计算机辅助三聚氰胺分子印迹聚合物的制备

以三聚氰胺(MAM)为印迹分子,丙烯酰胺(AM)、甲基丙烯酸(MAA)、N,N-亚甲基双丙烯酰胺(MBA)和衣康酸(IA)为功能单体,二乙烯基苯(DVB)、乙二醇双甲基丙烯酸酯(EGDMA)和三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂,采用量子化学密度泛函理论的长程校正方法模拟并探讨了MAM与4种功能单体的成键作用位点、成键数目、印迹反应摩尔比及印迹作用机理.依据结合能(ΔE)优化了功能单体和交联剂,并借助分子中原子理论(AIM)揭示了MAM与功能单体印迹作用的本质.计算结果表明,MAM通过氢键与4种功能单体以摩尔比1∶6进行印迹聚合,其中IA与MAM形成的复合物结合能最低,结构最稳定;与TRIM和EGDMA交联剂相比,DVB与MAM结合能最低,更适合作为MAM-IA印迹聚合物的交联剂.采用沉淀聚合法合成MAM分子印迹聚合物(MAM-MIPs)并测定其吸附性,当MAM与IA印迹摩尔反应比为1∶6时,以DVB为交联剂时制备的MAM-MIPs吸附性最好,其微球平均粒径为195 nm;Scatchard分析结果表明,在所研究的浓度范围内MIPs对印迹分子MAM的结合位点是等价的,其最大表观吸附量Qmax为20.79mg/g,离解平衡常数Kd为58.82 mg/L;与环丙氨嗪(CYR)、三聚氰酸(CYA)和三聚硫氰酸(TRI)在牛奶中的吸附量相比,MAM-MIPs对MAM表现出较强的特异吸附能力.     

非诺贝特印迹聚合物的制备与性能研究

以非诺贝特(FNB)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了FNB分子印迹聚合物(MIP)。IR和SEM表征的结果显示:FNB分子印迹聚合物中存在与模板分子相互作用的特征基团,与空白聚合物(NIP)的表面形态显著不同,说明MIP存在与模板分子相互识别的结合位点。采用静态平衡结合方法和Scatchard模型评价了FNB分子印迹聚合物的结合特性和识别机理,并考察了其选择性吸附能力。结果表明,FNB分子印迹聚合物存在能量相异的两类特异性结合位点,对FNB具有高选择吸附特性,饱和吸附量为6.363mg/g。     

酚酞分子印迹聚合物的制备及特异吸附性能

以泻药酚酞为模板分子,4-乙烯基吡啶为功能单体制备了模板分子和功能单体不同比例的一系列酚酞分子印迹聚合物。利用扫描电镜对聚合物进行了表面形态分析,采用静态平衡实验法研究了聚合物对模板分子及其类似物的吸附行为和选择性识别能力。实验结果表明,所制备的分子印迹聚合物,吸附 3 h 后基本接近最大吸附量,其中模板分子、4-乙烯基吡啶和交联剂的摩尔比为 1∶6∶20的MIP2的印迹因子为 2.30,效果最佳。Scatchard 分析表明, 在所研究的浓度范围内,吸附过程存在两类结合位点,一类高亲和力结合位点的离解常数为Kd1= 0.63 mmol/L,最大表观结合量 Qmax1 = 25.4 umol/g,另一类低亲和力结合位点的离解常数为 Kd2 =3.5 mmol/L,最大表观结合量 Qmax2 = 61.9 umol/g,通过与酚酞类似物质在酚酞分子印迹聚合物上的吸附行为比较,表明对酚酞具有很好的选择性吸附。     

本体聚合法制备2-氯酚分子印迹聚合物及其性能评价

采用本体聚合法,以2-氯酚为模板分子,4-乙烯吡啶为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂合成了一系列分子印迹聚合物,并通过选择性实验和静态吸附实验对聚合物的选择性及吸附性能进行评价.结果显示:当以甲苯作为致孔剂,功能单体与模板分子的摩尔比为2:1时,聚合物对模板分子的印迹因子为1.71,亲和位点总数Bmax为0.1137 mmol/g,具有最优的选择性和吸附能力.     

胆酸印迹聚合物的制备及在含水介质中的结合性能

为了在含水介质中进行有效印迹,本研究中以双甲基丙烯酰-β-环糊精（BMA-β-CD）和2-(二乙基胺基)乙基甲基丙烯酸酯(DEAEM)为功能单体制备了胆酸印迹聚合物MIP1,并用平衡结合实验研究了MIP1在含水介质中对模板分子的识别能力。结果表明,MIP1比单独以BMA-β-CD或DEAEM为功能单体制备的印迹聚合物MIP2和MIP3,显示出对模板分子更好的选择性结合能力。MIP1的特异性吸附量ΔCP为38.81μmol/g,印迹因子IF为2.46。研究表明,在含水介质中,利用模板分子与功能单体之间的疏水作用和离子作用是提高印迹聚合物分子识别能力的关键。研究还表明,在识别过程中,疏水作用在驱动分子进入印迹孔穴时起重要作用。     

分子印迹固相萃取-液相色谱联用法测定3种新烟碱类农药的残留

以噻虫啉为模板分子制备了对吡虫啉、氯噻啉、噻虫啉具有特异性识别的分子印迹聚合物。功能单体与模板分子最佳摩尔比为:n(噻虫啉)∶n(甲基丙烯酸)∶n(苯乙烯)=1∶4∶4。动态吸附和选择性吸附表明,此印迹聚合物能够对目标物快速吸附,且有很好的选择性。Scatchard分析表明,此印迹聚合物对吡虫啉、氯噻啉、噻虫啉最大吸附量分别为31.7,36.7和45.3 mg/g。用此印迹聚合物作为固相萃取吸附剂处理加标样品,目标物的回收率为80.2%~98.8%,RSD为1.2%~4.5%(n=3)。本方法用于实际样品检测,获得了满意的结果。     

分子烙印聚合物对抗胆碱能类药物的选择性固相吸附行为研究

以3种结构类似的抗胆碱能药物盐酸新托品(1116)、盐酸苯环壬酯(8021)和盐酸戊乙奎醚(8018)为模板分子合成分子烙印聚合物,采用固相萃取-高效液相色谱法(SPE-HPLC)考察各MIP对乙腈溶液中结构类似的药物1116、8021、8018及盐酸卡马特灵(1113)、氯苯那敏(CPA)和樟柳碱(AT3)的固相吸附行为,探讨MIP特异性识别的影响因素及机理。结果表明,在MIP合成中,功能单体、交联剂及引发剂的种类和用量、引发方式、模板分子与功能单体的比例等因素对MIP的特异性识别能力均有重要影响。以1116、8021和8018为模板分子、甲基丙烯酸(MAA)为功能单体、三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂,在乙腈中合成的各MIP均表现出较强的特异性识别能力。其中,MIP对待测物的非特异性吸附主要由其网状结构表面游离的极性基团引起;MIP的特异性识别过程中,识别位点与待测物的空间结构匹配起着更为重要的作用。     

橙皮苷印迹聚合物的识别性能及机理研究

为了制备对橙皮苷(HES)具有特定识别能力的吸附材料,以HES为模板分子,丙烯酰胺(AM)为功能单体,甲基丙烯酸乙二醇酯(EDMA)为交联剂,在甲醇中制备了HES印迹聚合物(MIP),采用平衡吸附实验方法研究了聚合物的吸附性能和选择性能,探讨了聚合物的印迹机理和识别机理.结果表明,MIP对HES具有较高的亲和性和选择性.当HES浓度为0.048 mmol/L时,MIP及相应NMIP对HES的分配系数KD分别为10.17 和2.973,印迹因子α达到3.421.MIP对结构相似物芦丁及柚皮苷的选择因子β分别为2.446和1.246.机理研究表明识别位点来自AM与HES苯甲酰系统的氢键作用,吸附溶液中水含量的增加对MIP的识别能力有较大的影响.最后,以高效液相色谱研究了MIP在样品中的分离富集能力,表明该印迹聚合物具有一定的应用潜能.     

苏丹红I分子印迹聚合物的制备及其性能评价

以苏丹红I为模板分子,通过沉淀聚合法制备了一种对苏丹红I具有特异性吸附的分子印迹聚合物。通过选择性评价和前沿色谱实验,评价了致孔剂的选择和用量、功能单体和模板分子的物质的量比对分子印迹聚合物识别性能的影响。实验结果表明: 当以甲醇和乙腈的混合液(体积比为30:10)为致孔剂,甲基丙烯酸(MAA)为功能单体,且功能单体和模板分子的物质的量比为8:1时,分子印迹聚合物的印迹因子为2.32,亲和位点总数(Bt)为0.50 μmol/g;将其作为固相萃取柱填料用于辣椒粉样品中痕量苏丹红I的净化和富集,结果表明: 苏丹红I浓度在10～500 μmol/L范围内时,呈现良好的线性关系(r=0.999);检出限为3.3 μmol/L,加标回收率为95.87%～98.41%,相对标准偏差低于3.1%。该方法有望用于辣椒粉样品中苏丹红I添加剂的常规检测。     

选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

三聚氰胺磁性印迹固相萃取材料的制备及其应用

采用磁性氧化石墨烯(GO)为载体,三聚氰胺(MEL)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,制备了新型三聚氰胺磁性印迹聚合物。 采用扫描电子显微镜(SEM)、透射电子显微（TEM）、差热分析(TG)和样品振动磁强计(VSM)对该磁性印迹聚合物进行表征和分析,结果表明,在氧化石墨烯表面成功制备磁性印迹聚合物。 结合高效液相色谱分析技术对该印迹聚合物的吸附性能进行检测,结果表明,该磁性印迹聚合物对三聚氰胺表现出特异性吸附性能,最大吸附容量为33.11 mg/g;相对于环丙氨嗪和三聚氰酸,三聚氰胺的选择因子(β)分别是2.43和2.84。 结合磁固相萃取与液相色谱检测技术,实现了牛奶样品溶液中三聚氰胺的分离、富集和检测。     

三聚氰胺磁性表面分子印迹聚合物的制备及其在牛奶样品中的应用

以三聚氰胺（MEL）为模板分子、α-甲基丙烯酸（MAA）为功能单体、乙二醇二甲基丙烯酸酯（EGDMA）为交联剂、Fe₃O₄@SiO₂磁性材料为载体,制备得到三聚氰胺磁性表面分子印迹聚合物（MEL-MMIPs）。分别使用透射电镜（TEM）、热重分析（TGA）、傅立叶变换红外光谱（FT-IR）和振动样品磁强计（VSM）对制备的MMIPs进行表征。结果表明,印迹聚合物层成功地在Fe₃O₄@SiO₂磁性材料表面包覆,印迹粒子具有良好的磁学性能。将磁性分子印迹聚合物应用于牛奶中三聚氰胺的富集分离,采用高效液相色谱法（HPLC）检测,结果显示该磁性表面分子印迹聚合物对三聚氰胺有特异性吸附。以制备的MMIPs为吸附剂,建立了一种简单、快速和高选择性测定牛奶中三聚氰胺的方法。     

Preparation and application of molecularly imprinted polymer for isolation of chicoric acid from Chicorium intybus L. medicinal plant

Molecularly imprinted polymer (MIP) was synthesized and applied for the extraction of chicoric acid from Chicory herb (Chicorium intybus L.). A computational study was developed to find a suitable template to functional monomer molar ratio for MIP preparations. The molar ratio was chosen based on the comparison of the binding energy of the complexes between the template and functional monomers. Based on the computational results, eight different polymers were prepared using chicoric acid as the template. The MIPs were synthesized in a non-covalent approach via thermal free-radical polymerization, using two different polymerization methods, bulk and suspension. Batch rebinding experiments were performed to evaluate the binding properties of the imprinted polymers. The best results were obtained with a MIP prepared using bulk polymerization with 4-vinylpyridine (4-VP) as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the crosslinker with a molar ratio of 1:4:20. The best MIP showed selective binding ability toward chicoric acid in the presence of the template’s structural analogues, caffeic acid, caftaric acid and chlorogenic acid.     

邻苯二甲酸二（2-丙基庚）酯分子印迹固相萃取剂的制备及其应用

以邻苯二甲酸二辛酯（DOP）为虚拟模板分子,α-甲基丙烯酸（MAA）为功能单体,乙二醇二甲基丙烯酸酯（EDMA）为交联剂,采用沉淀聚合法制备了对邻苯二甲酸二（2-丙基庚）酯（DPHP）具有高选择性的分子印迹聚合物（MIP）。用紫外分光光度法探索了不同功能单体与模板分子的结合能力,与功能单体丙烯酸（AA）相比,MAA与DOP的结合能力更强,其最佳结合的物质的量比为6：1。考察MIP对DOP、DPHP、邻苯二甲酸二甲酯（DMP）、邻苯二甲酸二丁酯（DBP）的选择吸附性能,发现该聚合物对DPHP具有更高的选择吸附性。以制备的聚合物为固相萃取填料,结合HPLC分析,考察了淋洗剂与洗脱剂的种类和用量对DPHP回收率的影响。将DPHP甲醇溶液加载至萃取柱后用1 mL甲醇-水（1：9,v/v）淋洗,5 mL甲醇-乙酸（9：1,v/v）洗脱,DPHP在分子印迹固相萃取（MISPE）柱上的回收率达到96.8%,而在非印迹固相萃取（NISPE）柱上的回收率仅为52.9%。将建立的MISPE-HPLC方法应用于测定兔口服DPHP后不同时间点兔血清中DPHP的浓度,发现其血药浓度的最大值为5.88 μg/mL,达峰值时间为4 h,DPHP加标回收率为90.0%~92.0%,相对标准偏差小于5%。     

Synthesis and characterization of poly(methacrylic acid)‐based molecularly imprinted polymer nanoparticles for controlled release of trinitroglycerin

In this study, a novel molecularly imprinted polymer (MIP) based on methacrylic acid (MAA) monomer was synthesized to control release of trinitroglycerin (TNG) as a vasodilator drug for adjusting the cardiac conditions. For this purpose, TNG nanospheres based on poly(methacrylic acid) (PMAA) were prepared by using the precipitation polymerization process. The synthesized TNG nanospheres‐based MIP samples were characterized by means of Fourier transform infrared spectroscopy and field‐emission scanning electron microscopy in order to investigate their provided active functional groups within the cavities as well as morphology, respectively. The results showed that the appropriate non‐covalent bindings between the TNG (template) and PMAA provided within the MIP samples with imprinting factor of 1.98 were achieved by optimizing the amounts of trimethylolpropane trimethacrylate (TRIM) as a cross‐linker and MAA as a functional monomer. On the basis of these obtained conditions, the polymeric nanospheres containing TNG were formed in shape of spherical particles with an average diameter sizing about 40 nm. These remarkable results were obtained by the use of 1:10 molar ratio of TRIM/TNG and 1:6 molar ratio of MAA/TNG. Moreover, in‐vitro release of the TNG from the MIP samples to phosphate buffer solution (pH = 7.4) indicated that the MIP samples had a moderate and gradual release compared with the non‐imprinted polymer samples. These outcomes conducted us to consider the samples as carriers for adjusting potentially cardiac conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

Phenylurea herbicides-selective polymer prepared by molecular imprinting using N-(4-isopropylphenyl)-N′-butyleneurea as dummy template

A phenylurea herbicides-selective molecularly imprinted polymer (MIP) was prepared using N-(4-isopropylphenyl)-N′-butyleneurea as a dummy template and toluene as a porogen. The experimental results showed that the optimum molar ratio of template, functional monomer (MAA) and cross-linker (EDMA) was 1:8:20. Scatchard analysis showed that two classes of binding sites were formed in the imprinted polymer with dissociation constants of 26.81 μmol l⁻¹ and 1.428 mmol l⁻¹. The affinity and selectivity of MIP for phenylurea herbicides were studied. Among the 14 phenylurea herbicides tested, the MIP prepared showed obviously high affinity and selectivity for 10 chemicals (monuron, diuron, isoproturon, fenuron, chlortoluron, difenoxuron, metoxuron, neburon, buturon and fluometuron) with dichloromethane containing 10% hexane as mobile phase while non-imprinted polymer showed very low affinity for all the phenylurea herbicides tested. The experimental and calculated results also indicated that the size and property of the group at the N′ position of phenylurea molecules have great influence on the affinity of MIP for them and the recognition site is mainly located at the N′ position of phenylurea herbicides.     

N,P掺杂型C@Mo_2C催化剂的制备及其催化CO_2加氢反应研究

以三聚氰胺苯甲酸盐为碳源和氮源、以三聚氰胺磷钼酸盐为钼源、磷源和氮源,采用程序升温的方法制备了系列N,P掺杂型C@Mo_2C催化剂。采用XRD、SEM、TEM和XPS等对催化剂的结构、形貌和表面特性进行了表征,研究了三聚氰胺苯甲酸盐中n(三聚氰胺)/n(苯甲酸)、前驱体中n(C)/n(Mo)等因素对所制备催化剂的结构及其在二氧化碳加氢反应中催化性能的影响。在反应温度为220℃、反应压力为3.0 MPa、空速为3 600 m L/(g·h)的条件下,在N,P掺杂型C@Mo_2C的催化作用下,CO_2转化率可以达到12.2%,此时产物中CH_3OH的选择性达到52.2%。     

Molecularly imprinted polymer as SPE sorbent for selective extraction of melamine in dairy products

In this paper, a highly selective sample cleanup procedure combining molecular imprinting and solid-phase extraction (MI-SPE) was developed for the isolation of melamine in dairy products. The molecularly imprinted polymer (MIP) was prepared using melamine as the template molecule, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linking monomer. The melamine imprinted polymer was used as selective sorbent for the solid-phase extraction of melamine from dairy products. An off-line MI-SPE method followed by high-performance liquid chromatography with diode-array detection for the detection of melamine was also established. The mean recoveries of melamine from ultra-heat treatment (UHT) milk and milk powders were 92.9-98.0% and 91.6-102.8%, respectively. Good linearity was obtained from 0.5 μM to 10 μM (r > 0.999) with a quantitation limit of 0.5 μmol/L (0.06 ppm) which was sufficient to analyse melamine at the maximum level permitted by U.S. Food and Drug Administration (1 ppm) in dairy products. It was demonstrated that the proposed MI-SPE-HPLC method could be applied to direct determination of melamine in dairy products.     

分子印迹固相萃取—高效液相色谱法同时测定鸡血浆中环丙氨嗪和三聚氰胺残留

建立了基于分子印迹固相萃取-高效液相色谱同时测定鸡血浆中环丙氨嗪和三聚氰胺残留方法.以环丙氨嗪为模板分子,甲基丙烯酸为功能单体,合成了对环丙氨嗪和三聚氰胺具有高选择性的分子印迹聚合物.作为固相萃取填料,评价和优化了其分离、富集环丙氨嗪和三聚氰胺的固相萃取条件.血浆用1％三氯乙酸沉淀蛋白,分子印迹固相萃取净化.在辛烷磺酸...     

Preparation of melamine molecularly imprinted polymer by computer‐aided design

Melamine was chosen as template, methacrylic acid was chosen as functional monomer, and divinylbenzene, ethylene glycol dimethacrylate, trimethylolpropane trimethylacrylate were chosen as cross‐linking agents, respectively. The WB97XD/6‐31G(d, p) method was used to calculate the geometry optimization of the different imprinting ratios, the action sites, the bonding situation, and the optimization of the cross‐linking agents. The nature of the imprinting effect was also studied by the atoms in molecules theory. The theoretical results showed that melamine interacts with methacrylic acid by hydrogen bonding, and the melamine molecularly imprinted polymers with a molar ratio of 1:6 have the most hydrogen bonds and the most stable structure. Divinylbenzene is the best cross‐linking agent for the melamine molecularly imprinted polymers. The melamine molecularly imprinted polymers were synthesized by precipitation polymerization. The results showed that the maximum adsorption capacity for molecularly imprinted polymers towards melamine is 19.84 mg/g, and the adsorption quantity of the polymers to melamine is obviously higher than that of cyromazine, cyanuric acid, and trithiocyanuric in milk. This study could provide theoretical and experimental references for the screening of the imprinting ratio and the cross‐linking agent for the given template and monomer system.