Reactions of (E)-1,2-di(3-guaiazulenyl)ethylene and 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene with tetracyanoethylene (TCNE) in benzene: comparative studies on the products and their spectroscopic properties

Reactions of the title ethylene derivatives, (E)-1,2-di(3-guaiazulenyl)ethylene (1) and 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (2), with a 2 M amount of TCNE in benzene at 25 °C for 24 h under argon give new cycloaddition compounds, 1,1,2,2,11,11,12,12-octacyano-3-(3-guaiazulenyl)-8-isopropyl-5,10-dimethyl-1,2,3,6,9,10a-hexahydro-6,9-ethanobenz[a]azulene (3) from 1 and 1,1,2,2,11,11,12,12-octacyano-8-isopropyl-3,3-bis(4-methoxyphenyl)-5,10-dimethyl-1,2,3,6,9,10a-hexahydro-6,9-ethanobenz[a]-azulene (4) from 2, respectively, in 66 and 87% isolated yields. Comparative studies on the above reactions as well as the spectroscopic properties of the unique products 3 and 4, possessing interesting molecular structures, are reported and, further, a plausible reaction pathway for the formation of these products is described.     

Synthesis and characterization of new air stable primary amido substituted diborane(4) derivatives

Three new diborane(4) derivatives, 1,2-bis(2,4,6-trimethylanilide)-1,2-bis(dimethyamido)diborane(4) (1), 1,2-bis(2,4,6-trimethylanilide)-1,2-bis(duryl)diborane(4) (2) and 1,2-bis(anilide)-1,2-bis(duryl)diborane(4) (3), have been synthesized and characterized by means of elemental analysis, IR, ¹H, ¹³C and ¹¹B NMR spectroscopy. Additionally, the structures of compounds 1 and 2 have been determined by the single crystal X-ray diffraction technique. The compounds 1 and 2 crystallize in the monoclinic P21/c space group. All of the compounds were found to be air stable.     

Reactions of 4-Aryl-1,2,4-triazolidine-3,5-dithione with Some Electrophilic Reagents

Reaction of 4-aryl-1,2,4-triazolidine-3,5-dithiones in an alkaline medium with chloroacetic acid and its derivatives, as well as with -bromo ketones, results in their conversion to 4-aryl-1,2,4-triazole-3,5-bis(sulfides). The aminomethylation in a neutral medium leads to the formation of 1-(aminomethyl)-4-aryl-1,2,4-triazolidine-3,5-dithiones.     

The synthesis of metallocene calix[4]arenes

The condensation of 1,1-bis(chlorocarbonyl)metallocenes andp-tert-butylcalix[4]arene in toluene leads to novel metallocene calix[4]arenes in which the metallocene subunit bridges the opposite hydroxy groups of the parent calixarene.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

Preparation of 1,1-disubstituted silacyclopentadienes

Several new 1,1-disubstituted siloles containing substituents on the ring carbon atoms have been synthesized. The new siloles: 1,1-dihydrido-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (5), 1,1-dihydrido-2,5-dimethyl-3,4-diphenylsilole (6), 1,1-dimethoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (7), 1,1-bis(4-methoxyphenyl)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (8), 1,1-dipropoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (9), and 1,1-dibromo-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (13) were prepared from reactions originating from the previously reported, 1,1-bis(diethylamino)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (1) or 1,1-bis(diethylamino)-2,5-dimethyl-3,4-diphenylsilole (2). In addition, three other new organosilane byproducts were observed and isolated during the current study, bis(4-methoxyphenyl)bis(phenylethynyl)silane (11), bis(4-methoxyphenyl)di(propoxy)silane (12) and 1-bromo-4-bromodi(methoxy)silyl-1,4-bis(trimethylsilyl)-3,4-diphenyl-1,3-butadiene (14). Compounds 13 and 14 were characterized by X-ray crystallography and 14 is the first 1,1-dibromosilole whose solid state structure has been determined.     

Synthesis and crosslinking of poly (aryl ether)s containing 1,1-diphenylethylene moieties

Poly (aryl ether)s containing the diphenylethylene moiety, synthesized from 1,1-bis(4-fluo-rophenyl)ethylene or 1,1-bis(4-hydroxyphenyl)ethylene, are thermally crosslinkable. Char-acterization and crosslinking studies of these polymers were carried out by GPC, DSC, TGA, and NMR. The solvent resistance and T_g's of the resulting crosslinked networks increase after crosslinking. Thermogravimetric analysis shows that no significant mass loss accompanies the crosslinking reaction. © 1995 John Wiley & Sons, Inc.     

Remarkable effect of metal fluoride catalyst on reaction of hexafluoropropene, sulfur and vinyl ethers. Convenient synthesis of 2,2-bis(trifluoromethyl)-4-R-thietanes, 3,3-bis(trifluoromethyl)-5-R-1,2-dithiolanes and 2,2-bis(trifluoromethyl)-4-R-1,3-dithiolanes

It was demonstrated that the outcome of the reaction of hexafluoropropene, sulfur and vinyl ether strongly depends on the catalyst and reaction conditions. The reaction of HFP and S_x leading to the formation of 2,2,4,4-tetrakis(trifluoromethyl)-1,3-dithietane (1) when it is catalyzed by CsF, proceeds under milder conditions and is easier to control compared to KF catalyzed process. The order of addition of reagents plays a crucial role on the outcome of the reaction. For example, the addition of vinyl ether to pregenerated solution of 1 in DMF solvent results in slow reaction, leading to the corresponding 2,2-bis(trifluoromethyl)-4-R-thietanes in 8-91% yield, and it is catalyzed by either by KF or CsF. The addition of second mole of sulfur to the solution of 2,2-bis(trifluoromethyl)-4-R-thietanes in the presence MF catalyst leads to insertion of sulfur into thietane ring with the formation of the corresponding cyclic disulfides—3,3-bis(trifluoromethyl)-5-R-1,2-dithietanes. On the other hand, the addition of second mole of sulfur to the solution of 1 in DMF in the presence of CsF catalyst, followed by addition of vinyl ether results in exothermic reaction, and it produces the corresponding 2,2-bis(trifluoromethyl)-4-alkoxy-1,3-dithiolanes in good yield.It was also demonstrated that 2,2-bis(trifluoromethyl)-4-R-thietanes can undergo disproportionation under action of fluoride anion, producing a mixture of the corresponding 1,2-dithiolane and CF₂C(CF₃)CH₂CFHOR. The nucleophilic attack of fluoride anion in this case proceeds selectively on the carbon of the thietane ring, bearing alkoxy group.The structure of 2,2-bis(trifluoromethyl)-4-R-thietanes forming as the result of 2 + 2 cycloaddition reaction between hexafluorothioacetone generated “in situ” from dimer 1 and vinyl ether was firmly supported by single crystal X-ray diffraction data, obtained for thietane bearing t-BuO-group.     

Synthesis and structure of 1-metallacyclopent-3-yne complexes of group 4 metals

Five-membered metallacyclic alkyne complexes of titanium and hafnium, 1,1-bis(cyclopentadienyl)-1-titanacyclopent-3-yne (2) and trans-1,1-bis(cyclopentadienyl)-2,5-trimethylsilyl-1-hafnacyclopent-3-yne (6), were synthesized and structurally characterized. The structural analysis of titanium complex 2 implied a larger contribution of an η⁴-π,π-coordinated structure. The hafnium compound 6 has a similar structure to the corresponding zirconium analogue (1a), although slight differences in the bond lengths and angles were observed. A novel 1-zirconacyclopent-3-yne complex, 1,1-bis(methylcyclopentadienyl)-2,5-bis(trimethylsilyl)-1-zirconacyclopent-3-yne (5), was also prepared and the structure of the trans-isomer was determined.     

Reaction of azulene with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol in a mixed solvent of methanol and acetonitrile in the presence of hydrochloric acid: a facile one-pot synthesis and properties of new triarylethylenes possessing an azulen-1-yl group

Reaction of azulene (1) with 1,2-bis[4-(dimethylamino)phenyl]-1,2-ethanediol (2) in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives 2-(azulen-1-yl)-1,1-bis[4-(dimethylamino)phenyl]ethylene (3) (8% yield), 1-(azulen-1-yl)-(E)-1,2-bis[4-(dimethylamino)phenyl]ethylene (4) (28% yield), and 1,3-bis{2,2-bis[4-(dimethylamino)phenyl]ethenyl}azulene (5) (9% yield). Besides the above products, this reaction affords 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethane (6) (15% yield), a meso form (1R,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethane (7) (6% yield), and the two enantiomeric forms (1R,2R)- and (1S,2S)-1,2-di(azulen-1-yl)-1,2-bis[4-(dimethylamino)phenyl]ethanes (8) (6% yield). Furthermore, addition reaction of 3 with 1 under the same reaction conditions as the above provides 6, in 46% yield, which upon oxidation with DDQ (=2,3-dichloro-5,6-dicyano-1,4-benzoquinone) in dichloromethane at 25 °C for 24 h yields 1,1-di(azulen-1-yl)-2,2-bis[4-(dimethylamino)phenyl]ethylene (9) in 48% yield. Interestingly, reaction of 1,1-bis[4-(dimethylamino)phenyl]-2-(3-guaiazulenyl)ethylene (11) with 1 in a mixed solvent of methanol and acetonitrile in the presence of 36% hydrochloric acid at 60 °C for 3 h gives guaiazulene (10) and 3, owing to the replacement of a guaiazulen-3-yl group by an azulen-1-yl group, in 91 and 46% yields together with 5 (19% yield) and 6 (13% yield). Similarly, reactions of 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (12) and 1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}-2-(3-guaiazulenyl)ethylene (13) with 1 under the same reaction conditions as the above provide 10, 2-(azulen-1-yl)-1,1-bis(4-methoxyphenyl)ethylene (16), and 1,3-bis[2,2-bis(4-methoxyphenyl)ethenyl]azulene (17) (93, 34, and 19% yields) from 12 and 10 and 2-(azulen-1-yl)-1,1-bis{4-[2-(dimethylamino)ethoxy]phenyl}ethylene (18) (97 and 58% yields) from 13.     

peri-Naphthylenediamines. 32. Reactions of 4,5-bis(dimethylamino)-1-naphthyllithium and 4,5-bis(dimethylamino)-1-naphthylmagnesium bromide with electrophilic agents. New representatives of double naphthalene “proton sponges” with the structures of 1,1"-binaphthyl ketone and 1,1"-binaphthylmethanol

The 4-deuterio, 4-methyl, 4-iodo, 4-methylthio, 4-trimethylsilyl, and 4-ethoxycarbonyl derivatives of 1,8-bis(dimethylamino)naphthalene (proton sponge) and some related alcohols were prepared by the reactions of 4,5-bis(dimethylamino)-1-naphthyllithium or 4,5-bis(dimethylamino)-1-naphthylmagnesium bromide with the corresponding electrophilic reagents. New representatives of double proton sponges with the structures of 1,1"-binaphthyl ketone and 1,1"-binaphthylmethanol were synthesized. The pK _a values of selected compounds in DMSO were measured by competitive protonation.     

Synthesis and characterization of thermally stable poly(ether-azomethine)s derived from 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane

A new dialdehyde 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane (BBMPC) was synthesized starting from cyclopentanone and O-cresol to give 1,1-bis(4-hydroxy-3-methyl phenyl)cyclopentane (BHMPC); followed by reaction with 4-fluorobenzaldehyde in N, N-dimethyl formamide (DMF), containing anhydrous potassium carbonate. New series of poly(ether-azomethine)s were synthesized from (BBMPC) with different diamines such as 4,4′- diamino diphenyl ether (ODA); 4,4′-diaminodiphenyl methane (MDA); 4-aminophenyl sulfone (SDA); p-phenylene diamines (p-PDA), etc. in N, N’- dimethyl acetamide (DMAc) with 5 wt% LiCl by the solution polycondensation method. Inherent viscosities of these polymers were in the range 0.20 to 0.38 dL/g indicating formation of moderate molecular weights. These polymers exhibited good solubility in various polar aprotic solvents such as N-methyl-2-pyrrolidone (NMP), DMAc, DMF, etc. However some polymers showed partial solubility in DMF and DMAc. X-Ray diffraction pattern of polymers showed amorphous nature. Thermal stability was assessed by 10% weight loss temperature and the degradation temperature of the resultant polymers falls in the ranges from 444-501°C in nitrogen. The glass transition temperature was in the range of 155-205°C. The structure-property correlation among these polyazomethines were studied; in view of their potential applications as high performance polymers.     

Synthesis, characterization and bromination of bis(phosphinoferrocenyl) gold(I) compounds

Reaction of [(dppf)Au₂Br₂] (3) {dppf = 1,1′-bis(diphenylphosphino)ferrocene} and [(dippf)Au₂Br₂] (4) {dippf = 1,1′-bis(diisopropylphosphino)ferrocene} with excess bromine yields two new complexes [(C₅H₄Br₃)(PR₂)AuBr] (R = Ph, 5; R = i-Pr, 6). Bromination of the free diphosphinoferrocene ligands produces the expected brominated cyclopentenes (C₅H₄Br₃)(PR₂) (R = Ph, 7; R = i-Pr, 8) in good yields; however, these compounds could not be complexed to gold due to reduced basicity of 7 and 8. When the bromination is performed under wet aerobic conditions the oxidized pseudo-centrosymmetric product, [doppf][FeBr₄] (9) {doppf = 1,1′-bis(oxodiphenylphosphino)ferrocene, is formed as the major product. Solid-state structures of 1, 2, 4, 6, and 9 have been established by means of single-crystal X-ray crystallography.     

The Dissociation Constants of 1,1′-Bis (pyridinium-4-aldoxime)trimethylene dibromide

Summary. The dissociation constants of the two oxime groups of 1,1-bis(pyridinium-4-aldoxime)trimethylene dibromide (TMB-4) were determined using spectrophotometric data. Two numerical methods were applied to treat the overlapping equilibria. The results obtained by both agreed with each other and their mean values at 25°C corrected for the ionic strength of 0.05moldm^–3 are pK_a1=7.49±0.11 and pK_a2=8.96±0.09. These values were discussed in terms of the pK_as of 1,1-bis(pyridinium-4-aldoxime)oxydimethylene dichloride (Toxogonin), a similar dioxime, which were derived by extrapolation of literature data.     

Synthesis and properties of aromatic polyamides containing the cyclohexane structure

1,1-Bis[4-(4-carboxyphenoxy)phenyl]cyclohexane (III) and 1,1-bis[4-(4-aminophenoxy)phenyl]cyclohexane (V) were prepared in two main steps starting from the aromatic nucleophilic substitution of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 1,1-bis(4-hydroxyphenyl)cyclohexane in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides with cyclohexylidene cardo groups were directly polycondensated from dicarboxylic acid III with various aromatic diamines or from diamine V with various aromatic dicarboxylic acids in an N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The polyamides exhibited inherent viscosities in the range of 0.45 to 1.78 dL/g. Almost all of the polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and could afford transparent, flexible, and tough films by solution casting. The glass transition temperatures (T_g) of these aromatic polyamides were in the range of 180–243°C by DSC, and the 10% weight loss temperatures in nitrogen and air were all above 450°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3575–3583, 1999     

Synthesis and near infrared electrochromic properties of metallodithiolene complexes

Four metallodithiolene complexes[4,8-bis(octyloxy)-1,3,5,7-tetrathia]?di[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)](3),[4,8-bis(octyloxy)-1,3,5,7-tetrathia]di[1,3-bis(diphenylphosphino)propane?nickel(II)](4),[4,8-bis(octyloxy)-1,3,5,7-tetra-thia]?[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)]?[1,3-bis(diphenylphosphino)propane·nickel(II)](5)and di[4,8-bis(octyloxy)-1,3,5,7-tetrathia]?[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)]?nickel(II)(6)were synthesized and the near-infrared(NIR)electrochromic properties were studied.The spectroelectrochemical spectra and the electrochromic parameters such as optical contrast,switching time,optical density change,electrochromic efficiency and optical attenuation of complexes 3–6 were investigated in detail.The symmetric binuclear complex 4 showed relatively high electrochromic efficiency of63.0 and 75.4 cm~2/C both in the two oxidation states.The complexes exhibited excellent electroactive/electrochromic stability characterized by chronoamperometry(4000 cyclic switches).     

Synthesis of 1,2-diferrocenyl-3-(diacylmethylidene)cyclopropenes and 1,1-diacyl-2,3-diferrocenyl-4-methylsulfanylbuta-1,3-dienes, their structures and electrochemical properties

2,3-Diferrocenyl-1-morpholinocyclopropenylium tetrafluoroborate reacts with 1,3-diketones in the presence of triethylamine to give 3-diacylmethylidene-1,2-diferrocenylcyclopropenes (8a-d). Under similar conditions, 2,3-diferrocenyl-1-methylsulfanylcyclopropenylium iodide affords 8a-c (∼25-30%) and 1,1-diacyl-2,3-diferrocenyl-4-methylsulfanylbuta-1,3-dienes (10a-c) (∼50-60%). The structures of the products obtained were established based on the data from ¹H (1D NOE) and ¹³C NMR spectra and X-ray diffraction analysis. Electrochemical properties of several (diacylmethylidene)diferrocenylcyclopropenes (8a-c) and 1,1-diacyl-2,3-diferrocenyl-4-methylsulfanylbuta-1,3-dienes (10a-c) are studied.     

The solvent extraction and spectrophotometric determination of vanadium (V) with 4-(2-thiazolylazo)resorcinol and tetrazolium salts

The formation and extraction of ion-associate complexes between the vanadium(V)-4-(2-thiazolylazo)resorcinol (TAR) anionic chelate and the cations of some mono-and ditetrazolium salts {3-(4,5-dimethyl-2-thiazol)-2,5-diphenyl-2H-tetrazolium bromide (Thiazolyl blue, MTT), 3-(2-naphtyl)-2,5-diphenyl-2H-tetrazolium chloride (Tetrazolium violet), 2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyl-2H-tetrazolium chloride (Iodonitrotetrazolium chloride), 3,3′-[3,3′-dimetoxy(1,1′-biphenyl)-4,4′-diyl]-bis[2,5-diphenyl-2H-tetrazolium] chloride (Tetrazolium blue chloride) and 3,3′-(3,3′-dimetoxy-4,4′-biphenylene)bis[2-(4-nitrophenyl)-5-phenyl-2H-tetrazolium chloride] (Nitro blue tetrazolium chloride)} have been studied. The optimum extraction conditions have been found. The composition of the V-TAR-monotetrazolium and V-TAR-ditetrazolium complexes extracted into chloroform has been determined to be 1:2:3 and 2:4:3 respectively. The extraction, distribution and association constants, and the recovery factors have been calculated. The relationship between the molecular weight of tetrazolium cations, and the association constants of their complexes has been discussed. The special behavior of the tetrazolium cations, containing-NO₂ groups has been noticed. The effects of foreign ions and reagents on the extraction of vanadium with TAR and the best tetrazolium salt-MTT have been studied. A sensitive, selective, simple and fast method for the determination of vanadium has been developed.      

Transformation of white phosphorus in the coordination sphere of nickel complexes with σ-donating ligands

Oxidation of white phosphorus in the coordination sphere of the nickel(ii) complex with 1,1,1-tris(diphenylphosphinomethyl)ethane and 1,1",5,5"-bis[methylenedi(p-phenylene)]di(3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane) was shown to be possible and accompanied by the transformation of P₄ into the -P₃ ligand. The change in the nickel state was monitored by cyclic voltammetry, ³¹P NMR spectroscopy, ESR, and IR spectroscopy.     

Synthesis and anticonvulsant activity of some new arylidenehydrazides and 4-thiazolidinones

Summary A number of N,N-bis(arylidene)mono(1-methylpropyl)malonic acid dihydrazides (3a–c), 1,1-bis[[(2-aryl-4-thiazolidinone-3-yl)amino]carbonyl]-2-methylbutanes (4a–e), and 1,1-bis[[(3-alkyl/aryl-4-thiazolidinone-2-yl)hydrazono]carbonyl]-2-methylbutanes (6a–i) have been synthesized, characterized and evaluated for anticonvulsant activity. All tested compounds showed significant activity (10 to 60% protection) against pentylenetetrazole induced seizures.

---

Synthese einiger neuer Arylidenhydrazide und 4-Thiazolidinone sowie Untersuchung ihrer krampflösenden Eigenschaften

Zusammenfassung Eine Reihe von N,N-Bis(aryliden)mono(1-methylpropyl)malonsäure dihydraziden, (3a–c), 1,1-Bis[[2-Aryl-4-thiazolidinon-3-yl)amino]carbonyl]-2-methylbutanen (4a–e) und 1,1-Bis[[3-alkyl/aryl-4-thiazolidinon-2-yl)hydrazono]carbonyl]-2-methylbutanen (6a–i) wurden hergestellt, charakterisiert und auf ihre antikonvulsive Wirkung geprüft. Alle getesteten Substanzen zeigen relevante Aktivitäten gegen durch Pentilentetrazol induzierte Krämpfe (10–60% Schutz).

     

Synthesis of 2,5 -Bis(4-methyl-2-thienyl)thiophene and 2,5-Bis(4-methyl-2-thienyl)pyrrole

Syntheses of 2,5-bis(4-methyl-2-thienyl)thiophene 3 and 2,5-bis(4-methyl-2-thienyl)pyrrole 4 are described. The key step involves Stetter reaction between 4-methyl-2-thiophenecarboxaldehyde and divinyl sulfone. Cyclizaton of the resulting 1,4-bis-(4-methyl-2-thienyl)-1,4-butanedione 2 with Lawesson's reagent gives 2,5-bis(4-methyl-2-thienyl)thiophene 3, whereas condensation with ammonium acetate provides the 2,5-bis(4-methyl-2-thienyl)pyrrole 4.