Bi0.5Ba0.5FeO3 陶瓷的电性能及阻抗分析

以传统的固相反应法制备了Bi_0.5Ba_0.5FeO₃陶瓷,并采用X射线衍射仪、扫描电子显微镜、直流阻温测试仪和交流阻抗分析仪测试了Bi_0.5Ba_0.5FeO₃陶瓷的微结构和电性能.分析结果表明:Bi_0.5Ba_0.5FeO₃陶瓷具有立方钙钛矿结构,颗粒尺寸约1.0 μm;在16—280 ℃范围内,Bi_0.5Ba_0.5FeO₃陶瓷表现出明显的负温度系数热敏效应,其热敏常数、活化能分别为6490 K及0.558 eV;介电温谱揭示,在280 ℃下Bi_0.5Ba_0.5FeO₃陶瓷材料没有出现相变行为.对于交流阻抗谱,采用3个串联的RQ(R与Q为并联)等效部件来拟合分析,拟合结果表明拟合数据与实验数据高度匹配,且这3个等效部件分别代表晶界、晶粒和晶壳的贡献.3个部件中,晶粒对陶瓷电阻阻值的影响最大,晶壳贡献次之,晶界最小,且3个部件电阻值都显示出负温度系数效应.在25—115 ℃范围内,电学模量虚部峰频与阻抗虚部峰频始终不匹配,意味着Bi_0.5Ba_0.5FeO₃陶瓷体内部一直表现出局域导电机理. 关键词： 0.5Ba_0.5FeO₃陶瓷')" href="#">Bi_0.5Ba_0.5FeO₃陶瓷 电性能 阻抗分析     

High-temperature impedance spectroscopy of BaFe0.5Nb0.5O3 ceramics doped with Bi0.5Na0.5TiO3

Bi_0.5Na_0.5TiO₃ (BNT)-doped BaFe_0.5Nb_0.5O₃ (BFN) ceramics were synthesized by a two-step solid-state reaction. Temperature dependence of dielectric properties measured at different frequencies was investigated over broad temperature and frequency ranges. Impedance spectroscopy and universal dielectric response were employed to study the relaxation behavior and conductivity mechanism of the ceramics in a frequency range from 40 Hz to 100 MHz and a temperature range from 300 K to 800 K. The complex plane impedance data revealed the bulk and grain boundary contributions toward conductivity processes in the form of semicircular arcs. The high-temperature conductivity of ceramics is attributable to thermally activated second ionized oxygen vacancy.     

Improving microwave dielectric properties of La2.98/3Sr0.01(Mg0.5Sn0.5)O3 ceramics with CuO additive

The microwave dielectric properties of CuO-doped La_2.98/3Sr_0.01(Mg_0.5Sn_0.5)O₃ ceramics were investigated with a view to their application in microwave devices. CuO-doped La_2.98/3Sr_0.01(Mg_0.5Sn_0.5)O₃ ceramics were prepared by the conventional solid-state method. The X-ray diffraction patterns of CuO-doped La_2.98/3Sr_0.01(Mg_0.5Sn_0.5)O₃ ceramics exhibited no significant variation of phase with sintering temperature. By adding 0.75 wt.% CuO, a dielectric constant of 20.07, a quality factor (Q × f) of 63,000 GHz, and a temperature coefficient of resonant frequency τ_f (−77.0 ppm/°C) were obtained when La_2.98/3Sr_0.01(Mg_0.5Sn_0.5)O₃ ceramics were sintered at 1500 °C for 4 h.     

X-Ray diffraction and Raman spectroscopy studies of superlattices BaTiO3/(Ba0.5,Sr0.5)TiO3/SrTiO3

The structural characteristics of the BaTiO₃/(Ba_0.5,Sr_0.5)TiO₃/SrTiO₃ superlattice on a (001) MgO substrate have been studied using X-ray diffraction. The modulation period and unit cell parameters of layers forming the superlattice have been measured. The sizes of coherent scattering regions and average microstrains in the direction perpendicular to the surface have been estimated. The obtained characteristics are compared to those of the two-layer BaTiO₃/(Ba_0.5,Sr_0.5)TiO₃ superlattice. The Raman spectra demonstrate a substantial shift of the soft E(TO) mode in the three-layer superlattice as compared to the position in the two-layer superlattice. The effects observed are associated with a substantial increase in the temperature of the phase transition of the three-layer superlattice to the paraelectric phase.     

Tunable Ba0.5Sr0.5TiO3 film bulk acoustic resonators using SiO2/Mo Bragg reflectors

Tunable and switchable Ba 0.5 Sr 0.5 TiO 3 film bulk acoustic resonators（FBARs） based on SiO 2 /Mo Bragg reflectors are explored,which can withstand high temperature for the deposition of Ba x Sr 1 x TiO 3（BST） films at 800 C.The dc bias-dependent resonance may be attributed to the piezoelectricity of the BST film induced by an electrostrictive effect.The series resonant frequency is strongly dc bias-dependent and shifts downwards with dc bias increasing,while the parallel resonant frequency is only weakly dc bias-dependent and slightly shifts upwards at low dc bias（ 45 V） while downwards at higher dc bias.The calculated relative tunability of shifts at series resonance frequency is around 2.3% and the electromechanical coupling coefficient is up to approximately 8.09% at 60-V dc bias,which can be comparable to AlN FBARs.This suggests that a high-quality tunable BST FBAR device can be achieved through the use of molybdenum（Mo） as the high acoustic impedance layer in a Bragg reflector,which not only provides excellent acoustic isolation from the substrate,but also improves the crystallinity of BST films withstanding higher deposition temperature.     

The Field Effect in a Metal–Ferroelectric–Semiconductor System of Multilayer Ferroelectric Films with Various Structure Types

The ability to grow the interfacial defect-poor Sr_0.5Ba_0.5Nb₂O₆ + Ba_0.2Sr_0.8TiO₃ and Ba_0.8Sr_0.2TiO₃ + Ba_0.4Sr_0.6TiO₃ ferroelectric films onto the doped silicon substrates is discussed. A study of piezo-response via the quasi-static method (using the electrode area of 0.07 mm²) reveals that heterostructures possess an initial polarized ferroelectric state with a spontaneous polarization vector perpendicular to the substrate at any type of Si conductivity. The polarized state is established to refer to two-dimension stresses in the ferroelectric, which is tunable through a preprepared Ba_xSr_{1 – x}TiO₃ onto a sublayer substrate as well as to a thickness of this sublayer. Polarization switching in Sr_0.5Ba_0.5Nb₂O₆/Si and Ba_0.8Sr_0.2TiO₃/Si heterostructures under the external field arises at only using the barium–strontium titanate sublayer predeposited onto silicon. A 15% decrease in switching polarization in Ba_0.8Sr_0.2TiO₃/Ba_0.4Sr_0.6TiO₃/Si structures is observed after 500 h.     

Ba1-xSrxTiO3及Ba0.6-xPbxSr0.4TiO3陶瓷的制备和介温特性研究

用固相反应法制备了Ba_1-xSr_xTiO₃(BST)及Ba_0.6-xPb_xSr_0.4TiO₃(BPST)陶瓷,通过XRD,FESEM和拉曼谱分析了Pb掺杂对Ba_0.6Sr_0.4TiO₃样品的晶格、相变及表面形貌的影响.测试了BST及B 关键词： BST BPST 弥散相 介温特性     

Dielectric characteristics and polarization response of lead-free ferroelectric (Bi0.5Na0.5)0.94Ba0.06TiO3-P(VDF-TrFE) 0-3 composites

Bismuth sodium barium titanate/poly(vinylidene fluoride-trifluoroethylene) 70/30 [(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃-P(VDF-TrFE)] 0-3 composites were prepared by a hot-press method for different volume fractions of (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ ceramic powder in a P(VDF-TrFE) 70/30 copolymer matrix. The relative permittivity and dielectric loss of the composites increased with increase in the volume fraction of the ceramics, which well follows the Bruggeman model. The polarization responses of the composites were strongly dependent on the ceramic volume fraction. The composites with a higher ceramic volume fraction showed an increase in remanent polarization. At room temperature, a 0.3(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃-0.7P(VDF-TrFE) composite showed a relative permittivity ε_r=30, remanent polarization and coercive field      

Hopping type of conduction in (Na0.5Bi0.5)ZrO3 ceramic

Polycrystalline sample with (Na_0.5Bi_0.5)ZrO₃ (NBZ) stoichiometry was prepared using a high-temperature solid-state reaction technique. X-ray diffraction (XRD) analyses indicate the formation of a single-phase perovskite-type orthorhombic structure. AC impedance plot is used as tool to analyse the electrical behaviour of the sample as a function of temperature at different frequency. The AC impedance studies revealed the presence of grain boundary effect and evidence of a negative temperature coefficient of resistance (NTCR) character. Pseudo Cole-Cole and complex electric modulus analyses indicated non-Debye-type dielectric relaxation. The AC conductivity obeys the universal power law. The pair approximation type correlated barrier hopping (CBH) model explains the universal behaviour of the s exponent. The apparent activation energy to the conduction process and minimum hopping distance are discussed.     

Rietveld refinement, microstructure, conductivity and impedance properties of Ba[Zr0.25Ti0.75]O3 ceramic

In this work, we report the Rietveld refinement, microstructure, conductivity and impedance properties of Ba[Zr_0.25Ti_0.75]O₃ ceramic synthesized by solid state reaction. This ceramic was characterized by X-ray diffraction, Rietveld refinement, scanning electron microscopy and energy dispersive X-ray spectrometry. Impedance spectroscopy analyses reveals a non-Debye relaxation phenomenon being its relaxation frequency moving toward to positive side with increase of temperature. A significant shift in impedance loss peaks toward higher frequency side indicates conduction in material and favoring the long range motion of mobile charge carriers. The frequency dependent ac conductivity at different temperatures indicates that the conduction process is thermally activated. The variation of dc conductivity exhibited a negative temperature coefficient of resistance behavior. The ac conductivity data are used to evaluate the density of states at Fermi level and activation energy of this ceramic. The dc electrical and thermal conductivities of grain and grain boundary have been discussed.     

Dielectric properties and electrical conduction of La2O3-doped (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramics

La₂O₃ (2 wt%)-doped (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (abbreviated as BNBT6) lead-free piezoelectric ceramics were synthesized by conventional solid-state reaction. X-ray diffraction (XRD) patterns indicated that La₂O₃ has diffused into the lattice of BNBT6 ceramics and formed a solid solution with a pure perovskite structure. Addition of La₂O₃ decreased the piezoelectric properties and electrical conductivity. It was used to study the electrical conductivity of the La₂O₃-doped BNBT6 lead-free piezoelectric ceramics combined with electrical modulus and impedance plots at the temperature range over 788–873 K. The values of activation energy derived from the electrical impedance and modulus were found to be 0.51 and 0.50 eV, respectively. The discrepancy between activation energy of relaxation frequency and the activation energy (0.25 eV) of dc electrical conductivity might have been due to a short-range migration or hopping of single ionized oxygen vacancy and a long-range migration or hopping of charge carriers over the whole disordered system, respectively.     

Effect of the film thickness on the impedance behavior of sol–gel Ba0.6Sr0.4TiO3 thin films

Perovskite Ba_0.6Sr_0.4TiO₃ sol–gel thin films with different thicknesses are fabricated as MFM configuration to study the effect of the film thickness on the dielectric relaxation phenomenon and the ionic transport mechanism. The frequency dependent impedance, electric modulus, permittivity and AC conductivity have been investigated in this context. Z? plane for all the tested samples shows two regions, corresponding to the bulk mechanism and the distribution of the grain boundaries–electrodes process. Electric modulus versus frequency plots reveal non-Debye relaxation peaks. The observed decrease in both the impedance and permittivity with the increase in film thickness is attributed to the grain size effect. The frequency dependent conductivity plots show three regions of conduction processes, i.e. low-frequency region due to DC conduction, mid-frequency region due to translational hopping motion and high-frequency region due to localized hopping and/or reorientational motion.     

Thermal, electrical, and electrochemical properties of Lanthanum-doped Ba0.5Sr0.5 Co0.8Fe0.2O3-δ

Crystal structure, thermogravimetry (TG), thermal expansion coefficient (TEC), electrical conductivity and AC impedance of (Ba_0.5Sr_0.5)_1-xLa_xCo_0.8Fe_0.2O_3-δ (BSLCF; 0.05?x?0.20) were studied in relation to their potential use as intermediate temperature solid oxide fuel cell (IT-SOFC) cathode. A single cubic pervoskite was observed by X-ray diffraction (XRD). The TEC of BSLCF was increasing slightly with the increasing content of La, and all the compounds showed abnormal expansion at high temperature. Proved by the TG result, it was associated with the loss of lattice oxygen. The electrical conductivity, which is the main defect of Ba_0.5Sr_0.5 Co_0.8Fe_0.2O_3-δ (BSCF), was improved by La doping, e.g., the compound of x=0.20 demonstrated a conductivity of σ=376 S cm⁻¹ at 392 °C. The increase of electrical conductivity resulted from the increased concentration of charge carrier induced by La doping. In addition, the AC impedance revealed the better electrochemical performance of BSLCF. For example, at 500 °C, the sample with composition x=0.15 yielded the resistance values of 2.12 Ω cm², which was only 46% of BSCF.     

Ferroelectric-relaxor behavior of (Na0.5K0.5)NbO3-based ceramics

We report that ferroelectric-relaxor behavior is induced by doping of SrO and TiO₂, or BaO and TiO₂ into classic ferroelectric (Na_0.5K_0.5)NbO₃. It is found that [(Na_0.5K_0.5)_0.9Sr_0.1](Nb_0.9Ti_0.1)O₃ ceramics exhibit a pronounced ferroelectric-relaxor behavior, comparable to that of [(Na_0.5K_0.5)_0.9Ba_0.1](Nb_0.9Ti_0.1)O₃ ceramics. Our results indicate that the relaxor behavior is closely related to the appearance of micropolar regions in these systems. The relaxor behavior should arise from the dynamic response of micropolar clusters. Raman spectra of [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics measured in the wavenumber range from 100 to 1200 cm⁻¹ confirm that the first order scattering is dominant in phonon bands should result from both short-range ordered region (micropolar regions) and disordered matrix. The frequency dependence of dielectric permittivity measurements show that the relaxor behavior of SrO and TiO₂, or BaO and TiO₂ doped (Na_0.5K_0.5)NbO₃ ceramics is not a Debye type in the radio frequency range.     

Fabrication and electrical properties of sol-gel-derived Ba0.8Sr0.2TiO3 ferroelectric films from a 0.05-M spin-on solution

Barium strontium titanate (Ba_0.8Sr_0.2TiO₃) films with good ferroelectricity have been obtained by a developed sol-gel processing, using a 0.05-M spin-on solution. X-ray diffraction and Raman spectroscopy investigations showed that the Ba_0.8Sr_0.2TiO₃ film exhibited a tetragonal structure at room temperature. Field-emission scanning electron microscopy measurements revealed that large columnar grains with the size of 100 to 200 nm in the film were formed from the highly dilute spin-on solution with layer-by-layer homoepitaxy. Electrical measurements for the prepared Ba_0.8Sr_0.2TiO₃ film showed a remnant polarization of 3.5 μC/cm², a coercive field of 53 kV/cm, two distinctive phase transitions, lower dissipation factor, and good insulating properties. These results indicate the sol-gel-derived Ba_0.8Sr_0.2TiO₃ film from a 0.05-M solution is suitable for uncooled infrared detector applications. Received: 19 August 1999 / Accepted: 11 October 1999 / Published online: 1 March 2000     

Thermal diffusivity and electrical conductivity in fast ion conducting composites: A correlation

The thermal diffusivity and electrical conductivity have been measured for two ion conducting polyethylene oxide (PEO) based polymer–ceramic composites viz. (PEO:NH₄I) + xAl₂O₃, (PEO:LiBF₄) + xBa_0.70Sr_0.30TiO₃ and two solid–solid composites viz. AgI + xAl₂O₃, AgI +xBa_0.70Sr_0.30TiO₃. The thermal diffusivity has been measured by the novel photoacoustic technique while the electrical conductivity has been measured by impedance spectroscopy technique using complex impedance plots. The pattern of variation in the electrical conductivity (σ) vs. composition plot and that in the thermal diffusivity (α_s) vs. composition plot are similar. Interestingly, the correlation between α_s and σ is not only qualitative but is quantitative as well in the sense that the ratio (α_s / σ) remains constant for all the samples within the same system (though their conductivities are different) similar to Wiedmann–Franz law applicable to metallic conductors.     

High-temperature complex impedance and modulus spectroscopic studies of doped Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-BaTiO<Subscript>3</Subscript> ferroelectric ceramics

Lead-free Na_0.5Bi_0.5TiO₃ (NBT) and (1 ? x)Na_0.5Bi_0.5TiO₃ + xBaTiO₃ with x = 0.1 and 0.2 (where x = 0.1 and 0.2 are named as NBT1 and NBT2, respectively), (1 ? y)Na_0.5Bi_0.5TiO₃ + yBa_0.925Nd_0.05TiO₃ with y = 0.1 and 0.2 (where y = 0.1 and 0.2 are named as NBT3 and NBT4, respectively)-based relaxor ferroelectric ceramics were prepared using the sol-gel method. The crystal structure was investigated by X-ray diffraction (XRD) at room temperature (RT). The XRD patterns confirmed the presence of the rhombohedral phase in all the samples. The electrical properties of the present NBT-based samples were investigated by complex impedance and the modulus spectroscopy technique in the temperature range of RT–600 °C. The AC conductivity was found to increase with the substitution of Ba²⁺ ions to the NBT sample whereas it significantly decreased with the addition of Nd³⁺ ions. The more anion vacancies in Ba-added samples and the lower anion vacancies in Nd-added samples were found to be responsible for higher and lower conductivities, respectively.     

Ba0.5Sr0.5TiO3电子结构和光学性质的第一性原理研究

利用第一性原理研究了Ba_0.5Sr_0.5TiO₃的能带结构和光学性质.结果表明,导带和价带都来源于钛原子3d轨道和氧原子2p轨道的杂化.导带主要由钛原子的3d轨道贡献,价带主要由氧原子的2p轨道贡献.吸收系数为10⁵ cm^-1量级,且吸收主要集中在低能区.折射率为n（0）=2.1,结果与实验符合. 关键词： 第一性原理 能带结构 光学性质     

Bi0.5Ba0.5Fe0.5Ti0.49Nb0.01O3热敏陶瓷的微结构和电学性能研究

采用固相合成工艺,制备了Bi_05Ba_05Fe_05Ti_049Nb_001O₃（BBFTN）热敏陶瓷,借助X射线衍射仪、扫描电子显微镜、阻温测试仪和交流阻抗谱考察其微结构、直流电阻、介电特性、阻抗和电学模量方面的电学性能. 结果表明：BBFTN材料依然为立方钙钛矿结构,平均晶粒尺寸约为10 μm,晶格常数相对于BaTiO₃的晶格常数有所变大;室温电 关键词： 05Ba_05Fe_05Ti_049Nb_001O₃')" href="#">Bi_05Ba_05Fe_05Ti_049Nb_001O₃ 微结构 电学性能     

Anisotropic electrical properties of Bi0.5(Na0.75K0.25)0.5TiO3 ceramics fabricated by reactive templated grain growth (RTGG)

We have fabricated lead-free Bi_0.5(Na_0.75K_0.25)_0.5TiO₃ (BNKT) ceramics by a conventional process (CP) and reactive templated grain growth (RTGG) methods. The effect of grain orientation on structure, dielectric, complex impedance and electrical properties was investigated. The phase formation and grain morphology of BNKT ceramics were examined by X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. High dielectric constant and low dielectric loss was observed for grain oriented (textured) BNKT ceramics. Complex impedance, temperature dependent ac and dc conductivity were performed to explore the conduction behavior of the prepared BNKT ceramics.