Performance enforcement of gel polymer electrolyte for lithium ion battery with co-doping silicon dioxide and zirconium dioxide nanoparticles

In this work, we report a new method to enforce the comprehensive performances of gel polymer electrolyte (GPE) for lithium ion battery. Poly(methyl methacrylate-acrylonitrile-vinyl acetate) [P(MMA-AN-VAc)] is synthesized as polymer matrix. The physical and electrochemical performances of the matrix and the corresponding GPEs, doped with nano-SiO₂ and nano-ZrO₂ particles individually or simultaneously, are investigated by scanning electron microscopy, thermogravimetry, electrochemical impedance spectroscopy, and charge/discharge test. It is found that the membrane co-doped with 5 wt.% nano-SiO₂?+?5 wt.% nano-ZrO₂ and the corresponding GPE combine the advantages of those doped individually with 10 wt.% nano-SiO₂ or 10 wt.% nano-ZrO₂. Accordingly, the comprehensive performances of the membrane and the corresponding GPE, in terms of thermal stability, ionic conductivity, and electrochemical stability on the anode and cathode of lithium ion battery, is enforced by co-doping 5 wt.% nano-SiO₂ and 5 wt.% nano-ZrO₂.     

Influence of K<Subscript>2</Subscript>Ti<Subscript>6</Subscript>O<Subscript>13</Subscript> on dielectric and barrier properties of polymer

Polymer composite comprising polyvinylidene fluoride (PVDF) and potassium hexatitante (K₂Ti₆O₁₃) was synthesized by solution casting. The effect of K₂Ti₆O₁₃ on surface, thermal, and electrical properties of polymer composite were investigated. The addition of K₂Ti₆O₁₃ with polymer leads to thermal degradation and transition of polymer composite from semi-crystalline to amorphous phase. The optimum results of contact angle for different loading wt% of K₂Ti₆O₁₃ were directly correlated with the surface morphology. Our experimental results confirmed the incorporation of K₂Ti₆O₁₃ in polymer by SEM micrographs. The evaluated dielectric properties (ε' = 424; tan δ = 2.14 at 130 °C and 100 Hz frequency for 20 wt% loading of K₂Ti₆O₁₃) for polymer composite are higher in compared to pure polymer. The enhancement in dielectric constant and changing the surface properties of polymer composite can be used for the development of electrochemical storage device applications.     

Designing of multiwalled carbon nanotubes reinforced low density polyethylene nanocomposites for suppression of electromagnetic radiation

High aspect ratio multi-walled carbon nanotubes (MWCNTs) reinforced low density polyethylene (LDPE) composites were prepared by solvent casting followed by compression molding technique. Electromagnetic interference (EMI) shielding effectiveness (SE) of these composites was investigated in the frequency range of 12.4?C18 GHz (Ku-band) for the first time. The experimental results indicate that the EMI-SE of these composites is sensitive to the MWCNT loading. The average value of EMI-SE reaches 22.4 dB for 10 wt% MWCNT-LDPE composites, indicating the usefulness of this material for EMI shielding in the Ku-band. The main reason for improved SE has been attributed to significant improvement in the electrical conductivity of the composites by 20 orders of magnitude, i.e., from 10^?20 for pure LDPE to 0.63 S/cm for MWCNT-LDPE, which is three order of magnitude higher than the previous reports for MWCNT-LDPE composites. Differential scanning calorimetry of the MWCNT-LDPE composites showed around 37% improvement in the crystalline contents over pure LDPE samples which resulted into enhanced thermal stability of the composites. The thermal decomposition temperature of LDPE is shifted by 40 °C on addition of 5 wt% MWCNT. The studies therefore show that these composite can be used as light weight, thermally stable EMI shielding, and antistatic material.     

Influences of interfacial adhesion on gas barrier property of functionalized graphene oxide/ultra-high-molecular-weight polyethylene composites with segregated structure

The segregated graphene oxide(GO)/ultra-high-molecular-weight polyethylene (UHMWPE) composite films with various interfacial adhesion property were prepared by mechanical blending method from UHMWPE, GO, dodecyl amine (DA) functionalized graphene oxide(DA–GO) or uniform DA–GO/high density polyethylene (DA–GO/HDPE) powder. The results of XRD and XPS indicated that DA chain was successfully grafted onto GO sheets via a chemical method, which enhanced the interfacial adhesion between UHMWPE particles and GO sheets. The characterizations of POM and SEM proved that good segregated structure was only obtained in DA–GO/UHMWPE or DA–GO/HDPE/UHMWPE composite. Strong interfacial adhesion between fillers and matrix exhibits positive effect on gas barrier property. Compared to the GO/UHMWPE composite film, dramatic decrease in O₂ permeability coefficient by 42.2 and 48.1%, from 15.4 × 10^?14 to 8.9 × 10^?14 and 8.0 × 10^?14 cm³ cm cm^?2 s^?1 Pa^?1, is achieved upon the addition of only 0.5 wt% fillers, respectively. The DSC results demonstrated that the enhanced gas barrier performance was ascribed to the strong interfacial adhesion between DA–GO/HDPE and UHWMPE matrix, rather than the crystallinity of UHWMPE matrix. Additionally, the decrease in UHMWPE particle size might be conducive to improving the gas barrier property of composite films due to the formation of more isolation layers perpendicular to the film plane.     

Investigation on corrosion and wear behaviors of nanoparticles reinforced Ni-based composite alloying layer

In order to investigate the role of amorphous SiO₂ particles in corrosion and wear resistance of Ni-based metal matrix composite alloying layer, the amorphous nano-SiO₂ particles reinforced Ni-based composite alloying layer has been prepared by double glow plasma alloying on AISI 316L stainless steel surface, where Ni/amorphous nano-SiO₂ was firstly predeposited by brush plating. The composition and microstructure of the nano-SiO₂ particles reinforced Ni-based composite alloying layer were analyzed by using SEM, TEM and XRD. The results indicated that the composite alloying layer consisted of γ-phase and amorphous nano-SiO₂ particles, and under alloying temperature (1000 °C) condition, the nano-SiO₂ particles were uniformly distributed in the alloying layer and still kept the amorphous structure. The corrosion resistance of composite alloying layer was investigated by an electrochemical method in 3.5%NaCl solution. Compared with single alloying layer, the amorphous nano-SiO₂ particles slightly decreased the corrosion resistance of the Ni-Cr-Mo-Cu alloying layer. X-ray photoelectron spectroscopy (XPS) revealed that the passive films formed on the composite alloying consisted of Cr₂O₃, MoO₃, SiO₂ and metallic Ni and Mo. The dry wear test results showed that the composite alloying layer had excellent friction-reduced property, and the wear weight loss of composite alloying layer was less than 60% of that of Ni-Cr-Mo-Cu alloying layer.     

Preparation of TiO2–MWCNT core/shell heterostructures containing a single MWCNT and their electromagnetic properties

TiO₂–MWCNT core/shell heterostructures containing a single MWCNT have been successfully prepared via solvothermal method. TiO₂–MWCNT heterostructures with different morphologies and electromagnetic (EM) properties have obtained by adjusting the weight ratio of titanium dioxide (TiO₂₎ and multi-walled carbon nanotubes (MWCNT) (weight ratio: 1:1, 5:1 and 10:1). EDS spectrum and X-ray diffraction analysis reveal that the product is composed of Ti, O, and C elements, and the crystal structure of TiO₂ is tetragonal anatase phase. SEM and TEM images show that the MWCNTs are coated by a thin layer of TiO₂ crystals, and the average diameters of the needle-like TiO₂ nanocrystals are less than 100 nm. EM properties of the as-prepared TiO₂–MWCNT heterostructures are investigated in the 0.5–18.0 GHz range. The permittivity and permeability of the TiO₂–MWCNT heterostructures change obviously as the weight ratio of TiO₂ and MWCNT increases. Moreover, the typical resonance–antiresonance phenomenon can be observed in the permittivity and permeability curves.     

Effect of the particle size on the electrochemical performance of nano-Li2FeSiO4/C composites

Nano-Li₂FeSiO₄/C composites were prepared from three kinds of nano-SiO₂ (their particle sizes are 15?±?5, 30?±?5, and 50?±?5 nm, respectively) by a traditional solid-state reaction method. The as-prepared materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), elementary analyzer, Brunauer–Emmett–Teller (BET) analysis, galvanostatic charge–discharge test, and electrochemical impedance spectroscopy. XRD results reveal that nano-Li₂FeSiO₄ composites fabricated from nano-SiO₂ (smaller than 30 nm) have less impurity. SEM results indicate that the particle size of nano-Li₂FeSiO₄ composites is nearly accord with the particle size of nano-SiO₂. BET analysis indicates that the specific surface areas of LFS15, LFS30, and LFS50 are 35.10, 35.27, and 26.68 m² g, respectively, and the main pore size distribution of LFS15, LFS30, and LFS50 are 1.5, 5.5, and 10 nm, respectively. Electrochemical measurements indicate that nano-Li₂FeSiO₄ composites prepared from nano-SiO₂ of 30?±?5 nm have the best electrochemical performance among the three samples.     

Influence of Carbon Nanotubes on the Crystallization and Directional Tensile Behavior of High-Density Polyethylene Prepared by Dynamic-Packing Injection Molding

The influence of multi-walled carbon nanotubes (MWCNTs) on the crystallization and directional tensile properties of high-density polyethylene (HDPE) was studied for samples prepared by dynamic-packing injection molding (DPIM). Oscillatory shear was imposed on the gradually cooled melt during the packing solidification stage of DPIM. For the oriented composites containing 1.8 wt% MWCNTs, the tensile fracture behavior showed typical brittle features along the flow direction (FD) and perpendicular direction (PD), which were almost the same as those that occurred in oriented pure HDPE. The elongation at break along both directions decreased due to the incorporation of MWNCTs in the oriented composites compared with the oriented pure HDPE. However, the tensile strength of the oriented HDPE/MWCNT composites was greatly improved along the FD due to the presence of carbon nanotubes; meanwhile, it was not weakened along the PD. In scanning electron microscopy observations, it was found that there were some oriented hybrid shish-kebab structures in a nanometre scale in the oriented HDPE/MWCNT composites, but not in its isotropic composites. This suggests that MWCNTs were involved in the shear-induced crystallization of HDPE. Differential scanning calorimetry measurements confirmed that the crystallinity of oriented HDPE composites with 1.8 wt% MWCNTs was higher than those of isotropic HDPE and isotropic composites, but was not obviously higher than that of oriented pure HDPE. These findings demonstrate that MWCNTs indeed affected the formation of crystalline structures, but did not greatly influence the crystallinity of HDPE under shear flow. The transition of crystalline morphology might be the reason for change in tensile behavior for the oriented HDPE/MWCNT composites compared with the oriented pure HDPE.     

Preparation and Properties of Polylactide/Poly(ethylene-co-octene)/nano-SiO2 Ternary Composites

Polylactide (PLA)/poly(ethylene-co-octene)(POE) blends with various contents of nano-SiO₂ were prepared via melt mixing. The structure and properties of the PLA/POE/nano-SiO₂ ternary composites were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), rheometry, and tensile testing. The particle size of the dispersed POE phase first decreased with increasing nano-SiO₂ content and then remained constant. Nano-SiO₂ played an important role in the heterogeneous nucleation of PLA, which resulted in an increase of the crystallinity of PLA. The synergistic effect of both POE and nano-SiO₂ can significantly improve the toughness, strength, and modulus of PLA. When the ratio of PLA/POE/nano-SiO₂ was 90/10/0.5, PLA/POE/nano-SiO₂ composite had the best comprehensive properties.     

Lithium garnet oxide dispersed polymer composite membrane for rechargeable lithium batteries

Free-standing composite polymer membranes comprising of high molecular weight poly (ethylene oxide) (PEO) complexed with lithium perchlorate (LiClO₄) and Li₆La₂BaTa₂O₁₂ (LLBTO) garnet oxide as filler were developed via standard solution-casting method. The as-synthesized composite membranes were investigated through powder x-ray diffraction (PXRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and impedance spectroscopy techniques for their phase, thermal, morphological, and electrical properties, respectively. The lithium ion conductivity of polymer composite membranes consisting of PEO₈/LiClO₄ with various weight percents (5, 10, 15, 20, 25, and 30) of LLBTO were evaluated. We demonstrated a significant enhancement in Li⁺ conductivity with the addition of LLBTO to the polymer-lithium salt complex. Among the investigated membranes, the composite containing 20 LLBTO wt% garnet oxide exhibits maximized room temperature (30 °C) Li⁺ conductivity of 2.03 × 10^?4 S cm^?1 and electrochemical stability greater than 4.5 V.     

Preparation and performance of the polyethylene-supported polyvinylidene fluoride/cellulose acetate butyrate/nano-SiO<Subscript>2</Subscript> particles blended gel polymer electrolyte

The preparation of polyethylene-supported poly(vinylidene fluoride)/cellulose acetate butyrate/nano-SiO₂ particle (PVDF-CAB-SiO₂/PE) blended gel polymer electrolytes (GPEs) is reported here. The electrolyte uptake, mechanical properties, thermal stability, and electrochemical performance of these electrolytes are characterized to evaluate their potential application in lithium-ion batteries (LIBs). The results indicate that the particle size of SiO₂ can be adjusted by the tetraethyl orthosilicate (TEOS) concentration and affects the physicochemical properties of the membrane. By doping 5 wt.% SiO₂ (500 nm) into the PVdF-CAB blended polymer, the porosity of the membrane increases from 40 to 42.3 %, the mechanical strength from 117.3 to 138.7 MPa, the electrolyte uptake from 149 to 195 %, the oxidation decomposition potential from 4.7 to 5.2 V, and the ionic conductivity of the corresponding GPE is improved from 1.16 to 2.98 mS cm^?1 at ambient temperature. The PVDF-CAB-SiO₂/PE-based GPE and the two electrodes are suitably compatible, and the thermal stability is higher than that of the polyethylene (PE) membrane. The LIBs with the as-prepared GPE also exhibit enhanced discharge capacity and cycle stability, indicating the promising application of these GPEs in LIBs.     

Synthesis and characterization of polyurethane/SiO2 nanocomposites

In order to achieve good dispersion of nano-SiO₂ and increase the interactions between nano-SiO₂ and PU matrix, nano-SiO₂ was firstly modified with poly(propylene glycol) phosphate ester (PPG-P) which was a new polymeric surfactant synthesized through the esterification of poly(propylene glycol) (PPG) and polyphosphoric acid (PPA). Then a series of polyurethane (PU)/SiO₂ nanocomposites were prepared via in situ polymerization. The surface modification of nano-SiO₂, the microstructure and the properties of nanocomposites were investigated by FTIR, SEM, XRD and TGA. It was found that good dispersion of nano-SiO₂ achieved in PU/SiO₂ nanocomposite after the modification with PPG-P. The segmented structures of PU were not interfered by the presence of nano-SiO₂ in these nanocomposites.     

Preparation and characterization of zirconium sulfophenyl phosphate-doped sulfonated poly(phthalazinone ether sulfone) composite proton exchange membrane

Polymer composite membranes based on sulfonated poly(phthalazinone ether sulfone) (SPPES) and zirconium sulfophenyl phosphate (ZrSPP) were prepared. Three ZrSPP concentrations were used: 10, 20, and 30 wt%. The membranes were characterized by infrared spectroscopy (IR), X-ray diffraction spectroscopy, thermal gravimetric analysis, and scanning electron microscopy (SEM). The IR results indicated the formation of intense hydrogen bonds between ZrSPP and SPPES molecules. The SEM micrographs showed that ZrSPP well dispersed with SPPES and form a lattice structure. The proton conductivity of the SPPES (degree of sulfonation (DS) 64 %)/ZrSPP (10 wt%) composite membrane reached 0.39 S/cm at 120 °C 100 % relative humidity and that of the 30 wt% of SPPES (DS 16.1 %)/ZrSPP composite membrane reached 0.18 S/cm at 150 °C. The methanol permeabilities of the SPPES/ZrSPP composite membranes were in the range of 2.1?×?10^?8 to 0.13?×?10^?8?cm²/s, much lower than that of Nafion®117 (10^?6?cm²/s). The composite membranes exhibited good thermal stabilities, proton conductivities, and good methanol resistance properties.     

Addition of multiwalled carbon nanotube and graphene nanosheet in cobalt oxide film for enhancement of capacitance in electrochemical capacitors

In order to enhance the capacitance of electrochemical capacitors, multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets (GNS) were added to cobalt oxide (Co₃O₄) paste. The composite film based on Co₃O₄/MWCNT/GNS (95:4:1 wt%) exhibited a capacitance of 294 F/g while the capacitance of Co₃O₄/MWCNT (95:5 wt%) and pure Co₃O₄ film is 205 and 163 F/g, respectively. The enhanced capacitance of Co₃O₄/MWCNT/GNS composite film was attributed to the electrochemical contributions of the Co₃O₄ nanoparticle attached to the GNS as well as their significantly increased specific surface areas by MWCNTs. Furthermore, the composite films showed faradaic redox capacitive behavior to double-layer capacitive behavior due to the different nanostructures of the composites.     

Synthesis of plate-like Li<Subscript>3</Subscript>PS<Subscript>4</Subscript> solid electrolyte via liquid-phase shaking for all-solid-state lithium batteries

The precursor of plate-like Li₃PS₄ solid electrolyte (75Li₂S?25P₂S₅, SE (LS)), about 3 μm in length, 500 nm in width, and 100–200 nm in thickness, was successfully prepared from Li₂S and P₂S₅ using ethyl propionate (EP) as a synthetic medium via liquid-phase shaking. Upon evacuating at 170 °C, the precursor decomposed to SE (LS), which exhibited ionic conductivity of about 2.0 × 10^?4 Scm^?1 at room temperature. SEM observation revealed that the SE (LS) thus obtained had plate-like morphology with dimension of 3 μm in length, 500 nm in width, and 100–200 nm in thickness. Owing to the nanosized SE (LS), an all-solid-state half-cell using composite anode consisting of 90 wt% LiNi_1/3Mn_1/3Co_1/3O₂ (NMC) and 10 wt% SE (LS) delivered a high capacity up to 130 mAhg^?1(NMC) at the first discharge.     

Fabrication and electrochemical performance of La<Subscript>0.5</Subscript>Sr<Subscript>0.5</Subscript>CoO<Subscript>3</Subscript> impregnated porous YSZ cathode

La_0.5Sr_0.5CoO₃-yttria-stabilized zirconia (LSCO-YSZ) composite cathode for solid oxide fuel cell (SOFC) has been fabricated by wet impregnation method. Nitrate precursors of La, Sr, and Co have been impregnated into the pre-sintered porous YSZ matrix, which is converted into LSCO phase after calcination at 850 °C in the presence of glycine as confirmed from X-ray diffraction. LSCO of 5, 7, and 10 wt% impregnated porous YSZ have been electrochemically characterized using 2-probe AC conductivity method. Maximum ionic conductivity of 0.27 S/cm at 800 °C and activation energy of 0.15 eV between 600 and 800 °C have been observed for 10 wt% LSCO-YSZ cathode. Area-specific resistance of 1.01 Ω cm² at 800 °C is estimated for the electrolyte-supported half-cell (10 wt% LSCO-YSZ/YSZ). After testing the LSCO-YSZ cathode matrix, the electrolyte-supported full cell (10 wt% LSCO-YSZ/YSZ/NiO-YSZ) has been tested and produced maximum power density 51.12 mW/cm² (109.38 mA/cm²) at 800 °C. The electrolyte-supported full cell exhibited 6 Ω cm² electrode polarization at 800 °C in H₂, which is in higher side leading to low performance. LSCO-YSZ/YSZ/NiO-YSZ SOFC found to give stable performance up to 2 h and scanning electron microscopy analysis has been carried out before and after cell testing to assess the morphological changes.     

Facile synthesis of a sulfur/multiwalled carbon nanotube nanocomposite cathode with core–shell structure for lithium rechargeable batteries

A novel sulfur/multiwalled carbon nanotube nanocomposite (S/MWCNT) was prepared by a facile quasi-emulsion template method in an O/W system. Transmission and scanning electronic microscopy show the formation of a highly developed core–shell tubular structure consisting of S/MWCNT composite with uniform sulfur coating on its surface. The homogenous dispersion and integration of MWCNT in the S/MWCNT composite create a highly conductive and mechanically flexible framework, enhancing the electronic conductivity and consequently the rate capability of the material. The S/MWCNT composite cathode could deliver a stable discharge (the fifth cycle) capacity of about 903 mAh g^?1 at 0.1 C, 751 mAh g^?1 at 0.5 C, and 631 mAh g^?1 at 1 C.     

Fabricating and improving properties of copper matrix nanocomposites by electroless copper-coated MWCNTs

In this study, copper (Cu) nanocomposites reinforced by coated multiwall carbon nanotubes (MWCNTs) have been fabricated with different weight fractions of MWCNT. In the first step, the as-received MWCNTs were coated with Cu using electroless deposition process. In the next step, combination of sonication and ball milling (with two milling time of 1.5 and 3 h) was used for preparing MWCNT/Cu composite powders. Finally, the disk-shaped specimens were sintered by hot-press sintering machine. Characterization of sintered nanocomposites revealed that increasing milling time led to improved mechanical properties, but higher defect density on the MWCNT sidewalls is obtained which is especially undesirable for electrical properties of nanocomposite. Our results indicated that simultaneous improvements of interface reactions and distribution uniformity of MWCNTs and Cu are key factors for obtaining enhanced mechanical properties. Accordingly, enhancement of up to ~150 and ~86 % in microhardness compared to pure Cu and 1 wt% as-received MWCNT/Cu was achieved by addition of 1 wt% Cu-coated MWCNT. On the contrary, existence of oxygen atoms in the Cu and coated MWCNT interface (from functional groups and deposited copper oxide) obstructs considerable improvement of electrical resistivity compared to as-received MWCNT/Cu nanocomposites.     

Spectroscopic Investigation of Tungsten Ions in Lead Scandium Phosphate Glass System

Lead scandium phosphate glasses (PbO-Sc₂O₃-P₂O₅) containing different concentrations of tungsten oxide (WO₃) ranging from 0 to 5 mol% were prepared. A number of studies, viz. differential thermal analysis (DTA), infrared spectra, optical absorption, and electron spin resonance (ESR) spectra, have been carried out. The results of DTA indicated the highest glass forming ability for the glass containing 5 mol% of WO₃. The results of spectroscopic studies have been analyzed in light of different oxidation states of tungsten ions.     

Synthesis and characterization of Li4Ti5O12/graphene composite as anode material with enhanced electrochemical performance

The use of graphene as a conductive additive to enhance the rate capability and cycle stability of Li₄Ti₅O₁₂ electrode material has been demonstrated. Li₄Ti₅O₁₂ and its composite with graphene (1.86 wt%) are prepared by ball milling and simple chemical method, respectively. Among the as-synthesized composites, Li₄Ti₅O₁₂ particles uniformly clung to the graphene sheets. When used as an electrode material for lithium ion battery, the composite presents excellent rate performance and high cyclic stability. It is found that the composite displayed high-rate capacity of 118.7 mAh?g^?1 at 20 C. Furthermore, the composite exhibits good cycle stability, retaining over 96 % of its initial capacity after 50 cycles at 10 C. The excellent electrochemical performance is attributed to a decrease in the charge-transfer resistance.