Total phenol analysis of weakly supported water using a laccase-based microband biosensor

The monitoring of phenolic compounds in wastewaters in a simple manner is of great importance for environmental control. Here, a novel screen printed laccase-based microband array for in situ, total phenol estimation in wastewaters and for water quality monitoring without additional sample pre-treatment is presented. Numerical simulations using the finite element method were utilized for the characterization of micro-scale graphite electrodes. Anodization followed by covalent modification was used for the electrode functionalization with laccase. The functionalization efficiency and the electrochemical performance in direct and catechol-mediated oxygen reduction were studied at the microband laccase electrodes and compared with macro-scale electrode structures. The reduction of the dimensions of the enzyme biosensor, when used under optimized conditions, led to a significant improvement in its analytical characteristics. The elaborated microsensor showed fast responses towards catechol additions to tap water – a weakly supported medium – characterized by a linear range from 0.2 to 10 μM, a sensitivity of 1.35 ± 0.4 A M⁻¹ cm⁻² and a dynamic range up to 43 μM. This enhanced laccase-based microsensor was used for water quality monitoring and its performance for total phenol analysis of wastewater samples from different stages of the cleaning process was compared to a standard method.     

Micrometer-scale transient ion transport for real-time pH assay in living rat brains

Ion transport has been widely used for various applications such as sensing, desalination and energy conversion; however, nearly all applications are based on steady-state ion transport. Herein, we for the first time demonstrate the capability of transient ion transport for in vivo sensing with both high spatial (∼μm) and temporal (∼ms) resolution by using pH as the model target. Transient ion transport behavior (i.e., time-dependent ion current change) was observed by applying high-frequency pulse potential. Importantly, we proposed the ion distribution transient model for this time-dependent ion transport behavior. With this model, the temporal resolution of the as-developed pH microsensor based on ion current was improved to the ms level, thus satisfying the requirement of neurochemical recording. Moreover, our microsensor features good reproducibility, selectivity, and reversibility, and can thus real-time monitor the pH change in living rat brains. This study demonstrates the first example of in vivo sensing based on ion transport, opening a new way to neurochemical monitoring with ultrahigh spatiotemporal resolution. This study is also helpful to understand the transient process of asymmetric ion transport.

Micrometer-scale transient ion transport has been successfully used for constructing a high spatiotemporal resolution and performance microsensor, which could be used for real-time monitoring the change of pH in rat brains.     

RhIr@MoS2 nanohybrids based disposable microsensor for the point-of-care testing of NADH in real human serum

Dihydronicotinamide adenine dinucleotide (NADH) is an important enzyme in all living cells, which is found to be abnormally expressed in cancer cells. Since it is redox-active, an electrochemical detection method would be suitable for monitoring its concentration in biological fluids. Here we present a strategy for specific determination of NADH in real human serum by using RhIr@MoS₂ nanohybrids based microsensor. To implement the protocol, RhIr nanocrysrals are in-situ grown onto MoS₂ interlayers forming a nanohybrid structure (RhIr@MoS₂). After being locally deposited on an electrochemical microsensor, it could be used for the analysis of NADH. The developed RhIr@MoS₂ nanohybrids based microsensor possesses the ability for analyzing NADH at the applied potential of 0.07 V (much lower than most reported values). The detection limit is evaluated as low as 1 nmol/L even in bovine serum albumin (BSA) media. In addition, the sampling analysis of human serum from cancer patients and health controls shows that the microsensor displays good diagnostic sensitivity and specificity, illustrating that this developed detection technique is a relatively accurate method for measuring NADH in biological fluids. The proposed electrochemical microsensor assay also owns the benefits of convenience, disposable and easy processing, which make it a great possibility for future point-of-care cancer diagnosis.     

An inflammation self-adaptive nanocarrier for highly efficient gene therapy

Inflammation represents a real micromilieu of many diseases as well as the actual application environment of nanocarriers. However, few studies have focused on the influence of the inflammatory environment on the effects of nanoparticle delivery. Herein, a novel inflammation self-adaptive nanocarrier is designed and fabricated by attaching the ascorbyl palmitate (AP) onto the surface of gene-entrapped polymeric nanocomplexes through the formation of phenylboronate bond. In vitro and in vivo studies demonstrate that the introduction of AP enhances considerably the accumulation of entrapped gene in inflammation and facilitates the intracellular uptake of gene-loading nanoparticles. Meanwhile, the gene transfection efficiency of DNA and in vivo gene therapy of nanocomplexes under an inflammation stimulus is significantly enhanced. Hence, our delicate design concept opens up a new pathway to develop an inflammation self-adaptive drug delivery system for precise drug/gene delivery and therapy.     

Achieving high-performance Li2ZnTi3O8 anode for advanced Li-ion batteries by molybdenum doping

The Li₂ZnTi_3-xMo_xO₈ (x = 0, 0.05, 0.1 and 0.15) anode materials are successfully synthesized through a simple solid-state method, and few Li₂MoO₄ phase can be found in Li₂ZnTi_3-xMo_xO₈ (x = 0.1 and 0.15). All samples are composed of nanocrystalline particles and irregular micron-sized particles with a relatively uniform particle size of 100–200 nm Li₂ZnTi_2.9Mo_0.1O₈ shows the best electrochemical properties among all samples. The Li₂ZnTi_2.9Mo_0.1O₈ delivers a charge/discharge capacity of 188.1/188.2 mA h/g at 1 A/g after 400 cycles, but the corresponding capacity of pristine Li₂ZnTi₃O₈ is only 104.5 (102.2) mA h/g. The Mo⁶⁺ doping enhances the reversible capacity, rate performance, and cycling stability of Li₂ZnTi₃O₈, especially at large current densities. The improved electrochemical performance of Li₂ZnTi_3-xMo_xO₈ can be ascribed to the enhanced electrical conductivity, improved intercalation/de-intercalation reversibility of Li ions, increased lithium-ion diffusion coefficients, and reduced charge-transfer resistance. This work provides an effective strategy to construct high-performance anode materials for advanced lithium-ion battery; this effective design strategy may be used to enhance the reversible specific capacity, and rate the performance and cycle stability of other insertion-host anode materials.     

3D-printed electrochemical sensors: A new horizon for measurement of biomolecules

Electrochemical sensors are widely used to monitor biomolecules. However, limitations in sensor geometry have restricted the scope of currently used electrochemical sensors. 3D-printing has emerged as a promising manufacturing approach, to robustly make electrochemical sensors, that can stably measure in biological environments. This review highlights the recent trends in the development of 3D-printed electrodes and biosensors for measurement of biomolecules. Novel geometries of 3D-printed electrodes have provided the means to conduct ex vivo measurement in the intestinal tract and in vivo measurements in the brain. 3D-printing is providing the ability to manufacture electrochemical sensors that can measure biomolecules in diverse areas of the body.     

High Sensitive Microsensor Based on Organic‐Inorganic Composite for Two‐Dimensional Mapping of H2O2 by SECM

The present work describes the development of a selective, sensitive and stable sensing microsensor for scanning electrochemical microscopy (SECM) to measure H₂O₂ during electrochemical reduction of oxygen. The microsensor is based on graphene and Poly(3,4‐ethylenedioxythiophene) composite as support to iron (III) hexacyanoferrate (II) (PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor). The electrochemical properties of the PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor were investigated by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor showed an excellent electrocatalytic activity toward hydrogen peroxide (H₂O₂) reduction with a diminution of the overpotential of about 500 mV in comparison to the process at a bare gold microelectrode. The microsensor presented excellent performance for two dimensional mapping of H₂O₂ by SECM in 0.1 mol L^?1 phosphate buffer solution (pH 7.0). Under optimized conditions, a linear response range from 1 up to 1000 µmol L^?1 was obtained with a sensitivity of 0.08 nA L µmol^?1 and limit of detection of 0.5 µmol L^?1.     

Molybdenum trioxide hybridized kaempferol: double-powered nanosystem for salvaging oxidative stress and electrochemical immunoprobing of interleukin-6

Intracellular reactive oxygen species (iROS) are the culprit in inflammation-linked diseases. Excessive radical generation triggers an inflammation cascade involving interleukin-6 (IL-6) and other cytokines release, causing oxidative stress to cells. Developing healthcare materials with dual-functionality controlling iROS and diagnosing IL-6 would be extremely beneficial for chronic inflammatory disease management. Herein, molybdenum trioxide hybridized kaempferol nanoparticles (MoHK NPs) have been synthesized with iROS scavenging and in situ electrochemical redox property for immunoassay of IL-6. Physicochemical integrity of nanosystem comprising MoHK NPs is characterized by X-ray absorption/photoelectron, Raman, and fourier transform infrared (FT-IR) spectroscopy as well as scanning transmission electron microscopy–high-angle annular dark field microscopic analysis. In vitro radical scavenging mechanism of MoHK NPs was studied by electron paramagnetic spectroscopy. Distinctly, these MoHK NPs exhibit a clinically significant antioxidant function and cytocompatibility with RAW 264.7 macrophage cell line. Bioaffinity layer–assisted monoclonal antibodies of IL-6 immobilized on MoHK electrode enable superior selectivity, electrochemical signal transduction (sensitivity 0.63 μA/fM/cm²), and rapid analytical response time even at ultralow IL-6 concentrations (detection limit 0.91 fM). This work demonstrates that hybridizing redox-active and antioxidant-rich phytochemical on metal oxide nanosystem can be a promising strategy for multifunctional theranostics.     

Electrochemical kinetics and cycling performance of nano Li[Li0.23Co0.3Mn0.47]O2 cathode material for lithium ion batteries

Li[Li_0.23Co_0.3Mn_0.47]O₂ cathode material was prepared by a sol–gel method. The material had a primary particle size of about 100 nm, covered by a 30 Å of Li₂CO₃ layer. The material showed promising electrochemical performance when cycled up to 3C rate. The electrochemical kinetics of the first charge was much slower than that of the second charge, due to the complex electrochemical process which involved not only Li⁺ diffusion but also release of oxygen. By taking account of this, the material was pre-charged very slowly (C/50) in the first cycle. This led to excellent electrochemical performance in the following cycles. For instance, the 1C-rate capacity increased to 168 mA h g⁻¹ after 50 cycles, comparing with the 145 mA h g⁻¹ obtained without pre-charging.     

A reinforced nanofibrous patch with biomimetic mechanical properties and chondroinductive effect for rotator cuff tissue engineering

Patch augmented surgery has been a feasible technique for rotator cuff repair. An ideal rotator cuff tissue engineering patch should have proper mechanical properties to match the native tendons and sufficient biological effect to promote tendon-bone healing. In this study, kartogenin (KGN)-grafted poly (ether-ester-urethane)urea/gelatin composite nanofibrous patches (PEEUU-GEL-KGN) were fabricated via electrospinning process followed by crosslinking of GEL and covalent grafting of KGN. The optimized PEEUU-GEL-KGN nanofibrous patches exhibited biomimetic mechanical properties, including sufficient tensile strength, non-linear stress-strain profiles, and remarkable elasticity and cyclical properties. In vitro investigations revealed that the patches possessed outstanding biocompatibility and performed a sustained release of KGN for a long time. Modification with GEL and KGN significantly improved hydrophilicity of the patches, promoted the adhesion, spreading, and proliferation of mesenchymal stem cells and upregulated the expression of cartilage-related genes. In vivo studies demonstrated that the implanted PEEUU-GEL-KGN patches effectively improved the tissue cellularity and collagen alignment, accelerated the fibrocartilage regeneration, augmented the biomechanical strength of the repaired enthesis, and reinforced the fixing of the tendon to the bone. Overall, the PEEUU-GEL-KGN patches enhanced tendon-bone healing and resisted rotator cuff re-tear. Therefore, the PEEUU-GEL-KGN patch is a highly promising candidate for rotator cuff tissue engineering.     

Biomimetic hybrid scaffold containing niosomal deferoxamine promotes angiogenesis in full-thickness wounds

Effective management of full-thickness wounds faces significant challenges due to poor angiogenesis and impaired healing. Biomimetic tissue-engineered scaffolds with angiogenic properties can, however, enhance the regeneration capacity of the damaged skin. Here, we developed a hybrid double-layer nanofibrous scaffold, comprised of egg white (EW) and polyvinyl alcohol (PVA), loaded with niosomal Deferoxamine (NDFO) for enhanced angiogenesis and wound healing features. The hybrid scaffold showed enhanced mechanical properties with comparable modulus and shape-recovery behavior of the human skin. Thanks to the porous morphology and uniform distribution of NDFO within the nanofibers, in vitro drug release studies indicated controlled and sustained release of DFO for up to 9 days. The constructs also promoted a significant increase in vascular sprouting area in vitro and enhanced vascular branches ex vivo. In vivo, implantation of the hybrid scaffold in full-thickness wounds in rats revealed early angiogenic response, a higher number of neo-formed vessels, a faster healing rate and complete epithelialization as early as day 10, compared to the control groups. Thus, the presented biomimetic hybrid scaffold with DFO control release features holds great promise in accelerated full-thickness wound healing and soft tissue regeneration.     

Autocatalytic polymerization of selenium/polypyrrole nanocomposites as functional theranostic agents for multi-spectral photoacoustic imaging and photothermal therapy of tumor

The synchronization of diagnosis and treatment is a new trend in cancer treatment. Photoacoustic imaging (PAI) and photothermal therapy (PTT) are recognized as one of the perfect combinations. The autocatalytic polymerization of selenium/polypyrrole (Se@PPy) nanocomposites with a wide-absorption band at near-infrared region (NIR, 800 nm) has been developed in this paper. The wide optical absorption characteristics enable Se@PPy nanocomposites to achieve multi-spectral PAI. Ex vivo experiments show desirable photoacoustic ability of the Se@PPy nanocomposites at wavelengths ranging from 700 nm to 900 nm, which is better than that of commercial indocyanine green (ICG). Se@PPy nanocomposites have high photothermal conversion efficiency up to 36.3% as well as excellent photo-thermal stability. In vitro cytotoxicity test demonstrates that the Se@PPy nanocomposites have good bio-safety. Furthermore, the feasibility of Se@PPy nanocomposites for enhancing multi-spectral PAI guided PTT was verified on 4T1 tumor-bearing nude mice. Our results indicate that Se@PPy nanocomposites could be used as an effective theranostic agent for near-infrared light-mediated PAI and PTT of tumor.     

Investigation of the LiCo1−xMgxPO4 (0 ≤ x ≤ 0.1)–graphitic carbon foam composites

LiCo_1−xMg_xPO₄–graphitic carbon foam (LCMP–GCF with 0 ≤ x ≤ 0.1) composites are prepared by Pechini-assisted sol-gel method and annealed with the 2-steps annealing process (T = 300 °C for 5 min in flowing air, then at T = 730 °C for t = 12 h in flowing nitrogen). The XRD analysis, performed on powders reveals LiCoPO₄ as major crystalline phase, Co₂P and Co₂P₂O₇ as secondary phases. The morphological investigation revealed the formation and growth of microcrystalline “islands” which consist of acicular crystallites with different dimensions (typically 5–50 μm). By addition of Mg-ions, CV-curves of LCMP–GCF composites show a decrease of the surface between anodic and cathodic sweeps by cycling and a stark contribution of faradaic processes due to the graphitic structured foam. The electrochemical measurements, at a discharge rate of C/10 at room temperature, show the decrease of the discharge specific capacity from 100 mAh g⁻¹ for x = 0.0 to ∼35 mAh g⁻¹ for 0.025 ≤ x ≤ 0.05, then an increase to 69 mAh g⁻¹ for x = 0.1. The electrochemical impedance spectroscopy data reveal a decrease of the electrical resistance and the improvement of the Li-ion conductivity at high Mg-ions content into the LiCoPO₄ phase (x ≥ 0.025).     

Photocatalytically Renewable Micro‐electrochemical Sensor for Real‐Time Monitoring of Cells

Electrode fouling and passivation is a substantial and inevitable limitation in electrochemical biosensing, and it is a great challenge to efficiently remove the contaminant without changing the surface structure and electrochemical performance. Herein, we propose a versatile and efficient strategy based on photocatalytic cleaning to construct renewable electrochemical sensors for cell analysis. This kind of sensor was fabricated by controllable assembly of reduced graphene oxide (RGO) and TiO₂ to form a sandwiching RGO@TiO₂ structure, followed by deposition of Au nanoparticles (NPs) onto the RGO shell. The Au NPs‐RGO composite shell provides high electrochemical performance. Meanwhile, the encapsulated TiO₂ ensures an excellent photocatalytic cleaning property. Application of this renewable microsensor for detection of nitric oxide (NO) release from cells demonstrates the great potential of this strategy in electrode regeneration and biosensing.     

Enzyme microsensor for glucose with an electrochemically synthesized enzyme-polyaniline film

An enzyme microsensor for glucose was fabricated by the electrochemical polymerization method. A glucose oxidase-entrapped polyaniline (GOD-polyaniline) film was deposited on the top of a platinum fibre (50 μm in diameter) by the electrochemical oxidative polymerization of aniline in a pH 7 buffer solution in the presence of glucose oxidase. The GOD-polyaniline films retained GOD activity and oxygen permeability but prevented large molecules from permeating. Glucose was auperometrically determined with the electrochemically fabricated microsensor in the concentration range 10⁻⁴ to 5 × 10⁻³ M.     

The Effect of the Closely‐Spaced Working and Auxiliary Electrodes on the Performance of Electrochemical Oxygen Sensor

In this paper the influence of the electrochemical reaction at the auxiliary electrode of oxygen microsensors on the sensor performance was investigated. When the auxiliary electrode is closely spaced to the working electrode, the redox cycling of O₂/H₂O takes place in an electrochemical oxygen sensor. This cycling alters the oxygen distribution around the working electrode and therefore affects the measured cathodic current passing through the working electrode. Calibrations have to be taken out to determine the real O₂/H₂O cycling effects. Furthermore, this redox cycling also provides the possibility to enhance the sensitivity of the electrochemical oxygen microsensor. Experimental results indicate that the sensitivity of the oxygen sensor is enhanced 3.0 times with the on‐chip 10 μm spaced interdigitated auxiliary electrode.     

The Cu-MOF-199/single-walled carbon nanotubes modified electrode for simultaneous determination of hydroquinone and catechol with extended linear ranges and lower detection limits

A novel electrochemical sensor based on Cu-MOF-199 [Cu-MOF-199 = Cu₃(BTC)₂ (BTC = 1,3,5-benzenetricarboxylicacid)] and SWCNTs (single-walled carbon nanotubes) was fabricated for the simultaneous determination of hydroquinone (HQ) and catechol (CT). The modification procedure was carried out through casting SWCNTs on the bare glassy carbon electrode (GCE) and followed by the electrodeposition of Cu-MOF-199 on the SWCNTs modified electrode. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) were performed to characterize the electrochemical performance and surface characteristics of the as-prepared sensor. The composite electrode exhibited an excellent electrocatalytic activity with increased electrochemical signals towards the oxidation of HQ and CT, owing to the synergistic effect of SWCNTs and Cu-MOF-199. Under the optimized condition, the linear response range were from 0.1 to 1453 μmol L⁻¹ (R_HQ = 0.9999) for HQ and 0.1–1150 μmol L⁻¹ (R_CT = 0.9990) for CT. The detection limits for HQ and CT were as low as 0.08 and 0.1 μmol L⁻¹, respectively. Moreover, the modified electrode presented the good reproducibility and the excellent anti-interference performance. The analytical performance of the developed sensor for the simultaneous detection of HQ and CT had been evaluated in practical samples with satisfying results.     

A single-atom Cu–N2 catalyst eliminates oxygen interference for electrochemical sensing of hydrogen peroxide in a living animal brain

Hydrogen peroxide (H₂O₂) plays essential roles in various physiological and pathological processes. The electrochemical hydrogen peroxide reduction reaction (HPRR) has been recognized as an efficient approach to H₂O₂ sensing; however, the HPRR has always suffered from low tolerance against the oxygen reduction reaction (ORR), resulting in poor selectivity of the HPRR-based sensing platform. In this study, we find that the electrochemical HPRR occurs preferentially compared to the ORR when isolated Cu atoms anchored on carbon nitride (Cu₁/C₃N₄) are used as a single-atom electrocatalyst, which is theoretically attributed to the lower energy barrier of the HPRR than that of the ORR on a Cu₁/C₃N₄ single-atom catalyst (SAC). With the Cu₁/C₃N₄ SAC as the electrocatalyst, we fabricated microsensors that have a good response to H₂O₂, but not to O₂ or other electroactive neurochemicals. When implanted into a living rat brain, the microsensor shows excellent in vivo sensing performance, enabling its application in real-time quantitative investigation of the dynamics of H₂O₂ production induced by mercaptosuccinate and glutathione monoethyl ester in a living animal brain.

We have achieved the selective monitoring of H₂O₂ fluctuation in vivo free from O₂ interference by a single-atom Cu–N₂ electrocatalyst.     

Novel Electrochemical Microsensor for Hydrogen Peroxide based on Iron‐Ruthenium Hexacyanoferrate Modified Carbon Fiber Electrode

Novel electrochemical microsensor based on mixed iron‐ruthenium hexacyanoferrate (FeRuHCF) modified carbon fiber microelectrode (CFME) is presented for voltammetric and amperometric measurement of hydrogen peroxide at physiological pH. The FeRuHCF coating was electrochemically deposited using a one step procedure onto the substrate carbon fiber microelectrode by cycling the potential between 0.0 and +1.0 V (vs. Ag/AgCl) in a solution containing all precursor salts. The microsensor displayed good stability in neutral and alkaline media and had a nonstop working lifetime of up to 12 hours. The amperometric response time varied from 5 to 15 s depending on the hydrogen peroxide concentration level. The newly developed electrochemical microsensor exhibited a highly linear behavior in the examined concentration range from 5 to 1000 μmol L^?1 (R²=0.999), an LoD (3σ) of 0.9 μmol L^?1, and a favorable reproducibility with a calculated RSD of 2.9% (n= 6) for 100 μmol L^?1 hydrogen peroxide, thus holding great promise for its further application in real samples and its exploitation in combination with biorecognition elements in advanced microbiosensor design.