聚丁二酸丁二醇酯的自成核结晶行为

利用差示扫描量热仪(DSC)研究了自成核对聚丁二酸丁二醇酯(PBS)的结晶行为的影响. 研究结果表明, PBS的有效自成核温度处理区间为118～120 ℃. PBS经自成核处理后结晶温度提高, 可以在100~118 ℃温度区间内迅速结晶. 同时, 研究了自成核处理后样品在100～104 ℃范围内的等温结晶行为、动力学过程及熔融行为. 结果表明, 随着等温结晶温度的升高, 结晶速率变慢, 熔融曲线出现多重熔融峰. Hoffman-Weeks方程分析结果表明, 自成核处理对PBS的平衡熔点没有影响. Avrami等温结晶动力学方程适合分析自成核处理样品的等温结晶动力学过程, 获得其动力学参数K与n, 其中n值偏大的原因在于自成核的样品结晶生长点增多. 根据Arrhenius方程, 计算获得PBS自成核处理后等温结晶活化能为-286 kJ/mol.     

Crystallization behavior and thermal property of biodegradable poly(butylene succinate)/functional multi-walled carbon nanotubes nanocomposite

Biodegradable poly(butylene succinate) (PBSU)/functional multi-walled carbon nanotubes (f-MWNTs) nanocomposite were prepared by melt compounding. Nonisothermal crystallization and subsequent melting behavior, isothermal crystallization kinetics, spherulitic morphology, and crystal structure of neat PBSU and its nanocomposite were studied by differential scanning calorimetry, optical microscopy and wide angle X-ray diffraction in detail. The presence of f-MWNTs has a significant heterogeneous nucleation effect on the crystallization and morphology of PBSU, resulting in that the crystallization is enhanced during both nonisothermal and isothermal crystallization in the nanocomposite. Moreover, the crystal structure of PBSU is not modified by f-MWNTs in the nanocomposite. The thermogravimetric analysis illustrates an improvement in thermal stability of PBSU by around 10 °C in the presence of f-MWNTs compared with that of neat PBSU.     

生物可降解共聚物聚丁二酸/对苯二甲酸丁二醇酯(PBST)的序列结构及结晶性研究

制备了高分子量的聚丁二酸丁二醇酯,并通过与对苯二甲酸二甲酯的无规共聚调节其生物可降解性及力学性能,得到了具有优良机械性能和不同生物降解速度的一系列共聚物,并对共聚物序列结构、热力学性能、结晶性进行了研究.结果表明,该共聚物为无规共聚物,PBS和PBT分别结晶.共聚物的结晶熔点符合无规共聚物的Flory方程.     

三臂支化PLLA-PDLA嵌段共聚物的合成及立构复合结晶行为

以三羟甲基乙烷为起始剂, 开环聚合L-丙交酯(LLA), 合成三臂支化左旋聚乳酸(PLLA)预聚物. 采用端基活化技术对预聚物进行端羟基活化, 再与D-丙交酯(DLA)进行开环聚合, 合成了不同分子量的三臂支化左旋聚乳酸-右旋聚乳酸(PLLA-PDLA)嵌段共聚物. 采用核磁共振谱和凝胶渗透色谱等对样品的结构和分子量进行测试, 结果表明,合成的嵌段共聚物链结构具有链段立构规整度和高分子量的特点; 通过调节DLA单体与PLLA预聚物的投料比, 可实现对PLLA-PDLA嵌段共聚物的序列结构调控. 差示扫描量热仪和广角X 射线衍射结果表明, 三臂支化PLLA-PDLA嵌段共聚物的异构体分子间生成立构复合晶体, 其熔点高于200℃; 共聚物的嵌段序列结构对材料的凝聚态转变行为有很大的影响.     

聚丁二酸丁二酯/纳米高岭土共混体系结晶及力学性能研究

用熔融共混法制备聚丁二酸丁二酯(PBS)/纳米高岭土(nano kaolin)复合降解材料,利用FTIR、DSC、万能拉力机和SEM对其微观结构、结晶、力学性能及分散性进行研究.FTIR光谱分析结果表明,改性剂与nano kaolin发生了化学键合作用;DSC结果表明,在PBS中加入nano kaolin,提高了结晶起...     

左旋聚乳酸的结晶行为研究

用DSC, WAXD和POM对Zn催化剂制备的左旋聚乳酸(PLLA)的熔体结晶行为进行了研究. 在95~125 ℃范围内, PLLA熔体结晶生成厚度约(14±1) nm的片晶, 该片晶不易发生熔体等温增厚. 对实验数据分别用Avrami方程和Arrhenius方程进行了计算, Avrami指数n=3±0.3, 表明PLLA以球晶形式生长, 其最大结晶速率温度为(105.0±0.5) ℃, t1/2约为5.2 min. 利用Lauritzen-Hoffmann（LH）理论对PLLA结晶机理进行了分析, 发现PLLA结晶的Regime Ⅱ和Regime Ⅲ的转变温度为107 ℃. Kg(Ⅱ)和Kg(Ⅲ)分别为4.57×105 K2和1.115×106 K2, 且Kg(Ⅲ)/Kg(Ⅱ)=2.4, 与LH理论值一致.     

聚己内酯/纳米二氧化硅复合体系环带球晶形貌及结晶行为研究

采用溶液浇铸的方法制备了聚己内酯(PCL)/疏水性纳米二氧化硅(R974)复合体系薄膜,利用偏光显微镜、差示扫描量热仪、扫描电镜等研究了R974对PCL环带球晶形貌及结晶行为的影响,并从微观层次探讨了PCL/R974环带球晶可能的形成机理。结果表明,PCL/R974环带球晶是由扭转生长的片晶构成。R974的加入可诱导PCL环带球晶的形成,拓宽环带球晶形成温度。R974含量越高,PCL形成环带温度越低,环带周期越小,环带结构越规整。等温结晶时,R974加入并未改变PCL异相成核机理,但会影响其结晶动力学。当R974含量≤4%(wt)时,其异相成核作用占主导,促进了PCL结晶过程;当R974含量4%(wt)时,其对于球晶生长的阻碍大于异相成核作用,最终抑制了PCL的结晶。     

聚丁二酸丁二酯/纳米二氧化硅共混体系的结晶和动态力学性能研究

用溶液共混法制备了聚丁二酸丁二酯(PBS)/纳米二氧化硅(nano-SiO2)复合材料,并通过DSC、XRD、TEM和DMTA对其结晶、微观结构和动态力学性能进行了研究.DSC与XRD结果表明,在PBS中加入纳米SiO2,提高了PBS的结晶温度,并随着nano-SiO2含量的增加呈正相相关性,从纯PBS的67.7℃提高到含5%nano-SiO2时的73.3℃;在空气淬火条件下,提高了复合材料中PBS的结晶度,在nano-SiO2含量为2%时达到42.4%;TEM照片表明SiO2与基体PBS的界面模糊,表明二者之间具有一定的相互作用;这种相互作用和复合材料结晶性能的变化使PBS/nano-SiO2复合材料的储能模量和损耗因子均高于纯PBS.上述结果表明在PBS中添加适量的nano-SiO2,能显著提高PBS的结晶和动态力学性能.     

聚碳酸亚丙酯对聚(β-羟基丁酸酯-β-羟基戊酸酯)结晶行为的影响

用FTIR和DSC研究了PHBV及其与聚碳酸亚丙酯(PPC)熔融共混样的熔融结晶行为和等温结晶动力学.结果表明,PHBV与PPC熔融共混过程中发生了酯交换反应,两组分间存在一定的相互作用.PPC虽然能降低PHBV结晶折迭链的表面自由能,但同时也能够降低PHBV的结晶度、球晶径向生长速率、平衡熔点和结晶能力.     

基于聚乙二醇结构调控高分子量聚乳酸立构复合体系的结晶行为

设计合成了梳形聚(聚乙二醇甲醚丙烯酸酯)(PPEGA)及其与聚乙二醇(PEG)的嵌段共聚物(PEG-b-PPEGA).通过与高分子量左旋聚乳酸(PLLA)和右旋聚乳酸(PDLA)共混探究了PEG不同的结构对PLA立构复合体系(sc-PLA)结晶的影响.结果 表明线形PEGA和PEG能与sc-PLA完全相容,两者均能促进...     

Miscibility,Crystallization, and Rheological Behavior of Solution Casting Poly(3-hydroxybutyrate)/poly(ethylene succinate) Blends Probed by Differential Scanning Calorimetry,Rheology, and Optical Microscope Techniques

The miscibility and crystallization of solution casting biodegradable poly(3-hydroxybuty-rate)/poly(ethylene succinate) (PHB/PES) blends was investigated by differential scanning calorimetry, rheology, and optical microscopy. The blends showed two glass transition temperatures and a depression of melting temperature of PHB with compositions in phase diagram, which indicated that the blend was partially miscible. The morphology observation supported this result. It was found that the PHB and PES can crystallize simultaneously or upon stepwise depending on the crystallization temperatures and compositions. The spherulite growth rate of PHB increased with increasing of PES content. The influence of compositions on the spherulitic growth rate for the partially miscible polymer blends was discussed.     

Morphology and isothermal crystallization of graphene oxide reinforced biodegradable poly(butylene succinate)

Graphene oxide (GO) was incorporated into poly(butylene succinate) (PBS) via a solution coagulation method to fabricate PBS/GO nanocomposites. Scanning electron microscope and transmission electron microscope observations indicated that GO with exfoliated lamella dispersed in PBS uniformly and showed good interfacial adhesion with the PBS matrix. Differential scanning calorimetry analysis suggested that the crystallization ability of PBS first increased and then decreased with increase in GO content, due to the competitive nucleating effect and confined space effect with addition of exfoliated GO. Isothermal crystallization kinetics investigation showed that the overall crystallization rate of PBS first increased and then decreased with increasing GO content while the crystallization mechanism remained unchanged. Polarized optical microscopy analysis indicated that GO worked as an effective nucleating agent for PBS. X-ray diffraction characterization suggested that incorporation of GO did not change the crystal structure of PBS. Both tensile testing and dynamic mechanical analysis witnessed the reinforcement in mechanical performance of PBS by incorporation of GO.     

Synthesis and performances of poly(butylene-succinate) with enhanced viscosity and crystallization rate via introducing a small amount of diacetylene groups

A cross-linkable comonomer containing a diacetylene group, named dimethyl 4,4'-(buta-1,3-diyne-1,4-diyl)dibenzoate (DA) was synthesized and copolymerized with dimethyl succinate and 1,4-butanediol to prepare a series of slightly cross-linked PBS copolyesters (PBDASx). The chemical structure, crystallization and rheological behaviours of PBDASx were well investigated. Compared to neat PBS, PBDASx showed the greatly increased crystallization rate because of the promoting nucleation of the cross-linking domains, and the XRD results indicated that it had no influence on crystallization structure of PBS. The rheological behaviours indicate that PBDASx possessed higher viscosity than neat PBS even at high shear rate and temperature. PBDAS0.3 exhibited better comprehensive properties than neat PBS, which will widen applications of PBS.     

The stereocomplex formation and phase separation of PLLA/PDLA blends with different optical purities and molecular weights

In this study, the poly(L-lactide)/poly(D-lactide)(PLLA/PDLA) blends with different optical purities of PLLA and various molecular weights of PDLA are prepared by solution mixing, and the stereocomplex formation and phase separation behaviors of these blends are investigated. Results reveal that optical purity and molecular weight do not vary the crystal structure of PLA stereocomplex(sc) and homochiral crystallites(hc). As the optical purity increasing in the blends, the melting temperature of sc(Tsc) and the content of sc(ΔHsc) increased, while the melting temperature of hc(Thm) hardly changes, although the content of hc(ΔHhm) decreased gradually. The Tsc and ΔHsc are also enhanced as the molecular weight of PDLA reduces, and the ΔHhm reduces rapidly even though the Thm does not vary apparently. With lower optical purities of PLLA and higher molecular weights of PDLA, three types of crystals form in the blends, i.e., PLA sc, PLLA hc and PDLA hc. As molecular weight decreases and optical purity enhances, the crystal phase decreases to two(sc and PDLA hc), and one(sc) finally. This investigation indicates that the phase separation behavior between PLLA and PDLA in the PLLA/PDLA blends not only depends on molecular weights, but also relies on the optical purities of polymers.     

多孔二氧化硅对聚环氧乙烷结晶行为的影响

高分子化合物由于具有很长的分子链,不易进行规整排列,结晶速度通常很慢,为提高结晶速度,有时需要加入成核剂．多孔二氧化硅（ＳｉＯ２）具有较大的比表面积,故吸附作用较强,有可能作为成核剂影响部分结晶高聚物的结晶过程．聚环氧乙烷（ＰＥＯ）为部分结晶高聚物,其结晶行为对杂质较为敏感．本文目的在于通过结晶动力学及结晶与熔融行为的研究,探索多孔二氧化硅对ＰＥＯ结晶行为的影响．１　实验部分　　聚环氧乙烷（ＰＥＯ,Ｍｗ＝１×１０５）．两种多孔二氧化硅（ＳｉＯ２）按文献［１］方法制备,平均粒度为０．３μｍ,平均孔…     

结晶性芳香聚酯高压结晶行为研究进展

运用高压极限手段研究聚合物的结构、形态和性能是20世纪60年代以来兴起的一项聚合物前沿课题。本文主要结合作者自己的研究工作，重点叙述聚对苯二甲酸乙二醇酯(PET)的高压结晶行为研究，包括温度、压力、时间及分子量对PET高压结晶行为的影响，高压结晶PET的形态。以及对PET伸直链晶体结晶机理的探讨，同时简要介绍了对其它结晶性芳香聚酯诸如聚对苯二甲酸丁二醇酯(PBT)及聚对萘二甲酸乙二醇酯(PEN)的高压结晶行为研究，反映了该领域的研究概况和最新进展。并对今后的研究提出了展望。     

苯乙烯—丙烯酸钠共聚物改性PET结晶行为的研究

本文用DSC和FT-IR方法研究了PET/苯乙烯-丙烯酸钠共聚物共混体系的相溶性、等温结晶动力学、组成、温度等因素对结晶速率、结晶度等结晶行为的影响,并初步探讨了离聚物对PET的作用。     

聚醚醚酮/聚醚醚酮酮共混体系的熔融和等温结晶行为

采用熔融共混方法制备了聚醚醚酮和聚醚醚酮酮的共混物,用DSC对共混物的熔融行为和等温结晶行为进行了研究.结果表明,共混物熔点随聚醚醚酮含量增加而降低,但与聚醚醚酮酮有相同的平衡熔点,二者共混没有改变其结晶的成核与生长机制.     

Biocomposites based on poly(butylene succinate) and curaua: Mechanical and morphological properties

Biocomposites based on poly(butylene succinate) (PBS) and curaua fibers have been produced by compression molding, and investigated as a function of fiber length and amount. Mechanical tests, water uptake and morphology studies were carried out in order to assess the composite features according to the characteristics of the reinforcing agents. It turns out that the impact and flexural strengths increase with fiber content. Moreover, the fiber length, varying from 1 to 4 cm for the composite reinforced with 20 wt% of fiber, influences impact strength, which is higher for shorter than for longer fibers. However, flexural strength is not greatly influenced by the length of the fibers. Water uptake studies reveal a higher sensitivity of the material to fiber content rather than fiber size. Biocomposites, which are characterized by enhanced mechanical properties as compared to PBS, can have different applications, for example in rigid packaging or interior car parts.     

右旋聚乳酸薄膜的结晶形态

利用旋涂法制备一系列右旋聚乳酸(PDLA)均聚物薄膜, 在不同溶液浓度、结晶温度、结晶时间、溶剂和基底条件下对其进行等温结晶处理, 得到直径和长度大小不等的短棒和纤维束球状等形态, 利用原子力显微镜(AFM)研究了不同条件下所得到的PDLA薄膜的结晶形态. 提出了可能的结晶演变过程和生长模型. 通过控制不同的结晶条件, 可以得到PDLA均聚物薄膜的不同结晶形态.