N-(Chlorodimethylsilyl)methyl anilides: synthesis and structure

N-(Chlorodimethylsilyl)methyl anilides of formula RC(O)N(C₆H₄X)CH₂SiMe₂Cl (R = Me, Ph; X = H, Me, Cl) were obtained by the reaction of N-TMS-containing anilides with ClCH₂Si(Hal)Me₂ (Hal = F, Cl). The silicon atom in these compounds is pentacoordinate according to the results of NMR and X-ray diffraction analysis.     

The synthesis of 2-ketopiperazine acetic acid esters and amides from ethylenediamines with maleates and maleimides

The reaction of substituted ethylenediamines with various fumarates, maleates, and maleimides to form substituted ketopiperazine acetic acid esters and amides was investigated. This method affords a straightforward, high yield approach to a variety of potential peptidomimetics and can yield surprising results with regard to regio- and stereoselectivity.     

An improved procedure for the synthesis ofp-(dichlorosulfamoyl)benzoic acid (Halazone)

Oxidation of Dichloramine-T with KMnO₄ in mild alkaline medium affords N,N-dichlorosulfamoylbenzoic acid (Halazone) in high yield with 18–20% chlorine content.

---

Eine verbesserte Vorschrift für die Synthese vonp-(Dichlorsulfamoyl)benzoesäure (Halazon) (Kurze Mitteilung)

Zusammenfassung Die Oxidation von Dichloramin-T mit KMnO₄ ergab unter mild alkalischen Bedingungen N,N-Dichlorsulfamoylbenzoesäure (Halazon) in hohen Ausbeuten mit einem Chlorgehalt von 18–20%.

     

Synthesis,structure, and properties of 2-[(4,6-di-tert-butyl-2,3-dihydroxyphenyl)thio]acetic acid amides

Russian Chemical Bulletin - New potential biologically active derivatives, in which the sterically hindered pyrocatechol moiety is linked through a 2-thioacetyl covalent bridge to a number of...     

A new one-pot synthesis of difluoro(organylsulfinyl)acetic acid esters

A novel single-step method for the synthesis of esters of difluoro(organylsulfinyl)acetic acids, by reacting aromatic compounds with isopropyl chlorosulfinyldifluoroacetate, was developed. The feasibility of transforming the sulfoxide intermediates into corresponding sulfides and sulfones was demonstrated.     

Structure and intramolecular lability of N-(thio)phosphoryl(thio)amides: XIV. Electronic structure and spatial arrangement of N-[diisopropoxy(thio)phosphoryl](thio)benzamides

Semiempirical quantum-chemical calculations of the spatial arrangement and electronic structure of the tautomeric forms of N-[diisopropoxy(thio)phosphoryl](thio)benzamides were carried out by the PM3 method. The most energetically favorable forms were revealed, and the reasons for their stabilization were discussed.     

Kinetics of exchange reactions between substituted benzoic acid amides and aliphatic nitriles

The functional group exchange between benzamides and various nitriles in trifluoroacetic acid solution has been studied to obtain kinetic and thermodynamic reaction parameters. The reactions are suggested to follow a synchronous mechanism.

---

. .

     

Total synthesis of (+)-pederine. A simple synthetic method for N-(1-methoxyalkyl)amides

A mild one-pot method for the synthesis of acyclic N-(1-methoxyalkyl)amides starting from carboxylic acids and methyl imidates had been developed and applied to the total synthesis of the insect poison pederine $\text{1}$.     

Determination of pK(a) of acetic and benzoic acids in pyridine

The pK(a)'s of acetic acid and benzoic acid in pyridine as solvent are found to be 10.1 and 9.8, respectively, at 25 degrees . These results are based on measurements of hydrogen ion activities in mixtures of the acids and their tetrabutylammonium salts. Supplementary studies of differential vapour pressure characteristics of solutions of the acids and the acid-salt mixtures, and conductance of tetrabutylammonium benzoate solutions are also incorporated.     

Precipitation polymerization in acetic acid: synthesis of monodisperse cross-linked poly(divinylbenzene) microspheres

This paper reports two important results with cross-linked precipitation polymerization. (1) Acetonitrile, a substance harmful to human health, is the most commonly used solvent for the synthesis of cross-linked polymeric microspheres by precipitation polymerization. Here, the much safer acetic acid replaced acetonitrile as a solvent in the precipitation polymerization of monodisperse cross-linked poly(divinylbenzene) (PDVB-55) microspheres. Pumpkin-like particles and microspheres were obtained. XPS results displayed a significant amount of double bonds on the surface of the particles. The effect of monomer content, temperature, and initiator amount on the formed particles were studied. For a DVB loading below 1 vol % at 70 degrees C, monodisperse microspheres with smooth surfaces and narrow diameters were successfully obtained. With a DVB loading of 2 vol % and by observing the shapes of particles obtained with three different temperature(60, 70, and 80 degrees C), we found that more spherical particles were obtained at higher temperatures and pumpkin-like particles were obtained at lower temperatures. No significant differences in morphology or the coefficient of variation (CV) of the particles were obtained for different initiator loadings, whereas the particle diameters could be increased with increased initiator concentrations. (2) In order to obtain a better understanding of the formation mechanism of these particles, time-dependent experiments, for the first time, were conducted in a hydrophobic monomer system. By tracing the whole polymerization process, some important results were found. First, with the polymerization time at 70 degrees C, the particle diameters were found to increase from 800 nm to 3.0 microm, the CV displayed a decrease, and the amount of spheres and the spherical evenness of the particle surfaces improved. Second, by quantitatively calculating the particle number from the yields and diameters data, it is found that starting from 3.1% yield or two hours reaction time the total amount of particles in the system is almost a constant (about 9.6 x 10 (8)/L), which means that no homocoagulation occurred and no new particles were generated after nucleation, and there is a linear relation between cubic diameters and yields. These two results give us a distinct impression that particle growth almost comes from capturing of newly formed oligomers. Based on the above results, a scheme for the particle formation is proposed, which shows that that pumpkin-like particles are caused by a prolonged nucleation including the homocoagulation of primary nuclei. The growth of the particles includes two modes, an in situ surface polymerization of monomer and the adsorption of PDVB-55 oligomers. The differences between results in acetonitrile and in acetic acid (higher yields, smaller size, not spherical but pumpkin-like particles in acetic acid) were due to the lower solubilizability of acetic acid which is the so-called proton-containing solvent with the hydrogen bonding structure.     

Derivatives of the N-(pyrid-2-yl)amides of 3-aminocrotonic acid as chelating ligands

New chelating ligands, N-(pyrid-2-yl)amides of 4,4,4-trichloro-3-amino-2-cyanocrotonic acid have been synthesized from N-(pyrid-2-yl)amides of cyanoacetic acid and CCl₃CN. It has been demonstrated that by the action of butylthiodibutylborane they form binuclear boron chelate complexes. Analogous chelates have also been obtained from the N-(pyrid-2-yl)amides of acetoacetic and 4,4,4-trichloro-3-aminocrotonic acids.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, Moscow 117913. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 974–979, April, 1992.     

Polyaniline doped by a new class of dopants,benzoic acid and substituted benzoic acid: synthesis and characterization

This work reports on a new class of dopants, benzoic acid and substituted benzoic acids such as 2‐hydroxybenzoic acid, 2‐chlorobenzoic acid, 4‐nitrobenzoic acid, 2‐methoxybenzoic acid, 3‐methylbenzoic acid, 4‐methylbenzoic acid, 3‐aminobenzoic acid and 4‐aminobenzoic acid, for polyaniline. Benzoic acids can be used to dope polyaniline by mixing benzoic acid (or a substituted benzoic acid) with polyaniline in the common solvent 1‐methyl‐2‐pyrrolidone. Properties of benzoic acid doped polyaniline salts are studied using Fourier transform infra‐red, X‐ray diffraction spectroscopy, scanning electron microscopy, thermogravimetric analysis and conductivity measurements. The conductivity of polyaniline‐benzoic acid salt was found to be high (10⁻² S/cm) when compared to polyaniline‐substituted benzoic acid salts (10⁻³–10⁻⁵ S/cm). Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and ring-chain isomerism of acid chlorides and amides of 2-(2-pyridyl and 2-quinolylcarbonyl) benzoic acids

The reaction of 2-(2 pyridytcarbonyl)benzoic acid with thionyl chloride affords an unexpected product of the intramolecular acylation of the pyridine nitrogen atom, namely, 6,11-dioxo-6,11-dihydrobenzo[blquinotizinium chloride. At the same time, 2-(2-quinotylcarbonyl)benzoic acid forms the expected cyclic acid chloride, namely, 3-(2-gitinotyl)-3-chlorophthalide in this reaction. Both compounds acylate ammonia and primary amines, including those with bulky alkyl groups (tert-butyl, 1-adamantyl, and 1,1,3,3-tetramethylbutyl) with the formation of 2-R-3-hydroxy-3-(2pyridyl- or 2-quinolyl)isoindolines. The protonation of the pyridine nitrogen atom of N-(1,1,3,3-tetramethylbutyl)-2-(2pyridylcarbonyl)benzamide, obtained in the open amide form, is accompanied by the closing of the isoindotinone ring; the deprotonation is accompanied by ring opening.Riga Technical University, Riga LV-1048. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 499–504, April, 1994. Original article submitted March 17, 1994.     

Kobalt(III)-Chelate des Diacetylmonoxim-anils

With diacetylmonoxim anil (Dma) cobalt(III) forms chelates of the types [Co(Dma)(Dma—H)X₂], [Co(Dma—H)₂(C₅H₅N)X], and [Co(Dma—H)₃]. Basing on the visible and infrared spectra, the bonding and the structures of these coordination compounds are discussed. By the reaction between [Co(Dma—H)₂(C₅H₅N)Cl] and C₆H₅MgBr [Co(Dma—H)₂(C₅H₅N)(C₆H₅)] is produced. In this compound the phenyl group is directly bound to cobalt.