荧光增白剂VBL的荧光光谱及测定方法研究

VBL是4,4'-双-( 4-羟乙胺基-2-苯胺基-1,3,5-三嗪)氨基-二苯乙烯-2,2'-二磺酸钠盐的简称,二苯乙烯三嗪类荧光增白剂的代表产品.     

一系列新的双光子聚合引发剂:合成与非线性光学性质

通过无溶剂反应,合成了四种具有D-π-D(D-供体,π-共轭体系)结构的光聚合引发剂,即4,4′-双[2-(4-N,N-二乙胺基)-苯乙烯基]联苯(BDEVB)、4,4′-双[2-(4-N,N-二丙胺基)-苯乙烯基]联苯(BDPVB)、4,4′-双[2-(4-N,N-二丁胺基)-苯乙烯基]联苯(BDBVB)和4,4′-双[2-(4-N-甲基-N-羟乙基胺基)-苯乙烯基]联苯(BMHVB),并利用1HNMR,IR和元素分析进行了表征,同时研究了它们在不同溶剂中的单光子和双光子荧光.实验结果表明:不同的电子供体使其单光子荧光和双光子吸收截面具有不同的变化趋势.     

超高效合相色谱法快速检测纺织品中的8种荧光增白剂

建立了同时检测纺织品中1,2-双(5-甲基-2-苯并恶唑基)-乙烯(PF)、7-二乙氨基-4-甲基香豆素(SWN)、2,2'-(2,5-二苯基硫代)双[5-(1,1-二甲基乙基)]苯并恶唑(OB)、2-[4-[2-[4-(2-苯并恶唑基)苯基]乙烯基]苯基]-5-甲基苯并恶唑(KSN)、1,4-双(2-氰基苯乙烯基)苯(ER-Ⅰ)、1-邻氰苯乙烯基-4-对氰苯乙烯基苯(ER-Ⅱ)、2,2-(1,4-亚萘基)双(苯并恶唑)(KCB)和4,4'-双[2-(2-甲氧基苯基)亚乙基]-1,1'-联苯(FP)8种荧光增白剂的超高效合相色谱(UPC²)检测方法。样品经二甲苯提取、浓缩、定容后,由UPC²进行定性定量分析。以超临界CO₂-甲醇为流动相,梯度洗脱,采用ACQUITY UPC² HSS C18 SB色谱柱(100 mm×3.0 mm,1.8 μm)进行分离。8种荧光增白剂在1.0~20.0 mg/L范围内线性良好(r≥0.9991),定量限(LOQ,S/N=10)在0.70~0.95 mg/L之间。不同添加水平的回收率范围为90.9%~96.5%,相对标准偏差(RSD)为2.8%~4.2%。该方法简单、准确度高、分析时间短,可用于快速检测纺织品中的8种荧光增白剂。     

微波萃取高效液相色谱法测定塑料及其制品中荧光增白剂

采用微波萃取高效液相色谱法对塑料及其制品中5种荧光增白剂含量进行测定。将样品冷冻粉碎,过0.84mm的分样筛,用25 m L三氯甲烷–丙酮(3∶2)为萃取剂,在90℃的条件下微波萃取10 min,用高效液相色谱进行定性定量分析。采用Acclaim Phenyl-1柱(150 mm×4.6 mm,3μm)为分析柱,以甲醇–水(95∶5)为流动相,荧光检测器激发波长为365 nm,发射波长为430 nm。2,5-双(5-叔丁基-2-苯并恶唑基)噻吩(OB)、1,4-双(苯并恶唑基-2-基)萘(KCB)、4,4'-双(2-苯并恶唑基)二苯乙烯(OB–1)、4-(2-苯并恶唑基)-4'-(5-甲基-2-苯并恶唑基)二苯乙烯(KSN)和4,4'-双(2-甲氧基苯乙烯基)联苯(FP–127)5种荧光增白剂的质量浓度在0.5~150μg/L范围内与色谱峰面积呈良好线性关系,相关系数r≥0.999 7,检出限为0.013~0.025 mg/kg,加标回收率为84.7%~104.7%,测定结果的相对标准偏差为1.5%~4.4%(n=6)。该方法简便、准确、灵敏度高,适用于塑料及其制品中荧光增白剂含量的测定。     

2-(ω-联苯基多亚甲基)-5-联苯基噁唑-1,3和2-(ω-联苯基多亚甲基)-5-联苯基噁二唑-1,3,4的合成

继2,6-二取代苯并二噁唑、2,5-二取代噁唑和2,5-二取代噁二唑及1,4-二(苯并噁唑-1,3基-2)苯等系列化合物合成及光性能研究后,又合成了双荧光发色团化合物2-(ω-联苯基多亚甲基)-5-联苯基噁唑-1,3和2-(ω-联苯基多亚甲基)-5-联苯基噁二唑-1,3,4共七种化合物。     

2,4和8-支噁二唑衍生物的三光子吸收和三光子上转换荧光

用飞秒Ti:sapphire激光测定了3个对称噁二唑衍生物4-{N,N-双[4-(4-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]苯乙烯基)苯基]氨基}苯甲醛(Bis-oxa)、2,5-双{4-[2-N,N-双(4-{4-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]苯乙烯基}苯基)氨基苯乙烯基]苯基}-1,3,4-噁二唑(Quadri-oxa)和2,5-双(4-{2-N,N-双[({3,5-二[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]苯基}乙烯基)苯基]氨基苯乙烯基}苯基)-1,3,4-噁二唑(Octu-oxa)的三光子吸收谱和三光子荧光光谱. 在1260 nm飞秒激光激发下, 2,4和8-支噁二唑衍生物的三光子吸收系数分别为5.0×10^-5, 10.0×10^-5和10.0×10^-5 cm³/GW², 三光子频率上转换荧光发射波长分别为533, 544和551 nm. 研究了多支化合物线性吸收和透过、单光子荧光及量子产率、荧光寿命、多光子荧光光谱和三光子吸收系数谱. 对称多支噁二唑衍生物具有很强的三光子吸收和上转换荧光性质.     

对称4-枝和8-枝噁二唑衍生物的合成与荧光性质

采用Wittig-Horner和Heck反应合成了3个对称多枝[1,3,4]-噁二唑衍生物2,5-双{4-{4-[N,N-二(4-溴苯基)-氨基] 苯乙烯基}苯基}-1,3,4-噁二唑(BrPASPO), 2,5-双{4-{4-{N,N-二{4-{4-[5-(4-叔丁基苯基)-1,3,4-噁二唑基-2-]苯乙烯基}苯基}氨基}苯乙烯基}苯基}-1,3,4-噁二唑(TPASPO)和2,5-双{4-{4-{N,N-二{4-{3,5-二[5-(4-叔丁基苯基)-1,3,4-噁二唑基-2]-苯乙烯基}苯基}氨基}苯乙烯基}苯基}-1,3,4-噁二唑(OPASPO). 目标化合物的结构经过红外光谱、核磁共振氢谱、质谱和熔点确认. 在CH2Cl2溶液中三者的最大吸收波长分别在403 (BrPASPO), 408 (TPASPO)和409 nm (OPASPO), 荧光发射峰分别为495 (BrPASPO), 509 (TPASPO)和506 nm (OPASPO). 化合物TPASPO和OPASPO在CH2Cl2溶液中的荧光量子产率分别为0.47和0.45. 8枝化合物的荧光寿命高于4枝化合物. 对称多枝化合物具有很强的分子内电荷转移能力和荧光发射能力.     

多枝[1,3,4]-噁二唑衍生物的双光子吸收和光功率限幅特性

采用非线性透过率法测定了多枝[1,3,4]-噁二唑衍生物的双光子吸收性质. 测定了化合物的单光子荧光光谱和双光子荧光光谱, 在800 nm波长的激光激发下, 9-乙基-3,6-双{5-(4-叔丁基苯基)-[1,3,4] 噁二唑-2-苯乙烯基}-咔唑(3)和三-{5-(4-叔丁基苯基)-[1,3,4] 噁二唑-2-苯乙烯基-4-苯基}-胺(4)能够发出很强的蓝色和黄绿色双光子上转换荧光, 荧光峰分别位于485和547 nm. 这些多枝结构化合物的双光子吸收截面较大(数值超过104 GM), 并具有很强的光限幅效应. 多枝分子中重复单元的推拉电子结构和协同效应有效地增强了分子的双光子吸收性质.     

苯并二噁唑系列聚合物的合成及表征

以4,6-二氨基-1,3-苯二酚盐酸盐为原料,分别和对苯二甲酸、1,4-萘二甲酸、2,6-萘二甲酸、2,5-噻吩二甲酸、4,4-′(1,2-二苯基乙烯)二甲酸在多聚磷酸介质中反应,合成单环的聚(1,4-亚苯基)苯并二噁唑(PBO)、稠环的聚(1,4-亚萘基)苯并二噁唑(1,4-PNBO)和聚(2,6-亚萘基)苯并二噁唑(2,6-PNBO)、杂环的聚(2,5-亚噻吩基)苯并二噁唑(PTBO)及含有两个苯环的聚-4,4′-亚(1,2-二苯乙烯基)苯并二噁唑(4,4′-PDPEBO).采用傅立叶红外光谱、热重分析、元素分析、特性黏数分析对系列聚合物进行了表征.研究结果表明PBO、1,4-PNBO、4,4-′PDPEBO、2,6-PNBO和PTBO 5种聚合物的耐热性能依次降低,特性黏数依次为25.40、16.76、20.63、15.38和14.63 dL/g.     

2,4-双(三氯甲基)-6-(4-甲氧基-1-苯乙烯基)-s-三嗪光引发剂的合成与聚合动力学研究

本研究以4-甲氧基苯甲醛和2,4-双(三氯甲基)-6-甲-基1,3,5-三嗪为原料合成了一种引发剂2,4-双(三氯甲基)-6-(4-甲氧基-1-苯乙烯基)-s-三嗪(BMT),并利用红外光谱、紫外光谱、核磁共振等手段对其结构进行表征.利用实时红外光谱研究其光聚合动力学性能,结果表明,不同引发剂浓度,不同单体和不同光强对单体双键转化率都有一定的影响.     

Organic dye-based photoinitiating systems for visible-light-induced photopolymerization

Even though many organic dyes have been reported as photoinitiators/photosensitizers for free radical polymerization in the literature, the design and development of novel photoinitiating systems based on organic dyes adaptable for visible light irradiation, for example, 405 nm LED and sunlight still remains challenging. Recently, major achievements in the development of high-performance photoinitiating systems based on organic dyes as light-harvesting compounds and their uses as photoinitiators for photopolymerization under visible-light irradiation have clearly emerged, giving rise to abundant literature. In this review, an overview of the recently synthesized chromophores belonging to various families of organic dyes and used as photoinitiators of polymerization during the 2018–2021 period are presented and classified. Recent works have resulted in the development of new chromophores exhibiting remarkable visible light absorption properties and excellent photoinitiation abilities upon irradiation with LEDs and/or sunlight in free radical photopolymerization processes. These developments notably indicate that sunlight has the advantages of being a cheap, unlimited, broad emission spectrum, and energy-saving light source capable to be an efficient substitute to artificial light sources. The newly developed dye-based photoinitiating systems designed to initiate visible-light-induced photopolymerization processes are likely to expand the scope of application of photopolymerization in modern sciences and technologies.     

Fluorescent Brighteners as Visible LED‐Light Sensitive Photoinitiators for Free Radical Photopolymerizations

The photochemical and electrochemical investigations of commercially available, safe, and cheap fluorescent brighteners, namely, triazinylstilbene (commercial name: fluorescent brightener 28) and 2,5‐bis(5‐tert‐butyl‐benzoxazol‐2‐yl)thiophene, as well as their original use as photoinitiators of polymerization upon light emitting diode (LED) irradiation are reported. Remarkably, their excellent near‐UV–visible absorption properties combined with outstanding fluorescent properties allow them to act as high‐performance photoinitiators when used in combination with diaryliodonium salt. These two‐component photoinitiating systems can be employed for free radical polymerizations of acrylate. In addition, this brightener‐initiated photopolymerization is able to overcome oxygen inhibition even upon irradiation with low LED light intensity. The underlying photochemical mechanisms are investigated by electron‐spin resonance‐spin trapping, fluorescence, cyclic voltammetry, and steady‐state photolysis techniques.

     

Combination of transition metal carbonyls and silanes: New photoinitiating systems

The recently developed silyl radical chemistry is used in combination with transition metal carbonyls MC (dimanganese(0) decacarbonyl; dirhenium decacarbonyl; cyclopentadienyl iron(II) dicarbonyl dimer) for both free radical promoted cationic photopolymerization (FRPCP) and free radical photopolymerization (FRP). The newly developed photoinitiating systems (MC/silane and MC/silane/iodonium salt) are highly efficient under air. Photopolymerization profiles obtained upon a visible light irradiation delivered by a xenon lamp show that high conversion can be easily achieved after a 400 s exposure. Sunlight irradiations under air can also lead to tack free coatings. The processes associated with the metal carbonyl radical/silane interactions are investigated by Laser Flash Photolysis (LFP) and ESR‐Spin Trapping (ESR‐ST) experiments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1830–1837, 2010     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Benzophenone derivatives as novel organosoluble visible light Type II photoinitiators for UV and LED photoinitiating systems

Five organosoluble visible light benzophenone derivatives ( BPs ), incorporated different arylamine as electron donating groups have been synthesized and investigated for their roles as photoinitiating systems for free radical photopolymerization of acrylate monomer upon the UV and LED exposure. All the target compounds ( BP-1 – 5 ) have confirmed through ¹H NMR, HR-MS/EI-MS spectra and elemental analysis. BPs displayed red-shifted absorption, higher molar extinction coefficient and better thermal properties as compared to reference benzophenone (BP) compound. BP and BPs in combination with hydrogen donor, triethylamine (TEA), are prepared and investigated their electron spin resonance (ESR) spectroscopy and photo-DSC (photo-differential scanning calorimetry). ESR spectra of BP-1 /TEA package showed the highest radical intensity among the test photoinitiator packages. In addition, BP-1- based formulation exhibited the best double bond conversion efficiency than other BPs and comparable to the BP for the free radical polymerization (FRP) of TMPTA under similar UV light source. We then selected BP-1 /TEA and BP/TEA package for FRP under LED light irradiation. Interesting, the BP-1 /TEA system exhibited better efficiency and shorter time at maximum heat flow than BP/TEA. This result indicates BP-1 photoinitiator not only displays good light harvesting, thermal property, but exhibits conversion efficiency under the irradiation of UV and LED.     

3-Carboxylic Acid and Formyl-Derived Coumarins as Photoinitiators in Photo-Oxidation or Photo-Reduction Processes for Photopolymerization upon Visible Light: Photocomposite Synthesis and 3D Printing Applications

In this paper, nine organic compounds based on the coumarin scaffold and different substituents were synthesized and used as high-performance photoinitiators for free radical photopolymerization (FRP) of meth(acrylate) functions under visible light irradiation using LED at 405 nm. In fact, these compounds showed a very high initiation capacity and very good polymerization profiles (both high rate of polymerization (Rp) and final conversion (FC)) using two and three-component photoinitiating systems based on coum/iodonium salt (0.1%/1% w/w) and coum/iodonium salt/amine (0.1%/1%/1% w/w/w), respectively. To demonstrate the efficiency of the initiation of photopolymerization, several techniques were used to study the photophysical and photochemical properties of coumarins, such as: UV-visible absorption spectroscopy, steady-state photolysis, real-time FTIR, and cyclic voltammetry. On the other hand, these compounds were also tested in direct laser write experiments (3D printing). The synthesis of photocomposites based on glass fiber or carbon fiber using an LED conveyor at 385 nm (0.7 W/cm²) was also examined.     

Visible light‐emitting diode‐sensitive thioxanthone derivatives used in versatile photoinitiating systems for photopolymerizations

Novel thioxanthone (TX) derivatives are used as versatile photoinitiators upon visible light‐emitting diode (LED; e.g., 405, 425, and 450 nm) exposure. The mechanisms for the photochemical generation of reactive species (i.e., cations and free radicals) produced from photoinitiating systems based on the photoinitiator and an iodonium salt, tris(trimethylsilyl)silane, or an amine, were studied by UV–vis spectroscopy, fluorescence, cyclic voltammetry, steady‐state photolysis, and electron spin resonance spin‐trapping techniques. The reactive species are particularly efficient for cationic, free radical, hybrid, and thiol‐ene photopolymerizations upon LED exposure. The optimized photoinitiating systems exhibit higher efficiency than those of reference systems (i.e., isopropyl TX‐based photoinitiating systems), especially in the visible range. According to their beneficial features, these photoinitiating systems have considerable potential in photocuring applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4037–4045     

Aminothiazonaphthalic anhydride derivatives as photoinitiators for violet/blue LED‐Induced cationic and radical photopolymerizations and 3D‐Printing resins

The cations and radicals produced in aminothiazonaphthalic anhydride derivatives (ATNAs) combined with an iodonium salt, N‐vinylcarbazole, amine, or chloro triazine initiate the ring‐opening cationic polymerization of epoxides and the free radical polymerization of acrylates under LEDs at 405 or 455 nm. The photoinitiating ability of these novel photoinitiating systems is higher than that of the well‐known camphorquinone‐based systems. An example of the high reactivity of the new proposed photoinitiator is also provided in resins for 3D‐printing using a LED projector@405 nm. The chemical mechanisms are investigated by steady‐state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1189–1196     

Radical and cationic photopolymerization: New pyrylium and thiopyrylium salt‐based photoinitiating systems

New thiopyrylium and pyrylium salt‐based photoinitiating systems for visible light induced free radical polymerization (FRP) or free radical promoted cationic polymerization (FRPCP) under visible lights are presented. The reaction mechanisms are investigated by laser flash photolysis and the structure/reactivity trend is discussed. The abilities of two different classes of coinitiators are investigated (thiols/disulfides and silanes). In FRP, upon irradiation with a xenon lamp (λ > 390 nm), the (thio)pyrylium salts in combination with thiols or disulfides lead to very high polymerization rates, compared to the reference eosin Y/methyldiethanolamine system. In FRPCP, silanes are found much better coinitiators: a high efficiency of the photopolymerization under air is noted. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7369–7375, 2008