硅土/酚酞聚芳醚砜复合材料的制备及性能

使用γ-氨丙基三乙氧基硅烷对硅土进行功能化改性,将功能化的硅土掺入酚酞聚芳醚砜(PES-C)中制备复合材料,并对其热学性能、力学性能及阻隔性能进行表征分析。结果表明,γ-氨丙基三乙氧基硅烷使硅土片层的层间距变大,使硅土处于半剥离状态,且通过溶液共混将表面修饰的片层硅土掺杂于PES-C中更有利于PES-C分子链的插入。所制备的复合材料的T-5%、T-10%和T max分别提升了10.2、10和3.9℃。另外,复合材料的拉伸强度提升8.4 MPa,断裂伸长率提升2.4%,模量提升560.7 MPa。复合材料的氧气渗透系数(P O 2)降低77.4%。     

A DSC study of miscibility and phase separation in crystalline polymer blends of phenolphthalein poly(ether ether sulfone) and poly(ethylene oxide)

The miscibility of blends of phenolphthalein poly(ether ether sulfone) (PES-C) and poly(ethylene oxide) (PEO) was established on the basis of the thermal analysis results. Differential scanning calorimetry (DSC) studies showed that the PES-C/PEO blends prepared by casting from N,N-dimethylformamide (DMF) possessed a single, composition-dependent glass transition temperature (T_g), and thus that PES-C and PEO are miscible in the amorphous state at all compositions at lower temperature. At higher temperature, the blends underwent phase separation, and the PES-C/PEO blend system was found to display a lower critical solution temperature (LCST) behavior. The phase separation process in the blends has also been investigated by using DSC. Annealed at high temperatures, the PES-C/PEO blends exhibited significant changes of thermal properties, such as the enthalpy of crystallization and fusion, temperatures of crystallization and melting, depending on blend composition when phase separation occurred. These changes reflect different characteristics of phase structure in the blends, and were taken as probes to determine phase boundary. From both the thermal analysis and optical microscopy, the phase diagram of the blend system was established. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1383–1392, 1997     

A Thermogravimetric Approach to Study the Influence of a Biodegradation in Soil Test to a Poly(lactic acid)

Summary: An amorphous grade Poly (lactic acid) (PLA) was selected for an accelerated burial in soil test during 450 days. Thermogravimetric analyses were carried out to study the effects of degradation in soil on the thermal stability and the thermal decomposition kinetics. A single stage decomposition process is observed for all degradation times. It is shown that the thermal stability of PLA is slightly affected by degradation in soil. Concerning the study of the thermal decomposition kinetics, Criado master curves were plotted from experimental data to focus the study of the thermodegradation kinetic model.The kinetic methods proposed by Broido and Chang were used to calculate the apparent activation energies (Ea) of the degradation mechanism. These results were compared to the Ea values obtained by the method developed by Coats and Redfern in order to prove the applicability of the former methods to the kinetic study. As expected, non-linear tendency is found out for Ea variation along the degradation times, which can be explained as an evolution by stages.     

含咪唑酮结构聚芳醚砜共聚物的制备与表征

通过共聚的方法在酚酞聚芳醚砜(PES-C)的主链上引入苯并咪唑酮和5,6-二甲基苯并咪唑酮结构,制备了一系列苯并咪唑酮和5,6-二甲基苯并咪唑酮结构含量不同的高玻璃化转变温度(T_g)聚芳醚砜共聚物。利用核磁共振谱(NMR)、傅里叶变换红外光谱仪(FTIR)、热重分析仪(TGA)等技术手段表征了三元共聚物的结构和性能。结果表明,聚芳醚砜共聚物为无定型结构。聚合物具有优异的热性能,并且均呈现出单一的T_g(T_g271℃);随着苯并咪唑酮和5,6-二甲基苯并咪唑酮的摩尔分数的增加,聚合物T_g呈现规律性升高,分别从270℃升高到340和344℃。两种共聚物均能够溶于极性非质子N,N-二甲基甲酰胺(DMF)、N,N-二甲基乙酰胺(DMAc)、二甲基亚砜(DMSO)、N-甲基吡咯烷酮(NMP)及氯仿(CHCl_3)等溶剂中。具有很好的溶解加工性和成膜性,可以进行溶液加工制备韧性的薄膜。     

Poly(dialkoxyethyl itaconates)

The oxidative and non-oxidative degradation of poly(di-methoxy-), poly(di-ethoxy-), poly(di-iso-propoxy-) and poly(di-n-butoxyethyl itaconate) were investigated by thermogravimetry. Characteristic degradation temperatures and apparent activation energies of degradation were determined for the non-oxidative degradation of all the investigated polymers. It was not possible to determine these characteristics in the presence of oxygen as the degradation was accompanied by a secondary exothermic reaction. Based on examination of the monomers, it is supposed that the exothermic reaction is a repolymerisation of the monomers released during the earlier stages of polymer degradation.     

SPEEK/PES-C、SPEEK/SPES-C共混质子交换膜研究

通过在磺化聚醚醚酮(SPEEK,DS=61.68%)中分别混入酚酞型聚醚砜(PES-C)、磺化酚酞型聚醚砜(SPES-C,DS=53.7%)制备出SPEEK/PES-C、SPEEK/SPES-C共混质子交换膜.结果表明,共混的两种聚合物之间均具有较好的相容性.PES-C、SPES-C的混入能有效降低膜的溶胀及甲醇透过,且随着共混量的增加,这种作用越趋明显.纯SPEEK膜在75℃左右溶解,而SPEEK/PES-C(30wt%)、SPEEK/SPES-C(30wt%)共混膜在80℃时溶胀度仅为22.5%、26.32%.在室温至80℃范围内,纯SPEEK及共混膜的甲醇透过系数都在10-7cm2.s-1数量级上,远小于Nafion115膜.在饱和湿度下,温度大于90℃时,SPEEK/PES-C(20wt%)共混膜电导率超过Nafion115膜;温度大于110℃时,SPEEK/SPES-C(30wt%)共混膜电导率与Nafion115膜相当,达到0.11S.cm-1.高电导率,低透醇系数以及明显提高了的可使用温度表明该类共混膜有望在DMFC中使用.     

几种无定型聚芳醚砜(酮)的成环解聚及产物的开环聚合

几种线性高分子量的无定型聚芳醚砜(酮)在非质子极性溶剂二甲基乙酰胺(DMAc)和二甲基甲酰胺(DMF)中,以氟化铯(CsF)为催化剂进行解聚成环,所得环状低聚物由凝胶渗透色谱(GPC)、高效液相色谱(HPLC)和激光质谱(MALDI-TOF-MS)确认,其中酚酞聚醚砜(PES-C)和酚酞聚醚酮(PEK-C)的解聚成环率分别高达86．3％和87．9％．讨论了影响成环率的各种因素．环状产物又在阴离子引发剂联苯双酚钾的作用下进行开环聚合重新得到高分子量的线性产物．     

Poly(ether sulfone)s using a rigid dibenzothiophene dioxide heterocycle

Poly(aryl ether)s were prepared by nucleophilic aromatic substitution using conformationally restricted dichloro‐ and difluorodibenzothiophene dioxide heterocyclic monomers with bisphenol A or bisphenol AF. The heterocyclic monomers were prepared from the bis(4‐halophenyl) sulfones in two steps via lithiation followed by copper catalyzed intramolecular coupling and characterized by ¹H, ¹³C, ¹⁹F NMR spectroscopy and GC/MS. Reactivity of the fluorine containing monomer was examined using semi‐empirical methods and NMR spectroscopy measurements and found to be potentially more reactive than bis(4‐fluorophenyl) sulfone, even with a conformationally locked sulfone as the electron withdrawing group. Successful polymerizations of both the fluorine and chlorine containing monomers with bisphenol A and bisphenol AF nucleophiles were accomplished, providing polymers with number average molecular weights of approximately 45 kg/mol (difluoro monomer) and 10–20 kg/mol (dichloro monomer). The polymers exhibited high T_gs ranging from 238 to 256 °C and displayed good thermal stability with 5% degradation temperatures in air from 453–510 °C, depending on molecular weight and bisphenol composition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3127–3131     

One-pot Synthesis and Characterization of Poly(meta-aryl sulfide sulfone imide imide)

Poly(meta-aryl sulfide sulfone imide imide) (m-PASSII) was synthesized by one-pot process using 4-chlorophthalic anhydride, 3,3′-diamino diphenyl sulfone and sodium sulfide (Na₂S· xH₂O) as starting materials in N-methyl-2-pyrrolidone at atmospheric pressure. The intrinsic viscosity of m-PASSII was obtained with optimum synthesis conditions is 0.21-0.27 dl/g. The polymer and the separated intermediates which generated during the synthesis process were characterized by elemental analysis, FT-IR spectrum, ¹H-NMR spectrum, X-ray diffraction, DSC, TGA and dissolvability experiment. The polymer is found to have excellent thermal performance with glass transition temperature (T _g ) of 224°C and initial degradation temperature (T _d ) of 441°C. Moreover, the polymer is dissolvable in strong polar solvents.     

Laser light scattering of the molecular weight distribution of unfractionated phenolphthalein poly(aryl ether sulfone)

Two unfractionated samples of phenolphthalein poly(aryl ether sulfone) (PES-C) were characterized in CHCl₃ at 25°C by applying a recently developed laser light-scattering (LLS) procedure. The Laplace inversion of precisely measured intensity–intensity time correlation function lead us first to an estimate of the characteristic line-width distribution G(Λ) and then to the translational diffusion coefficient distribution G(D). A combination of static and dynamic LLS results enabled us to determine D = (2.69 × 10⁻⁴)M^−0.553, which agrees with the calibration of D = (2.45 × 10⁻⁴)M^−0.55 previously established by a set of narrowly distributed PES-C samples. Using this newly obtained scaling between D and M, we were able to convert G(D) into a differential weight distribution f_w(M) for the two PES-C samples. The weight-average molecular weights calculated from f_w(M) are comparable to that obtained directly from static LLS. Our results showed that using two broadly distributed samples instead of a set of narrowly distributed samples have provided not only similar final results, but also a more practical method for the PES-C characterization. © 1997 John Wiley & Sons, Inc.     

Thermal degradation of poly(p-phenylene-graft-?-caprolactone) copolymer

The thermal degradation of poly(p-phenylene-graft-?-caprolactone) (PPP), synthesized by Suzuki polycondensation of poly(?-caprolactone) (PCL) with a central 2,5-dibromo-1,4-benzene on the chain with 1,4-phenylene-diboronic acid, has been studied via direct pyrolysis mass spectrometry. The thermal degradation occurred mainly in two steps. In the first step, decomposition of PCL chains occurred. A slight increase in thermal stability of PCL chains was noted. In the second stage of pyrolysis, the decomposition of the polyphenylene backbone takes place. The evolution of CL monomer or small CL segments left on the phenyl ring continued also in the temperature region where degradation of PPP backbone started.     

Synthesis and characterization of ran-copoly (p-phenylene sulfide sulfone/ketone)s

Random copoly(p-phenylene sulfide sulfone/ketone)s (PPSS/K) are prepared in high yield by the polycondensation of sodium hydrosulfide (NaSH) with bis(4-chlorophenyl) sulfone (BCPS) and 4,4′-dichlorobenzophenone (DCBP). The polymerization is conducted between 200–220°C, depending on the composition of the copolymer, and in the presence of water without any detrimental effects to the molecular weight. The copolymers with sulfone/ketone mole ratios (S : K) > 25 : 75 are amorphous, while the copolymers with S : K ratios ≤ 25 : 75 are crystalline. These materials form tough, creaseable films and exhibit a linear increase in the glass transition temperature with increasing sulfone content. Sulfuric acid solutions of the copolymers are dark orange to red and display an increasing λ_max in the uv-visible spectra as the S:K ratio of the copolymers decreases. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

磺化聚醚酰亚胺/聚醚砜共混型质子交换膜的制备及其性能

以磺化聚醚酰亚胺(SPEI)和聚醚砜(PES)为原料, 采用溶液共混法成功制备出了SPEI/PES共混型质子交换膜,并经热重分析、AFM、SEM等对膜的结构和性能进行了表征. 结果表明, 共混膜较纯SPEI膜具有更高的热稳定性和较低的溶胀性; 在室温环境下, 共混膜在干态和湿态时均具有优异的机械性能; 与纯SPEI膜相比, 共混膜的形态结构更为致密, 这将有利于降低甲醇的渗透性. 采用交流阻抗法和隔膜扩散法分别考察了膜的质子传导性和阻醇性能, 对于共混质量比为50/50的膜来说, 其质子传导率达到了5.5 mS·cm-1的水平, 能满足质子交换膜的需求, 但其甲醇渗透系数明显降低, 仅为市用Nafion 112膜的5%, 这表明该共混膜有望作为一种新型的直接甲醇燃料电池用质子交换膜.     

Synthesis, characterization and thermal degradation mechanism of three poly(alkylene adipate)s: Comparative study

Three high molecular weight aliphatic polyesters derived from adipic acid and the appropriate diol - poly(ethylene adipate) (PEAd), poly(propylene adipate) (PPAd) and poly(butylene adipate) (PBAd) - were prepared by two-stage melt polycondensation method (esterification and polycondensation) in a glass batch reactor. Intrinsic viscosities, GPC, DSC, NMR and carboxylic end-group measurements were used for their characterization. Mechanical properties of the prepared polyesters showed that PPAd has similar tensile strength to low-density polyethylene while PEAd and PBAd are much higher. From TGA analysis it was found that PEAd and PPAd have lower thermal stability than poly(butylene adipate) (PBAd). The decomposition kinetic parameters of all polyesters were calculated while the activation energies were estimated using the Ozawa, Flynn and Wall (OFW) and Friedman methods. Thermal degradation of PEAd was found to be satisfactorily described by one mechanism, with activation energy 153 kJ/mol, while that of PPAd and PBAd by two mechanisms having different activation energies: the first corresponding to a small mass loss with activation energies 121 and 185 kJ/mol for PPAd and PBAd, respectively, while the second is attributed to the main decomposition mechanism, where substantial mass loss takes place, with activation energies 157 and 217 kJ/mol, respectively.     

Synthesis of multiblock hyperbranched‐linear poly(ether sulfone) copolymers

Hyperbranched poly(ether sulfone) was prepared in the presence of an oligomeric linear poly(ether sulfone) to generate multiblock hyperbranched‐linear (LxHB) copolymers. The LxHB copolymers were prepared in a two‐step, one‐pot synthesis by first polymerizing AB monomer to generate a linear block of a desired molecular weight followed by addition of the AB₂ monomer in a large excess (19:1, AB₂:AB) to generate the hyperbranched block. NMR integration analysis indicates that AB₂:AB ratio is independent of the reaction time. Because the molecular weight still increases with reaction time, these results suggest that polymer growth continues after consumption of monomer by condensation into a multiblock architecture. The LxHB poly(ether sulfone)s have better thermal stability (10% mass loss > 343 vs. 317 °C) and lower T_g (200 vs. > 250 °C) than the hyperbranched homopolymer, higher T_g than the linear homopolymer (<154 °C), while little difference in the solubility character was observed between the two polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4785–4793, 2008     

Poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s derived from a dihydroxy(imidoarylene) monomer

Novel poly(arylene ether)s, poly(arylene thioether)s, and poly(arylene sulfone)s were synthesized from the dihydroxy(imidoarylene) monomer 1 . The syntheses of poly(arylene ether)s were carried out in DMAc in the presence of anhydrous K₂CO₃ by a nucleophilic substitution reaction between the bisphenol and activated difluoro compounds. Poly(arylene thioether)s were synthesized according to the recently discovered one-pot polymerization reaction between a bis(N,N′-dimethyl-S-carbamate) and activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃. The bis(N,N′-dimethyl-S-carbamate) 3 was synthesized by the thermal rearrangement reaction of bis(N,N′-dimethylthiocarbamate) 2 , which was synthesized from 1 by a phase-transfer catalyzed reaction. The poly(arylene thioether)s were further oxidized to form poly(arylene sulfone)s, which would be very difficult, if not impossible, to synthesize by other methods. All of the polymers described have extremely high T_gs and thermal stability as determined from DSC and TGA analysis. Poly(arylene sulfone)s have the highest T_gs and they are in the range of 298–361°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1201–1208, 1998     

Kinetics and mechanism of the thermal degradation for the synthesis of poly(norbornene sulfone)s by two different polymerization methods

The recent development of sulfur dioxide (SO₂) polymerization has seen a renaissance in its chemistry, especially poly(olefin sulfone)s from the copolymerization of SO₂, and unsaturated hydrocarbons can be found to have many applications, including transient electronic packaging, drug delivery, and electron beam‐resistant materials. In this work, a type of functional poly(norbornene sulfone) was synthesized via two different polymerization methods. Aiming to understanding the effects of different polymerization methods on poly(olefin sulfone)s and gain further understanding on the kinetics of poly(olefin sulfone)s's thermal instability, we investigated their detailed thermal degradation behaviors using thermogravimetry and analyzed the resultant kinetics in accordance with three kinetic models. The results supported the conclusion that although the poly(norbornene sulfone)s obtained have different activation energy, the thermal degradation kinetics are the same and also obey the D_n type. Copyright © 2017 John Wiley & Sons, Ltd.     

Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes

A series of novel TiO2/poly(aryl ether sulfone) ultrafiltration membranes with anti-fouling and self-cleaning properties was designed and prepared. First, anti-photocatalytic degraded fluorine contained polv(aryl ether sulfone) matrix(PAES-F) was synthesized. Then the composite membranes were prepared via TiO2 nanopartides and PAES-F polymer matrix by solution blending and non-solvent induced phase inversion methods. Further, separation efficiency, fouling behavior and self-cleaning property of the composite ultrafiltration(UF) membranes were investigated by dead-end filtration experiments using a polyacn lamide solution. The composite UF membranes exhibited outstanding self-cleaning efficiency and anti-photocatalytic degraded property after exposure to simulated sunliglit irradiation.The water flux recovery ratios(FRR)of the optimal composite UF membranes could reach 74.24%, which was attributable to photocatalytic degradation of the organic contaminant by TiO2. And the retention rates of the composite UF membranes could maintain over 97%, which indicated the excellent photocatalytic degradation resistance of the fluorine contained PAES-F matrix. The novel high perfomiance composite UF membranes have a broad application prospect in water treatment.     

氧化偶联聚合的方法合成新型电活性聚醚砜及其结构表征

通过氧化偶联聚合的方法我们制备了一种新型电活性聚芳醚砜,这种聚合物主链上含有苯基封端的苯胺四聚体齐聚物单元。我们通红外、核磁和XRD对其结构进行了表征。在1.0M的硫酸水溶液介质中我们对其电活性进行了研究,聚合物展现出两对氧化还原峰。此外,我们使用TGA测试手段对其热稳定性也做了研究。在室温质子酸掺杂的条件下聚合物的导电率为1.37 × 10-7 S·cm-1。