金纳米粒子共振散射与共振吸收的关系

金纳米粒子共振散射与共振吸收的关系;金纳米粒子;共振散射;共振吸收     

乳液聚合法制备纳米金/聚苯乙烯复合粒子

以氯金酸为前驱体,十二烷基硫醇和硼氢化钠分别作为稳定剂和还原剂,采用相转移法制备了单分散的金纳米粒子.将金纳米粒子通过乳液聚合的方法制备了纳米金/聚苯乙烯复合粒子.通过紫外-可见吸收光谱(UV-Vis)研究了纳米金和纳米金/聚苯乙烯复合粒子的光吸收特性,使用傅立叶变换红外光谱(FT-IR)、X射线衍射(XRD)、透射电子显微镜(TEM)和动态光散射(DLS)对产物的组成、晶体结构、形貌、以及粒径进行了表征.结果表明,复合粒子为粒径分布较窄的球形,其中的金纳米粒子为面心立方结构.热失重分析(TGA)说明制备的纳米金/聚苯乙烯复合粒子具有很好的热稳定性.     

金纳米粒子的合成、特性及其在生物医学检测中的应用研究进展

近年来,纳米技术越来越广泛的应用到各个领域,金纳米粒子因其具有许多优良的物理、化学及生物学性质而引起了人们特别的关注。本文综述了金纳米粒子几种经典的合成方法,以及基于金纳米粒子独特的理化性质在病原体、核酸蛋白质检测方面的最新研究进展。     

金纳米粒子与单链DNA的相互作用

研究了金纳米粒子与单链DNA在不同pH值时的相互作用以及金纳米粒子与不同碱基序列单链DNA的相互作用. 结果表明, 在pH为12.6的强碱性条件下, 单链DNA能使金纳米粒子稳定分散在溶液中; 在pH为1.4的强酸性条件下, 单链DNA能保护金纳米粒子不发生融合, 而只发生团聚, 且团聚现象具有可逆性. 不同寡核苷酸对金纳米粒子的亲和力按poly dA>poly dC>poly dT的顺序依次减弱. 单链DNA对纳米金的保护作用强度与单链DNA的长度成正比.     

藤茶干粉提取液还原制备金纳米粒子

用藤茶干粉提取液生物还原氯金酸溶液实现了金纳米粒子绿色制备,通过紫外-可见分光光度计、透射电子显微镜和粒度分布等技术手段对金纳米粒子形态等物性进行了表征,运用控制变量法探究了金纳米粒子生物合成的规律。研究发现,金纳米粒子的粒径、粒径分布、形状和稳定性受反应体系pH值、温度以及氯金酸的用量影响。pH6.47或藤茶干粉提取液过量时会引起纳米金的团聚;温度升高,金纳米粒子平均粒径会减小。通过变量控制,可以实现金纳米粒子绿色合成的有效控制。     

各向异性金纳米粒子的制备及其在催化中的应用

尽管有关金纳米粒子催化的研究工作很多,但其中大多数都是采用传统的浸渍法将金盐负载到载体上、共沉淀或沉积-沉淀法制得负载的纳米粒子,但这些方法并未吸收最新的纳米技术。最近,金催化剂的研究者开发了在胶态悬浮液中制取金属纳米粒子,然后进行固载,从而使得单金属和双金属催化剂的催化活性和形貌控制取得较大进展。另一方面,最近十年出现了金纳米粒子合成的高级控制技术,得到了许多各向异性的金纳米粒子,且很容易制得新的形貌,可以控制纳米粒子的表面原子配位数和光学特性(可调的等离子体带),这些都与催化密切相关。这些形貌包括纳米棒、纳米星、纳米花、树枝状纳米结构或多面体纳米粒子等。除了高度关注各向异性金纳米粒子的最新开发的制备方法和性质,本综述也清楚地总结了这些纳米粒子独特的催化性能,以及通过提供更高催化性能的金催化剂、控制暴露的活性位,以及热、电和光催化的鲁棒性和可调性,从而给多相催化领域带来令人惊奇的潜在变革。     

组装在贵金属基底上的金纳米粒子对CO的电化学催化氧化

研究了组装在Au, Pt电极表面的金纳米粒子对CO的电化学催化氧化行为, 首次在实验上观察到较大粒径金纳米粒子(粒径＞10 nm)对CO的电催化氧化活性. 考察了金粒子表面金氧化物对粒子电催化活性的影响, 发现表面金氧化物的形成是金纳米粒子对CO具有电催化氧化活性的前提. 对于相同粒径的金纳米粒子, 随着粒子表面金氧化物量的增加,催化活性增大.     

金核银壳纳米粒子薄膜的制备及SERS活性研究

采用柠檬酸化学还原法制备金溶胶, 通过自组装技术在石英片表面制备金纳米粒子薄膜, 在银增强剂混合溶液中反应获得金核银壳纳米粒子薄膜. 用紫外-可见吸收光谱仪和原子力显微镜(AFM)研究了不同条件下制备的金核银壳纳米粒子薄膜的光谱特性和表面形貌, 并以结晶紫为探针分子测量了金核银壳纳米粒子薄膜的表面增强拉曼光谱(SERS). 结果表明, 金纳米粒子薄膜的分布、银增强剂反应时间的长短对金核银壳纳米粒子薄膜的形成均有重要影响. 制备过程中, 可以通过控制反应条件获得一定粒径的、具有良好表面增强拉曼散射活性的金核银壳纳米粒子薄膜.     

金纳米粒子组装体系粒子密度与SERS强度的关系

利用纳米粒子组装技术制备出金基底／巯基苯胺自组装膜偶联层／金纳米粒子的“三明治”结构。实验结果显示,该结构对偶联层分子的喇曼光谱显示出很好的增强效应,增强因子可达１０＾５;在表面粒子密度（粒子覆盖度）较低时,表面增强喇曼散射（ＳＥＲＳ）强度与表面粒子密度近似呈线性关系;随着表面粒子密度的增加,这种线性关系出现负偏差并在表面粒子密度较高区域出现一个平台;在６０￣１１０ｎｍ范围内大粒径金粒子对喇曼光谱     

一维金纳米粒子链的制备及其光学特性研究

在没有模板存在的条件下, 只用表面活性剂为稳定剂, 制备了一维的金纳米粒子链, 详细考察了链状结构形成时各种试剂浓度、种类及其它外部条件对纳米粒子链形成的影响. 实验发现, 在HAuCl₄ 浓度1～5 mmol•L^－1、十二烷基磺酸钠(SDS)浓度在2～8 mmol•L^－1 (小于其CMC)范围内, 温度由60 ℃ 0.5 h内升高到100 ℃, 并在升温时间内分次将还原剂加完, 反应完成后不老化立即冷却到室温, 可以获得一维金纳米粒子链. 采用紫外可见光谱(UV-Vis)、同步光散射光谱和发射光谱等手段对金纳米粒子链的光学特性进行了研究, 用高分辨透射电子显微镜(HRTEM)研究了金纳米粒子的外观和粒径分布, 结果表明制备的金纳米粒子链是错落有致的链状结构, 结节处可以观察到金原子的排列晶格, 说明金纳米粒子的链状连接不是外部分子作用的结果; 表面等离子体共振吸收峰出现红移现象, 且随着链长的增加红移越明显; 具有非常强的光散射特性, 散射光强度比浓度相同的金纳米粒子高8倍; 发射光谱中明显观察到其三级散射, 表明其具有很好的非线性光学特性. 对金纳米粒子链的形成机理进行了探讨, 认为表面活性剂烷基亲油作用和金原子的聚集作用相互竞争是链状结构形成的原因.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.