Enzyme-assisted Photoinitiated Polymerization-induced Self-assembly in Continuous Flow Reactors with Oxygen Tolerance

Polymerization-induced self-assembly(PISA) is an emerging method for the preparation of block copolymer nano-objects at high concentrations. However, most PISA formulations have oxygen inhibition problems and inert atmospheres(e.g. argon, nitrogen) are usually required. Moreover, the large-scale preparation of block copolymer nano-objects at room temperature is challenging. Herein, we report an enzyme-assisted photoinitiated polymerization-induced self-assembly(photo-PISA) in continuous flow reactors with oxygen tolerance. The addition of glucose oxidase(GOx) and glucose into the reaction mixture can consume oxygen efficiently and constantly, allow the flow photoPISA to be performed under open-air conditions. Polymerization kinetics indicated that only a small amount of GOx(0.5 μmol/L) was needed to achieve the oxygen tolerance. Block copolymer nano-objects with different morphologies can be prepared by varying reaction conditions including the degree of polymerization(DP) of core-forming block, monomer concentration, reaction temperature, and solvent composition. We expect this study will provide a facile platform for the large-scale production of block copolymer nano-objects with different morphologies at room temperature.     

Control on the Morphology of ABA Amphiphilic Triblock Copolymer Micelles in Dioxane/Water Mixture Solvent

This work offers a typical understanding of the factors that govern the nanostructures of poly(4-vinyl pyridine)-b-polystyrene-bpoly(4-vinyl pyridine)(P4 VP-b-PS-b-P4 VP) block copolymers(BCs) in dioxane/water, in which water is a selective solvent for the P4 VP block. It is achieved through an investigation of the amphiphilic triblock copolymer micelles by variation of three different factors, including water content(above CWC but under the immobile concentration), temperature(ranging from 20 °C to 80 °C), and copolymer composition(low and high PS block length). Transition of bead-like micelles to vesicles is observed with the increase of water content due to the increase of interfacial energy between the copolymer and the solvent. Effect of temperature superposed on that of water content results in various morphologies, such as beads, fibers, rods, capsules, toroids, lamellae, and vesicles. The interfacial tension between the BC and the solvent increases with the increase of water content but decreases with the increase of temperature, indicating that the micellar morphologies are resulted from the competitive interplay between the temperature and the water content and always change in a direction that decreases the interfacial energy. Based on the micellar structures obtained in this work and the effects of temperature superposed on water concentration, a diagram of phase evolution of different micellar morphologies is illustrated here, covering the temperature range from 20 °C to 80 °C and the water content changing from 20 vol% to 35 vol%. For the investigation of BC composition, morphological transition of vesicle-to-fiber, for high PS length, is observed as compared with bead-to-capsule for low PS length, as the temperature changes from 20 °C to 80 °C. Our research complements the protocols to control over the morphologies and the phase diagram describing P4 VP-b-PS-b-P4 VP micellar nanostructures in aqueous solution.     

Transformation of Structure and Properties of Vesicles Induced by Transition Metal Ions

This paper proved that octodecyl propylenediamine could form vesicles in pure water and aqueous solution of CuCl2 or Cu（NO3）2. The structure and morphology of vesicles were different when the copper （Ⅱ） salt was added to the solution. The results showed that both the counterions and the ligands had strong influence on the configuration of coordinated structures and packing model in bilayer membrane of vesicles.     

Preparation of Nano-porous Materials( Ⅱ） by Cross-linking of Amphiphilic Self-assemblies

Amphiphilic block copolymers can exhibit rich and complex morphologies in aqueous solutions but these structures are usually delicate,easily disturbed by composition change or temperature change.In this work,the use of different methods to cross-link block copolymer self-assemblies in the presence of a selective solvent and to stabilize the structures is reviewed.In addition,the cross-linking reaction kinetics of block copolymer amphiphilic self-assemblies is briefly discussed.     

Effect of Monomer Feeding Mode on thePreparation of Hollow Latexes with High MAA Content in the Core Latex Preparation简

In order to prepare hollow latex particles with optimum morphology based on osmotic swelling principle, three- layer core/shell latex particles with 40 wt% MAA in the core were first prepared via multistep seeded emulsion copolymerization, in which monomers were added by a semi-continuous process with monomer addition under two different forms： pure monomers＇ mixture （monomer addition）, and pre-emulsified monomers （pre-emulsion addition）. Then, the hollow latex particles with different morphologies were obtained after alkali post-treatment. Influences of the monomer feeding mode on the emulsion polymerization and the particle morphology were investigated. Results showed that the pre- emulsion addition could significantly improve the polymerization stability in each step, and greatly enhance the uniformity of shell encapsulation. The sizes of the core and core/shell latex particles obtained by the pre-emulsion addition were smaller and more uniform than those synthesized by the monomer addition, and the hollow latex particles with intact morphology were generated by alkali post-treating of the core/shell latexes prepared from the pre-emulsion addition. As the core size increased, the morphology of the post-treated particles underwent evolution from hollow to collapse. Moreover, the mechanism of the particle morphological evolution was proposed.     

Morphology and Crystalline Structure of Inclusion Compounds Formed between Poly（ethylene glycol） and Urea

The poly（ethylene glycol） （PEG, with Mw 2000）-urea inclusion compound （IC） crystallized at high temperature region showed two typical orientations, flat-on and edge-on crystals. 2D-XRD and polarized FTIR spectroscopy revealed that the PEG chains within urea channels were perpendicular to the substrate in fiat-on oriented crystals, while PEG chain axes were parallel to the substrate and lay along the growth direction in the edge-on crystals. FT1R absorption bands of PEG in the ICs are sensitive to orientation of the crystals. A scheme of PEG chain packing in the urea IC channel was proposed, which could explain the orientation of the crystal nucleus causing the two types of morphologies. Furthermore, functioning of PEG2000 chain end with analine had significantly influence on the morphology and orientation of the inclusion compound crystals, due to the defects caused by large terminal groups included in the urea channel.     

Nucleation and crystallization of H-shaped (PS)2PEG(PS)2 block copolymers

<正>A series of H-shaped(PS)_2PEG(PS)_2 block copolymers with different PS chain lengths were prepared.The influence of different confinements active on the crystallization and self-nucleation(SN) behavior of the PEG blocks was investigated by differential scanning calorimetry(DSC).When the content of the crystalline block was high,a classical SN behavior was obtained.The block copolymer with PEG content of 49%(by weight) showed a classical SN behavior with a narrow self-nucleation domain and had bimodal crystallization exotherms.When the PEG dispersed as separated microdomains in the block copolymer,the self-nucleation domain disappeared and only annealing was observed.     

Synthesis of pH-responsive amphiphilic diblock copolymers containing polyisobutylene via oxyanion-initiated polymerization and their multiple self-assembly morphologies

 Two pH-responsive amphiphilic diblock copolymers, namely polyisobutylene-block-poly[2-(N,N-dimethylamino)ethyl methacrylate] (PIB-b-PDMAEMA) and polyisobutylene-block-poly(metharylic acid) (PIB-b-PMAA), were synthesized via oxyanion-initiated polymerization, and their multiple self-assembly behaviors have been studied. An exo-olefin-terminated highly reactive polyisobutylene (HRPIB) was first changed to hydroxyl-terminated PIB (PIB-OH) via hydroboration-oxidation of C＝C double bond in the chain end, and then reacted with KH to yield a potassium alcoholate of PIB (PIB-O^-K⁺). PIB-O^-K⁺ was immediately used as a macroinitiator to polymerize DMAEMA monomer, resulting in a cationic diblock copolymer PIB-b-PDMAEMA. With the similar synthesis procedure, the anionic diblock copolymer PIB-b-PMAA could be prepared via a combination of oxyanion-initiated polymerization of tert-butyl methacrylate (tBMA) and subsequent hydrolysis of tert-butyl ester groups in PtBMA block. The functional PIB and block copolymers have been fully characterized by ¹H-NMR, FT-IR spectroscopy, and gel permeation chromatography (GPC). These samples allowed us to systematically investigate the effects of block composition on the pH responsivity and various self-assembled morphologies of the copolymers in THF/water mixed solvent. Transmission electron microscopy (TEM) images revealed that these diblock copolymers containing small amount of original PIB without exo-olefin-terminated group are able to self-assemble into micelles, vesicles with different particle sizes and cylindrical aggregates, depending on various factors including block copolymer composition, solvent polarity and pH value.     

Synthesis and Characterization of PEG-scuteilarin Conjugates, a Potential PEG Ester Prodrug for the Oral Delivery of Scutellarin

Highly water soluble esters of scutellarin with variable molecular weight polyethylene glycol （PEG） were prepared via PEGylation. The physicochemical properties and the stabilities under different conditions were investigated. By PEG modification, the greatly increased water solubility and desirable partition coefficient of scuteUarin were obtained, and the results showed that these conjugates were potential prodrugs for the oral delivery of scuteUarin.     

On the origin and regulation of ultrasound responsiveness of block copolymer nanoparticles

Noninvasive ultrasound is more convenient and easily accessible for controlled drug delivery of polymeric nanoparticles than many other stimuli.However,controlled ultrasound responsiveness is rather challenging as the mechanism is still unclear.In this article,we disclose the origin and the key regulating factors of ultrasound responsiveness of block copolymer nanoparticles such as simple vesicles,framboidal vesicles,lamellae,beads-like micelles and complex micelles that are self-assembled from a range of poly(ethylene oxide)-b-polymethacrylates based model copolymers.We discover that the intrinsic ultrasound responsiveness of block copolymer nanoparticles thermodynamically originates from their metastable states,and its expression kinetically relates to the mobility of the hydrophobic segments of block copolymers.Specifically,the self-assembly temperature(Ts) that has been usually considered as a less important factor in most of macromolecular self-assembly systems,and the solvents for the selfassembly are two dominant regulating factors of the ultrasound responsiveness because they determine the thermodynamic state(metastable or stable) of nanoparticles.For example,simple vesicles with good or excellent ultrasound responsiveness can be prepared in THF/water when the Tsis around or slightly below the glass transition temperature(Tg) of the hydrophobic segment of the block copolymer because the combination of this solvent with this Tsfacilitates the formation of metastable vesicles.By contrast,thermodynamically stable solid nanoparticles such as spherical micelles and lamellae(mainly formed in DMF/water)are not sensitive to ultrasound at all,neither are the vesicles in THF/water at stable states when the Tsis highly above Tg.In addition,we unravel that the responsive rate is highly dependent on the sonication temperature(Tu),i.e.,the higher the Tu,the faster the rate.Overall,the above important findings provide us with a fresh insight into how to design ultrasound-responsive nanoparticles and may open new avenues for synthesizing translational noninvasively responsive drug carriers.     

KLVFF peptide functionalized nanoparticles capture Aβ42 by co-assembly for decreasing cytotoxicity

The bis(pyrene)-Lys-Leu-Val-Phe-Phe-Gly-poly ethylene glycol (BP-KLVFFG-PEG) based nanoparticles capture Aβ₄₂ by recognition and co-assembly, the length of PEG chain in which leads to different morphologies of coassemblies and capture efficiency. The co-assembly strategy shows a decrease of cytotoxicity, potentially for Alzheimer's disease treatment.     

Hierarchical Porous Polymer Beads Prepared by Polymerization-induced Phase Separation and Emulsion-template in a Microfluidic Device

Porous polymer beads（PPBs） containing hierarchical bimodal pore structure with gigapores and meso-macropores were prepared by polymerization-induced phase separation（PIPS） and emulsion-template technique in a glass capillary microfluidic device（GCMD）. Fabrication procedure involved the preparation of water-in-oil emulsion by emulsifying aqueous solution into the monomer solution that contains porogen. The emulsion was added into the GCMD to fabricate the（water-in-oil）-in-water double emulsion droplets. The flow rate of the carrier continuous phase strongly influenced the formation mechanism and size of droplets. Formation mechanism transformed from dripping to jetting and size of droplets decreased from 550 μm to 250 μm with the increase in flow rate of the carrier continuous phase. The prepared droplets were initiated for polymerization by on-line UV-irradiation to form PPBs. The meso-macropores in these beads were generated by PIPS because of the presence of porogen and gigapores obtained from the emulsion-template. The pore morphology and pore size distribution of the PPBs were investigated extensively by scanning electron microscopy and mercury intrusion porosimetry（MIP）. New pore morphology was formed at the edge of the beads different from traditional theory because of different osmolarities between the water phase of the emulsion and the carrier continuous phase. The morphology and proportion of bimodal pore structure can be tuned by changing the kind and amount of porogen.     

Fabrication of polymersomes with controllable morphologies through dewetting w/o/w double emulsion droplets

In this work, monodisperse giant polymersomes are fabricated by dewetting of water-in-oil-in-water double emulsion droplets which are assembled by amphiphilic block copolymer molecules in a microfluidic device. The dewetting process can be tuned by solvation between solvent and amphiphilic block copolymer to get polymersomes with controllable morphology. Good solvent(chloroform and toluene) hinders dewetting process of double emulsion droplets and gets acornlike polymersomes or patched polymersomes. On the other hand, poor solvent(hexane) accelerates the dewetting process and achieves complete separation of inner water phase from oil phase to form complete bilayer polymersomes. In addition, twin polymersomes with bilayer membrane structure are formed by this facile method. The formation mechanism for different polymersomes is discussed in detail.     

Synthesis and fluorescence enhancement behavior of a novel fluorescent aqueous polyurethane emulsion DDAQ-TDI-PU

A novel fluorescent aqueous polyurethane emulsion DDAQ-TDI-PU was synthesized by blocking the anthraquinone moiety of 1,4-diamino-2,3-diphenoxyanthraquinone(DDAQ) into polyurethane chain using 2,4-tolylene diisocyanate(TDI),poly(propylene glycol) and 2,2-dimethylol propionic acid.The chain structure of DDAQ-TDI-PU was confirmed by means of Fourier transform infrared spectroscopy and UV-vis analysis.Comparing to the UV-vis spectrum of DDAQ,DDAQ-TDI-PU showed a hypsochromic shift from the absorption maxima of 518,558,609 nm to 510,548,586 nm,respectively.It was found that the fluorescence intensity of DDAQ-TDI-PU emulsion was enhanced greatly comparing with that of DDAQ.The fluorescence of DDAQ-TDI-PU was very stable not only for the long term storage but also for the fluorescence quencher.     

Polyrotaxane-based triblock copolymers synthesized via ATRP of N-isopropylacrylamide initiated from the terminals of polypseudorotaxane of Br end-capped pluronic 17R4 and β-cyclodextrins

Thermo-responsive polyrotaxane (PR)-based triblock copolymers were synthesized via the atom transfer radical polymerization (ATRP) of N-isopropylacrylamide initiated with self-assemblies made from a distal 2-bromoisobutyryl end-capped Pluronic 17R4 (PPO14-PEG24-PPO14) with a varying amount of β-cyclodextrins (β-CDs) in the presence of Cu(I)Cl/PMDETA at 25 °C in aqueous solution. The molecular structure was characterized by means of H NMR, FTIR, WXRD, GPC, TGA and 1 DSC analyses. About half of β-CDs are still entrapped on the Pluronic 17R4 chain while the number of incorporated NIPAAm monomers is nearly a double feed value in the resulting copolymers. The aggregate morphologies in aqueous solution were evidenced by TEM observations. A two-step thermo-responsive transition arising from a combination of a polypseudorotaxane middle block with poly(N-isopropylacrylamide) flanking blocks was also demonstrated by turbidity measurements. Given their thermo-responsive behavior in aqueous solution, these PR-based triblock copolymers show the potential to be used as smart materials for the controlled drug delivery systems, biosensors, and the like.     

Design and synthesis of novel antifungal triazole derivatives with good activity and water solubility

In order to find novel antifungal agents with good activity and aqueous solubility,a series of SYN-2869 analogues containing a pyridine ring were synthesized and evaluated for their in vitro antifungal activity and water solubility.The results indicated that some compounds showed potent activity against six pathogenic fungi.In particular,the analogue 17a having an isobutyl substitution on the triazolone exhibited significant broad spectrum antifungal activity.In addition,the water solubility of compound 17a was sufficiently improved over SYN-2869.     

The Important Roles of Water in Protein Folding: an Approach by Single Molecule Force Spectroscopy

The single-chain elasticity of a completely unfolded protein ((I27)8,modules of human cardiac titin) is studied in different liquid environments by the atomic force microscopy (AFM)-based single molecule force spectroscopy (SMFS).The experimental results show that there is a clear deviation between the force curves obtained in the aqueous and nonaqueous environments.Such a deviation can be attributed to the additional energy consumed by the rearrangement of the bound water molecules around the chain of the completely unfolded (I27)8 chain upon stretching in aqueous solution,which is very similar to the partial dehydration process from a denatured/unfolded to a native/folded protein.Through the analysis of the free energy changes involved in protein folding,we conclude that it is due to the weak disturbance of water molecules and the special backbone structures of proteins that the self-assembly of proteins can be achieved in physiological conditions.We speculate that water is likely to be an important criterion for the selection of self-assembling macromolecules in the prebiotic chemical evolution.     

Effect of the Shell Crosslinking Level andCore/Shell Ratio on the Morphology of LatexParticles in the Preparation of Hollow Latexes简

Three-layer core/shell latex particles with various shell crosslinking level and shell thickness were prepared by multistep emulsion polymerization, and the hollow latex particles with different morphologies were then obtained after alkali post-treatment. Influences of divinyl benzene(DVB) content and the core/shell mass ratio on emulsion polymerization and particle morphology were investigated. Results showed that with the increase of DVB content, the percentage of total amount of ―COOH on the particle surface and free in aqueous phase(PSFa) decreased, and the morphology of the post-treated particles underwent evolution from cracked, intact hollow to deficient swelling structure. Decreasing the core/shell mass ratio could not only make more carboxyl groups encapsulated by the shell, but also increase the shell resistance to the swelling of the core. The uniform hollow latex particles with intact morphology were obtained when the DVB content was 3.54 wt% and the core/shell mass ratio was 1/6.     

Photoinduced Electron Transfer (PET) between C_(60) and Amines in Micelle Solution A Kinetic ESR Study

Fullerene chemistry has been one of the most exciting research subjects in the recent decade1,2. However, the predominant hydrophobic character and the spherical carbon allotrope of C60 hinder its solubility in an aqueous solution. In order to efficiently slow down charge recombination in the PET system containing C60, water was selected as optimal polar media to stabilize charge separation state. Accordingly, solubility of fullerene in water had to be achieved by incorporating it into th…     

A Simple Method for the Preparation of ZnO Prickly Spheres

The synthesis of ZnO prickly spheres using precipitation followed by heating treatment was investigated. Zn(OH)2 precursor was prepared by precipitation process using Zn(CH3COO)2-2H2O in mixed 1-propanol-water solvent. Sodium dodecyl sulfate (SDS) as the anionic surfactant was added to control the morphology. The size and structure of ZnO prickly spheres were studied using XRD, TEM and SEM. The results showed that the morphologies and size of the spheres strongly depended on the volume ratio of 1-propanol /water and molar ratio of SDS/Zn2+. ZnO prickly spheres composed of nanorods could be obtained, when the volume ratio of 1-propanol/water = 2:3 and the molar ratio of Zn2/SDS= 450:1.