Novel Designing of Chemically Modified Electrode (CME) of the Bio-MOF-1 for the Detection of Dopamine Based on Inhibition of [Ru(bpy)3]2+/DBAE System

Metal organic frameworks (MOFs) have attracted extensive attention in electrochemical research fields due to their high surface area and controlled porosity. Current study is design to investigate the ECL performance of the chemically modified electrode (CME) based on the bio-MOF-1, a porous zinc-adenine framework, which loaded ruthenium complex and employed for the detection of dopamine (DA). The composite material [Ru(bpy)₃]²⁺@bio-MOF-1 (Ru-bMOF) modified carbon glassy electrode (Ru-bMOF/GCE) exhibited an excellent ECL performance having a linear co-efficient response (R²=0.9968) for 2-(dibutyl amino) ethanol (DBAE), a classical ECL co-reactant was obtained over a concentration range of 1.0×10⁻⁹ M to 1.0×10⁻⁴ M in 0.10 M pH=6.0 phosphate buffer solution (PBS). Furthermore, DA was detected based on its inhibition effect on [Ru(bpy)₃]²⁺/DBAE system. Compared to traditional analytical methods, this method has various advantages such as simple electrode preparation, quick response, high reproducibility (RSD<2.0 %), low limit of detection (LOD=1.0×10⁻¹⁰ mol/L). This chemical investigated modified electrode had exploited potential for detection of DA.     

Hot Electron Induced Cathodic Electrochemiluminescence at Disposable Screen Printed Carbon Electrodes

Hot electron induced cathodic electrochemiluminescence (ECL) was observed at screen printed carbon electrodes (SPCEs) during pulse polarization. The thin insulating film resulted from the printing inks was found to be suitable for generating hot electrons, which can further be converted to hydrated electrons and induce the subsequent luminescence. Compared with disposable Al/Al₂O₃ electrode, SPCEs show more stable and reproducible ECL in a wider pH range without background emission. A sensitive ECL method for determination of quercetin is proposed. The detection limit is 8.0×10^?10 mol L^?1(S/N=3), which is two magnitudes lower than that of common ECL method.     

Recent advances in electrochemiluminescence immunoassay based on multiple-signal strategy

Electrochemiluminescence (ECL) has been widely applied in immunoassays because of low background, high sensitivity, and excellent spatiotemporal controllability. In order to meet the increasing demand for high efficiency and accuracy of immunoassays in complex conditions, considerable efforts have been devoted to ECL strategies with multiple-signal outputs. In this short review, we summarize the recent advances of ECL strategies based on multiple-signal outputs, which includes ratiometric ECL, ECL multiplex immunoassay (MIA), and ECL imaging. Their signal generation strategies and analysis applications for immunoassay are discussed in detail. Moreover, the challenges and prospects in this field from us are addressed.     

Determination of Hg2+ in Tap Water Based on the Electrochemiluminescence of Ru(phen)32+ and Thymine at Bare and Graphene Oxide‐Modified Glassy Carbon Electrodes

The electrochemiluminescence (ECL) of the Ru(phen)₃²⁺/thymine (T) system at bare and graphene oxide (GO)‐modified glassy carbon (GC) electrodes was utilized to determine Hg²⁺ in tap water. The ECL intensity of Ru(phen)₃²⁺ was considerably enhanced by the addition of thymine because of the occurrence of ECL reaction between them. Subsequently, the ECL intensity of Ru(phen)₃²⁺/T system rapidly decreased with the addition of Hg²⁺ because of the formation of a T‐Hg²⁺‐T complex. A linear response (R²=0.9914) was obtained over a Hg²⁺ concentration range of 1.0×10^?9 mol/L to 1.0×10^?5 mol/L with a detection limit of 3.4×10^?10 mol/L at a bare GC electrode in 0.1 mol/L phosphate buffer (pH=8.0). The detection limit can be further reduced to 4.2×10^?12 mol/L after modification of the GC electrode by GO. To verify its applicability, the proposed method was utilized to determine Hg²⁺ in tap water and simulated wastewater. The method exhibited good reproducibility and stability and thus reveals the possibility of developing a novel ECL detection method for Hg²⁺.     

Determination of Cu2+ in Drinking Water Based on Electrochemiluminescence of Ru(phen)32+ and Cyclam

A convenient and simple electrochemiluminescence (ECL) method was employed to detect trace amounts of Cu²⁺ in drinking water. This method is based on the inhibitory effect of Cu²⁺ on the ECL of Ru(phen)₃²⁺ and 1,4,8,11‐tetraazacyclotetradecane (cyclam) system. ECL intensity of Ru(phen)₃²⁺ was considerably enhanced by the addition of cyclam because of the ECL reaction between them. The ECL intensity of Ru(phen)₃²⁺/cyclam system rapidy decreased with the addition Cu²⁺ because of the formation of chelate complex [Cu(cyclam)]²⁺. Good linear response (R ²=0.9948) was obtained at Cu²⁺ concentration of 1.0×10⁻⁹−1.0×10⁻⁵ mol ⋅ L⁻¹ at glassy carbon electrode in 0.1 mol ⋅ L⁻¹ phosphate buffer (pH 9.0). Observed detection limit of 4.8×10⁻¹⁰ mol ⋅ L⁻¹ satisfied the maximum contaminant level goal (MCLG) for Cu²⁺ set by the US Environmental Protection Agency (US EPA). Applicability of the proposed method was verified by the good reproducibility and stability of the method when applied to determine Cu²⁺ in tap water and simulated wastewater. Thus, a novel ECL detection method was developed for Cu²⁺ detection.     

A Novel Electrogenerated Chemiluminescence (ECL) Sensor Based on Ru(bpy)32+‐Doped Titania Nanoparticles Dispersed in Nafion on Glassy Carbon Electrode

A novel electrogenerated chemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺‐doped titania (RuDT) nanoparticles dispersed in a perfluorosulfonated ionomer (Nafion) on a glassy carbon electrode (GCE) was developed in this paper. The electroactive component‐Ru(bpy)₃²⁺ was entrapped within the titania nanoparticles by the inverse microemulsion polymerization process that produced spherical sensors in the size region of 38±3 nm. The RuDT nanoparticles were characterized by electrochemical, transmission electron and scanning microscopy technology. The Ru(bpy)₃²⁺ encapsulation interior of the titania nanoparticles maintains its ECL efficiency and also reduces Ru(bpy)₃²⁺ leaching from the titania matrix when immersed in water due to the electrostatic interaction. This is the first attempt to prepare the RuDT nanoparticles and extend the application of electroactive component‐doped nanoparticles into the field of ECL. Since a large amount of Ru(bpy)₃²⁺ was immobilized three‐dimensionally on the electrode, the Ru(bpy)₃²⁺ ECL signal could be enhanced greatly, which finally resulted in the increased sensitivity. The ECL analytical performance of this ECL sensor for tripropylamine (TPA) was investigated in detail. This sensor shows a detection limit of 1 nmol/L for TPA. Furthermore, the present ECL sensor displays outstanding long‐term stability.     

Effects of Heteropoly Acids and Surfactant on Electrochemiluminescence of Tris(2,2'-Bipyridine) Ruthenium(II)

ABSTRACT

The effects of heteropoly acids and Triton X-100 on electrochemiluminescence (ECL) of Ru(bpy)₃ ²⁺ are investigated. Triton X-100 prevents the oxidation of oxalate and results in an increase of the ECL signal. H₅SiW₁₁VO₄₀ prevents the direct oxidation of oxalate and makes the electrochemical behavior of Ru(bpy)₃ ²⁺ less reversible, which leads to a decrease of the ECL signal. In contrast, H₃PMo₁₂O₄₀ has negligible effect on ECL intensity. Some possible reasons for the effects on the ECL of Ru(bpy)₃ ²⁺ are discussed based on the adsorption of SiW₁₁VO₄₀ ^5? on electrode surface and the ion association between SiW₁₁VO₄₀ ^5? and Ru(bpy)₃ ²⁺. The signal of ECL decreases linearly with the concentration of heteropoly acid in the range from 2x10^?6 to 1x10^?4 mol 1^?1. The results indicate that ECL of Ru(bpy)₃ ²⁺ is a potential sensitive and selective detection method for heteropoly acids and hence for the elements comprised in them.     

Electrogenerated Chemiluminescence Sensor Based on Tris(2,2′‐bipyridine)ruthenium(II)‐Immobilized Natural Clay and Ionic Liquid

A novel electrogenerated chemiluminescence (ECL) sensor based on natural clay and ionic liquid was fabricated. Tris(2,2′‐bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) was immobilized on natural clay surface through simple adsorption. An ECL sensor was prepared by mixing Ru(bpy)₃²⁺‐incorporated clay, graphite powder and an ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) as the binder. The electrochemical behavior and ECL of the immobilized Ru(bpy)₃²⁺ was investigated. It was observed that the ECL of immobilized Ru(bpy)₃²⁺ was activated by the ionic liquid. The proposed ECL sensor showed high sensitivity to tri‐n‐propylamine (TPrA) and the detection limit was found to be 20 pM. In addition, the ECL sensor displayed good stability for TPrA detection and long‐term storage stability.     

Hot electron induced cathodic electrochemiluminescence at AuSb alloy electrode for fabricating immunosensor with self-assembled monolayers

Thin antimony oxide covered AuSb alloy electrode was firstly found to be an excellent cold cathode for generating hot electrons during cathodic pulse polarization. Owing to the injection of hot electrons and the subsequent generation of hydrated electrons, fluorescein iso-thiocyanate (FITC) that cannot be excited in common ECL was cathodically excited at the alloy electrode. Self-assembled thiol monolayers were formed on the electrode surface due to the presence of Au in the alloy, to which strepavidin was covalently bound, and then biotinylated antibody was immobilized through the strepavidin-biotin interaction. As a simple model, an immunosensor for the detection of human IgG (hIgG) using FITC as labeling agent was fabricated. ECL signals were responsive to the amount of hIgG bounded to the immunosensor. The ECL intensity was linearly changed with the logarithm of hIgG concentration in the range of 1.0-1000 ng mL⁻¹, and the detection limit was ca. 0.3 ng mL⁻¹ (S/N = 3). The proposed immunosensor showed a broad linear range (three magnitudes), good reproducibility and stability, which is promising in detecting FITC-based labels in various types of bioaffinity assays.     

Determination of adrenaline by using inhibited Ru(bpy)3 electrochemiluminescence

Adrenaline was found to inhibit strongly the electrochemiluminescence (ECL) from the Ru(bpy)₃²⁺/tripropylamine system when a working Pt electrode was maintained at 1.05 V (versus Ag/AgCl) in pH 8.0 phosphate buffer. On this basis, a flow injection (FI) procedure with inhibited electrochemiluminescence detection has been developed for determination of adrenaline. The method exhibited a good reproducibility, sensitivity, and stability with a detection limit (signal-to-noise ratio = 3) of 7.0×10⁻⁹ mol l⁻¹ and dynamic concentration range of 2×10⁻⁸ to 1×10⁻⁴ mol l⁻¹. The relative standard deviation was 2.2% for 1.0×10⁻⁶ mol l⁻¹ adrenaline (n=11). The method was successfully applied to the determination of adrenaline in pharmaceutical samples. Moreover, ECL emission spectra, UV-Vis absorption spectra and cyclic voltammograms of Ru(bpy)₃²⁺/tripropylamine/adrenaline were studied. The inhibition mechanism has been proposed as the interaction of electrogenerated Ru(bpy)₃^2+* and the o-benzoquinone derivatives, adrenochrome and adrenalinequinone, at the electrode surface.     

Electrochemiluminescence of tri(2,2′-bipyridine)ruthenium in aqueous solution on a gold-nanoparticle-modified glassy carbon electrode

The electrochemical behavior of electrochemical deposition of Au nanoparticles onto a glassy carbon electrode (GCE) and its application for the electrocatalytic electrogenerated chemiluminescence (ECL) of Ru(bpy)₃²⁺ in an aqueous solution without coreaction are investigated in this report. The modification of GCE by Au nanoparticles results in excellent catalysis of the ECL of Ru(bpy)₃²⁺. The effects of various factors, such as potential scan range, the presence of nitrogen and oxygen, and the scan rate on Ru(bpy)₃²⁺. ECL peaks, were systematically studied. This article has provided insight into the design of an Au-nanoparticle-modified electrode for ECL, analytical and catalytic applications. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 9, pp. 1127–1132. The text was submitted by the authors in English.     

A Solid‐State Electrochemiluminescence Immunosensor Based on MWCNTs‐Nafion and Ru(bpy)32+/Nano‐Pt Nanocomposites for Detection of α‐Fetoprotein

A approach was successfully employed for constructing a solid‐state electrochemiluminescence (ECL) immunosensor by layer‐by‐layer self‐assembly of multiwall carbon nanotubes (MWCNTs)‐Nafion composite film, Ru(bpy)₃²⁺/nano‐Pt aggregates (Ru‐PtNPs) and Pt nanoparticles (PtNPs). The influence of Pt nanoparticles on the ECL intensity was quantitatively evaluated by calculating the electroactive surface area of different electrodes with or without PtNPs to immobilize Ru(bpy)₃²⁺. The principle of ECL detection for target α‐fetoprotein antigen (AFP) was based on the increment of resistance after immunoreaction, which led to a decrease in ECL intensity. The linear response range was 0.01–10 ng mL^?1 with the detection limit of 3.3 pg mL^?1. The immunosensor exhibited advantages of simple preparation and operation, high sensitivity and good selectivity.     

基于Ru(bpy)■-三乙胺体系的电致化学发光生物传感器检测葡萄糖

联吡啶钌(Ru(bpy)■)拥有优良的电致化学发光(ECL)性能,但其较好的水溶性使其固载面临巨大问题。该文制备了Pt纳米粒子与Ru(bpy)■的复合物(Pt NPs-Ru),将其修饰于电极并进一步固载葡萄糖氧化酶(GOx)制得传感器。基于H2O2对Ru(bpy)■-三乙胺体系ECL信号的猝灭作用,随着葡萄糖浓度的增加,其在GOx的催化下原位产生的H2O2量增多,导致ECL信号逐渐减弱,从而实现葡萄糖的检测。ECL强度与葡萄糖浓度的对数在1.0×10-8~5.0×10-5 mol/L范围内呈良好的线性关系,检出限低至5.2×10-9 mol/L。传感器具有好的稳定性和高的选择性。Pt NPs-Ru复合物为ECL传感器的构建提供了良好平台,为葡萄糖检测提供了新方法。     

Determination of β-blockers in pharmaceutical preparations and human urine by high-performance liquid chromatography with tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence detection

A highly selective and sensitive detection method based on tris(2,2′-bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺] electrogenerated chemiluminescence (ECL) has been developed for the quantitative determination of β-blockers in both pharmaceutical preparations and human urine samples. The ECL emission is based on the reaction between electro-oxidized Ru(bpy)₃³⁺ and the secondary amino groups on the β-blockers. The ECL intensities for the β-blockers were strongly dependent on the pH at which the ECL detections were conducted, with the maximum intensities being obtained at pH 9.0. Under the optimal condition, the detection limit for atenolol and metoprolol were almost 0.5 μM (50 pmol) and 0.08 μM (8 pmol), respectively, with S/N of 3 and a linear working range that extends four orders of magnitude with relative standard deviations below 5% for 10 replicate injected samples. The concentrations of atenolol and metoprolol were determined in pharmaceutical preparations using flow injection analysis with Ru(bpy)₃²⁺ ECL detection based on standard addition method. The determined values by the present method showed acceptable agreement with the stated values by manufacturers. The determination of the five β-blockers in human urine samples was performed using HPLC-Ru(bpy)₃²⁺ ECL detection. The resulting chromatogram was much simpler than that obtained with HPLC-UV absorbance detection.     

Highly Sensitive Electrochemiluminescence Detection of Mercury(II) Ions Based on DNA‐Linked Luminol‐Au NPs Superstructure

A novel highly sensitive electrochemiluminescence (ECL) detection protocol for mercury(II) ions was developed. Based on the strong and stable thymine? thymine mismatches complexes coordination chemistry, mercury(II) ions can specifically bind to a designed DNA strand, leading to the release of the complimentary DNA strand. The released DNA strand was then captured by magnetic beads modified with specific DNA, and then through the formation of DNA‐linked luminol‐Au nanoparticles (NPs) superstructure, a specific ECL system for mercury(II) ions was developed. Using 3‐aminopropyl‐triethoxysilane as an effective enhancer, the ECL system can detect Hg²⁺ ion within a linear range from 2.0×10^?10 mol L^?1 to 2.0×10^?8 M, with a detection limit as low as 1.05×10^?10 M (3σ). Moreover, this ECL system is highly specific for Hg²⁺, without interference from other commonly coexisted metal ions, and it can be used for the analysis of real samples.     

Electrochemiluminescence Sensor for Selective Preconcentration and Sensitive Detection of Napropamide Using Water‐Soluble Sulfonated Graphene

A novel electrochemiluminescence (ECL) sensor for napropamide determination was prepared using the water‐soluble sulfonated graphene (sulfonated‐G) as solid‐phase microextraction (SPME) material, based on selective preconcentration of target onto an electrode and followed by luminol ECL detection. The effects of pH, adsorption time, buffer solution and the luminescence agent on ECL intensity were optimized. Under the optimized conditions (pH 6; adsorption time 5 min; buffer solution pH 11.0 Na₂CO₃ aHCO₃; luminescence agent luminol; stirring speed 400 rpm), the lowest detection limits (1.0 µg L⁻¹) and good linear range (r²≥0.99) were obtained for the analyte, indicating the superior performance of Nafion/sulfonated‐G/GCE for detecting napropamide.     

Quenching Behavior of the Electrochemiluminescence of Ru(bpy)32+/TPrA System by Phenols on a Smartphone-Based Sensor

Phenolic compounds such as vanillic and p-coumaric acids are pollutants of major concern in the agro-industrial processing, thereby their effective detection in the industrial environment is essential to reduce exposure. Herein, we present the quenching effect of these compounds on the electrochemiluminescence (ECL) of the Ru(bpy)₃²⁺/TPrA (TPrA=tri-n-propylamine) system at a disposable screen-printed carbon electrode. Transient ECL profiles are obtained from multiple video frames following 1.2 V application by a smartphone-based ECL sensor. A wide range of detection was achieved using the sensor with limit of detection of 0.26 μM and 0.68 μM for vanillic and p-coumaric acids, respectively. The estimated quenching constants determined that the quenching efficiency of vanillic acid is at least two-fold that of p-coumaric acid under the current detection conditions. The present ECL quenching approach provided an effective method to detect phenolic compounds using a low-cost, portable smartphone-based ECL sensor.     

Polymer Electrochemiluminescence Featuring Thermally Activated Delayed Fluorescence

Electrochemiluminescence (ECL) based on conjugated polymers or oligomers is persistently being pursued owing to its huge application scope ranging from ultra-sensitive bioanalysis to ultra-resolution imaging and spectroscopy. Because of the theoretical limit in radiative exciton generation yield (typically ∼25 %) of those polymers or oligomers, the corresponding ECL efficiency is still limited, which hampers its ECL performance and its related applications. Herein, we report ECL based on a thermally activated delayed fluorescence (TADF) polymer scaffold, which is characteristic of all-exciton harvesting in the ECL process, and thus potentially capable of achieving ∼100 % ECL efficiency. These desired properties of the TADF polymer ECL is attributed to a fast and efficient up-conversion process from non-radiative triplet to radiative singlet states under thermal activation, which is absent in conventional fluorescent polymers/oligomers, such as F8BT. In this study, various ECL modes, including annihilation or co-reactant mode using TPrA or S₂O₈²⁻ as co-reactant, are confirmed for our model TADF polymer ECL system, which was different from fluorescent polymer ECL counterpart. Furthermore, solid-state ECL sensing on L-cysteine (an important marker of disease) is also evaluated by using the model TADF polymer. Ultralow detection limit in combination with high sensitivity and good specificity are achieved for this model system, indicative of a high potential of the TADF polymer scaffold for applications in the broad field of ECL.     

A electrochemiluminescence aptasensor for detection of thrombin incorporating the capture aptamer labeled with gold nanoparticles immobilized onto the thio-silanized ITO electrode

A novel electrochemiluminescence (ECL) aptasensor was proposed for sensitive and cost-effective detection of the target thrombin adopted an aptamer-based sandwich format. To detect thrombin, capture aptamers labeled with gold nanoparticles (AuNPs) were first immobilized onto the thio-silanized ITO electrode surface through strong Au-S bonds. After catching the target thrombin, signal aptamers tagged with ECL labels were attached to the assembled electrode surface. As a result, an AuNPs-capture-aptamer/thrombin/ECL-tagged-signal-aptamer sandwich type was formed. Treating the resulting electrode surface with tri-n-propylamine (TPA) and applying a swept potential to the electrode, ECL response was generated which realized the detection of target protein. Spectroscopy and electrochemical impedance techniques were used to characterize and confirm the fabrication of the ECL aptasensor. AuNPs amplification and smart sensor fabrication art were implemented for the sensitive and cost-effective detection purpose. Signal-to-dose curve excellently followed a sandwich format equation and could be used to quantify the protein, and the detection limit was estimated to be 10 nM. Other forms of thrombin such as β- and γ-thrombins had negligible response, which indicated a high specificity of α-thrombin detection. The aptasensor opened up new fields of aptamer applications in ECL domain, a highly sensitive technique, and had a promising perspective to be applied in microarray analysis.