Comparison of nanostructured silver-modified silver and carbon ultramicroelectrodes for electrochemical detection of nitrate

We report the use of silver (Ag)-modified carbon and Ag ultramicroelectrodes (UMEs) for electrochemical detection of nitrate. We investigated several methods for electrodeposition of Ag; our results show that the addition of a complexation agent (ammonium sulfate) in the Ag deposition solution is necessary for electrodeposition of nanostructured Ag that adheres well to the electrode. The electrodeposited Ag on both types of electrodes has branch-like structures that are well-suited for electrocatalytic reduction of nitrate. The use of UMEs is advantageous; the sigmoidal-shaped cyclic voltammogram allows for sensitive detection of nitrate by reducing the capacitive current, as well as enabling easy quantification of the nitrate reduction current. Both cyclic voltammetry and chronoamperometry were used to characterize the electrodes; and independent of the electrochemical interrogation technique, both UMEs were found to have a wide linear dynamic range (4–1000 μM) and a low limit of detection (3.2–5.1 μM). More importantly, they are reusable up to ∼100 interrogation cycles and are selective enough to be used for direct detection of nitrate in a synthetic aquifer sample without any sample pretreatment and/or pH adjustment.     

Monitoring of vesicular exocytosis from single cells using micrometer and nanometer-sized electrochemical sensors

Communication between cells by release of specific chemical messengers via exocytosis plays crucial roles in biological process. Electrochemical detection based on ultramicroelectrodes (UMEs) has become one of the most powerful techniques in real-time monitoring of an extremely small number of released molecules during very short time scales, owing to its intrinsic advantages such as fast response, excellent sensitivity, and high spatiotemporal resolution. Great successes have been achieved in the use of UME methods to obtain quantitative and kinetic information about released chemical messengers and to reveal the molecular mechanism in vesicular exocytosis. In this paper, we review recent developments in monitoring exocytosis by use of UMEs-electrochemical-based techniques including electrochemical detection using micrometer and nanometer-sized sensors, scanning electrochemical microscopy (SECM), and UMEs implemented in lab-on-a-chip (LOC) microsystems. These advances are of great significance in obtaining a better understanding of vesicular exocytosis and chemical communications between cells, and will facilitate developments in many fields, including analytical chemistry, biological science, and medicine. Furthermore, future developments in electrochemical probing of exocytosis are also proposed. Figure In this paper, we review recent developments in monitoring the exocytosis by use of UMEs-electrochemical-based techniques including electrochemical detection using micrometer and nanometer-sized sensors, Scanning Electrochemical Microscopy (SECM) and UMEs implemented in lab-on-a-chip (LOC) microsystems. These advances are of great significance in obtaining a better understanding of vesicular exocytosis and chemical communications between cells, and will facilitate developments in many fields including analytical chemistry, biological science and medicine. Furthermore, future developments in electrochemical probing of exocytosis are proposed.

On-chip multi-electrochemical sensor array platform for simultaneous screening of nitric oxide and peroxynitrite

In this work we report on the design, microfabrication and analytical performances of a new electrochemical sensor array (ESA) which allows for the first time the simultaneous amperometric detection of nitric oxide (NO) and peroxynitrite (ONOO(-)), two biologically relevant molecules. The on-chip device includes individually addressable sets of gold ultramicroelectrodes (UMEs) of 50 μm diameter, Ag/AgCl reference electrode and gold counter electrode. The electrodes are separated into two groups; each has one reference electrode, one counter electrode and 110 UMEs specifically tailored to detect a specific analyte. The ESA is incorporated on a custom interface with a cell culture well and spring contact pins that can be easily interconnected to an external multichannel potentiostat. Each UME of the network dedicated to the detection of NO is electrochemically modified by electrodepositing thin layers of poly(eugenol) and poly(phenol). The detection of NO is performed amperometrically at 0.8 V vs. Ag/AgCl in phosphate buffer solution (PBS, pH = 7.4) and other buffers adapted to biological cell culture, using a NO-donor. The network of UMEs dedicated to the detection of ONOO(-) is used without further chemical modification of the surface and the uncoated gold electrodes operate at -0.1 V vs. Ag/AgCl to detect the reduction of ONOOH in PBS. The selectivity issue of both sensors against major biologically relevant interfering analytes is examined. Simultaneous detection of NO and ONOO(-) in PBS is also achieved.     

Nanoelectrodes, nanoelectrode arrays and their applications

This review deals with the topic of ultrasmall electrodes, namely nanoelectrodes, arrays of these and discusses possible applications, including to analytical science. It deals exclusively with the use of nanoelectrodes in an electrochemical context. Benefits that accrue from use of very small working electrodes within electrochemical cells are discussed, followed by a review of methods for the preparation of such electrodes. Individual nanoelectrodes and arrays or ensembles of these are addressed, as are nanopore systems which seek to emulate biological transmembrane ion transport processes. Applications within physical electrochemistry, imaging science and analytical science are summarised.     

Model Biological Membranes and Possibilities of Application of Electrochemical Impedance Spectroscopy for their Characterization

Biological membranes are essential parts of living systems. They represent an interface between intracellular and extracellular space. Depending on their structure, they often perform very complex functions and play an important role in the transport of both charged and uncharged particles in any organism. Structure of the biological membranes, which play very important role in electrochemical processes inside living organisms, is very complicated and still not precisely defined and explained. Model lipid membranes are used to gain detail information about properties of real biological membranes and about associated electrochemical processes. Electrochemistry, especially electrochemical impedance spectroscopy (EIS), can play a useful role in the characterization of properties of model lipid membranes (planar and supported lipid bilayers, tethered lipid membranes, liposomes, etc.). This review is focused on model biological membranes and the possibilities and limitations of electrochemical methods and namely of EIS in this field.     

Carbon Nanotubes Modified Graphite Electrodes for Monitoring of Biointeraction Between 6‐Thioguanine and DNA

In this present study, single‐walled carbon nanotubes (SWCNT) modified disposable pencil graphite electrodes (SWCNT‐PGEs) were developed for the electrochemical monitoring of anticancer drug, and its interaction with double stranded DNA (dsDNA). Under this aim, SWCNT‐PGEs were applied for the first time in the literature to analyse of 6‐Thioguanine (6‐TG), and also to investigate its interaction with DNA by voltammetric and impedimetric methods. The surface morphologies of PGE and SWCNT‐PGE were explored using scanning electron microscopy (SEM) and electrochemical characterization of unmodified/modified electrodes was performed by cyclic voltammetry (CV). Experimental parameters; such as, the concentration of 6‐TG and its interaction time with dsDNA were optimized by using differential pulse voltammetry (DPV). Additionally, the interaction of 6‐TG with dsDNA was studied in case of different interaction times by electrochemical impedance spectroscopy (EIS) in contrast to voltammetric results. The detection limit of 6‐TG was found to be 0.25 μM by SWCNT‐PGE.     

甲基纤维素(MC)疏水作用的电化学研究

应用电化学循环伏安法, 以电活性小分子亚甲基蓝(MB)为探针, 研究了不同温度下修饰在玻碳电极表面的甲基纤维素(MC)凝胶的疏水性. 研究发现, 在45～70 ℃温度范围内, MB在MC凝胶修饰电极上的式电位E⁰⁽较相应的裸电极均正移, 氧化峰电流i_pa和还原峰电流i_pc分别较相应裸电极增大, 且随温度升高而增大. 这些结果表明MC分子之间发生了疏水相互作用, 且随温度的升高, 疏水作用增强. 此外, 在上述温度下, MC凝胶修饰电极上峰电流的比值i_pc/i_pa均小于1, 为0.70, 且没有观察到MB单独的吸附峰, 因此MB分子在凝胶修饰电极上发生了弱吸附. 本文研究显示电化学方法是研究该类多糖凝胶机理的一个补充手段.     

The counter electrode in electrochemical lithium recovery

Electrochemical lithium extraction methods have recently attracted significant attention as alternatives to the currently employed techniques. A considerable effort has been made to develop this technology, especially in searching Li-ion selective electrodes. However, much less attention has been paid to the counter electrodes. In general, these materials have been used as counterparts without considering their influence in the global method. This review summarizes the counter electrodes, analyzing their pros and cons. In addition, the energy efficiency of the various configurations was reported, while the other performance indices were not included because of the lack of data provided in the literature. Nevertheless, their potential influence in crucial parameters like purity, efficiency, or stability was estimated based on their electrochemical properties. This review demonstrates that specific studies on the counter electrodes and an effort to develop alternative materials are needed to push the current electrochemical lithium extraction method toward a new level.     

Investigation of Metal Ion Effect on Specific DNA Sequences and DNA Hybridization

In this article, we investigated the sequence specific interaction of single (ssDNA) and double stranded (dsDNA) with silver ions (Ag⁺) with electrochemical methods. We, for the first time, examined the effect of base sequences, base content and physiochemical properties of different DNA sequences on interaction with Ag⁺ in detail. We used different base contents to show how the composition of nucleic acid influences the electrochemical signals. We first immobilized ssDNA probes on bare graphite electrodes. Then, we showed the sequence effect on oxidation signals of AgDNA complex by sensing Ag⁺ to the probe coated surfaces to interact with different ssDNA sequences. Furthermore, we investigated the effect of Ag⁺ on dsDNA. We measured the oxidation signals obtained from Ag⁺‐ssDNA and Ag⁺‐dsDNA complex at approximately 0.2 V and 1.0 V (vs Ag/AgCl), respectively with Differential Pulse Voltammetry (DPV). We showed that the oxidation signals of the AgDNA complex obtained from dsDNA‐modified electrodes is higher than the electrodes modified with ssDNA. More importantly, we showed that Ag⁺‐ssDNA and Ag⁺ ion‐dsDNA exhibit different electrochemical behaviors.     

Effect of High Humidity Exposure to Wheat Starch Based High Conducting Flexible Polymer-in-Salt-Electrolyte

Polymer-in-salt-electrolytes (PISEs) are an important class of electrolytes as they carry the promise of faster and single ion transport. Unfortunately, due to unavailability of a suitable polymer host PISE has still not reached to commercial level. In the present work, using a novel synthesis protocol developed by the group, glutaraldehyde crosslinked wheat starch has been successfully modified with sodium iodide (NaI) to synthesize a flexible PISE membrane with desired electrochemical properties. Present paper reports the effect of crosslinker and exposure to high humidity ambience on electrochemical and morphological properties. It has been established that on exposure to higher humidity atmosphere starch-based PISEs stabilize at lower resistance value, but with higher ion relaxation time, which indicates that effect of high humidity treatment is more on salt dissociation instead of assisting the ion transport. The studied materials have conductivity ≈0.01 S cm⁻¹ range with ESW >2.5 V, ensuring its usability in electrochemical devices. The developed synthesis protocol does not require any complicated synthesis route and/or sophisticated instrument hence the overall process is economical also, adding up to its potentiality for energy device fabrication.     

Electrochemical strategies for the label-free detection of amino acids, peptides and proteins

Electrochemical methods for the detection of amino acids, peptides, and proteins in a variety of media are reviewed. Label-free strategies in which the detection is based on the inherent electrochemical properties of the analyte are discussed. Various processes such as direct or mediated (in solution or immobilised) redox processes and interfacial ion transfers have been employed for the electrochemical detection and determination of the target analytes. The various methods covered encompass voltammetry at uncoated and modified electrodes and at immiscible liquid-liquid interfaces, potentiometry at polymer membrane electrodes and electrochemical impedance spectroscopy. The determination of the target analytes in complex biological matrices is discussed. The various approaches highlighted here illustrate the rich capabilities of electrochemical methods as simple, low-cost, sensitive tools for the determination of these important biological analytes at trace and ultra-trace levels.     

Emerging trends in miniaturized and microfluidic electrochemical sensing platforms

Electrochemical sensing has established a strong presence in diverse areas. The conventional electrochemical sensing approach consumes large sample volumes and reagents and requires bulky potentiostat, macro-electrodes, and other equipment. The synergistic integration of electrochemical sensing systems with miniaturized or microfluidic electrochemical devices and microelectrodes in a single platform provides rapid analysis with a disposable, reusable, and cost-effective platform for multiplexed point-of-care detections. Such microdevices have created scope for using several materials as electrodes and sensing platforms by using appropriate fabrication techniques. One of the most recent advancements in miniaturized devices includes the integration of automation and Internet of Things to realize fully automated and robust electrochemical microdevices. The review summarizes the emerging trends in fabrication methods of miniaturized and microfluidic devices, their multiple applications in real-time, integration of Internet of Things, automation, identifying research gaps with strategies for bridging these gaps, future outlook, and recent approaches to intelligent electrochemical sensing.     

Current signal amplification strategies in aptamer-based electrochemical biosensor:A review

Due to their high specificity and affinity towards various targets,along with other unique advantages such as stability and low cost,aptamers are widely applied in analytical techniques.A typical aptamerbased electrochemical biosensor is composed of a aptamer as the biological recognition element and transducer conve rting the biologic interaction into electrical signals for the quantitative measure ment of targets.Improvement of the sensitivity of a biosensor is significantly important in order to achieve the detection of biomolecules with low abundance,and different amplification strategies have been explored.The strategies either employ nanomaterials such as gold nanoparticles to construct electrodes which can trans fer the biological reactions more efficiently,or attempt to obtain enha nced signal through multi-labeled carriers or utilize enzyme mimics to catalyze redox cycling.This review discusses recent advances in signal amplification methods and their applications.Critical assessment of each method is also considered.     

Electroactivity of Nonconjugated Proteins and Peptides. Towards Electroanalysis of All Proteins

Present proteomics and biomedicine require sensitive analytical methods for all proteins. Recent progress in electrochemical analysis of peptides and proteins based on their intrinsic electroactivity is reviewed. Tyrosine and/or tryptophan‐containing proteins are oxidizable at carbon electrodes. At mercury electrodes all peptides and proteins (about 13 peptides and >25 proteins were tested) produce chronopotentiometric peak H at nanomolar concentrations. This peak is sensitive to changes in protein structure. Microliter sample volumes are sufficient for the analysis. Electrochemical methods can be used in studies of nucleic acid‐protein interactions and can be applied in biomedicine. Examples of such applications in neurogenerative diseases and cancer are presented.     

3D-printed electrochemical sensors: A new horizon for measurement of biomolecules

Electrochemical sensors are widely used to monitor biomolecules. However, limitations in sensor geometry have restricted the scope of currently used electrochemical sensors. 3D-printing has emerged as a promising manufacturing approach, to robustly make electrochemical sensors, that can stably measure in biological environments. This review highlights the recent trends in the development of 3D-printed electrodes and biosensors for measurement of biomolecules. Novel geometries of 3D-printed electrodes have provided the means to conduct ex vivo measurement in the intestinal tract and in vivo measurements in the brain. 3D-printing is providing the ability to manufacture electrochemical sensors that can measure biomolecules in diverse areas of the body.     

New perspectives in hydrogenase direct electrochemistry

Electrochemical studies of hydrogenases, the biological catalysts of H₂ oxidation and production, have proven wrong the old saying that enzymes do not easily transfer electrons to electrodes in the absence of mediators. Many distinct hydrogenases have actually been directly connected to electrodes or particles, for studying their catalytic mechanism or for designing solar-fuels catalysts. In this review, we list the electrodes that have proved successful for direct electron transfer to hydrogenases, and we discuss recent results which illustrate new directions in this research field: the study of the biosynthesis of FeFe hydrogenase, the electrochemical characterization of non-standard NiFe or FeFe hydrogenases, the general discussion of what makes a catalyst better in one particular direction of the reaction, and the elucidation of the molecular mechanisms of hydrogenase catalysis by combining electrochemistry and theoretical chemistry, spectroscopy or photochemistry. The electrochemical methods described herein will probably prove useful for studying or using other redox enzymes.     

Gold Nanoparticle Ensembles Allow Mechanistic Insights into Electrochemical Processes

Gold‐nanoparticle‐modified electrodes find wide and diverse applications in the area of electrochemistry. We demonstrate for the first time that gold‐nanoparticle‐modified electrodes can provide mechanistic information and we exemplify this with the electrochemical deposition of arsenic(III). Our approach of using nanoparticle ensembles is a facile and economical methodology that provides an alternative to using expensive gold single‐crystal electrodes that require careful surface preparation before each measurement.     

蛋白质相互作用预测、设计与调控

蛋白质相互作用是生命活动在分子水平上的基本事件. 蛋白质相互作用的三维图像可以给出关键生命活动过程的分子细节. 了解蛋白质相互作用的原理有助于揭示生命活动的机制, 并在此基础上开展有重要价值的蛋白质设计. 本文对于蛋白质相互作用预测、设计和调控研究的近期进展进行了总结归纳, 介绍了作者实验室在相关领域的研究进展, 并对今后的研究方向进行了展望. 主要包括: (1) 蛋白质相互作用网络、蛋白质相互作用机制和蛋白质复合物结构计算分析; (2) 基于序列、结合位点以及复合物结构的蛋白质相互作用预测; (3)蛋白质相互作用设计方法; (4) 利用化学分子调控蛋白质相互作用的方法; (5) 针对蛋白质相互作用的蛋白质药物设计方法.     

纳米材料修饰电极在重金属离子检测中的应用

本文介绍了近年来纳米材料修饰电极在重金属离子检测中的研究现状,分析了这些修饰电极的特点,重点阐述了纳米材料在重金属离子检测中的重要作用,列举了一些纳米材料修饰电极在重金属离子检测中的应用,最后对纳米材料修饰电极用于重金属离子的检测研究进行了简要评述和展望。     

Electroanalytical Applications of Microporous Zeolites and Mesoporous (Organo)Silicas: Recent Trends

Microporous zeolites and ordered mesoporous (organo)silicas have been widely used as electrode modifiers because of their attractive properties (ion exchange and size selectivity of zeolites, well ordered nanoreactors containing a high number of widely accessible active centers in mesoporous (organo)silicas). These properties have been intelligently combined to selected redox processes to improve the response of the resulting modified electrodes or to design novel electrochemical detection schemes. This up‐to‐date review provides the recent advances made in the electroanalytical applications of zeolite modified electrodes and discusses the interest of ordered mesoporous (organo)silica materials in electroanalysis.