咪草烟分子印迹聚合物的制备及其选择性吸附性能的研究

以丙烯酸为聚合单体,TMPTA为交联剂,AIBN为引发剂,咪草烟为模板分子,采用在低温光聚合的方法,制备了对咪草烟分子具有选择性识别能力的分子印迹聚合物．通过IR和HPLC表征,咪草烟分子印迹聚合物对咪草烟分子具有良好的识别作用．     

Determination of traces of fluorine or sulfur by x-ray analysis

New X-ray methods have been developed for the determination of as little as 1 μg of fluorine or as little as 0.1 μg of sulfur. Fluorine as fluoride is precipitated as lanthanum fluoride in 75% ethanol-water mixture and determined by measuring the amount of lanthanum present in the precipitate. Sulfur as sulfate is precipitated as barium sulfate from a barium sulfate saturated 50% ethanol-buffer mixture, using selenate as a coprecipitant, and determined by measuring the amount of sulfur present. Sulfur as sulfide is precipitated as cadmium sulfide and determined by measuring the amount of sulfur or cadmium in the precipitate.     

Macromolecular chemistry and medicine

Macromolecular substances are used in medicine both as materials and as reagents. In the former category polymers serve as replacements for soft tissue, as cardiovascular and orthopedic implants, and as adhesives. When employed as reagents, macromolecules interact with living tissue and play an active part in bodily repair processes.     

三明治式双极膜的制备及其光催化性能

以Cr3+交联羧甲基纤维素钠(CMC)作为阳膜层,戊二醛改性壳聚糖(CS)作为阴膜层,纳米TiO2光催化剂作为双极膜的中间层,在TiO2上涂布光敏剂八羟基喹啉（Oxine）以增强其光催化解离水的性能,制备了三明治式的双极膜（mCMC/TiO2-Oxine/mCS BPM)。 该双极膜在紫外光照射下,具有高的水解离效率,优良的亲水性能,双极膜阻抗小,工作电压低,当工作电流密度达0.12 A/cm2时,电槽工作电压小于5.0 V。     

Controlled release of volatiles under mild reaction conditions: from nature to everyday products

Volatile organic compounds serve in nature as semiochemicals for communication between species, and are often used as flavors and fragrances in our everyday life. The quite limited longevity of olfactive perception has led to the development of pro-perfumes or pro-fragrances--ideally nonvolatile and odorless fragrance precursors which release the active volatiles by bond cleavage. Only a limited amount of reaction conditions, such as hydrolysis, temperature changes, as well as the action of light, oxygen, enzymes, or microorganisms, can be used to liberate the many different chemical functionalities. This Review describes the controlled chemical release of fragrances and discusses additional challenges such as precursor stability during product storage as well as some aspects concerning toxicity and biodegradability. As the same systems can be applied in different areas of research, the scope of this Review covers fragrance delivery as well as the controlled release of volatiles in general.     

Interactions and uses of antisense peptides in affinity technology.

Antisense peptides, amino acid sequences encoded in the antisense strand of DNA, can interact with significant affinity and selectivity with their corresponding sensepeptides. Experimentally, sense-antisense peptide recognition has been observed repeatedly. However, skepticism about the biological relevance of this phenomenon has persisted. This is due in part to the unexpected and somewhat couterintutive nature of the interaction as well as to its non-universality as an empirical observation. Nonetheless, antisense peptides in several cases investigated so far have been used as immobilized ligands for the successful affinity chromatographic separation of native (sense) peptides and proteins. For example, immobilized antisense peptides corresponding to Arg8-vasopressin (AVP) have been used to separate vasopressin from oxytocin chromatographically as well as to affinity capture AVP-receptor complex. These results, together with improved understanding of the general features of amino acid sequence which drive antisense-sense peptide interactions as well as new ideas for making antisense peptides chimeras, are beginning to suggest improved ways to make antisense-related peptides as affinity agents for separation as well as for other biotechnology applications.     

Polylactic acid (PLA) synthesis and modifications: a review

This article reviews various methods of synthesizing polycondensation and ring-opening polymerization and modifying properties of polylactic acid (PLA), which may be used as biomaterials, such as a drug carrier in a drug delivery system, as a cell scaffold and suture in tissue engineering, and as packaging materials in packaging engineering field. Copolymerization of lactide with other monomers or polymers such as malic acid, polyethylene glycol (PEG), polyglycolic acid (PGA), or dextran, as well as blending polylactide with natural derivatives and other methods of modification are discussed. Surface modifications of PLA-type copolymers, such as surface coating, chemical modification, and plasma treatment are described.     

Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

Extraordinary atomic mobility of Au{111} at 80 Kelvin: effect of styrene adsorption

We describe how the presence of styrene, a weakly adsorbed molecule, dramatically restructures the Au{111} surface at temperatures as low as 80 K. The restructuring manifests itself both in mobility of step-edge atoms, as well as changes in the position of the herringbone reconstruction over time. These effects are explained in terms of the preferential adsorption sites of styrene allowing it to assist in atom detachment from step edges, as well as lowering of the energetic barrier for movement of the herringbone reconstruction. This work has important consequences for studies in which Au is used as a support for or as an electrical contact to molecules.     

PSORALEN-OLEFIN PHOTOPRODUCI'S: FIRST OBSERVATION OF A PHOTO-ENE REACTION

Abstract Methyl-substituted psoralens (4'-(hydroxymethyl)-4,5',8-trimethylpsoralen and 4,5',8-trimethylpsoralen) are found to yield an ene product as well as the expected [2+2] cycloaddition product from photochemical reaction with simple olefins. As determined by absorbance, liquid chromatography-mass spectrometry and nuclear magnetic resonance, both products are formed at the pyrone side of the respective psoralen. The product distribution is dependent on olefin concentration as well as the nature of the olefin. In deoxygenated solutions, cyclic olefins form as much as 50% ene product, while unsubstituted straight-chain olefins form as little as 3%. In oxygenated solutions, the product distribution is strongly affected by singlet oxygen.     

双氧水氧化环己烯催化合成己二酸研究进展

评述了近年来以环己烯为底物,双氧水为氧源,分别采用钨酸盐、钨酸、杂多酸及杂多酸盐、功能化分子筛和负载离子液体等为催化剂催化合成己二酸的研究进展.     

Chemical reaction and Soret effects on MHD convective flow of second grade fluid through an absorbent medium with ramped wall temperature as well as ramped surface concentration

In the present paper, the heat generating and/or absorption as well as thermo-diffusion on the unsteady free convection MHD gyrating flow of radiation and chemical reactive second grade fluid past an unbounded perpendicular plate during absorbent medium have been discussed. Here, it is assumed that, the confining plate has the ramped wall temperature with ramped surface concentration and isothermal temperature with ramped surface concentration. The analytical solutions for the governing equations are found by utilization of Laplace transformation methodology. The velocity, temperature and concentration profiles are analyzed with quite few figures. It is determined that, velocity, temperature and concentration distribution sketches in case of ramped temperature as well as ramped surface concentration are not as much of as those of isothermal temperature as well as ramped surface concentration. In addition to the idioms of skin friction, Nusselt number as well as Sherwood number are achieved and characterized numerically with tabular format.     

Dithiocarbamates as Precursors in Organic Chemistry; Synthesis and Uses

Abstract

Organic dithiocarbamates have received great attention due to their interesting chemistry and wide utility as radical precursors and intermediates in organic synthesis. They also have found many of applications, that is, in agriculture and medicine. They are in use as pesticides, as well as in the rubber industries as vulcanization accelerators; and as antioxidants. Because they exhibit strong metal-binding capacity, they can act as in inhibitors of enzymes and have a profound effect on biological systems. Moreover, they have found application in the treatment of cancer and HIV.     

Combining enabling techniques in organic synthesis: continuous flow processes with heterogenized catalysts

The concepts article describes enabling techniques (solid-phase assisted synthesis, new reactor design, microwave irradiation and new solvents) in organic chemistry and emphasizes the combination of several of them for creating new synthetic technology platforms. Particular focus is put on the combination of immobilized catalysts as well as biocatalysts with continuous flow processes. In this context, the PASSflow continuous flow technique fulfils both chemical as well as chemical engineering requirements. It combines reactor design with optimized, monolithic solid phases as well as reversible immobilization techniques for performing small as well as large scale synthesis with heterogenized catalysts under continuous flow conditions.     

Enzyme-based biocatalysis for the treatment of organic pollutants and bioenergy production

Enzyme-based biocatalysis is emerging as an advanced technique to develop green processes that help to maintain the sustainability of the environment. The bioremediation of toxic organic pollutants and waste to bioenergy production using enzymes as biocatalysts is rapidly growing due to its eco-friendly and sustainable nature. Additionally, a range of microbial species that typically grow on organic wastes can be used to produce these enzymes in an efficient manner. This is seen as a potential strategy for the development of cost-effective manufacturing for a number of biotechnological applications. The present study discusses biocatalysis as a promising and sustainable method toward the bioremediation of hazardous organic pollutants as well as for bioenergy production, based on the immense potential of enzymes as biocatalysts. Emphasis has been placed on evaluating the critical elements that can enhance the production of enzymes used as biocatalysts, as well as their functional effectiveness and stability.     

Oxazole and Isoxazole Chemistry in Crop Protection

An overview is given of the significance of the oxazole and isoxazole scaffolds in crop protection chemistry. The main herbicidally, fungicidally, and insecticidally active oxazole and isoxazole classes are presented, together with their synthesis routes, modes of action, and biological efficacies. In addition, the role of oxazoles and isoxazoles as lead structure or as intermediate in the synthesis of other agrochemicals is reported. Also, partially and fully saturated oxazole and isoxazole derivatives such as oxazolines, isoxazolines, oxazolidines, and isoxazolidines, oxygenated derivatives such as oxazolones and isoxazolones as well as annulated derivatives, such as benzoxazoles and benzisoxazoles, are covered.     

Asymmetric multicomponent reactions (AMCRs): the new frontier

Asymmetric multicomponent reactions involve the preparation of chiral compounds by the reaction of three or more reagents added simultaneously. This kind of addition and reaction has some advantages over classic divergent reaction strategies, such as lower costs, time, and energy, as well as environmentally friendlier aspects. All these advantages, together with the high level of stereoselectivity attained in some of these reactions, will force chemists in industry as in academia to adopt this new strategy of synthesis, or at least to consider it as a viable option. The positive aspects as well as the drawbacks of this strategy are discussed in this Review.     

微波促进离子液体相反应在有机合成中的应用

微波促进离子液体相有机合成技术作为一种新型的绿色化学合成法,引起了人们极大的兴趣。在离子液体中,微波辅助下反应快速、收率高、选择性好、后处理简单,离子液体经简单再生后可多次套用。本文综述了以离子液体为反应介质或催化剂的微波辅助技术在多种类型有机反应中的研究成果,主要包括了环合反应、亲核取代反应、金属复分解反应、酰化反应、重排反应、聚合反应、偶联反应、氧化还原反应和选择性脱溴反应等。     

New monomers and polymers via Diels-Alder cycloaddition

The series of new bis(naphthalic anhydrides) was prepared through Diels-Alder cycloaddition. The Diels-Alder cycloaddition was used as a synthetic route to new phenylated monomers as well as to polymers. All polymers synthesized revealed to be soluble in a wide range of organic solvents such as toluene, THF, chloroform, and displayed high thermostability. Therefore, they can be processed easily and are promising candidates for advanced coating systems as well as for electrooptical applications.