Influence of Monomer and Initiator Concentrations on the Simultaneous Grafting of Several Monomers onto Insoluble Collagen

Simultaneous grafting of 2-hydroxyethyl methacrylate and methyl methacrylate (3:1 and 3:2 mole ratios) onto insoluble collagen with ceric ammonium nitrate as initiator was attempted with a view to optimizing conditions for the preparation of hydrogels. The influence of monomer and initiator concentrations on the grafting reactions was investigated. The grafting results are discussed in the light of grafting efficiency and percentage of grafting. They were found to be lower when the 3:1 mole ratio of monomers was used.     

Effect of chain transfer agent on the radiation grafting of methyl methacrylate onto chromium(III) crosslinked collagen

Thioglycolic acid is an efficient agent for controlling the lengths of poly(methyl methacrylate) (PMMA) chains grafted onto collagen. The addition of 0.006 mol of thioglycolic acid per one mol of methyl methacrylate (MMA) has no effect on the yield of grafting, but brings about a decrease in the molecular weight of grafted PMMA by about 50%. The mechanism of the grafting reaction in the presence of the chain transfer agent thioglycolic acid is discussed on the basis of the results.     

Collagen adsorption and structure on polymer surfaces observed by atomic force microscopy

The structure and adsorption patterns of type I and type III collagen were imaged on various polymer substrates with atomic force microscopy. Type I collagen had higher adsorption on polystyrene than on a series of polymethacrylates and formed a network of tightly, interwoven strands. Upon adsorption to different polymethacrylates, with varying side chain lengths, the collagen molecules formed long, branching fibrils. Types I and III collagen had different adsorption patterns, in some cases, on the identical substrate material. For example, instead of forming a tightly packed network, type III forms long, branching fibers on the polystyrene surface. On other materials, such as poly(n-butyl methacrylate), the two types of collagen showed similar adsorption pattern and structure. Adsorbed collagen was also imaged on various blends of polystyrene and polymethacrylates to determine how the polymer surface chemical structure and surface topography mediates protein adsorption.     

介孔二氧化硅-接枝胶原杂化材料的制备和表征(英)

利用接枝胶原与介孔二氧化硅制备一种新型生物无机杂化材料。用甲基丙烯酸甲酯为接枝剂对胶原进行共聚改性制得接枝胶原。以正硅酸乙酯为模板，十二烷基三甲基溴化铵为表面活性剂，用一个简单的热处理过程制得介孔二氧化硅。介孔二氧化硅-接枝胶原杂化材料通过超声分散接枝胶原与介孔二氧化硅的混合物制得，其三维结构用X射线衍射表征，晶格参数a，b和c分别为0.68，0.37和1.64 nm，为正交晶型。氮气吸附-解吸等温线显示杂化材料的比表面积可达273 m²·g^-1，孔体积为0.13 cm³·g^-1，平均孔径3.4 nm，分布窄。该杂化材料在8～14 μm波长的红外发射率可低至0.323，在光电子学器件和红外隐身领域具有潜在应用价值。     

胶原接枝改性用于制备红外低发射率涂层的研究

用甲基丙烯酸甲酯在硝酸铈铵和偶氮二异丁腈的联合引发下对胶原进行接枝共聚改性,并用制得的胶原接枝共聚物颗粒与氧化铟纳米粒子复合制成涂层.研究了接枝反应温度及萃取剂对胶原接枝共聚物及其复合物涂层的红外发射率的影响,同时对复合物涂层红外发射率的降低机理进行了初步探讨.结果表明,在反应温度为50～55℃时,先后用丙酮和水作为萃取剂,可制得粒径为40～80nm的胶原接枝共聚物颗粒,该颗粒与氧化铟纳米粒子复合后,涂层的红外发射率(8～14μm)较单一的胶原接枝共聚物和氧化铟纳米粒子的红外发射率明显降低,胶原接枝共聚物纳米颗粒和氧化铟纳米粒子之间显示出较强的复合协同效应.     

Nano-organized collagen layers obtained by adsorption on phase-separated polymer thin films

The organization of adsorbed type I collagen layers was examined on a series of polystyrene (PS)/poly(methyl methacrylate) (PMMA) heterogeneous surfaces obtained by phase separation in thin films. These thin films were prepared by spin coating from solutions in either dioxane or toluene of PS and PMMA in different proportions. Their morphology was unraveled combining the information coming from X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and water contact angle measurements. Substrates with PMMA inclusions in a PS matrix and, conversely, substrates with PS inclusions in a PMMA matrix were prepared, the inclusions being either under the form of pits or islands, with diameters in the submicrometer range. The organization of collagen layers obtained by adsorption on these surfaces was then investigated. On pure PMMA, the layer was quite smooth with assemblies of a few collagen molecules, while bigger assemblies were found on pure PS. On the heterogeneous surfaces, it appeared clearly that the diameter and length of collagen assemblies was modulated by the size and surface coverage of the PS domains. If the PS domains, either surrounding or surrounded by the PMMA phase, were above 600 nm wide, a heterogeneous distribution of collagen was found, in agreement with observations made on pure polymers. Otherwise, fibrils could be formed, that were longer compared to those observed on pure polymers. Additionally, the surface nitrogen content determined by XPS, which is linked to the protein adsorbed amount, increased roughly linearly with the PS surface fraction, whatever the size of PS domains, suggesting that adsorbed collagen amount on heterogeneous PS/PMMA surfaces is a combination of that observed on the pure polymers. This work thus shows that PS/PMMA surface heterogeneities can govern collagen organization. This opens the way to a better control of collagen supramolecular organization at interfaces, which could in turn allow cell-material interactions to be tailored.     

Protein immobilization on the surface of poly-L-lactic acid films for improvement of cellular interactions

To covalently immobilize gelatin or collagen type I on poly-L-lactic acid (PLLA) film surfaces poly(hydroxyethyl methacrylate) (PHEMA) or poly(methacrylic acid) (PMAA) was grafted via photooxidization and subsequent UV-induced polymerization [Makromol. Chem. 186 (1985) 1533.1]. For films grafted with PHEMA, methyl sulfonyl chloride was used to activate the hydroxyl groups and for films grafted with PMAA 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide was used to activate the carboxyl groups. Gelatin and collagen were finally reacted with the activated hydroxyl or carboxyl groups to obtain covalently immobilized protein layers. Grafting of PHEMA, PMAA and protein on the surfaces was confirmed using ATR-IR and XPS. Surface wettability of the modified films was improved. The protein immobilized PLLA may be widely used as a biocompatible material.     

Miscibility of Halogen-containing Polymethacrylates with Various Poly(alkyl acrylate)s

The miscibility behavior of a series of halogen-containing polymethacrylates with poly(methyl acrylate), poly(ethyl acrylate), poly(n-propyl acrylate) and poly(n-butyl acrylate) was investigated by differential scanning calorimetry and for lower critical solution temperature (LCST) behavior. Poly(chloromethyl methacrylate), poly(1-chloroethyl methacrylate), poly(2-chloroethyl methacrylate), poly(2,2-dichloroethyl methacrylate), poly(2,2,2-trichloroethyl methacrylate), poly(2-fluoroethyl methacrylate) and poly(1,3-difluoroisopropyl methacrylate) are miscible with some of the poly(alkyl acrylate)s. Most of the miscible blends show LCST behavior. However, poly(3-choloropropyl methacrylate), poly(3-fluoropropyl methacrylate), poly(4-fluorobutyl methacrylate), poly(1,1,1,3,3,3-hexafluoroisopropyl methacrylate), poly(2-bromoethyl methacrylate) and poly(2-iodoethyl methacrylate) are immiscible with any of the poly(alkyl acrylate)s studied. © 1997 John Wiley & Sons, Ltd.     

An Injectable Integration of Autologous Bioactive Concentrated Growth Factor and Gelatin Methacrylate Hydrogel with Efficient Growth Factor Release and 3D Spatial Structure for Accelerated Wound Healing

Growth factors are essential for wound healing owing to their multiple reparative effects. Concentrated growth factor (CGF) is a third-generation platelet extract containing various endogenous growth factors. Herein, a CGF extract solution is combined with gelatin methacrylate (GM) by physical blending to produce GM@CGF hydrogels for wound repair. The GM@CGF hydrogels show no immune rejection during autologous transplantation. Compared to CGF, GM@CGF hydrogels not only exhibit excellent plasticity and adhesivity but also prevent rapid release and degradation of growth factors. The GM@CGF hydrogels display good injectability, self-healing, swelling, and degradability along with outstanding cytocompatibility, angiogenic functions, chemotactic functions, and cell migration-promoting capabilities in vitro. The GM@CGF hydrogel can release various effective molecules to rapidly initiate wound repair, stimulate the expressions of type I collagen, transform growth factor β1, epidermal growth factor, and vascular endothelial growth factor, promote the production of granulation tissues, vascular regeneration and reconstruction, collagen deposition, and epidermal cell migration, as well as prevent excessive scar formation. In conclusion, the injectable GM@CGF hydrogel can release various growth factors and provide a 3D spatial structure to accelerate wound repair, thereby providing a foundation for the clinical application and translation of CGF.     

Thermal degradation of phenyl methacrylate-methyl methacrylate copolymers

The degradation behaviours of poly(phenyl methacrylate), four phenyl methacrylate-methyl methacrylate copolymers which span the composition range, and poly(methyl methacrylate) have been compared by using thermogravimetry in dynamic nitrogen and thermal volatilisation analysis (TVA) under vacuum, with programmed heating at 10°C/min. Volatile products have been separated by subambient TVA and identified and the cold ring fraction and partially degraded polymer have been examined by ir spectroscopy. Poly(phenyl methacrylate) resembles poly(methyl methacrylate) in degrading completely to monomer. Copolymers of phenyl methacrylate and methyl methacrylate are more stable than the homopolymers. On degradation, the major products are the two monomers. Minor products from all the copolymers include carbon dioxide, dimethylketene, isobutene and formaldehyde. Copolymers with low and moderate phenyl methacrylate contents show the formation of anhydride ring structures in the cold ring fraction and partially degraded copolymer, together with small amounts of methanol in the volatile products. Carbon dioxide is a more significant product at lower phenyl methacrylate contents.The mechanism of degradation is discussed.     

Copolymerization of 2-Hydroxyethyl Methacrylate with Alkyl Methacrylates. Part IV. Mechanical Properties and Biocompatibility

Mechanical properties of copolymers of 2-hydroxyethyl methacrylate with methyl methacrylate, ethyl methacrylate, and n-butyl methacrylate have been investigated using an Instron tensile tester. It was observed that the overall mechanical properties decrease as the ester alkyl group of alkyl methacrylate becomes bulkier. Biocompatibility of the copolymers was also investigated by implanting them subcutaneously in rats.     

Copolymerization of 2,2-diallyl-1,1,3,3-tetraethylguanidinium chloride and alkyl methacrylates

Radical copolymerization of 2,2-diallyl-1,1,3,3-tetraethylguanidinium chloride with methyl methacrylate and allyl methacrylate in the bulk and methanol solution in the presence of azobis-isobutyric acid dinitryle at 70–90°C has been studied. Copolymerization of 2,2-diallyl-1,1,3,3-tetraethylguanidinium chloride with methyl methacrylate or allyl methacrylate in the bulk proceeds with formation of random copolymers enriched in methacrylate units; in the copolymerization of 2,2-diallyl-1,1,3,3-tetraethylguanidiny chloride with methyl methacrylate in methanol, the copolymerization constants of the monomers become close. The kinetic parameters of the reaction have been studied, the relative activities of the monomers have been determined. It has been found that 2,2-diallyl-1,1,3,3-tetraethylguanidinium chloride is copolymerized with allyl methacrylate or methylmethacrylate to form pyrrolidinium structures in the cyclolinear polymer chain. At high degrees of conversion of the copolymerization of 2,2-diallyl-1,1,3,3-tetraethylguanidinium chloride with allyl methacrylate, the viscosity increases and the side polymer chains are crosslinked by “allyl bonds” to form insoluble copolymers, swelling in benzene and DMSO.     

Synthesis of polysulfohexyl methacrylate with anticoagulant activity

Sulfohexyl methacrylate and its polymer have been prepared. The anticoagulation activity of this polymer and copolymers with hydroxyethyl methacrylate and acrylamide was compared with that of polyhydroxyethyl methacrylate, polysulfoethyl methacrylate, and heparin. The activated-carbon microcapsule coated with polysulfohexyl methacrylate showed itself a promising adsorbent.     

Controlled radical polymerization of methacrylates of various structures in the presence of the AIBN-FeCl3-N,N-dimethylformamide catalytic system

The controlled radical polymerization of methyl methacrylate, 2-ethoxyethyl methacrylate, and tert-butyl methacrylate conducted via atom-transfer radical polymerization in the presence of the AIBN-FeCl₃· 6H₂O-N,N-dimethylformamide catalytic system is studied. For all the systems under study, the rate of reaction is first order with respect to the monomer concentration. The number-average molecular mass of the polymers linearly increases with conversion, and their polydispersity indexes are below 1.6. The rate of polymerization decreases in the following sequence: 2-ethoxyethyl methacrylate > methyl methacrylate > tert-butyl methacrylate. The presence of ω-terminal chlorine atoms in polymer macromolecules is confirmed by ¹H NMR spectroscopy and through the block copolymerization of methyl methacrylate with a poly(ethoxyethyl methacrylate)-based macroinitiator.     

Photoinitiated copolymerization of acetonyl methacrylate

Synthesis of two methacrylate monomers derivatives of carbonyl compounds: vanillin and acetone are presented. The obtained acetonyl methacrylate was used for copolymerization with methyl methacrylate. Copolymerizations were carried out in the presence of commercially available photoinitiator Irgacure 651. Thermal and mechanical properties of the copolymers with different concentration of acetonyl methacrylate were studied.     

Mechanism of generation of photoelastic birefringence in methacrylate polymers for optical devices

We clarified the birefringence properties of poly(methyl methacrylate), poly(ethyl methacrylate), poly(isobutyl methacrylate), poly(cyclohexyl methacrylate), poly(isopropyl methacrylate), and poly(tert‐butyl methacrylate). We demonstrated that the conformational change in polymer molecules that causes orientational birefringence differs from that causing photoelastic birefringence. Orientational birefringence depends mainly on the orientation of the main chains of the methacrylate polymers above T_g. On the other hand, photoelastic birefringence in elastic deformation below T_g depends mainly on the orientation of the side chains while the main chains are scarcely oriented. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2029–2037, 2010     

DSC analysis of compatibility of poly(phenyl methacrylate) and some poly(xylenyl methacrylates)

Glass transition temperatures of blends of (1) poly-(phenyl methacrylate) and poly(2,3-xylenyl methacrylate), (2) poly-(phenyl methacrylate) and poly(2,6-xylenyl methacrylates and (3) poly-(2,3-xylenyl-) and poly(2,6-xylenyl methacrylate) were measured. The data obtained suggest the existance of compatibility for blends of poly(xylenyl methacrylates) mentioned and incompatibility for both poly(phenyl methacrylate)/poly(xylenyl methacrylate) systems.     

Enzymatic synthesis of sorbitan methacrylate according to acyl donors

Recently, sugar polymers have been considered for use as biomaterials in medical applications. These biomaterials are already used extensively in burn dressings, artificial membranes, and contact lenses. In this study, we investigated the optimum conditions under which the enzymatic synthesis of sorbitan methacrylate can be affected using Novozym 435 in t-butanol from sorbitan and several acyl donors (ethyl methacrylate, methyl methacrylate, and vinyl methacrylate). The enzymatic synthesis of sorbitan methacrylate, catalyzed by Novozym 435 in t-butanol, reached an approx 68% conversion yield at 50 g/L of 1,4-sorbitan, 5% (w/v) of enzyme content, and a 1∶5 molar ratio of sorbitan to ethyl methacrylate, with a reaction time of 36 h. Using methyl methacrylate as the acyl donor, we achieved a conversion yield of approx 78% at 50 g/L of 1,4-sorbitan, 7% (w/v) of enzyme content, at a 1∶5 molar ratio, with a reaction time of 36 h. Sorbitan methacrylate synthesis using vinyl methacrylate as the acyl donor was expected to result in a superior conversion yield at 3% (w/v) of enzyme content, and at a molar ratio greater than 1∶2.5. Higher molar ratios of acyl donor resulted in more rapid conversion rates. Vinyl methacrylate can be applied to obtain higher yields than are realized when using ethyl methacrylate or methyl methacrylate as acyl donors in esterification reactions catalyzed by Novozym 435 in organic solvents. Enzyme recycling resulted in a drastic reduction in conversion yields.     

Preparation of styrene-(meth)acrylate copolymers in the presence of 1-nitroso-2-naphtholatocobalt(III)

Preparation of styrene-methyl methacrylate, styrene-butyl methacrylate, and styrene-butyl methacrylate copolymers by pseudolive radical polymerization was studied.     

Synthesis of graft copolyimides via controlled radical polymerization of methacrylates with a polyimide macroinitiator

The atom-transfer radical polymerization of methyl methacrylate and tert-butyl methacrylate with a polyimide multicenter macroinitiator in the presence of a CuCl-2,2′-bipyridine catalytic system is investigated. The kinetic features of the process, the molecular-weight characteristics of the formed side chains, and the post-polymerization of methyl methacrylate with graft polyimides containing polymethacrylate side chains are studied. The conditions of controlled polymerization yielding graft copolyimides with narrowly dispersed living poly(methyl methacrylate) or poly(tert-butyl methacrylate) side chains of variable lengths are determined.