonitrile (SAN) copolymer particles with a styrene (St) and acrylonitrile (AN) comonomer mixture was investigated experimentally. The effects of the copolymer composition and the compositional inhomogeneity in SAN Copolymer particles on their swelling behavior were examined. The experimental results show that both the copolymer composition and the compositional inhomogeneity in SAN copolymer particles have little or no influence on the swellability of SAN copolymer particles with a St and AN comonomer mixture, as long as the weight fraction of AN monomer units in SAN copolymer particles is less than a certain value between 0.6 and 0.8. With increasing AN content in the copolymer particles beyond this value, however, the swellability of SAN copolymer particles gradually decreases. Semiempirical equations are proposed, which correlate the saturation concentration of each monomer in SAN copolymer particles as a function of the comonomer composition in the monomer droplets and the overall copolymer composition in SAN copolymer particles. © 1994 John Wiley & Sons, Inc.     

Synergistic effect of polyfunctional silane coupling agent and styrene acrylonitrile copolymer on the water‐resistant and mechanical performances of glass fiber–reinforced polyamide 6

Adverse effects of a high‐water absorption rate on properties of a glass fiber–reinforced polyamide 6 (GF‐PA6) composite significantly reduce performance and limit application in humid environments. In this paper, a polyfunctional silane (PFS) coupling agent with amino (–NH₂) and imino (–NH) groups and styrene acrylonitrile copolymer (SAN) were added to a composite, GF‐PA6, to prepare GF‐PA6/SAN/PFS composites via melt blending in a twin‐screw extruder. The effects of SAN and PFS content on the static and dynamic mechanical properties of the composites before and after water absorption were investigated in detail. The microstructure of the fracture surface was analyzed by a scanning electron microscope (SEM). The results show that the addition of SAN and PFS could effectively inhibit water absorption of the GF‐PA6 composites. The alkoxyl groups on PFS reacted chemically with the nitrile groups of SAN, which enriched SAN on the interface between the fiber and matrix during the extrusion and mixing process to improve the effect of water prevention. Therefore, the mechanical properties of the wet state were notably improved while preventing water from permeating the interface by only the addition of a small amount of SAN and PFS. Dynamic mechanical analysis (DMA) results showed that the addition of PFS improved the compatibility of PA6 with SAN and enhanced the interface adhesion between fiber and PA6. In terms of test result of the comprehensive performance, 10 phr SAN with 0.6 phr PFS was the best dosage.     

Brittle-Ductile Transition in Reactive PBT/SAN Blends

Toughening of reactive poly(butylene terephthalate) (PBT)/styrene-acrylonitrile copolymer (SAN) blends was studied. PBT/SAN with glycidyl methacrylate (SAN-GMA) (70/30) behaved in ductile manner on tensile test, while PBT/SAN (70/30) blend failed in brittle manner. Additionally, poly[methylene (phenylene isocyanate)] (PMPI) was added to the PBT/SAN-GMA blend, where it was expected that PMPI would assist the reaction between PBT and SAN-GMA, and then the strain at break was improved. PBT/SAN/PMPI (70/30/4) also behaved in ductile manner, although the interfacial adhesion strength between matrix and dispersed phase was extremely weaker than that in PBT/SAN-GMA blend. From the results, it was found that PMPI acted as a compatibilizer without copolymer formation at the interface and then PBT/SAN behaved in ductile manner in higher SAN content by PMPI effect.     

聚己内酯在聚己内酯/苯乙烯丙烯腈共聚物共混体系中的受限结晶

通过示差扫描量热 (DSC)、广角X 射线衍射 (WAXD)和小角X 射线散射 (SAXS)在不同尺度范围研究了聚己内酯 (PCL) 苯乙烯 丙烯腈共聚物 (SAN)共混体系中PCL的结晶行为 .由于该体系中SAN的玻璃化温度高于PCL的熔点 ,从而导致了PCL的结晶行为是一种受限结晶 .研究结果表明PCL的结晶行为从宏观 (DSC结果 )、介观 (SAXS结果 )到微观 (WAXD结果 )都受到了高玻璃化温度SAN的限制 .     

Binding of nucleosides with the cytotoxic plant alkaloid sanguinarine: Spectroscopic and thermodynamic studies

In spite of a large number of studies of the interaction of the cytotoxic plant alkaloid sanguinarine(SAN) with nucleic acids,the anticancer mechanism of SAN is still not clear.In contrast to the large number of studies of the interaction mechanism of SAN with DNA,there have been relatively few studies of the interaction of SAN with nucleosides.In this work,the interaction of SAN with three nucleosides-thymidine(T),uridine(U),and adenosine(A)-was investigated using a combination of conventional fluorescence and UV-vis spectroscopic techniques;thermodynamic calculations were also carried out at physiological pH 7.2.The binding processes of SAN with the different nucleosides were characterized by hypochromic and bathochromic effects in the absorption spectra of SAN and by the quenching of the fluorescence intensity of SAN.The measurements of fluorescence lifetime,the variations of the absorption spectra of the fluorophore,and the dependence of the quenching on the temperature indicated that the fluorescence quenching is static.The Stern-Volmer plot is nonlinear and approximately quadratic showing that,in this process,one SAN molecule can bind with two nucleoside molecules.These studies,together with our earlier studies of the binding of SAN with cytidine(C) and guanosine(G),showed that the binding constants of SAN with the five nucleosides at T = 308.15,318.15,and 328.15 K decreased in the order C > G > T > U > A and at T = 298.15 K decreased in the order G > C > T > U > A,and that the binding of SAN with the various nucleosides is not only slightly exothermic but also entropy-driven.All these results together with fluorescence quenching experiments advance good evidence concerning the interaction of SAN with various nucleosides.Such studies of the interaction mechanism of alkaloids with DNA may promote the development of new drugs.     

Synthesis, crystal structure and reactivity of uranium(IV) complexes with p-tert-butylcalix[4]arene ligands

Reactions of UCl4 with 25,27-dimethoxy-5,11,17,23-tetra-tert-butylcalix[4]arene (H2Me2calix) in THF or pyridine at 80 degrees C gave [UCl2(Me2calix)L2] [L = THF (1) or pyridine (2)]. Similar treatment of U(acac)(4) (acac = MeCOCHCOMe) with H2Me2calix in THF or pyridine afforded [U(acac)2(Me2calix)] (3). The bis-calixarene compound [U(Me2calix)(H2calix)] (4) was obtained by reaction of U(OTf)4 or U(OTf)3 with H2Me2calix in pyridine at 110 degrees C. Treatment of UCl4 with H2Me2calix in pyridine at 110 degrees C gave [Mepy][UCl2(Hcalix)(py)2] (5) resulting from demethylation and acid cleavage of the methoxy groups of the calixarene ligand of 2. Adventitious traces of air were responsible for the formation of [Hpy][Mepy]4[{UCl(calix)}3(mu3-O)][UCl6] (6) during the reaction of UCl4 and H2Me2calix, and of [{U(Me2calix)(mu3-O)LiCl(THF)}2] (7) during the reaction of 2 with tBuLi. The X-ray crystal structures of 1.2THF, 2.2py, 3.0.25L (L = THF and py), 4.2py, 5, 6.3py and 7.THF have been determined.     

聚氨酯硬段模型聚合物和SAN的特殊相互作用研究

运用ＤＳＣ物理老化和ＦＴＩＲ谱带分离及拟合技术，对聚氨酯（ＴＰＵ）硬段模型聚合物（ＨＭ）和苯乙烯－丙烯腈共聚物（ＳＡＮ）的共混体系进行了研究。实验结果表明，ＨＭ／ＳＡＮ是一个相容体系，体系的相容性来源于两组分聚合物之间的特殊相互作用。ＳＡＮ的加入消弱了ＨＭ中羰基和氨基间的氢键相互作用，这一结果对阐明ＴＰＵ／ＳＡＮ共混体系相容性本质提供了重要的依据。     

Self-assembly of a diblock copolymer with pendant disulfide bonds and chromophore groups: a new platform for fast release

An amphiphilic block copolymer comprising poly(ethylene glycol) (PEG) and poly(2-(methacryloyl)oxyethyl-2'-hydroxyethyl disulfide) (PMAOHD) blocks was synthesized by atom transfer radical polymerization (ATRP). Pyrenebutyric acid was conjugated to the block copolymer by esterification, and a block copolymer with pendant disulfide bonds and pyrenyl groups (PEG-b-P(MAOHD-g-Py)) was obtained. (1)H NMR and gel permeation chromatography (GPC) results demonstrated the successful synthesis of the block copolymer. The cleavage of the disulfide bonds and the degrafting of the pyrenyl groups were investigated in THF and a THF/methanol mixture. Fluorescence spectroscopy, GPC, and (1)H NMR results demonstrated fast cleavage of the disulfide bonds by Bu(3)P in THF. Fluorescence results showed the ratio of the intensity of the excimer peak to the monomer peak decreased rapidly within 20 min. GPC traces of the block copolymer moved to a long retention time region after addition of Bu(3)P, indicating the cleavage of the disulfide bonds and the degrafting of the pyrenyl groups. PEG-b-P(MAOHD-g-Py) can self-assemble into micelles with poly(MAOHD-g-Py) cores and PEG coronae in a mixture of methanol and THF (9:1 by volume). The dissociation of the micelles in the presence of Bu(3)P was investigated. After cleavage of the disulfide bonds in the micellar cores, a pyrene-containing small molecular compound and a block copolymer with pendant thiol groups were produced. Transmission electron microscopy (TEM), dynamic light scattering (DLS), and (1)H NMR were employed to track the dissociation of the polymeric micelles. All the techniques demonstrated the dissociation of the micelles and the fast release of pyrenyl groups from the micelles.     

硅氮负离子引发六甲基环三硅氧烷开环聚合的动力学研究

以二甲基亚砜(DMSO)或四氢呋喃(THF)作为促进剂,六苯基环三硅氮烷三锂盐(P3NLi)可以引发六甲基环三硅氧烷(D3)进行开环聚合,通过29Si-NMR谱的硅峰面积比例确定了不同反应时间D3的转化率,经过计算得到聚合反应对THF、DMSO、D3、P3NLi的反应级数,并给出了对应的动力学方程.     

二环戊二烯基氯化钕的合成

用NdCl₃·2 THF和环戊二烯的(摩尔比)比为1:1.8在四氢呋喃(THF)溶液中室温反应得到二环戊烯基氯化钕四氢呋喃络化物(C₅H₅)₂NdCl·THF。元素分析,红外光谱和X光电子能谱的数据证实了这一化合物的存在。在抽空加热下脱去THF得到组成符合(C₅H₅)₂NdCl的淡紫色的残余物。     

通过在线~7Li-NMR谱对负离子聚合见解的进一步验证

通过对正丁基锂(n-BuLi)/四氢呋喃(THF)引发α-甲基苯乙烯(mSt)负离子本体聚合,验证了n-BuLi缔合体可以引发聚合,形成超分子团聚体,然后在进一步聚合过程中超分子解离.证实了先前提出的负离子聚合的引发机理.通过7Li-NMR对聚合过程的在线检测,进一步证实了mSt在氘代苯为溶剂,THF为调节剂下的负离子聚合以及异戊二烯在非极性条件下的溶液聚合都存在引发剂多元缔合体向二元缔合体转变.研究还发现,少量THF可能使n-BuLi的六元缔合结构2～3个进一步串联起来,但先于六元缔合结构解离.此外,THF与n-BuLi作用,随着n-BuLi/THF的摩尔比从1∶1到1∶5的变化,可以使n-BuLi的巨大缔合体解离并向六元缔合体转变.     

Influence of clay on the morphology and phase separation behavior of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends

The effect of clay on the morphology and phase-separation behavior of poly(methyl methacrylate)/poly(styreneco-acrylonitrile)(PMMA/SAN) blends and the variation of clay dispersion have been investigated. With the evolution of phase separation in PMMA/SAN, most of the clays are first located at the boundaries between PMMA and SAN, and then gradually move to the PMMA-rich domain, owing to the affinity of clay to PMMA. The introduction of clay causes the increase of binodal and spinodal temperatures of PMMA/SAN and enlarges their metastable region, indicating the phase stabilizing effect of clay on the matrix. But the influence of clay on the cloud points obviously depends on the composition of PMMA/SAN. The selective adsorption of PMMA on the clay results in the difference between the composition of surface layer and that of polymer matrix. Hence, the clay plays the role of an agent changing the conditions of phase structure formation.     

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

A copolymer of poly(acrylonitrile-co-styrene) (SAN) was synthesized via an emulsion polymerization method. Novel polymer electrolyte membranes cast from the blends of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), SAN and fumed silica (SiO2) are microporous and can be used in polymer lithium-ion batteries. The membrane shows excellent characteristics such as high ionic conductivity and good mechanical strength when the mass ratio between SAN and PVDF-HFP and SiO2 is 3.5/31.5/5. The ionic conductivity of the membrane soaked in a liquid electrolyte of 1 mol/L LiPF6/EC/DMC/DEC is 4.9×10-3 S cm-1 at 25℃. The membrane is electrochemical stable up to 5.5 V versus Li /Li in the liquid electrolyte. The influences of SiO2 content on the porosity and mechanical strength of the membranes were studied. Polymer lithium-ion batteries based on the membranes were assembled and their performances were also studied.