脉冲激光沉积制备SrSn1-xCoxO3外延薄膜的微结构表征及能带调控

钙钛矿结构SrSnO₃因其独特的介电和半导体性质而备受关注,通过掺杂可显著调控其电学、磁学性能,拓宽其应用范围。本研究在单晶SrTiO₃(001)衬底上通过脉冲激光方法外延生长了SrSn_1-xCo_xO₃ (x = 0, 0.16, 0.33, 0.5) (SSCO)薄膜,探究了Co含量对薄膜结晶性、微观结构、光学性能以及介电性能的影响。结果表明, SrSn_1-xCo_xO₃薄膜可在SrTiO₃(001)衬底上外延生长, Co掺杂不会导致薄膜结晶质量的劣化。薄膜表面形貌平整、致密,膜厚200 nm,表面粗糙度为0.44 nm。随薄膜中Co掺杂量增加,薄膜透过率从90%降至25%,光学带隙从4.24 eV降至2.44 eV。介电性能测试表明,掺杂薄膜在10⁶Hz时介电常数为70.1,比无掺杂SrSnO₃薄膜提高57%。室温时SSCO薄膜表面电阻率为172 MΩ,在1000℃范围内薄膜结构稳定。     

Ca掺杂的CeO2模型催化剂的形貌和电子结构及其与CO2分子的相互作用

利用扫描隧道显微镜、X射线光电子能谱和同步辐射光电子能谱研究了CeO₂(111),部分还原的CeO_2-x(111) (0＜x＜0.5)以及Ca掺杂的CeO₂模型催化剂的形貌、电子结构以及它们与CO₂分子间的相互作用。CeO₂(111)和部分还原的CeO_2-x(111)薄膜外延生长于Cu(111)单晶表面。不同Ca掺杂的CeO₂薄膜是通过在CeO₂(111)薄膜表面室温物理沉积金属Ca及随后真空退火到不同温度而得到的。不同的制备过程导致样品具有不同的表面组成,化学态和结构。CO₂吸附到CeO₂和部分还原的CeO_2-x表面后导致表面羧酸盐的形成。此外,相比于CeO₂表面,羧酸盐物种更易在部分还原的CeO_2-x表面生成,而且更加稳定。而在Ca掺杂的氧化铈薄膜表面,Ca²⁺离子的存在有利于CO₂的吸附,且探测到碳酸盐物种的形成。     

Ce/Zr物质的量比对Ru/CexZr1-xO2催化剂的性质及其湿式氧化苯酚性能的影响

采用溶胶凝胶法制备了系列不同Ce/Zr物质的量比的Ru/Ce_xZr_1-xO₂催化剂,通过X射线衍射（XRD）、氮气吸附-脱附、拉曼（Raman）光谱、储氧能力（oxygen storage capacity,OSC）、热重（TG）以及吡啶红外（Py-FTIR）等手段对其进行了表征,考察了该催化剂在湿式氧化苯酚反应中的性能。结果表明,ZrO₂可与CeO₂形成固溶体;随着ZrO₂掺杂量的增加,Ce_xZr_1-xO₂固溶体的OSC值增大。相比于CeO₂,掺杂ZrO₂后催化剂表面的L酸量明显增多。催化剂湿式氧化（catalytic wet air oxidation,CWAO）性能与OSC和表面酸性均有密切的关系：催化剂表面的L酸有利于苯酚氧化生成CO₂,而OSC过高会导致催化剂表面积炭,使催化剂失活。当ZrO₂掺杂量为25%时,在160℃、2 MPa纯氧条件下,催化氧化苯酚5 h后,苯酚转化率和总有机碳（total organic carbon,TOC）去除率分别为100%和99%,说明该催化剂具有优异的苯酚氧化性能。     

Pu在Gd2Zr2O7基质中的模拟固化: (Gd1-xCex)2Zr2O7+x的热物理性能研究

采用高温固相反应,以NaF作助熔剂,在1000 ℃的温度下合成了锕系元素Pu的模拟固化体(Gd_1-xCe_x)₂Zr₂O_7+x (0 ≤ x ≤ 0.7).研究了模拟固化体的物相、热膨胀系数(TEC)、热导率(TC)随温度及组成的变化规律.粉末X射线衍射(XRD)测试结果表明: Gd₂Zr₂O₇基质本身呈弱有序烧绿石结构,而用Ce⁴⁺取代Gd³⁺的模拟固化体都呈缺陷萤石结构. (Gd_1-xCe_x)₂Zr₂O_7+x的Ce(3d) X射线光电子能谱(XPS)有六个峰,结合能分别位于881.7, 888.1, 897.8, 900.4, 907.1, 916.1 eV处,与CeO2的XPS图谱非常相似,说明Ce为四价.随着温度的升高,所有样品的热膨胀系数总体上呈增大趋势.在室温至750 ℃附近,大部分样品的热导率随温度的升高而降低,之后热导率又呈小幅上升.在相同温度下,固化体(Gd_1-xCe_x)₂Zr₂O_7+x (0 ≤ x ≤ 0.7)的热膨胀系数及热导率随组成变化呈相同趋势:在0 ≤ x ≤ 0.1范围内随x的增大而增大,随后在x = 0.1-0.7时逐渐减小.     

ZrO2掺杂铌基二氧化铅电极制备及其甲基橙降解电催化性能

本文利用电沉积制得ZrO₂掺杂铌基二氧化铅电极,通过扫描电镜（SEM）和X射线衍射（XRD）观察表征了Nb/ZrO₂+PbO₂电极表面形貌特征及组成. 用线性伏安曲线、电化学交流阻抗和循环伏安曲线测试了Nb/ZrO₂+PbO₂电极电化学性能,及其甲基橙（MO）的降解电催化效果. 结果表明,ZrO₂掺杂使Nb/PbO₂电极表面更致密、粗糙,结晶尺寸更小,增大了电极比表面积,提高了电极电催化活性. Nb/ZrO₂+PbO₂电极活性层主要由β-PbO₂和少量的α-PbO₂以及部分ZrO₂共沉积而成. 有较高的析氧电位、吸附电容和较低的电荷转移电阻,其甲基橙（MO）降解电催化活性更佳,降解过程受扩散控制.     

Zr掺杂对PdO/Ce1-xPdxO2-δ催化剂CO和CH4催化氧化的影响

采用溶液燃烧法制备出PdO/PdO/Ce_1-xPd_xO_2-δ （PdO/CP）和PdO/Ce1-x-yPdxZryO₂-δ （PdO/CPZ）催化剂,通过硝酸处理去除催化剂表面的PdO物种得到对应的PdO/Ce_1-xPd_xO_2-δ （CP）和Ce1-x-yPdxZryO₂-δ （CPZ）催化剂。考究四种催化剂（PdO/CP、PdO/CPZ、CP、CPZ）对CO和CH₄的氧化活性,并计算得出表面PdO和Pdⁿ⁺物种的转化频率（TOF）。结果表明Zr的添加对PdO催化剂上CO和CH₄的催化氧化活性具有不同的影响。Zr的添加对PdO/CPZ和CPZ催化剂的CO催化活性具有明显的促进作用,前者归因于PdO/CPZ催化剂表面生成了更小颗粒的PdO粒子,后者归因于CPZ催化剂中含有更多的氧空位。对于CH₄的催化氧化,Pdⁿ⁺物种起到关键的作用。由于Zr的掺杂导致CeO₂的晶格中Pd物种的含量减少,致使PdO/CPZ催化剂和CPZ催化剂对CH₄氧化活性的降低。     

BiVO4/CuBi2O4薄膜光电极的制备及光电性能

通过金属有机物分解法(MOD)协同光电化学沉积法, 将p型氧化物半导体CuBi₂O₄沉积在BiVO₄纳米薄膜上, 形成包覆性异质结结构, 制备了一种新型p-n异质结光阳极n-BiVO₄/p-CuBi₂O₄, 用于太阳能光电化学(Photoelectrochemical, PEC)水分解. 研究结果表明, 在1.23 V(vs. RHE)电势下, BiVO₄/CuBi₂O₄ 异质结光阳极表现出优良的PEC水氧化性能, 光电流密度达到2.8 mA/cm², 负载磷酸钴(Co-Pi)的BiVO₄/CuBi₂O₄/Co-Pi光电极, 光电流密度达到4.45 mA/cm², 分别为BiVO₄电极光电流密度的3.1倍和4.9倍. X射线衍射(XRD)、 紫外-可见吸收光谱(UV-Vis)、 电化学阻抗谱(EIS)和能级结构图等结果也证实, BiVO₄/CuBi₂O₄和BiVO₄/CuBi₂O₄/Co-Pi复合电极材料在内建电场和能带弯曲作用下, 光吸收特性增强, 载流子界面转移电阻减小, 具有良好的光电化学性能与稳定性.     

Pr-PVP掺杂Ti/PbO2电极制备及其在有机物降解中的应用

在Ti基体上,采用电沉积法制备了镨和聚乙烯吡咯烷酮(PVP)掺杂的Ti/SnO₂-Sb₂O₃/Pr₂O₃-PVP-PbO₂ 电极. SEM显示Ti/SnO₂-Sb₂O₃/Pr₂O₃-PVP-PbO₂ 电极表面颗粒细化,镀层结构更加致密和均匀,XRD 测试表明掺杂使可以使电极的表面颗粒变小.循环伏安 (CV)分析表明共掺杂改性后的电极电催化活性明显提高.强化寿命测试显示Ti/SnO₂-Sb₂O₃/Pr₂O₃-PVP-PbO₂ 电极稳定性更好,使用寿命更长. 将所制备的电极应用于亚甲基蓝(MB)模拟染料废水的降解测试,与常规的Ti/PbO₂ 电极相比,Ti/SnO₂-Sb₂O₃/Pr₂O₃-PVP-PbO₂ 电极对亚甲基蓝具有更好的脱色率和 COD 除去率. 降解120min 后,对30 mg·L ^-1 亚甲基蓝的去除率分别可达到99%,对COD去除率为87.9%.     

CoMo/ZrO2-Al2O3催化剂的制备及其加氢脱氧性能

以ZrOCl₂·6H₂O和Al₂(SO₄)₃为原料,采用超声波共沉淀法制得一系列不同ZrO₂质量分数的ZrO₂- Al₂O₃复合氧化物载体;并以该复合氧化物为载体,采用等体积浸渍法制得Co和Mo质量分数分别为6.0%和16.0%的CoMo/ZrO₂-Al₂O₃催化剂。BET、XRD、H₂-TPR和NH₃-TPD等表征结果表明,ZrO₂-Al₂O₃复合氧化物载体具有较高的比表面积与较大的孔容、孔径,随着复合载体中ZrO₂质量分数的增加,复合载体比表面积逐渐减小。ZrO₂-Al₂O₃复合载体能高度分散活性组分,钴钼负载量接近其在载体上的单层分散阈值。相比于CoMo/Al₂O₃,CoMo/ZrO₂-Al₂O₃催化剂具有较高的还原性能和较多的表面酸性活性中心,由此导致其在苯酚加氢脱氧(HDO)反应中,具有较高的加氢脱氧活性和苯选择性。
     

Ta/Al-Fe2O3薄膜电极的制备及其光电催化降解亚甲基蓝性能

采用简单的涂滴法制备出新型的Al、Ta 共掺杂的三元铁氧化物(Ta/Al-Fe₂O₃)可见光响应型光催化薄膜. 运用X射线光电子能谱(XPS)和紫外-可见(UV-Vis)光谱等手段对其进行了表征, 考察了其光电化学性能, 并研究了复合电极光电催化降解亚甲基蓝(MB)废水的反应性能. 由表面谱学分析可知, Ta 和Al 成功掺入Fe₂O₃中, Ta 会改变催化剂表面Al 和O的化学环境. 在可见光照射下的光电催化(PEC)反应中, Ta/Al-Fe₂O₃降解MB的反应速率约为Al-Fe₂O₃的2 倍, 光电催化共作用的效果优于单纯光催化作用(PC)和电催化(EC)作用的效果.结果表明, Ta掺杂有利于提高Ta/Al-Fe₂O₃薄膜的光电催化活性.     

柠檬酸溶胶-凝胶法制备的Ce1-xZrxO2: 结构及其氧移动性

采用 XRF、XRD、Raman、XPS、H₂-TPR 以及与氩离子刻蚀相结合的XPS等表征技术对柠檬酸溶胶-凝胶法制备的Ce_1-xZr_xO₂ (0≤x≤1)样品的结构及其氧移动性进行了研究. 结果表明, Ce_1-xZr_xO₂ 样品的晶型结构对其中氧的移动性有明显影响. 当x≤0.15 时, Ce_1-xZr_xO₂ 以立方CeO₂相 Ce-Zr-O 固溶体存在, 随着Zr含量的逐渐增加, CeO₂晶胞体积减小、氧空位浓度增加, 氧移动性逐渐增强; 当x＞0.15时, 形成四方ZrO₂相和立方CeO₂相Ce-Zr-O固溶体的混合物, 随着Zr含量的逐渐增加, 四方ZrO₂相的含量增加、氧空位浓度减小, 氧移动性逐渐减弱. 因此, Ce_0.852Zr_0.152O₂样品具有最高的氧移动性.     

高镍正极材料中钴元素的替代方案及其合成工艺优化

高镍三元正极材料LiNi_xMn_yCo_1-x-yO₂ (x > 0.8)因其高能量密度而备受瞩目。在高镍三元正极材料中,Co不但有助于增强层状正极材料结构稳定性,而且能够提高正极材料导电性能,因此被认为是一种非常重要的元素。但是由于目前全球范围内钴矿资源紧缺,在一定程度上限制了含钴正极材料在新能源电动汽车领域的发展应用。基于此,本文将不同的过渡金属离子掺杂到高镍层状材料中形成无钴化正极材料,并进行高镍正极材料无钴化的可行性分析。通过实验对比发现,资源存储量丰富并且价格低廉的Zr在一定程度上可以取代Co元素,得到的正极材料LiNi_0.85Mn_0.1Zr_0.05O₂表现出良好的电化学性能,在0.2C倍率以及2.75–4.3 V的截止电压范围内,其放电比容量为179.9 mAh·g^-1,80周容量保持率为96.52%。     

杂多酸/离子液体杂化材料催化苯的高选择性羟基化

制备了V取代的磷钼酸H_3+xPMo_12-xV_xO₄₀（x=0,1,2）及1-丁基-3-甲基咪唑溴盐离子液体（[C₄mim]Br）,并采用离子交换的方法制备了系列杂化材料（[C₄mim]3+xPMo_12-xV_xO₄₀,x=0,1,2）;采用X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）、紫外-可见漫反射光谱（UV-Vis DRS）对所制备样品进行了表征;以H₂O₂为氧化剂,考察了所得样品催化苯羟基化制苯酚的活性。结果表明,和相应的离子液体及杂多酸相比,杂化材料的催化活性得到了很大的提高,尤其是催化剂[C₄mim]₅PMo₁₀V₂O₄₀,在优化后的条件下,苯的转化率可达到21%,苯酚的选择性在99%以上。而且,该催化剂具有很好的可重复使用性,连续使用五次后,苯的转化率和苯酚的选择性没有明显降低。     

Zr的添加对稀燃天然气汽车尾气净化催化剂Pd-Pt/Al2O3性能的影响

Pd-Pt双金属基甲烷氧化催化剂的催化活性、抗水热老化性和耐硫性在一个通有模拟稀燃天然气汽车尾气成分的固定床反应器中进行检测.研究发现Zr掺杂的Pd-Pt/Al₂O₃ (Pd-Pt/Zr_xAl_(1-x)O_(3+x)/2)提高了催化的催化活性、抗水热老化性和耐硫性.以共沉淀法制备Zr : Al的摩尔比分别为0 : 1、0.25 : 0.75、0.5 : 0.5、0.75 :0.25和1 : 0的材料为载体材料.双金属催化剂的活性组分分别为1.5% (w,质量分数)的Pd和0.3% (w)的Pt,活性组分Pd、Pt通过共浸渍的方法浸渍到以上载体材料上制备得到一系列整体式催化剂.分别采用低温N₂吸脱附、X射线衍射(XRD)、H₂程序升温还原(H₂-TPR)、O₂程序升温氧化(O₂-TPD)及X射线光电子能谱对制备的催化剂进行表征.结果显示Zr的加入使催化剂的载体材料结晶度提高,活性组分的分散度也得到了相应的提高.同时二价Pd物种与周围电子密度分别增加.相比于Pd-Pt/Al₂O₃和Pd-Pt/ZrO₂催化剂,在不同条件预处理后, Zr的添加对催化剂的性能有明显的提高,其中催化剂Pd-Pt/Zr_0.5Al_0.5O_1.75展现了最好的催化活性、抗水热老化性以及耐硫性.     

全有机S型异质结PDI-Ala/S-C3N4光催化剂增强光催化性能

Organic photocatalysts have attracted attention owing to their suitable redox band positions, low cost, high chemical stability, and good tunability of their framework and electronic structure. As a novel organic photocatalyst, PDI-Ala (N, N'-bis(propionic acid)-perylene-3, 4, 9, 10-tetracarboxylic diimide) has strong visible-light response, low valence band position, and strong oxidation ability. However, the low photogenerated charge transfer rate and high carrier recombination rate limit its application. Due to the aromatic heterocyclic structure of g-C₃N₄ and large delocalized π bond in the planar structure of PDI-Ala, g-C₃N₄ and PDI-Ala can be tightly combined through π–π interactions and N―C bond. The band structure of sulfur-doped g-C₃N₄ (S-C₃N₄) matched well with PDI-Ala than that with g-C₃N₄. The electron delocalization effect, internal electric field, and newly formed chemical bond jointly promote the separation and migration of photogenerated carriers between PDI-Ala and S-C₃N₄. To this end, a novel step-scheme (S-scheme) heterojunction photocatalyst comprising organic semiconductor PDI-Ala and S-C₃N₄ was prepared by an in situ self-assembly strategy. Meanwhile, PDI-Ala was self-assembled by transverse hydrogen bonding and longitudinal π–π stacking. The crystal structure, morphology, valency, optical properties, stability, and energy band structure of the PDI-Ala/S-C₃N₄ photocatalysts were systematically analyzed and studied by various characterization methods such as X-ray diffraction, transmission electron microscopy, energy dispersive X-ray spectrometry, X-ray photoelectron spectroscopy, ultraviolet visible diffuse reflectance spectroscopy, electrochemical impedance spectroscopy, and Mott-Schottky curve. The work functions and interface coupling characteristics were determined using density functional theory. The photocatalytic activities of the synthesized photocatalyst for H₂O₂ production and the degradation of tetracycline (TC) and p-nitrophenol (PNP) under visible-light irradiation are discussed. The PDI-Ala/S-C₃N₄ S-scheme heterojunction with band matching and tight interface bonding accelerates the intermolecular electron transfer and broadens the visible-light response range of the heterojunction. In addition, in the processes of the PDI-Ala/S-C₃N₄ photocatalytic degradation reaction, a variety of active species (h⁺, ·O₂^-, and H₂O₂) were produced and accumulated. Therefore, the PDI-Ala/S-C₃N₄ heterojunction exhibited enhanced photocatalytic performance in the degradation of TC, PNP, and H₂O₂ production. Under visible-light irradiation, the optimum 30%PDI-Ala/S-C₃N₄ removed 90% of TC within 90 min. In addition, 30%PDI-Ala/S-C₃N₄ displayed the highest H₂O₂ evolution rate of 28.3 μmol·h^-1·g^-1, which was 2.9 and 1.6 times higher than those of PDI-Ala and S-C₃N₄, respectively. These results reveal that the all organic photocatalyst comprising PDI-based supramolecular and S-C₃N₄ can be efficiently applied for the degradation of organic pollutants and production of H₂O₂. This work not only provides a novel strategy for the design of all organic S-scheme heterojunctions but also provides a new insight and reference for understanding the structure–activity relationship of heterostructure catalysts with effective interface bonding.      

球形表面富锰MnxCo3−xO4−ƞ尖晶石型催化剂选择性催化还原NOx研究

采用共沉淀法制备了高比表面积的Mn_xCo_3−xO₄球形催化剂,研究了NH₃选择性催化还原NO_x性能。Mn-Co金属氧化物具有尖晶石结构,随着Co含量的增加,晶体结构由四方相转变为立方相。高浓度的表面活性氧物种和变价元素的强有效电子转移(Co³⁺ + Mn³⁺ ↔ Co²⁺ + Mn⁴⁺)有利于提高Mn_xCo_3−xO₄ (x = 1.0、1.5、2.0)尖晶型石催化剂的氧化还原能力,催化剂表面的Mn富集作用形成了氧缺陷结构和丰富的表面活性位点,进一步促进SCR脱硝反应,呈现出优异的催化性能。Co_tet(CoMn)_octO₄晶体结构中,Mn离子(Mn³⁺和Mn⁴⁺,以三价锰为主)和部分Co离子被配置到八面体中心,这些物种作为活性位点存在着较强的电子转移交互作用,该构型对促进低温脱硝活性和保护活性位点耐受SO₂毒害具有重要的意义。Mn-Co尖晶石表面的NH₃-SCR脱硝反应过程主要遵循Eley-Rideal反应机理,即吸附态NH₃与气态NO (或NO₂)的反应路径。随着反应温度的增加,反应生成的NH₄NO₃中间体很可能转化为NH₄NO₂物种,进而分解为N₂,提高了催化剂的氮气选择性。     

1D Mn0.2Cd0.8S纳米棒/2D Ti3C2纳米片肖特基异质结的构建及光催化产氢性能研究

Sustainable photocatalytic H₂ evolution has attracted extensive attention in recent years because it can address both energy shortage and environmental pollution issues. In particular, metal sulfide solid-solution photocatalysts have been widely applied in photocatalytic hydrogen generation owing to their excellent light harvesting properties, narrow enough band gap, and suitable redox potentials of conduction and valance bands. However, it is still challenging to develop low-cost and high-efficiency sulfide solid-solution photocatalysts for practical photocatalytic hydrogen evolution. Recently, 1D Mn_xCd_1-xS nanostructures have shown superior light absorption, charge separation, and H₂-evolution activity owing to their shortened diffusion pathway of carriers and high length-to-diameter ratios. Thus, 1D Mn_xCd_1-xS nanostructures have been applied in photocatalytic H₂ evolution. However, a single Mn_xCd_1-xS photocatalyst still has some disadvantages for photocatalytic H₂ evolution, such as the rapid recombination of photogenerated electron-hole pairs and low quantum efficiency. Herein, to further boost the separation of photogenerated charge carriers and H₂-evolution kinetics, an in situ solvothermal method was used to synthesize the 1D/2D Schottky-based heterojunctions between the Mn_0.2Cd_0.8S nanorods (MCS NRs) and Ti₃C₂ MXene nanosheets (NSs). Furthermore, various characterization methods have been used to investigate the crucial roles and underlying mechanisms of metallic Ti₃C₂ MXene NSs in boosting the photocatalytic H₂ evolution over the Mn_0.2Cd_0.8S nanorods. X-ray Diffraction (XRD), Transmission Electron Microscope (TEM), High Resolution Transmission Electron Microscopy (HRTEM), element mapping images, and X-ray Photoelectron Spectroscopy (XPS) results clearly demonstrate that hybrid low-cost Schottky-based heterojunctions have been successfully constructed for practical applications in photocatalytic H₂ evolution. Additionally, the photocatalytic hydrogen evolution reaction (HER) was also carried out in a mixed solution of Na₂SO₃ and Na₂S using as the sacrificial agents. The highest hydrogen evolution rate of the optimized 1D/2D Schottky-based heterojunction is 15.73 mmol·g^-1·h^-1, which is 6.72 times higher than that of pure MCS NRs (2.34 mmol·g^-1·h^-1). An apparent quantum efficiency of 19.6% was achieved at 420 nm. The stability measurements of the binary photocatalysts confirmed their excellent photocatalytic stability for practical applications. More interestingly, the UV-Vis diffuse reflection spectra, photoluminescence (PL) spectrum, transient photocurrent responses, and Electrochemical Impedance Spectroscopy (EIS) Nyquist plots clearly confirmed the promoted charge separation between the MCS NRs and Ti₃C₂ MXene NSs. The linear sweep voltammetry also showed that the loading of MXene cocatalysts could greatly decrease the overpotential of pure MCS NRs, suggesting that the 2D Ti₃C₂ NSs could act as an electronic conductive bridge to improve the H₂-evolution kinetics. In summary, these results show that the 2D/1D hybrid Schottky-based heterojunctions between metallic Ti₃C₂ MXene NSs and MCS NRs can not only improve the separation of photogenerated electrons and holes but also decrease the H₂-evolution overpotential, thus resulting in significantly enhanced photocatalytic H₂ generation. We believe that this study will inspire new ideas for constructing low-cost Schottky-based heterojunctions for practical applications in photocatalytic H₂ evolution.      

Ce-Zr-O2上CuO分散性对CO氧化活性的影响

采用柠檬酸法制备了Ce-Zr-O₂固溶体, 并负载了过渡金属和贵金属Pt, 其中, 以Cu作为活性组分, 在CO氧化反应中表现出最高的活性, CO完全转化的温度约为120 ℃, 明显高于负载1%Pt(质量分数)催化剂的活性. 掺杂少量Zr到CeO₂(Ce_0.8Zr_0.2O₂)中对Cu基催化剂有非常好的促进作用. 分别采用等体积浸渍法(IW)、 沉淀沉积法(DP)、 水热法(HT)以及柠檬酸法(CA)制备了Cu负载质量分数为20%的Cu/Ce_0.8Zr_0.2O₂催化剂. 结果表明, 由沉淀沉积法制备的Cu/Ce_0.8Zr_0.2O₂催化剂的活性最高, 在100 ℃时, CO可完全转化. TEM结果表明, CuO物种很好地分散在Ce_0.8Zr_0.2O₂上. 吸附实验数据表明, Cu基催化剂上CO与O₂之间较弱的竞争吸附是其活性高于Pt催化剂的主要原因. Cu基催化剂上的氧空位对促进O₂的吸附具有重要作用, 也是影响CO低温氧化的重要因素之一.