Hollow microspheres with covalent‐bonded colloidal and polymeric shell by Pickering emulsion polymerization

Hollow microspheres with SiO₂/polymer binary shell were fabricated from Pickering emulsion stabilized solely by methacryloxypropyltrimethoxysilane‐modified SiO₂ particles, and were characterized by optical microscopy, scanning electron microscopy, Fourier transformation infrared spectrum, thermogravimetric analysis (TGA), and energy dispersive X‐ray spectroscopy. The microspheres were templated by the Pickering droplets and the inner structure was affect by the proportion of crosslinking reagent. TGA result indicated that 60.3% of polymer in the shell was connected with SiO₂ by covalent bond which was formed by copolymerization of styrene and the reactive C?C group on SiO₂ stabilizer. Copyright © 2011 John Wiley & Sons, Ltd.     

Pickering emulsion polymerization of graphene oxide-stabilized styrene

Polystyrene (PS) particles were prepared via Pickering emulsion polymerization using graphene oxide (GO) as the stabilizer. The results show that pH is an important factor in the stability of Pickering emulsions. The effects of two different phase initiators, the water phase initiator potassium persulfate and the oil phase initiator azobisisobutyronitrile, on the morphology of PS particles in Pickering emulsion polymerization had been investigated in detail. Wrinkled particles were prepared using the water phase initiator, and spherical particles were prepared using the oil phase initiator. In addition, hexadecane was used as the auxiliary stabilizer in the polymerization, which narrowed the diameter distribution of the PS spheres, and the hollow PS spheres were fabricated. The size of the GO particles also influenced the final morphology of the particles. Nano-sized polymer particles were grafted onto the surface of micro-sized GO. Small GO particles were suitable for Pickering emulsion polymerization to prepare the composite particles. The thermogravimetric analysis of the prepared particles confirmed that they were PS/GO composite particles, which could have a wide range of potential applications, such as in catalysts, sensors, environmental remediation, and energy storage.     

Study of structure properties of organized silica sorbents synthesized on polymeric templates

Mesoporous silica materials were synthesized by applying Pluronic type polymers as pore creating agents. The composition of a reacting mixture and the process conditions were changed in a synthesis procedure. These changes differentiated the characteristics of porous structure of obtained sorbents. The parameters characterizing the pore structure were estimated and the changes of pore arrangement of obtained materials being a result of different synthesis conditions were investigated. The small-angle XRD results indicate that F cubic structure was formed what confirms the cage-like ordering of the synthesized silicas.     

Synthesis of ZnO/polystyrene composites particles by Pickering emulsion polymerization

ZnO/polystyrene composite particles were synthesized by Pickering emulsion polymerization. ZnO nanoparticles were first prepared by reaction of zinc acetate and sodium hydroxide in ethanol medium. Then different amount of styrene monomer was emulsified in water in the presence of ZnO nanoparticles either by mechanical stirring or by sonication, followed by polymerization of styrene. Two kinds of initiators were used to start the polymerization, azobisisobutyronitrile (AIBN) and potassium persulfate (KPS). The X-ray diffraction pattern verified the crystal structure of ZnO and FT-IR spectra evidenced the existence of ZnO and polystyrene (PS) in ZnO/polystyrene composite particles. Different morphologies were observed for the composite particles when using different initiators. From TEM photographs, AIBN-initiated system produced mainly core-shell composite particles with PS as core and ZnO as shell, while KPS-initiated system showed both composite particles and pure PS particles. Two schemes of reaction mechanism were proposed to explain the morphologies accordingly. Both systems of composite particles showed good pH adjusting ability.     

Synthesis and properties of polymeric and organo-inorganic amphiphilic sorbents molecularly imprinted with cholesterol

Polymeric and organo-inorganic sorbents molecularly imprinted with cholesterol were synthesized to create selective hemosorbents for efferent therapy of hypercholesterlemia. These sorbents are block copolymers of 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate and granulated organo-inorganic sorbents in which the imprinting was performed in the layer of the above copolymer on the surface of selenium (Se) nanoparticles stabilized with polyvinyl pyrrolidone. The physicochemical and sorption properties of the sorbents were studied.     

Strontium(II) sorption by complexing polymeric sorbents with various structures

Optimal conditions for strontium(II) sorption by new complexing polymeric sorbents (CPSs) from aqueous solutions were studied, namely, optimal solution acidity (pH_opt), pH of 50% sorption (pH₅₀), and optimal time and temperature of quantitative sorption. The strontium(II) sorption capacities of the test sorbents (SCSs) were determined, and sorption isotherms were plotted. The strontium(II) sorption parameters determined were used to recognize the most efficient CPSs.     

Fabrication of macroporous foam and microspheres of polystyrene by Pickering emulsion polymerization

Poly(styrene-co-methacrylic acid) (PS-co-MAA) particles were synthesized via surfactant-free emulsion polymerization and then used as particulate emulsifiers for preparation of Pickering emulsions. Our results showed that adjusting the solution pH can tune the wettability of PS-co-MAA particles to stabilize either water-in-oil (W/O) or oil-in-water (O/W) Pickering emulsions. Stable W/O emulsions were obtained with PS-co-MAA particles at low pH values due to their better affinity to the dispersed oil phase. In contrast, increasing the pH value significantly changed the stabilizing behavior of the PS-co-MAA particles, leading to the phase inversion and formation of stable O/W emulsions. We found that the oil/water ratio had a significant influence on pH value of the phase inversion. It decreased with decreasing the oil/water ratio, and no phase inversion occurred when the styrene volume fraction reduced to 10 %. Additionally, macroporous polystyrene (PS) foam and PS microspheres were obtained via polymerization of Pickering high internal phase emulsion (Pickering HIPE) and O/W Pickering emulsion, respectively.     

Synthesis of microcapsules with polystyrene/ZnO hybrid shell by Pickering emulsion polymerization

Polystyrene/zinc oxide (ZnO) hybrid microcapsules having polystyrene as inner shell and ZnO nanoparticles as outer shell were synthesized by Pickering emulsion polymerization method. ZnO nanoparticles were used to form the colloidosomes that worked as the polymerization vessels, where both styrene monomer and crosslink agent were polymerized together. Fourier transform infrared spectra and thermogravimetric thermograms showed the existence of ZnO and polystyrene in the shell of hybrid microcapsules. The hollow structure and the different morphology under various conditions were also observed by field emission scanning electron microscopy. In addition, the shell thickness of hybrid microcapsules increased as the monomer concentration increased. The photoluminescence property of PS/ZnO hybrid microcapsules could be maintained without any noticeable variation by comparing with the pure ZnO particles. It could be reasonably deduced that hybrid hollow microspheres with multifarious polymer as inner shell and ZnO nanoparticles as outer shell would be produced for many applications.     

Diverse macroporous spheres synthesized by multiple emulsion polymerization for protein analyses

Hydrophilic and hydrophobic spheres (1-2 mm) with macropores (50 μm) were synthesized by SDS stabilized O/W/O and W/O/W emulsion polymerization, respectively. The hydrophilic spheres were functionalized with trypsin for protein digestion and on-line integrated with the hydrophobic spheres for the subsequent sample clean-up and enrichment with almost no back pressure.     

Polyurethane acrylate microgel synthesized by emulsion polymerization using unsaturated self-emulsified polymer

Polyurethane (PU) acrylate microgels were obtained by emulsion polymerization of self-emulsified PU acrylate terminated by 2-hydroxyethyl methacrylate without any extra emulsifier and crosslinker. Moreover, the PU acrylate was also used as stabilizer and crosslinker to synthesize poly(methyl methacrylate) (PMMA)–PU composite microgels via emulsion polymerization, which provided a new method to synthesize PU microgels and their composite microgels. The kinetics of microgel synthesis was studied by gel permeation chromatography. The dynamic rheological behaviors indicated that a crosslinked structure was formed. The frequency dependency of the loss tangent and complex viscosities showed strong relationships with the microgel structure. Those microgels with rigid PMMA core showed higher ability to slide than the soft PU acrylate microgel, which had influence on the changing of loss tangent with frequency. All the microgels swollen in tetrahydrofuran exhibited high viscosities and strong shear-thinning behaviors. As a sort of flexible microgel, the PU microgel was able to form a coherent film at room temperature, which was distinct from hard microgels.     

Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Porous/magnetic molecularly imprinted polymers (PM‐MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross‐linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as‐made PM‐MIPs. The characterization demonstrated that the PM‐MIPs were porous and magnetic inorganic–polymer composite microparticles with magnetic sensitivity (M_s = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0–8.0). The PM‐MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM‐MIPs was well described by pseudo‐second‐order kinetics, indicating that the chemical process could be the rate‐limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM‐MIPs for target LC. Moreover, the PM‐MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles.     

Comparison of binding behavior for molecularly imprinted polymers prepared by hierarchical imprinting or Pickering emulsion polymerization

The aim of this study was the evaluation of the binding performances and selectivity of molecularly imprinted beads prepared toward several penicillins (i) by hierarchical bulk polymerization in the pores of template‐grafted silica microbeads (hMIPs) and (ii) by Pickering emulsion polymerization in the presence of template‐decorated silica nanobeads (pMIPs). 6‐Aminopenicillanic acid was chosen as the common fragmental mimic template. Both approaches produced micron‐sized polymeric beads with good recognition properties toward the target ligands whereas the selectivity pattern appeared quite different. The polymer prepared by the Pickering emulsion approach showed binding properties similar to imprinted beads prepared by hierarchical approach. Equilibrium binding constants changed their values from 0.1–0.2 × 10⁶ (hMIPs) to 0.2–0.6 × 10⁶ M^?1 (pMIPs), while the binding site densities changed from 3.7–4.8 (hMIPs) to 0.3–0.55 μmol/g (pMIPs). Compared to the hierarchical polymerization, Pickering emulsion polymerization represents a more practical approach when a template mimic needs to be used.     

Noncovalent modification of self-assembled functionalized COF by PNIPAM and its properties of Pickering emulsion

Based on a facile and universal method using noncovalent bonding, here, polymer-modified covalent organic framework materials (COFs) were rapidly prepared. PNIPAM-modified COF (COF-PNIPAM) was synthesized by electrostatic self-assembly between COF prepared by low-cost melamine and terephthalaldehyde and carboxyl-terminated poly(N-isopropylacrylamide) (PNIPAM) prepared via reversible addition-fragmentation chain transfer polymerization. The carboxyl-terminated PNIPAM was characterized by Gel Permeation Chromatography and Ultraviolet and Visible Spectroscopy (UV–vis). COF and COF-PNIPAM were characterized by Fourier Transform Infrared Spectroscopes, Scanning Electron Microscope, Transmission Electron Microscope, X-Ray Diffractomer (XRD), and Brunner-Emmet-Teller (BET) measurements. The results showed that the COF-PNIPAM was successfully prepared. The Pickering emulsion properties of the COF-PNIPAM in a water-to-toluene mixed system were studied, and when the water-to-oil ratio is 2:1, a stable emulsion can be obtained. However, the results show that the PNIPAM chains of COF-PNIPAM nearly lose their temperature responsiveness.     

Fabrication and performance of microencapsulated phase change materials with hybrid shell by in situ polymerization in Pickering emulsion

Microencapsulated phase change materials (MePCMs) using melamine–formaldehyde resin/SiO₂ as shell were investigated in this paper. Organically modified SiO₂ particles were employed to stabilize Pickering emulsion, and in situ polymerization of melamine and formaldehyde was carried out to form hybrid shell. The performances of resultant MePCMs with hybrid shell were investigated comparatively with the MePCMs with polymer shell. SiO₂ particles raise the microencapsulation efficiency by improving the stability of emulsion and providing a precipitation site for melamine–formaldehyde resin. Also, the mechanical strength, thermal reliability, and anti‐osmosis performance of MePCMs were improved significantly by SiO₂ particles in the shell. Our study shows that Pickering emulsion is a simple and robust template for MePCMs with polymer‐inorganic hybrid shell. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of polymeric nanocapsules by radical UV‐activated interface‐emulsion polymerization

A new methodology is reported that allows a better control of the synthesis of polymeric core–shell nanocapsules. These nanocapsules were made of biocompatible polymers, obtained from poly(ethylene glycol)diacrylate and poly(ethylene glycol) methyl ether methacrylate, and were used as carrier for curcumin as therapeutic agent. The impact of manufacturing factors (time of sonication, time of UV irradiation, and type of monomer) was investigated in relation to the average size of nanocapsules, their distribution, shape, composition, stability, and their capability to deliver curcumin. We successfully synthesized core–shell nanocapsules in various sizes, ranging from 80 nm to 300 nm, by acting either on the process conditions or on the composition of the monomer mixture. This wide range of sizes makes the method here proposed very promising for the production of nanocarriers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3357–3369     

Study on the PMMA/GO nanocomposites with good thermal stability prepared by in situ Pickering emulsion polymerization

Graphene oxide (GO) is used as a stabilizer in the Pickering emulsion polymerization of methyl methacrylate (MMA) to prepare PMMA/GO nanocomposites. Transmission electron microscope studies of the emulsion polymerization products showed that the average diameter of nanocomposite particles was about 150 nm, the transparent GO flakes covered the surface of the particles, and were well dispersed in polymer matrix. The influence of GO on the thermal stability of PMMA was investigated by thermogravimetry analysis and differential scanning calorimetry. The results showed that the thermal stability and the glass transition temperature (T _g) of PMMA/GO nanocomposites were improved obviously compared with PMMA. The apparent activation energy (E _a) for the degradation process of PMMA/GO nanocomposites was evaluated by Kissinger method, which indicated that their E _a s were much higher than those of PMMA both in nitrogen and air atmosphere.     

Water‐compatible halloysite‐imprinted polymer by Pickering emulsion polymerization for the selective recognition of herbicides

A water‐compatible molecularly imprinted polymer was prepared by Pickering emulsion polymerization using halloysite nanotubes as stabilized solid particles. During polymerization, we used 4‐vinylpyridine as monomer, divinylbenzene as cross‐linking agent, toluene as porogen, 2,2‐azobisisobutyronitrile as initiator, 2,4‐dichlorophenoxyacetic acid as template to form the oil phase, and Triton X‐100 aqueous solution to form the water phase. The halloysite nanotubes molecularly imprinted polymer was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Kinetic and equilibrium bindings were also employed to evaluate the adsorption properties of the imprinted polymer. The imprinted polymer showed better selectivity, more rapid kinetic binding (60 min) for 2,4‐dichlorophenoxyacetic acid in pure water compared with rebinding in toluene. The imprinted polymer was used as a sorbent to enrich and separate 2,4‐dichlorophenoxyacetic acid from water, and was detected by high‐performance liquid chromatography with UV detection.     

Control of microstructural properties in emulsion polymerization systems

Control strategies for the simultaneous control of microstructural properties of copolymer latexes (copolymer composition and molecular weight distribution) are presented. For linear polymers, on-line control strategies based on calorimetric measurements allowed to produce styrene/n-butyl acrylate emulsion polymers of predefined copolymer compositions and MWDs. The strategy failed for nonlinear polymers because the polymer produced at a certain process time might later in the process become active varying its molecular weight. Alternative open-loop control policies were developed for nonlinear polymers. These strategies required a mathematical model of the process that is used in an off-line optimization to determine the trajectories of the manipulated variables (feed flow rates of monomer and CTA) that allow producing the desired copolymers. The implementation of the open-loop control allowed the production of nonlinear MMA/n-BA emulsion copolymers of well-defined copolymer composition and MWD.     

Pickering emulsion polymerization kinetics of styrene: Comparison of bare and surface modified SiO2 nanoparticles

A step towards the understanding of some mechanistic events occurring in the styrene Pickering emulsions, using a SiO₂ dispersion, is presented. Polymerizations at 80°C with different levels of a water soluble initiator were performed. The emulsion polymer content was ca. 15% with conversions close to 90%. With conversion and particle size measurements, the particle density was estimated for bare and surface modified SiO₂ particles. Then, the average number of radicals per particle was inferred, yielding a pseudo-bulk type polymerization. It was found that bare SiO₂ nanoparticles do not participate in the nucleation mechanism; however, they, along with the initiator, promote an enhanced oligomer coagulation. On the other hand, the hexadecyltrimethylammonium bromide modified SiO₂ nanoparticles do participate in the nucleation and coagulation mechanisms, yielding more stable and smaller poorly-covered polymer particles. This approach allowed untangling some events such as: particle nucleation, radical entry to particles, particle density, coagulation and vitreous and Trommsdorff effects.