Kinetics of the complexation of Al3+ with aminoacids,IDA and NTA

The kinetics of the complexation of Al³⁺ with aminoacids, IDA and NTA are investigated by the stopped flow method with conductivity detection in the range of pH < 4. Reaction amplitudes and pseudo-first-order rate constants are evaluated yielding equilibrium and rate constants. It is shown that Al³⁺ forms only complexes with the negatively charged species and that the kinetics of all investigated ligands can be explained with the same reaction scheme. For aspartic acid, IDA and NTA a stepwise complexation is observed where monodentate complexes are formed by a fast reaction (2s ⁻¹ < k < 20s¹) which is base catalyzed. The rate determining step is the solvent exchange at Al³⁺ according to the Eigen-Wilkins mechanism. However, the ligand influences this exchange rate and a linear free energy relation is found between log k and pK_a, which also describes the kinetics of other ligands. This fast reaction is followed by the much slower formation of chelates (for NTA:k = 0.27 s ⁻¹) which is controlled by the deprotonation of the nitrogen atom. The overall association constant of the Al-NTA complex is determined as log (K_ass/dm³mol⁻¹) = 13.0 ± 0.3. © 1996 John Wiley & Sons, Inc.     

Extraction of neodymium(III) using binary mixture of Cyanex 272 and Cyanex 921/Cyanex 923 in kerosene

The extraction of Nd(III) using binary mixtures of Cyanex 272 (HA), Cyanex 921/Cyanex 923 (B) in kerosene from nitric acid medium has been investigated. The effect of aqueous phase acidity, extractant concentration, nitrate ion concentration and diluents on the extraction of Nd(III) has been studied. On the basis of slope analysis results, extracted species are proposed as Nd(NO₃)A₂·3HA and Nd(NO₃)₂·A·3HA·B using Cyanex 272 and its mixture with Cyanex 921/Cyanex 923, respectively. With the mixture of 0.1 M Cyanex 272 and 0.1 M Cyanex 923 in kerosene, the extraction of 0.001 M Nd(III) from 0.001 M HNO₃ solution was found to be 83.3 % whereas it was 73.3 % when 0.1 M Cyanex 921 used as synergist under same experimental conditions. The stripping data of Nd(III) from the loaded organic phase containing 0.1 M Cyanex 272 and 0.1 M Cyanex 921/Cyanex 923 with different acids indicated sulphuric acid to be the best stripping agent.     

Kinetics and equilibrium of the complexation of Al3+ with poly(maleic, acrylic) acid

Kinetics and equilibrium of the complexation of Al³⁺ with a polycarboxylic acid (PCA, random copolymer of maleic and acrylic acid with a mean molecular weight of 92 kDa) are investigated by the stopped flow technique and potentiometric titration. The complexation proceeds according to the Eigen–Tamm mechanism, i.e. in first diffusion-controlled step an outer sphere complex is formed. The second rate determining step is the formation of the inner sphere complex, controlled by the exchange rate of hydration water. For this second step the rate constant is k ₁=3 s^-1. It is in the order of magnitude of the water exchange at the Al³⁺ ion as expected for the Eigen–Tamm mechanism. The activation parameters are also determined. Parallel to this direct reaction path a base catalyzed path is found, typical for complexation reactions of hydrolyzable metal ions. Stable complexes are formed for which the overall association constant K _ass=Q _o(1+K _i) is determined by two parts: a chemical (intrinsic) part, described by the inner sphere association constant K _i=3 and an electrostatically controlled part described by the outer-sphere association quotient Q _o. The evaluation of the kinetic experiments allows to determine the value of log(Q _o) as a function of pH: 3.3<log Q _o<4.6. From these data the potential is calculated in the range −67 to ∝93 mV at pH values between 2 and 4. For comparison, analogous experiments with the monomeric subunits of the polyacid, glutarate (GA), and tricarballylate (TCA), are performed. The complexation with the monomeric subunits glutaric- and tricarballylic acid can be explained within the classical view of a discrete outer sphere association constant Q _o. Received: 13 November 1997 Accepted: 24 March 1998     

A complexation study of 15-crown-5 with Co2+ cation in some pure and mixed organic solvents

The stability constant (log K _f) and the thermodynamic parameters (free energies, enthalpies, and entropies) of the complexation of Co²⁺ cation with 15-crown-5 (15C5) in acetonitrile-methanol (AN/MeOH), acetonitrile-nitrobenzene (AN/NB), acetonitrile-dichloromethane (AN/DCM) and acetonitrile-1,2-dichloroethane (AN/DCE) binary solvent solutions were calculated from the experimental conductance data at different temperatures. The complexation behavior of the crown ether used in these media was discussed in view of the estimated parameters. In all solvent systems, 15-crown-5 formed a 1: 1 complex with Co²⁺ cation. The stability order of (Co-15C5)²⁺ complex in the binary mixed solvents at 25°C was found to be: AN/NB > AN/DCM ≈ AN/DCE > AN/MeOH. In most cases, a non-linear relationship was observed for changes of log K _f of (Co-15C5)²⁺ complex versus the composition of the binary mixed solvent systems. The experimental results show that the standard thermodynamic parameters of the complexation process change with the nature and composition of the binary solvent solutions.     

Bioconversion of <Emphasis Type="SmallCaps">d</Emphasis>-glucose into <Emphasis Type="SmallCaps">d</Emphasis>-glucosone by Glucose 2-oxidase from <Emphasis Type="Italic">Coriolus versicolor</Emphasis> at Moderate Pressures

Glucose 2-oxidase (pyranose oxidase, pyranose:oxygen-2-oxidoreductase, EC 1.1.3.10) from Coriolus versicolor catalyses the oxidation of d-glucose at carbon 2 in the presence of molecular O₂ producing d-glucosone (2-keto-glucose and d-arabino-2-hexosulose) and H₂O₂. It was used to convert d-glucose into d-glucosone at moderate pressures (i.e. up to 150 bar) with compressed air in a modified commercial batch reactor. Several parameters affecting biocatalysis at moderate pressures were investigated as follows: pressure, [enzyme], [glucose], pH, temperature, nature of fluid and the presence of catalase. Glucose 2-oxidase was purified by immobilized metal affinity chromatography on epoxy-activated Sepharose 6B-IDA-Cu(II) column at pH 6.0. The rate of bioconversion of d-glucose increased with the pressure since an increase in the pressure with compressed air resulted in higher rates of conversion. On the other hand, the presence of catalase increased the rate of reaction which strongly suggests that H₂O₂ acted as inhibitor for this reaction. The rate of bioconversion of d-glucose by glucose 2-oxidase in the presence of either nitrogen or supercritical CO₂ at 110 bar was very low compared with the use of compressed air at the same pressure. The optimum temperature (55°C) and pH (5.0) of d-glucose bioconversion as well as kinetic parameters for this enzyme were determined under moderate pressure. The activation energy (E _a) was 32.08 kJ mol⁻¹ and kinetic parameters (V _max, K _m, K _cat and K _cat/K _m) for this bioconversion were 8.8 U mg⁻¹ protein, 2.95 mM, 30.81 s⁻¹ and 10,444.06 s⁻¹ M⁻¹, respectively. The biomass of C. versicolor as well as the cell-free extract containing glucose 2-oxidase activity were also useful for bioconversion of d-glucose at moderate pressures. The enzyme was apparently stable at moderate pressures since such pressures did not affect significantly the enzyme activity.     

Trityl salt—initiated polymerization of α-methylstyrene

The initiation reaction of the polymerization of α-methylstyrene by trityl tetrachloroferate and tritylhexachloroantimonate in 1,2-dichloroethane at 20°C was studied. The rate constants were 14 × 10^?3 and 27 × 10^?3 L mol^?1s^?1, respectively. The dissociation constants of tritylterachloroferate (K_d = 0.88 × 10^?4M^?1) and tritylhexachloroantimonate (K_d = 2.64 × 10^?4M^?1) was determined. The effect of electron acceptors and donors on the dissociation equilibrium and initiation rate was investigated. It was shown that in strongly dissociated ion pairs such as stable carbenium salts the electron donors and acceptors have no appreciable effect on the magnitude of the dissociation. The temperature dependence of the rate constants in the ?20–+20°C range yielded the following thermodynamic parameters for trityltetrachloroferate: E_i = 8.54 kcal/mol; A = 3.2 × 10⁴ mol^?1s^?1; ΔH* = 8 kcal/mol; and S* = ?39.8 eu.     

Spectrophotometric Study of the Complexation of Samarium(III) with Disodium 2-(2-Hydroxy-3-Sulfo-5-Nitrophenylazo)naphthalene-1,8-Dihydroxy-3,6-Disulfonate in the Presence of Cetyltrimethylammonium Bromide

The complexation of samarium(III) with disodium 2-(2-hydroxy-3-sulfo-5-nitrophenylazo)naphthalene-1,8-dihydroxy-3,6-disulfonate (R) was studied in the presence and absence of cetyltrimethylammonium bromide (CTMABr). Monoligand SmR and mixed-ligand SmR-CTMABr complexes were formed at pH 6 and showed light absorption maxima at 531 and 529 nm, respectively. The formation constants (logK ₁ ) of SmR and SmR-CTMABr complexes were 4.06 ± 0.04 and 4.99 ± 0.04, respectively. The ratios of components in monoligand and mixed-ligand complexes were found to be 1 : 2 and 1 : 1 : 1, respectively. Beer's law was obeyed in solutions containing 1.20–7.20 and 1.20–9.60 μg/mL Sm, respectively. A procedure for the photometric determination of samarium in monazite was developed. __________ Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 9, 2005, pp. 924–926. Original Russian Text Copyright ? 2005 by Gadzhieva, Guseinov, Chyragov.     

Stability of the Ion Pair Between Ca<Superscript>2+</Superscript> and 2-(Hydroxymethyl)-3-Deoxy-D-<Emphasis Type="Italic">erythro</Emphasis>-Pentonate (α-Isosaccharinate)

Ion-pair formation between Ca²⁺ and -isosaccharinate, Ca²⁺ + ISA^-CaISA⁺, was studied by two independent methods: an ion-exchange and a potentiometric method (Ca-selective electrode). The two methods gave similar values for the complexation constant, log K_CaISA+^o at I = 0, (22 ± 1)°C. The ion-exchange method gave a value of log K_o^CaISA+ = (1.8 ± 0.1) and the potentiometric method resulted in logK_CaISA+^o = (1.78 ± 0.04). These values are in good agreement with the estimated value, log K_CaISA+^o = 1.7, based on the formation of a Ca-gluconate ion pair.     

Enzymatic hydrolysis of protein: Mechanism and kinetic model

The bioreaction mechanism and kinetic behavior of protein enzymatic hydrolysis for preparing active peptides were investigated to model and characterize the enzymatic hydrolysis curves. Taking into account single-substrate hydrolysis, enzyme inactivation and substrate or product inhibition, the reaction mechanism could be deduced from a series of experimental results carried out in a stirred tank reactor at different substrate concentrations, enzyme concentrations and temperatures based on M-M equation. An exponential equation dh/dt = aexp(-bh) was also established, where parameters a and b have different expressions according to different reaction mechanisms, and different values for different reaction systems. For BSA-trypsin model system, the regressive results agree with the experimental data, i.e. the average relative error was only 4.73%, and the reaction constants were determined as K _m = 0.0748 g/L, K _s = 7.961 g/L, k _d = 9.358/min, k ₂ = 38.439/min, E _a = 64.826 kJ/mol, E _d = 80.031 kJ/mol in accordance with the proposed kinetic mode. The whole set of exponential kinetic equations can be used to model the bioreaction process of protein enzymatic hydrolysis, to calculate the thermodynamic and kinetic constants, and to optimize the operating parameters for bioreactor design. __________ Translated from Journal of Tianjin University, 2005, 38(9) (in Chinese)     

Spectrophotometric determination of vanadium in petroleum crudes and derivatives

The spectrophotometric study of the complexation reaction between 5,5′methylenedisalicylhydroxamic acid and V(V) shows that two complexes are formed, the 1:1 (? = 5100 liters mol^?1 cm^?1 at 490 nm, log K_est = 5.8 ± 0.1) and the 1:2 (L:V) (? = 6250 liters mol^?1 cm^?1 at 600 nm, log K_est = 6.1 ± 0.1). A spectrophotometric method is developed for the determination of vanadium (2–9 ppm) at 2 N HCl and 495 nm, which allows its determination in petroleum crude oils with a series of advantages over the ASTM D-1548-63 method.     

Rates and equilibria in the reaction system Br + i-C4H10 ⇌ HBr + t-C4H9. The heat of formation of the t-butyl radical

The very low pressure reactor (VLPR) technique has been used to measure the bimolecular rate constant of the title reaction at 300 K. The rate constant is given by log k₁ (1/mol s) = (11.6 ± 0.4) ? (5.9 ± 0.6)/θ the equilibrium constant has also been measured at the same temperature and is given by K₁ = (5.6 ± 1) × 10^?3 and hence log k_?1 (1/mol s) = 9.5 ± 0.1. The results show that the reaction Br + t? C₄H₉ → HBr + i? C₄H₈ is unimportant under the present experimental conditions. Assigning the entropy of t-butyl radical to be 74 ± 2 eu which is in the possible range, the value of K₁ gives ΔH (t-butyl) = 9.1 ± 0.6 kcal/mol^?1. This yields for the bond dissociation, DH° (t-butyl-H) = 93.4 ± 0.6 kcal/mol. Both of these values are found to be in good agreement with recent VLPP studies.     

Nonlinear Dependence of Bioconcentration Factors on n-Octanol-Water Partition Coefficients of Chlorinated Dibenzofurans and Dibenzo-p-Dioxins

Abstract

A nonlinear thermodynamic model is applied to the prediction of both the bioconcentration factor (K_bw) in the guppy (Poecilia reticulata) and the n-octanol-water partition coefficient (K_ow) of chlorinated dibenzofurans and dibenzo-p-dioxins. To this end molar liquid volumes, heats of vaporization and empirically fitted parameters of the pertinent solute and solvents are used. Calculated log K_bw and log K_ow values are obtained with correlation coefficients (r = 0.85 and 0.992) and mean deviations (< dev > = 0.19 and 0.17), which compare favourably with experimental data.

In addition the model enables an explanation of the well-known nonlinear log-log relationship between the two properties for compounds with high K_ow values on the basis of differences between the properties of biotic lipid and n-octanol. It is suggested that the breakdown of the linear relationship is caused by entropic effects related to the number of chlorine atoms in the solute molecules and to the structures of the lipid and n-octanol.     

Catalytic activity of some organolanthanoid derivatives in styrene and propene polymerization

Organolanthanoids of several classes were examined as potential styrene and propene polymerization catalysts. They are: molecular hydrides of divalent lanthanoids (samarium, europium, ytterbium); naphthalene and stilbene complexes of neodymium(III), samarium(II), europium(II), ytterbium(II), lutetium(III); amides and alkoxides (including heterobifunctional derivatives) of praseodymium(III), neodymium(III), samarium(II), europium(II), thulium(III), ytterbium(II, III); thiolate of samarium(III); phenyl and phenylethinyl derivatives of europium(II), thulium(III), ytterbium(II); methylytterbium cluster Yb₈ (μ‐CH₃)₁₄(μ‐CH₂)(THF)₆; heterobimetallic samarium(II), ytterbium(II, III) complexes; diazabutadiene ytterbium(III) derivatives; metallic praseodymium and ytterbium, activated by iodine. The highest activity in styrene polymerization revealed hydrides, naphthalene and stilbene complexes of samarium(II), europium(II) and ytterbium(II). In the propene polymerization only [(η⁵‐C₅H₄)CH₂CH­(CH₂OBu)(η¹‐O)]YbMe(THF) displayed noticeable activity.Copyright © 2001 John Wiley & Sons, Ltd.     

Spectrophotometric Investigation of Iron(III)-N-Phenylcin-namohydroxamic Acid System

Abstract

N-Phenylcinnamohydroxamic acid, PCHA, was found to react with iron (III) to form complex species of different colour depending upon the reaction environment. The reaction conditions for the formation of the complex species were studied in aqueous-ethanolic medium. The general spectral properties of the species were investigated. The absorption curves were found to have two isobestic points. The number and composition of the complexes were determined and found to have composition 1:1, 1:2, 1:3 (Fe: PCHA). The wavelengths of the maximum absorbances were figured out to be 535, 495, and 445 nm for the I, II, and III complex species, respectively. It was verified that the Beer's law holds for these complexes at all wavelengths, and for the mixtures at the wavelengths of the isobestic points in a wide range of pH. The stepwise stability constants have been determined by the method of isobestic point and found to be log K₁ = 11.55, log K₂ = 10.11, and log Kg₃ = 7.44 for the I, II, and III complex species, respectively. The distribution diagrams (nomograms) of the complex species as a function of pH were constructed and the molar extinction coefficients of the three consecutive complexes have also been determined.     

Cesium, strontium, europium(III) and plutonium(IV) complexes with humic acid in solution and on montmorillonite surface

The effect of Aldrich humic acid (HA) on the mobility of¹³⁷Cs,⁸⁵Sr,¹⁵²Eu and²³⁹Pu radionuclides was studied in Ca-montmorillonite suspensions. Verified 2-sites-2-species (2s2s) models correspond to an intensive interaction of all elements with humificated surface, what is in a remarkable contrast with the weak complexation of cesium and even strontium in solutions — the neutral ligand interaction constants β (l/mol) are log β<−9.9 and 7.56±0.21 for Cs and Sr, respectively. The result for europium complexation in solution, log β=12.49±0.18 is in a good agreement with literature data. For plutonium(IV) not only a high proton competitive constant in solution was obtained, log β β=(−0.67±0.32)+3pH, but also a strong chemisorption, which at high concentrations of humic acid (above 0.05 g/l) indicates the formation of bridge humate complexes of plutonium on the humificated surface. Logarithms of heterogeneous interaction constants ( ₂₄ l/g) of the elements with surface humic acid are 4.47±0.23, 4.39±0.08, and 6.40±0.33 for Cs, Sr, and Eu(III), respectively, and the logarithm of the proton competitive constant ( ₂₄, l/g) for Pu(IV) −3.80±0.72. Distribution coefficients of humic acid and metal humates between 0.01 g HA/l solution and montmorillonite were derived as logK _d(AH)=−1.04±0.11, logK _d(EuA)=1.56±0.11 and logK _d(PuA)=2.25±0.04, while the values for Cs and Sr were obtained with very high uncertainty. Speciation of the elements on montmorillonite surface is illustrated as a function of equilibrium concentration of humic acid in solution and of pH.     

Luminescent Study on Nd3+ Complexes Containing Carboxylate‐Dithiolene and Alkoxide‐Dithiolene Ligands

Reaction of ligand L H₂ (4,5‐bis[carboxymethylthio]‐1,3‐dithiol‐2‐thione) with neodymium silyl‐amide (Nd[N(TMS)₂]₃; TMS= ‐SiMe₃), in a ratio 2:1, yields a neodymium‐dithiolene‐carboxylato complex ( 1 ) (Nd( L H) L ). Similarly, reaction of 2 equivalents of L′ H₂ (4,5‐bis[2′‐hydroxyethyl)thio]‐1,3‐dithiol‐2‐thione) and one equivalent of neodymium silyl‐amide (Nd[N(TMS)₂]₃) allowed the isolation of complex 2 , with a ligand:metal ratio of 3:2. ATR‐IR spectrum of 1 displays a broad band characteristic of an OH group showing that one carboxylate group remains protonated. Emission spectrum of complex 1 under excitation in the visible region (at 360 nm i.e. on the ligand) displayed typical emission bands of the Nd³⁺, showing that energy transfer from the ligand to the lanthanide was achieved (i.e. “antenna effect”). No significant quenching from the remaining –OH group was detected. In the case of complex 2 , the main emission bands characteristic of the Nd³⁺ ion have been observed, by excitation at 495 nm.     

Polymerization of α-methylstyrene by living polymer in tetrahydrofuran

Kinetics of polymerization of α-methylstyrene by poly-α-methylstyrylsodium (a “living” polymer) has been studied in tetrahydrofuran at ?78°C. Complex dependences were established: that of the conversion X on reduced time φ and that of the apparent rate constant for the polymer chain propagation on conversion X and on the concentration of living polymers and monomer. The experimental data obtained were explained by assuming a coordination mechanism of anionic polymerization including the following elementary reaction: (a) generation of active polymerization centers (K₁) by interaction of the living polymer with the monomer; (b) propagation of the polymer chains (K₂); (c) monomolecular (K₃₁) and bimolecular (K₃₂) reactions of isomerization of active centers resulting in the formation of high molecular weight living polymers capable of again becoming active centers of polymerization. Approximate derivation of kinetic equation was carried out and the constants of elementary reactions were determined (K₁ = 0.15, K₂ = 24, K₃₂ = 14.1./mole-min and K₃₁ = 0.05 min^?1). The coincidence of the expected dependencies X = F(τ; φ) K_p = F(X; n₀^?1/2); dx/dτ = F(n₀) with the experimental ones was followed with the aid of computers. The expected change in the values of X and K_p depending on the contribution of each elementary reaction to the overall polymerization process was analyzed.     

Solvent Extraction–Photometric Determination of Palladium Using Complexation with 1-(2-Pyridylazo)-2-Naphthol

Palladium(II) complexation with 1-(2-pyridylazo)-2-naphthol (PAN) in aqueous solutions followed by extraction with chloroform and photometric detection was studied. The best conditions were found for the formation of the complex in an aqueous solution and for its extraction with chloroform that provided a sufficient degree of binding palladium ions. The stability constant of the complex cation PdX⁺, which is extracted by chloroform as an ion pair [PdX]⁺[An^–] (An^–– CH₃COO^–), was calculated using the methods proposed by Rossotti (log K _stab= 18.73) and Komar' (log K _stab= 18.82). The equilibrium constant of the complexation reaction was also calculated (5.45 × 10⁴). It was shown that components of nonferrous alloys affect the determination of palladium by photometry as its complex or ion pair with PAN in chloroform.     

Binding constant determination of uranyl–citrate complex by ACE using a multi‐injection method

The binding constant determination of uranyl with small‐molecule ligands such as citric acid could provide fundamental knowledge for a better understanding of the study of uranyl complexation, which is of considerable importance for multiple purposes. In this work, the binding constant of uranyl–citrate complex was determined by ACE. Besides the common single‐injection method, a multi‐injection method to measure the electrophoretic mobility was also applied. The BGEs used contained HClO₄ and NaClO₄, with a pH of 1.98 ± 0.02 and ionic strength of 0.050 mol/L, then citric acid was added to reach different concentrations. The electrophoretic mobilities of the uranyl–citrate complex measured by both of the two methods were consistent, and then the binding constant was calculated by nonlinear fitting assuming that the reaction had a 1:1 stoichiometry and the complex was [(UO₂)(Cit)]^?. The binding constant obtained by the multi‐injection method was log K = 9.68 ± 0.07, and that obtained by the single‐injection method was log K = 9.73 ± 0.02. The results provided additional knowledge of the uranyl–citrate system, and they demonstrated that compared with other methods, ACE using the multi‐injection method could be an efficient, fast, and simple way to determine electrophoretic mobilities and to calculate binding constants.     

Anionic lanthanide phenoxide complexes as novel single‐component initiators for the polymerization of ε‐caprolactone and trimethylene carbonate

The anionic lanthanide‐sodium‐2,6‐di‐tert‐butyl‐phenoxide complexes [Ln(OAr)₄][Na(DME)₃]·DME (Ln = Nd 1 (neodymium), Sm 2 (samarium), or Gd 3 (gadolium); DME = dimethoxyethane) were synthesized by the reaction of anhydrous LnCl₃ with 4 equiv of sodium‐2,6‐di‐tert‐butyl‐phenoxide NaOAr in high yields and structurally characterized. These complexes showed high catalytic activity in the ring‐opening polymerizations of ?‐caprolactone (?‐CL) and trimethylene carbonate (TMC). The catalytic activity profoundly depended on the lanthanide metals. The active order of Gd < Sm < Nd for the polymerization of ?‐CL and TMC was observed. The polymers obtained with these initiators all showed a unimodal molecular weight distribution, indicating that the [Ln(OAr)₄][Na(DME)₃]·DME anionic complexes could be used as single‐component initiators. The anionic complex was more efficient than the corresponding neutral complex, Ln(OAr)₃(THF)₂. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1210–1218, 2007