Polymeric alkenoxy amino acid surfactants: II. Chiral separations of beta-blockers with multiple stereogenic centers

Two amino acid-based (leucine and isoleucine) alkenoxy micelle polymers were employed in this study for the separation of multichiral center-bearing beta-blockers, nadolol and labetalol. These polymers include polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL). Detailed synthesis and characterization were reported in our previous paper [26]. It was found that poly-L-SUCIL gives better chiral separation than poly-L-SUCL for both nadolol and labetalol isomers. The use of 50-100 mM poly-L-SUCIL as a single chiral selector provided separation of four and three isomers of labetalol and nadolol, respectively. Further optimization in separation of both enantiomeric pairs of nadolol and labetalol was achieved by evaluation of type and concentration of organic solvents, capillary temperature as well type and concentration of cyclodextrins. A synergistic approach, using a combination of poly-L-SUCIL and sulfated beta-CD (S-beta-CD) was evaluated and it showed dramatic separation for enantiomeric pairs of nadolol. On the other hand for labetalol enantiomers, separation was slightly decreased or remain unaffected using the dual chiral selector system. Finally, simultaneous separation of both nadolol and labetalol enantiomers was achieved in a single run using 25 mM poly-L-SUCIL and 5% w/v of S-beta-CD in less then 35 min highlighting the importance of high-throughput chiral analysis.     

Polymeric alkenoxy amino acid surfactants: III. Chiral separations of binaphthyl derivatives

Micellar electrokinetic chromatography (MEKC) was investigated for the enantiomeric separations of three binaphthyl derivatives ((+/-)-1,1'-bi-(2-naphthol) (BOH), (+/-)-1,1'-binaphthyl-2,2'-diyl hydrogenphosphate (BNP), and (+/-)-1,1'-binaphthyl-2,2'-diamine (BNA)) using two recently synthesized chiral polymeric surfactants (polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL)) in our laboratory. Enantiomeric separation (resolution and selectivity) of the binaphthyl derivatives was influenced by polymerization concentration of the monomeric surfactant, pH, type and concentration of the background electrolyte (BGE) as well as concentration of the polymeric surfactant. Two BGEs (dibasic phosphate and Tris-borate) were compared for this study. The use of dibasic phosphate as BGE in poly-L-SUCL provides baseline resolution of (+/-) BOH and (+/-) BNP, however, no resolution and selectivity at all was observed for (+/-) BNA. A similar approach was adopted with Tris-borate-poly-L-SUCL system at fixed pH 10.1, which resulted in baseline resolution of all three binaphthyl derivatives. Although R(s) of binaphthyl derivatives was always higher and electroosmotic flow (EOF) was always lower using Tris-borate than with dibasic phosphate, the selectivity values for the two buffer systems did not differ significantly. In addition, it was found that poly-L-SUCL provided better enantiomeric resolution and selectivity for (+/-) BOH and (+/-) BNA, while poly-L-SUCIL provided enhanced enantiomeric resolution but similar enantioselectivity for (+/-) BNP. This indicates that the depth of analyte penetration into the palisade layer and the micellar core are responsible for chiral recognition of hydrophobic analyte (e.g., (+/-) BOH, and (+/-) BNA) whereas for moderately hydrophobic analyte (e.g., (+/-) BNP) interaction with the polar head group seems to dictate chiral recognition. Simultaneous enantioresolution of all three binaphthyl derivatives was possible in a single electrophoretic run using either poly-L-SUCL or poly-L-SUCIL. Further comparison of the two polymeric surfactants showed that poly-L-SUCL provided slightly longer analysis time than poly-L-SUCIL but the use of the former polymeric surfactant should be preferred due to its ability to provide complete baseline resolution and higher selectivity of all the three atropisomers with a wider chiral window.     

Polymeric alkenoxy amino acid surfactants: V. Comparison of carboxylate and sulfate head group polymeric surfactants for enantioseparation in MEKC

In this work, six amino acid derived (L-leucinol, L-leucine, L-isoleucinol, L-isoleucine, L-valinol, and L-valine) polymeric chiral surfactants with carboxylate and sulfate head groups that were recently synthesized in our laboratory [30, 33, 35] are compared for the simultaneous enantioseparation of several groups of structurally similar analytes under neutral and basic pH conditions. The physicochemical properties of the monomers and polymers of both classes of sulfated and carboxylated surfactants are compared. In addition, cryogenic high-resolution electron microscopy showed tubular structures with distinct order of the tubes of 50-100 nm width. A Plackett-Burmann experimental design is used to study the factors that influence the chiral resolution and analysis time of ten structurally related phenylethylamines (PEAs). It is observed that increasing the number of hydroxy groups on the benzene ring of the PEAs resulted in deterioration of enantioseparation using any of the six polymeric surfactants. For all three classes of PEAs, polysodium N-undecenoxycarbonyl-L-amino acidate (poly-L-SUCAA)-type surfactants provided enhanced resolution compared to that of polysodium N-undecenoxycarbonyl-L-amino acid sulfates (poly-L-SUCAASS). Several classes of basic and neutral chiral compounds (e.g., beta-blockers benzoin derivatives, PTH-amino acids, and benzodiazepines) also provided improved chiral separations with poly-L-SUCAA. Among the poly-L-SUCAAs, polysodium N-undecenoxycarbonyl-L-isoleucine sulfate (poly--SUCL) exhibited overall the best enantioseparation capability for the investigated basic and neutral compounds, while among the poly-L-SUCAASs, polysodium N-undecenoxycarbonyl-L-isoleucine sulfate (poly-L-SUCILS), and polysodium N-undecenoxycarbonyl-L-valine sulfate (poly-L-SUCVS) proved to be equally effective for enantioseparation. This work clearly demonstrates that variation in the head group of polymeric alkenoxy amino acid surfactants has a significant effect on chiral separations.     

Chiral micellar electrokinetic chromatography-atmospheric pressure photoionization of benzoin derivatives using mixed molecular micelles

In the present work we report, for the first time, the successful on-line coupling of chiral MEKC (CMEKC) to atmospheric pressure photoionization MS (APPI-MS). Four structurally similar neutral test solutes (e.g. benzoin (BNZ) derivatives) were successfully ionized by APPI-MS. The mass spectra in the positive ion mode showed that the protonated molecular ions of BNZs are not the most abundant fragment ions. Simultaneous enantioseparation by CMEKC and on-line APPI-MS detection of four photoinitiators, hydrobenzoin, BNZ, benzoin methyl ether, benzoin ethyl ether, were achieved using an optimized molar ratio of mixed molecular micelle of two polymeric chiral surfactants (polysodium N-undecenoxy carbonyl-L-leucinate and polysodium N-undecenoyl-L,L-leucylvalinate). The CMEKC conditions, such as voltage, chiral polymeric surfactant concentration, buffer pH, and BGE concentration, were optimized using a multivariate central composite design (CCD). The sheath liquid composition (involving %v/v methanol, dopant concentration, electrolyte additive concentration, and flow rate) and spray chamber parameters (drying gas flow rate, drying gas temperature, and vaporizer temperature) were also optimized with CCD. Models built based on the CCD results and response surface method were used to analyze the interactions between factors and their effects on the responses. The final overall optimum conditions for CMEKC-APPI-MS were also predicted and found in agreement with the experimentally optimized parameters.     

Chiral separation with dipeptide-terminated polymeric surfactants: the effect of an extra heteroatom on the polar head group

Chiral recognition of two binaphthyl derivatives and three benzodiazepines were studied by use of polymeric surfactants in electrokinetic chromatography. Four specific dipeptide terminated (multichiral) micelle polymers were synthesized for this study. These include poly (sodium-N-undecanoyl-L-alanyl-leucinate)-(poly L-SUAL), poly (sodium-N-undecanoyl-L-valyl-leucinate) (poly L-SUVL), poly (sodium-N-undecanoyl-Lseryl-leucinate) (poly L-SUSL), and poly(sodium-N-undecanoyl-L-threonyl-leucinate) (poly L-SUTL). In addition to the chiral separation study, the physicochemical properties (critical micelle concentration and specific rotation) of each polymer were investigated. The molecular weights of the various dipeptide-terminated micelle polymers were determined using analytical ultracentrifugation. These dipeptide-terminated micelle polymers were designed to study the effect of the extra heteroatom at the polar head group of the micelle polymer (i.e., poly L-SUSL compared to poly L-SUAL and poly L-SUTL compared to poly L-SUVL) on the enantiomeric separation of the binaphthyl derivatives and benzodiazepines. The synergistic effect of three chiral centers (poly L-SUTL) provided improved resolution over that of two chiral centered dipeptide-terminated micelle polymer in the case of (+/-)-temazepam, (+/-)-oxazepam, (+/-)-binaphthol, and (+/-)-binaphthol phosphate. The chiral recognition mechanisms in these cases were additionally controlled by the presence of the extra heteroatom located on the polar head group of the micelle polymers.     

Simultaneous chiral separation and determination of ephedrine alkaloids by MEKC-ESI-MS using polymeric surfactant I: method development

In this work, simultaneous separation of eight stereoisomers of ephedrine and related compounds ((+/-)-ephedrine, (+/-)-pseudoephedrine, (+/-)-norephedrine and (+/-)-N-methylephedrine) was accomplished using a polymeric chiral surfactant, i.e. polysodium N-undecenoxycarbonyl-L-leucinate (poly-L-SUCL) by chiral (C)MEKC-ESI-MS. The conditions of CMEKC were first investigated. The baseline separation of all eight stereoisomers of ephedrine and related compounds was achieved under optimum CMEKC conditions (35 mM poly-L-SUCL, 15 mM NH(4)OAc, pH 6.0, 30% v/v ACN, 30 kV and 20 degrees C) in less than 30 min. Next, a central composite design for response surface modeling has been described to evaluate the electrospray chamber parameters and the sheath liquid conditions. Optimum mass abundance of stereoisomers of ephedrine and related compounds was observed using the spray chamber parameters, namely 250 degrees C drying gas temperature and 8 L/min drying gas flow rate at a nebulizer pressure of 4 psi. Furthermore, the experimental design indicates that the optimum mass abundance of the stereoisomers of ephedrine and related compounds can be obtained using a sheath liquid containing 80:20 v/v methanol-water, 5 mM NH(4)OAc at pH 8.5 delivered at 5 microL/min. Finally, compared to MEKC-UV, the use of poly-L-SUCL in MEKC-MS provided significantly higher sensitivity for stereoisomers of ephedrine and related compounds.     

Polymeric alkenoxy amino acid surfactants: IV. effects of hydrophobic chain length and degree of polymerization of molecular micelles on chiral separation of beta-blockers

Four alkenoxy leucine-based surfactants with C8-C11 chains containing a terminal double bond, and one C11 chain surfactant with a terminal triple bond are synthesized and characterized in monomeric and polymeric forms. These polymeric pseudophases are then utilized to study the influence of chain length and DP for the enantioseparations of seven beta-blockers in MEKC. Variations in chain length and concentration of polymeric surfactants showed significant effects on the chiral resolution (Rs) and efficiency (N). A relatively large elution range combined with the highest polarity and aggregation number (A) but the lowest retention time, partial specific volume, and optical rotation generated with C8-polymeric surfactant results in simultaneous enantioseparation of all seven beta-blockers with higher N and R(s). In particular, highly hydrophobic beta-blockers are better resolved with shorter hydrocarbon chain even at higher surfactant concentration, which is unachievable with longer chain surfactant. On the other hand, polymer derived from C11-triple bond provided smaller A value compared to C11-double bond surfactant. However, chiral Rs of hydrophobic beta-blockers are still achievable with the C11-triple bond surfactant with enhanced N and shorter analysis time. In addition, effect of polymerization concentration is evaluated by polymerizing all five surfactants at five times their respective CMCs and 100 mM equivalent monomer concentrations. Polymerization of shorter chain (C8 and C9) double-bonded surfactants at five times their respective CMCs results in higher A values with better chiral Rs and N compared to the same two surfactants polymerized at 100 mM.     

Glycine-based polymeric surfactants with varied polar head group: II. chemical selectivity in micellar electrokinetic chromatography using linear solvation energy relationships

A series of four acyl and four alkenoxy glycinates (i.e., mono-, di-, tri-, and tetraderivatives of polysodium N-undecenoyl glycinate (poly-SUGs) as well as polysodium N-undecenoxy carbonyl glycinates (poly-SUCGs)) were compared for simultaneous separation of nonhydrogen bonding (NHB), hydrogen-bond acceptor (HBA), and hydrogen-bond donor (HBD) solutes. An increase in the number of glycine units in the polar head group of polymeric surfactant decreases both the retention and the migration window of all solutes with some changes in separation selectivity. The poly(sodium N-undecenoxy carbonyl-glycinate) (poly-SUCG1) with one glycine unit was the least polar surfactant and has the lowest phase ratio, but this monoglycinate surfactant provided the best simultaneous separation of 10-NHBs and 8-HBAs. On the other hand, 9-HBDs were well separated using any of the six mono-, di-, and triglycinate surfactants compared to the two tetraglycinates. Linear solvation energy relationships (LSERs) and separation of the geometrical isomers studies were also performed to further envisage the selectivity differences. From LSER studies, the phase ratio and hydrogen-bond-donating strength of the poly-SUG series of surfactant were found to increase with an increase in the size of the head group, but no clear trends were observed for poly-SUCG surfactants. The cohesiveness for all poly-SUG and poly-SUCG was positive, but the values were generally lower (with exception of the poly(sodium N-undecenoyl glycyl-glycyl-glycinate)) at a higher number of glycine units. Finally, the poly(sodium N-undecenoyl glycinate) and poly-SUCG1 were found to be the two best polymeric surfactants as they provided relatively higher shape selectivity for separation of two of the three sets of geometrical isomers.     

Application of polymeric surfactants in micellar electrokinetic chromatography-electrospray ionization mass spectrometry of benzodiazepines and benzoxazocine chiral drugs

Chiral micellar EKC (CMEKC) coupled to ESI-MS using polymeric surfactants as pseudostationary phases is investigated for simultaneous enantioseparation of two benzodiazepines, (+/-)-oxazepam ((+/-)-OXA) and (+/-)-lorazepam ((+/-)-LOR), and one benzoxazocine, (+/-)-nefopam ((+/-)-NEF). First, enantioselectivity and electrospray sensitivity of six chiral polymeric surfactants for all three chiral compounds are compared. Second, using poly(sodium N-undecenoyl-L-leucinate) as pseudostationary phase, the organic modifiers (methanol (MeOH), isopropanol, and ACN) are added into the running buffer to further improve chiral resolution (RS). Next, a CMEKC-ESI-MS method for the simultaneous enantioseparation of two benzodiazepines is further developed by using a dipeptide polymeric surfactant, poly(sodium N-undecenoxy carbonyl-L,L-leucyl-valinate) (poly-L,L-SUCLV). The CMEKC conditions including nebulizer pressure, capillary length, ammonium acetate concentration, pH, poly-L,L-SUCLV concentration, and capillary temperature were optimized to achieve maximum chiral RS and highest sensitivity of MS detection. The spray chamber parameters (drying gas temperature and drying gas flow rate) as well as sheath liquid conditions (MeOH content, pH, flow rate, and ionic strength) were found to significantly influence MS S/N of both (+/-)-OXA and (+/-)-LOR. Finally, a comparative study between simultaneous UV and MS detection showed high plate numbers, better chiral RS, and enhanced detectability with CMEKC-MS. However, speed of analysis was faster using CMEKC-UV.     

Organic reactions in chiral micelles: 7. The structural effects on the asymmetric oxidation of prochiral sulfides in chiral micelles

A variety of phenyl alkyl sulfides were oxidized enantioselectively with NaIO₄ in chiral micellar systems formed from eight chiral surfactants, to give optical active sulfoxides. The enantiomer excesses ranged from 1.6 to 15.0%. To understand the mechanistic detail of this asymmetric oxidation in chiral micelle, the effects of structure both in substrates and surfactants on the optical yield of the oxidation were studied and discussed. Generally, increasing the alkyl chain length both in surfactants and in substrates enhances the optical yield, also the surfactant with hydroxy group at its appropriate position gives better enantioselectivity, suggesting the enzymic characteristics of the chiral micelle.     

Understanding chiral molecular micellar separations using steady-state fluorescence anisotropy, capillary electrophoresis, and NMR

Chiral separations employing four diastereomers of poly sodium N-undecanoyl leucylvalinate (p-SULV) as chiral selectors are probed by use of MEKC, steady-state fluorescence anisotropy, and NMR. By employing diastereomers and thus altering the stereochemistry of a single amino acid in a systematic way, one may control the enantiorecognition ability of the chiral selector. As a result, one can gain a better understanding of the mechanisms of chiral recognition for the two classes of neutral or anionic chiral analytes studied. Evaluation of the chiral interactions leading to chiral separations confirmed our earlier observation of a strong relationship between the selectivity (alpha) observed using a chromatographic separation technique (MEKC) and that determined from the spectroscopic parameter, beta. A linear alpha versus beta relationship was observed for the molecular micelle p-(L)-SULV with all eight analytes included in this study. However, as we earlier predicted, different groups of analytes had different slopes, i.e., values of m, suggesting different chiral separation mechanisms. Evaluation of the data allowed a grouping of the analytes according to the primary site of chiral interaction with the leucine or valine moiety of molecular micelle chiral headgroup.     

A comparison of ionic liquids to molecular organic solvents as additives for chiral separations in micellar electrokinetic chromatography

In this study, we report the effects of adding ionic liquids (ILs), as compared to adding conventional molecular organic solvents (MOSs), to aqueous buffer solutions containing molecular micelles in the separation of chiral analyte mixtures in micellar EKC (MEKC). The molecular micelle used in this study was polysodium oleyl-L-leucylvalinate (poly-L-SOLV). The ILs were 1-alkyl-3-methylimidazolium tetrafluoroborate, where the alkyl group was ethyl, butyl, hexyl, or octyl. These ILs were chosen due to their hydrophobicity, good solvating, and electrolyte properties. Thus, it was expected that these ILs would have favorable interactions with chiral analytes and not adversely affect the background current. Common CE buffers, mixed with a molecular micelle, and an IL or a MOS, were used for these chiral separations. The buffers containing an IL in the concentration range of 0.02-0.1 v/v were found to support a reasonable current when an electric field strength of 500 V/cm was applied across the capillary. However, a current break down was observed for the buffers containing more than 60% v/v MOS on application of the above-mentioned electric field. The chiral resolution and selectivity of the analytes were dependent on the concentration and type of IL or MOS used.     

Chiral separations in microemulsion electrokinetic chromatography. Use of micelle polymers and microemulsion polymers

In this study, microemulsions of the chiral surfactant polysodium N-undecenoyl-D-valinate (poly-D-SUV) was utilized for enantiomeric separation by investigating two approaches using polymeric chiral surfactant in microemulsion electrokinetic chromatography (MEEKC). In the first approach, poly-D-SUV was used as an emulsifier surfactant along with 1-butanol and n-heptane. Enantioseparation of anionic or partially anionic binaphthyl derivatives, anionic barbiturates, and cationic paveroline derivatives were achieved by varying the mass fraction of 1-butanol, n-heptane and poly-D-SUV. For anionic or partially anionic analytes, relatively lower mass fractions of n-heptane, and poly-D-SUV were found to give optimum chiral separations as compared to that for cationic solutes. In the second approach, the chiral microemulsion polymer was prepared by polymerizing mixtures of 3.50% (w/w) of sodium N-undecenoyl-D-valinate (D-SUV) and 0.82% (w/w) of n-heptane (core phase) at varying concentration of 1-butanol. After polymerization, the n-heptane and 1-butanol were removed to yield solvent free microemulsion polymers (MPs) which were then utilized for the separation of anionic binaphthyl derivatives and anionic barbiturates. When MPs of D-SUV were utilized for chiral separation, 1.00% (w/w) 1-butanol and 3.50% (w/w) 1-butanol was optimum for enantioseparation of (+/-)-BNP and (+/-)-BOH, respectively. On the other hand, for anionic (+/-)-barbiturates very low concentration of butanol (0.25%, w/w) provided optimum resolution. Compared with micellar electrokinetic chromatography (MEKC), the use of micelle polymers or microemulsion polymers in MEEKC showed dramatic enhancement for resolution of (+/-)-BNP, while this enhancement was less dramatic for other binaphthyls [(+/-)-BOH, (+/-)-BNA] as well as for (+/-)-barbiturates and (+/-)-paveroline derivatives. However, higher separation efficiency of the enantiomers was always observed with MEEKC than in MEKC.     

Unusual aqueous-phase behavior of cationic amphiphiles with hydrogen-bonding headgroups

Two cationic surfactants with hydroxyl and carbamate hydrogen-bonding sites at their headgroups were synthesized. Both surfactants are ionic liquids (one of them at room temperature). Samples are isotropic solutions over the entire 0-100% concentration range, which is highly unusual for ionic surfactants. Surface tension, NMR, and conductivity measurements indicate classical micelle formation in aqueous solutions with CMCs below 10 mM. Pulse-gradient spin-echo (PGSE) NMR confirms micelle formation and provides micellar hydrodynamic radii of about 3.8 nm. Because this value is larger than the length of the extended surfactant molecules, about 2.7 nm, it appears that hydrogen-bonded water of hydration contributes substantially to the effective micelle size. At higher concentrations (above 25 wt %), surfactant solutions become viscous, but line broadening in the NMR is small relative to that found with a conventional cationic surfactant (CTAB). Thus, long rod formation, the source of line broadening in the latter, is absent with the new surfactants. Finally, PGSE NMR data show a 5-fold decrease in the diffusion coefficient between 5 and 20 wt %, above which the diffusion coefficients remain constant. The results are best explained by micelle clustering that is likely aided by intermicellar hydrogen bonding. The possibility of an isotropic liquid crystal (LC) phase with cubic symmetry is discussed and dismissed, demonstrating that LC formation of ionic surfactants at high concentrations, the usual behavior in past work, need not occur. Nor is there a definite connection between ionic liquid behavior and isotropic morphology.     

Synthesis and properties of novel cationic gemini surfactants with adamantane spacer

Novel quaternary ammonium cationic gemini surfactants, with two hydrocarbon chains and an adamantane core, were designed and synthesized by three-step reactions from adamantane. The structure of obtained surfactants were confirmed by 1H NMR, FTIR and elements analysis and the surface properties of these surfactants were also studied by surface tension measurements. These target surfactants exhibit much lower critical micelle concentrations （CMC） and higher efficiency in lowering the surface tension of water than typical surfactants.     

Glycine-based polymeric surfactants with varied polar head group: I. synthesis, characterization, and application in micellar electrokinetic chromatography

The monomers and polymers of four anionic amide type sodium undecenoxy carbonyl glycinate (SUCG) surfactants and four anionic carbamate type sodium undecenoyl glycinate (SUG) surfactants with 1-, 2-, 3-, and 4-glycine unit as head group were synthesized and characterized. The CMC and aggregation number (A) for all eight surfactants were determined using fluorescence spectroscopy. In addition, the CMC values of these surfactants were also projected by surface tension and CE. The CMC of the monomers decreases with increases in the size of glycine head groups and correlates well when the fluorescence method was compared to CE. The A number increases and partial specific volume (V) decreases with increase in size of the head group of both monomers and polymers. However, A and V are always lower for the polymers than the corresponding monomers. The electrophoretic and chromatographic parameters of micelle polymers of SUG and SUCG were also examined. The coefficient of EOF increases with the increase in size of the head group but the electrophoretic mobility decreases which results in a decrease in the elution range. The retention data suggest that the selectivity differences among the mono-, di-, and tripeptide derivatives of poly-SUCG surfactants are relatively higher compared to the derivatives of poly-SUG series.     

Chiral separation of polychlorinated biphenyls using a combination of hydroxypropyl-gamma-cyclodextrin and a polymeric chiral surfactant

Chiral separation of moderately to highly hydrophobic polychlorinated biphenyls (PCBs) using a conventional chiral micelle or a polymeric chiral surfactant, as the single chiral selector is very difficult since the hydrophobic interactions between the chiral PCB and the monomeric or polymeric surfactant is very strong. Combined use of a polymeric chiral surfactant, polysodium N-undecanoyl-D-valinate (poly-D-SUV) with hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD) was successful in cyclodextrin modified electrokinetic chromatography (CD-EKC) enantioseparation of PCB congeners. Addition of HP-gamma-CD to the background electrolyte containing poly-D-SUV functioned to improved chiral resolution for the PCBs and reduce the analysis time for these congeners. In addition, concentration of methanol, concentration of 2-(N-cyclohexylamino) ethanesulfonic acid (CHES) buffer and separation voltage was also varied to optimize multicomponent separation of five chiral PCBs. Simultaneous separation and enantioseparation of all five PCBs was possible in less than 50 min under optimized conditions that requires a 5 mM CHES solution buffered at about pH 10 with 1.5% w/v (ca. 60 mM) poly-D-SUV and 16 mM HP-gamma-CD. In addition, 1 M urea and 20% v/v methanol should be added as organic modifier and the capillary temperature maintained at 45 degrees C. As expected the polymeric surfactant showed improved chiral resolution of PCBs over conventional micelles of SUV. Under optimized conditions, when CD-EKC of chiral PCBs using poly-D-SUV was compared to sodium dodecyl sulfate (SDS), better resolution, higher efficiency and shorter analysis time was achieved with poly-D-SUV.     

Synthesis of novel quaternary ammonium surfactants containing adamantane

A series of novel quaternary ammonium surfactants containing adamantane were designed and synthesized from 1-adamantanecarboxylic acid.The structures of target surfactants were confirmed by]H NMR,elements analysis and FTIR.Surface properties of these surfactants were investigated.Due to the lipophilicity of adamantane,the critical micelle concentration（CMC） and C₂₀ values of the synthesized quaternary ammonium surfactants are lower than that of conventional quaternary ammonium surfactants.     

Recent progress in the development,characterization and application of polymeric pseudophases for electrokinetic chromatography

This review article details the development, characterization and application of polymeric materials as pseudostationary phases for electrokinetic chromatography over the past two years. Recent developments in cationic polymers and anionic siloxane, acrylamide and polymerized surfactants (micelle polymers) are reviewed. Also reviewed is recent progress in the development and characterization of chiral polymeric phases for chiral separations by electrokinetic chromatography, and application of a polymeric pseudophase with electrospray ionization mass spectrometric detection.     

Recent progress in the use of soluble ionic polymers as pseudostationary phases for electrokinetic chromatography

This review concerns the development, characterization, and application of soluble ionic polymeric materials as pseudostationary phases for electrokinetic chromatography since 2002. Cationic polymers, anionic siloxanes, polymerized surfactants (micelle polymers), and chiral polymers are considered. The use of stable suspensions of polymer nanoparticles in electrokinetic chromatography is also reviewed.