Layer-by-layer engineered Co-Al hydroxide nanosheets/graphene multilayer films as flexible electrode for supercapacitor

Multilayer films of Co-Al layered double hydroxide nanosheets (Co-Al LDH-NS) and graphene oxide (GO) were fabricated through layer-by-layer (LBL) assembly. By using a three-electrode system, the electrochemical performances of the films were investigated to evaluate their potential as electrode materials to be used in flexible supercapacitor devices. The Co-Al LDH-NS/GO multilayer films exhibited a high specific capacitance of 880 F/g and area capacitance of 70 F/m(2) under the scan rate of 5 mV/s. And the film exhibited good cycle stability over 2000 cycles. After treating the films at 200 °C in H(2) atmosphere, the specific capacitance and area capacitance were largely increased up to 1204 F/g and 90 F/m(2) due to partial reduction of GO. A flexible electrode by depositing Co-Al LDH-NS/GO multilayer film onto PET substrate was prepared to show the potential of Co-Al LDH-NS/GO films for flexible energy storage.     

Effects of Precursors and Carbon Nanotubes on Electrochemical Properties of Electrospun Nickel Oxide Nanofibers-Based Supercapacitors

Supercapacitors have been considered as one of the main energy storage devices. Recently, electrospun nanofibers have served as promising supercapacitor electrodes because of their high surface area, high porosity, flexibility, and resistance to aggregation. Here, we investigate the effects of electrospinning parameters and nickel precursors on the nanostructure of electrospun nickel oxide (NiO), as well as on their electrochemical performance as supercapacitor electrodes. In contrast to the case of using nickel nitrate, increasing the nickel acetate molar concentration maintains the flexible fibrous sheet morphology of the as-spun sample during the polycondensation and calcination of NiO. As a result, our flexible electrode of NiO nanofibers derived from nickel acetate (NiO-A) exhibits much better electrochemical performance values than that of nickel nitrate-derived NiO. To further improve the electrochemical storage performance, we combined NiO-A nanofibers with single-walled carbon nanotubes (CNTs) as a hybrid electrode. In both half-cell and full-cell configurations, the hybrid electrode displayed a higher and steadier areal capacitance than the NiO-A nanofibers because of the synergetic effect between the NiO-A nanofibers and CNTs. Altogether, this work demonstrates the potency of the hybrid electrodes combined with the electrospun NiO-A nanofibers and CNTs for supercapacitor applications.     

Anisotropic Boron–Carbon Hetero-Nanosheets for Ultrahigh Energy Density Supercapacitors

A 2D boron nanosheet that exhibits high theoretical capacitance, around four times that of graphene, is a significant supercapacitor electrode. However, its bulk structure with low interlaminar conduction and porosity restricts the charge transfer, ion diffusion, and energy density. Herein, we develop a new 2D hetero-nanosheet made of anisotropic boron–carbon nanosheets (ABCNs) by B−C chemical bonds via gas-phase exfoliation and condensation bottom-up strategy. The ABCNs are constructed into high flexible supercapacitor electrode by microfluidic electrospinning. The ABCN electrode greatly promotes smooth migration and excessive storage of electrolyte ions due to large interlayer conductivity, ionic pathways, and accessible surfaces. The flexible supercapacitor delivers ultrahigh volumetric energy density of 167.05 mWh cm⁻³ and capacitance of 534.5 F cm⁻³. A wearable energy-sensor system is designed to stably monitor physiological signals.     

Design and Preparation of Graphene/Fe2O3 Nanocomposite as Negative Material for Supercapacitor

The development of high specific capacitance electrode materials with high efficiency, scalability and economic feasibility is significant for the application of supercapacitors, however, the synthesis of electrode material still faces huge challenges. Herein, graphene(G)/Fe₂O₃ nanocomposite was prepared via a simple hydrothermal method connected with subsequent thermal reduction process. Scanning electron microscopy(SEM) and transmission electron microscopy(TEM) results showed rod-like Fe₂O₃ nanoparticles were prepared and well-dispersed on graphene layers, providing a rich active site and effectively buffering the aggregation of Fe₂O₃ nanoparticles in the process of electrochemical reaction. The specific capacitance of the obtained G/Fe₂O₃ nanocomposite as negative electrode for supercapacitor was 378.7 F/g at the current density of 1.5 A/g, and the specific capacitance retention was 88.76% after 3000 cycles. Furthermore, the asymmetric supercapacitor(ASC) was fabricated with G/Fe₂O₃ nanocomposite as negative electrode, graphene as positive electrode, which achieved a high energy density of 64.09 W∙h/kg at a power density of 800.01 W/kg, maintained 30.07 W∙h/kg at a power density of 8004.89 W/kg, and retained its initial capacitance by 78.04% after 3000 cycles. The excellent result offered a promising way for the G/Fe₂O₃ nanocomposite to be applied in high energy density storage systems.     

Electrodeposited NiSe_2 on carbon fiber cloth as a flexible electrode for high-performance supercapacitors

A flexible electrode of nickel diselenide/carbon fiber cloth(NiSe_2/CFC) is fabricated at room temperature by a simple and efficient electrodeposition method. Owing to NiSe_2 character of nanostructure and high conductivity, the as-synthesized electrodes possess perfect pseudocapacitive property with high specific capacitance and excellent rate capability. In three-electrode system, the electrode specific capacitance of the NiSe_2/CFC electrode varies from 1058 F g~(-1) to 996.3 F g~(-1) at 2 A g~(-1) to 10 A g~(-1) respectively, which shows great rate capability. Moreover, the NiSe_2 electrode is assembled with an active carbon(AC) electrode to form an asymmetric supercapacitor with an extended potential window of 1.6 V. The asymmetric supercapacitor possesses an excellent energy density 32.7 Wh kg~(-1) with a power density 800 W kg~(-1) at the current density of 1 A g~(-1). The nanosheet array on carbon fiber cloth with high flexibility, specific capacitance and rate capacitance render the NiSe_2 to be regarded as the promising material for the high performance superconductor.     

萘基相互连接的多孔碳纳米囊的制备及超电容性能

以萘为碳源, 采用MgO模板诱导耦合KOH裁剪技术制备了相互连接的多孔碳纳米囊(ICNC). 结果表明所制备的ICNC₂具有大的比表面积(1811 m²/g)、 高的压实密度(1.38 g/cm³)和微孔孔容含量(58.93%). 在对称的超级电容器(SC)中, ICNC₂电极的体积比容在不同电流密度下分别高达420.8 F/cm³(0.069 A/cm³)和315 F/cm³(27.6 A/cm³), 容量保持率为74.82%. 在38 W/L功率密度下, ICNC₂基SC的体积能量密度为14.6 W?h/L. 经过20000次循环后, 其体积比容仅衰减1.4%, 库伦效率为99.1%, 为从萘基小分子制备储能用功能碳材料提供了一种可行的方法.     

Facile SILAR Processed Bi2S3:PbS Solid Solution on MWCNTs for High‐performance Electrochemical Supercapacitor

Carbon based composite materials have gained much attention because of fulfilling desirable properties for supercapacitor application. In the featured work, the thin film of Bi₂S₃:PbS solid solution has been synthesized on multi‐walled carbon nanotubes (MWCNTs) by simple successive ionic layer adsorption and reaction (SILAR) method. The nanoparticle morphology provides sufficient electroactive channels for electrolyte ions to penetrate during electrochemical activities. The composite exhibits superior specific capacitance 676 F/g at constant specific current density of 5.56 A/g with fast charge‐discharge cycles. In association of energy storage characteristics, the fabricated symmetric cell exhibits excellent energy density of 13.36 Wh/kg by acquiring power density of 0.83 kW/kg. The superior results of the hybrid electrode promise a novel direction for high performance supercapacitor application.     

碳海绵上电化学沉积Fe_2O_3纳米片及其增强电容性能

设计高性能的可压缩电极是实现可压缩电容器器件的关键,碳海绵(CS)具有理想的压缩形变,但却受制于有限的容量。本工作以CS为可压缩基底,通过恒电流沉积及低温热处理技术,在CS骨架上均匀沉积了α-Fe_2O_3纳米片。复合电极中Fe_2O_3的负载量随沉积时间的延长逐渐增加,且在沉积16 h后达到饱和。系统地考察了CS-Fe_2O_3复合电极在不同压力下的可压缩性能,并在三电极体系中,通过循环伏安、恒电流充放电等方法研究了CS-Fe_2O_3复合电极在3.0mol·L~(-1)KOH电解液中的电容性能。结果表明,当复合电极CS-Fe_2O_3压缩率减小时,电极的内阻增大,比电容相应减小。CSFe_2O_3-12电极在电流密度为1 A·g~(-1)时的最大比电容为294 F·g~(-1),且经过10000次恒电流充放电后,电容量仍然能保持初始值的81%,是一种潜在的电化学性能稳定的可压缩超级电容器电极材料。     

In Situ Growth of Hierarchical Ni-Mn-O Solid Solution on a Flexible and Porous Ni Electrode for High-Performance All-Solid-State Asymmetric Supercapacitors

To endow all-solid-state asymmetric supercapacitors with high energy density, cycling stability, and flexibility, we design a binder-free supercapacitor electrode by in situ growth of well-distributed broccoli-like Ni_0.75Mn_0.25O/C solid solution arrays on a flexible and three-dimensional Ni current collector (3D-Ni). The electrode consists of a bottom layer of compressed but still porous Ni foam with excellent flexibility and high electrical conductivity, an intermediate layer of interconnected Ni nanoparticles providing a large specific surface area for loading of active substances, and a top layer of vertically aligned mesoporous nanosheets of a Ni_0.75Mn_0.25O/C solid solution. The resultant 3D-Ni/Ni_0.75Mn_0.25O/C cathode exhibits a specific capacitance of 1657.6 mF cm⁻² at 1 mA cm⁻² and shows no degradation of the capacitance after 10 000 cycles at 3 mA cm⁻². The assembled 3D-Ni/Ni_0.75Mn_0.25O/C//activated carbon asymmetric supercapacitor has a high specific capacitance of 797.7 mF cm⁻² at 2 mA cm⁻² and an excellent cycling stability with 85.3 % of capacitance retention after 10 000 cycles at a current density of 3 mA cm⁻². The energy density and power density of the asymmetric supercapacitor are up to 6.6 mW h cm⁻³ and 40.8 mW cm⁻³, respectively, indicating a fairly promising future of the flexible 3D-Ni/Ni_0.75Mn_0.25O/C electrode for efficient energy storage applications.     

Electrochemical capacitance performance of polypyrrole–titania nanotube hybrid

In this study, the polypyrrole–titania nanotube hybrid has been synthesized for an electrochemical supercapacitor application. The highly ordered and independent titania nanotube array is fabricated by an electro-oxidation of titanium sheet through an electrochemical anodization process in an aqueous solution containing ammonium fluoride, phosphoric acid and ethylene glycol. The polypyrrole–titania nanotube hybrid is then prepared by electrodepositing the conducting polypyrrole into well-aligned titania nanotubes through a normal pulse voltammetry deposition process in an organic acetonitrile solution containing pyrrole monomer and lithium perchlorate. The morphology and microstructure of polypyrrole–titania nanotube hybrid are characterized by scanning electron microscopy, infrared spectroscopy and Raman spectroscopy. The electrochemical capacitance performance is determined by cyclic voltammetry and charge/discharge measurement. It indicates that the polypyrrole film can been uniformly deposited on both surfaces of titania nanotube walls, demonstrating a heterogeneous coaxial nanotube structure. The specific capacitance of polypyrrole–titania nanotube hybrid is determined to be 179?F?g^?1 based on the polypyrrole mass. The specific energy and specific power are 7.8?Wh?kg^?1 and 2.8?kW?kg^?1 at a constant charge/discharge current of 1.85?mA?cm^?2, respectively. The retained specific capacitance still keeps 85% of the initial capacity even after 200 cycle numbers. This result demonstrates the satisfying stability and durability of PPy–TiO₂ nanotube hybrid electrode in a cyclic charge/discharge process. Such a composite electrode material with highly ordered and coaxial nanotube hybrid structure can contribute high energy storage for supercapacitor applications.     

Highly super capacitive electrodes made of graphene/poly(pyrrole)

We report on the development and characterization of high performance supercapacitor electrodes synthesized using electrophoretic deposition of graphene, upon which the poly(pyrrole)-layer was electropolymerised. The highly capacitive electrode had a specific capacitance of 1510 F g(-1), area capacitance of 151 mF cm(-2) and volume capacitance of 151 F cm(-3) at 10 mV s(-1).     

Porous and free-standing Ti_3C_2T_x-RGO film with ultrahigh gravimetric capacitance for supercapacitors

MXene-based electrode materials exhibit favorable supercapacitor performance in sulfuric acid due to praised pseudocapacitance charge storage mechanism.However,self-stacking of conventional MXene electrodes severely restricts their electrochemical performance,especially at high loading.Herein,a flexible cross-linked porous Ti_3C_2T_x-MXene-reduced graphene oxide(Ti_3C_2T_x-RGO) film is skillfully designed and synthesized by microscopic explosion of graphene oxide(GO) at sudden high te mperature.The generated chamber structure between layers could hold a few of electrolyte,leading to a close-fitting reaction at interlayer and avoiding complex ions transmission paths.The Ti_3C_2T_x-RGO film displayed a preferable rate performance than that of pure Ti_3C_2T_x film and a high capacitance of 505 F/g at 2 mV/s.Furthermore,the uniform intralayer structure and unique energy storage process lead to thicknessindependenct electrochemical performances.This work provides a simple and feasible improvement approach for the design of MXene-based electrodes,which can be spread other electrochemical systems limited by ions transport,such as metal ions batteries and catalysis.     

CoNi2S4上电沉积NiS用于柔性固态非对称超级电容器

采用一种在CoNi2S4上电沉积NiS的有效方法来改善钴/镍硫化物的性能。CoNi2S4@NiS电极材料在1 A·g^-1时比电容达到1433 F·g^-1,并具有很好的倍率性能。CoNi2S4@NiS和还原氧化石墨烯组装成的柔性固态非对称超级电容器的能量密度在功率密度为800 W·kg^-1时达到36.6 Wh·kg^-1,并且在10000次充放电后表现出良好的循环性能,循环保持率达87.8%。     

Polyaniline‐Intercalated Molybdenum Oxide Nanocomposites: Simultaneous Synthesis and their Enhanced Application for Supercapacitor

A new and universal synthetic strategy to hybridize metal oxides and conduct polymer nanocomposites has been proposed in this work. The simultaneous reaction process, which includes the generation of metal oxide layers, the oxidation polymerization of monomers, and the in situ formation of polymer–metal oxides sandwich structure is successfully realized and results in the unique hybrid polyaniline (PANI)‐intercalated molybdenum oxide nanocomposites. The peroxomolybdate proved to play a dual role as the precursor of the inorganic hosts and the oxidizing agent for polymerization. The as‐obtained hybrid nanocomposites present a flexible lamellar structure by oriented assembly of conductive PANI chains in the MoO₃ interlayer, and thus inherit excellent electrical performance and possess the potential of active electrode materials for electrochemical energy storage. Such uniform lamellar structure together with the anticipated high conductivity of the hybrid PANI/MoO₃ nanocomposites afford high specific capacitance and good stability during the charge–discharge cycling for supercapacitor application.     

Carbon Nanotube Fibers Decorated with MnO2 for Wire-Shaped Supercapacitor

Fibers made from CNTs (CNT fibers) have the potential to form high-strength, lightweight materials with superior electrical conductivity. CNT fibers have attracted great attention in relation to various applications, in particular as conductive electrodes in energy applications, such as capacitors, lithium-ion batteries, and solar cells. Among these, wire-shaped supercapacitors demonstrate various advantages for use in lightweight and wearable electronics. However, making electrodes with uniform structures and desirable electrochemical performances still remains a challenge. In this study, dry-spun CNT fibers from CNT carpets were homogeneously loaded with MnO₂ nanoflakes through the treatment of KMnO₄. These functionalized fibers were systematically characterized in terms of their morphology, surface and mechanical properties, and electrochemical performance. The resulting MnO₂–CNT fiber electrode showed high specific capacitance (231.3 F/g) in a Na₂SO₄ electrolyte, 23 times higher than the specific capacitance of the bare CNT fibers. The symmetric wire-shaped supercapacitor composed of CNT–MnO₂ fiber electrodes and a PVA/H₃PO₄ electrolyte possesses an energy density of 86 nWh/cm and good cycling performance. Combined with its light weight and high flexibility, this CNT-based wire-shaped supercapacitor shows promise for applications in flexible and wearable energy storage devices.     

Electrochemical Investigation of Activated Carbon Electrode Supercapacitors

Supercapacitors, also called as ultracapacitors, are electrochemical energy-storage devices that exploit the electrostatic interaction between high-surface-area nanoporous electrodes and electrolyte ions, combining properties of conventional batteries and conventional capacitors. A symmetrical activated carbon (AC) electrode supercapacitor has been fabricated in a simple and inexpensive manner. The AC has been synthesized from Charcoal, has activated in a furnace at high temperatures. The electrode was fabricated by casting slurry made of AC and blended in a polymer solution on the counter electrode (current collector), appeared to have high mechanical strength. The electrochemical performance of the prepared samples was tested in 1 M KCl solution by cyclic voltammetry (CV), galvanostatic charge discharge technique, and impedance spectroscopy. The surface and cross-section of electrode was observed with SEM. Capacitance of fabricated supercapacitor has a favorable capacitance in the range of 65–70 F/g with low resistance. The AC electrode supercapacitor has excellent electro chemical reversibility, good cycle stability with a low fading rate of specific capacitance even after 500 cycles, which is promising for energy storage applications.     

静电纺氧化锰复合碳纳米纤维柔性膜的电化学性能

采用一步法静电纺丝技术制备了具有超亲水特性的氧化锰/碳纳米纤维(MnO_x/CNFs)复合柔性膜电极材料,并通过X射线衍射、扫描电子显微镜和透射电子显微镜等对复合材料进行了表征.电化学性能测试结果表明,复合材料的电容性能优于单一材料,醋酸锰质量分数为40%时制得的复合纳米纤维电极(MC-4)在1 A/g电流密度下,于2 mol/L KOH电解液中的比电容高达1112.5 F/g,10 A/g电流密度下循环3000次比容量保持在93.4%,具有很好的稳定性.MnO_x/CNFs复合材料电化学性能增强一方面是由于三维超亲水纤维膜结构有利于电解液的快速浸润渗透,从而极大缩短了传输到材料基质的有效路径;另一方面是由于碳和MnO_x的协同效应,包裹在MnO_x粒子周围的碳层避免了MnO_x在充放电过程中的体积膨胀效应,这2种叠加机制促进了电化学性能的提升.     

Boosting the Energy Density of Flexible Asymmetric Supercapacitor with Three Dimensional Fe2O3 Composite Brush Anode

Flexible asymmetric supercapacitor is fabricated with three dimensional(3D)Fe2O3/Ni(OH)2 composite brush anode and Ni(OH)2/MoO2 honeycomb cathode.Particularly for 3D composite brush anode,a layer of thin Fe2O3 film is firmly adhered on a 3D Ni brush current collector with the assist of Ni(OH)2,functioning as both adherence layer and pseudocapacitive active material.The unique 3D Ni brush current collector possesses large surface area and stretching architecture,which facilitate to achieve the composite anode with high gravimetric capacitance of 2158 F/g.In terms of cathode,Ni(OH)2 and MoO2 have a synergistic effect to improve the specific capacitance,and the resulting Ni(OH)2/MoO2 honeycomb cathode shows a very high gravimetric capacitance up to 3264 F/g.The asymmetric supercapacitor(ASC)has balanced cathode and anode,and exhibits an ultrahigh gravimetric capacitance of 1427 F/g and an energy density of 476 W·h/kg.The energy density of ASC is 3-4 times higher than those of other reported aqueous electrolyte-based supercapacitors and even comparable to that of commercial lithium ion batteries.The device also shows marginal capacitance degradation after 1000 cycles'bending test,demonstrating its potency in the application of flexible energy storage devices.     

基于过渡金属硫化物/还原氧化石墨烯复合物的高性能超级电容器

组装高能量密度的非对称超级电容器需要使用比电容大、 体积变化小且循环稳定性好的电极材料. 过渡金属硫化物(TMSs)与纳米碳材料的复合物是此类电极材料之一. 采用水热法合成了由Cu-Mo硫化物在微波剥离的还原氧化石墨烯表面生长的复合材料(CuS-MoS₂/MErGO). 此复合材料在电流密度为2 A/g时具有高达861.5 F/g的比电容和良好的循环稳定性. 将1.6 V的电池电压施加在由NiS/MErGO为正极, CuS-MoS₂/MErGO为负极组装成的不对称超级电容器上时, 该电容器的功率密度为1.28 kW/kg, 且能量密度保持为54.2 W·h·kg^-1. 结果表明, TMS复合材料是一种很有前途的高性能电化学储能材料, 尤其是用于非对称超级电容器的组装.     

One-pot synthesis of CoO–ZnO/rGO supported on Ni foam for high-performance hybrid supercapacitor with greatly enhanced cycling stability

The high specific capacitance along with good cycling stability are crucial for practical applications of supercapacitors,which always demands high-performance and stable electrode materials.In this work,we report a series of ternary composites of CoO-ZnO with different fractions of reduced graphene oxide(rGO) synthesized by in-situ growth on nickel foam,named as CZG-1,2 and 3,respectively.This sort of binder-free electrodes presents excellent electrochemical properties as well as large capacitance due to their low electrical resistance and high oxygen vacancies.Particularly,the sample of CZG-2(CoO-ZnO/rGO 20 mg) in a nanoreticular structure shows the best electrochemical performance with a maximum specific capacitance of 1951.8 F/g(216.9 mAh/g) at a current intensity of 1 A/g.The CZG-2-based hybrid supercapacitor delivers a high energy density up to 45.9 Wh/kg at a high power density of 800 W/kg,and kept the capacitance retention of 90.1% over 5000 charge-discharge cycles.