Dissociation of dimethyl ether at high temperatures

The decomposition of dimethyl ether (CH₃OCH₃) has been investigated behind incident shock waves in a diaphragmless shock tube using laser schlieren densitometry, LS (T = 1500–2450 K, P = 57 ± 4, 125 ± 5 and 253 ± 12 Torr). The LS density gradient profiles were simulated and excellent agreement was found between the simulations and experimental profiles. Rate coefficients for CH₃OCH₃ → CH₃O + CH₃ were obtained. They showed strong fall-off, and at the lower end of the experimental temperature range are close to the low pressure limit. First order rate coefficient expressions were determined over 1500 < T < 2450 K. k_57Torr = (3.10 ± 1.0) × 10⁷⁹T^?19.03 exp(?54417/T) s^?1, k_125Torr = (1.12 ± 0.3) × 10⁸³T^?19.94 exp(?55554/T) s^?1and k_253Torr = (1.02 ± 0.3) × 10⁷³T^?17.09 exp(?51500/T) s^?1. The effect of a roaming channel for decomposition of dimethyl ether was assessed and the best agreement was obtained with 1% dissociation of DME via the roaming path.     

Crystal growth and characterization of a new co-ordination complex—barium tetrakis(maleate) dihydrate

Crystals of barium tetrakis(maleate) dihydrate [Ba₄(C₄H₂O₄)₄]^?2H₂O are grown in gelated hydrosilica matrix. Single crystal X-ray diffraction studies show that the crystal system is monoclinic with space group P2₁/c. The unit cell dimensions are a=9.3721(2)  Å, b=20.5880(7)  Å, c=14.0744(4) Å, α=γ=90°, β=90.289(2)°. Powder XRD studies confirmed the single phase nature of the grown crystals. The FTIR data is in conformity with the XRD results. The TG–DTA curves of the material indicate a three-step thermal decomposition. The response of the dielectric properties in the temperature range 30 °C to 500 °C is correlated with the TG–DTA results.     

Ce0.8Sm0.2O1.9 synthesis for solid oxide fuel cell electrolyte by ultrasound assisted co-precipitation method

In this study, the synthesis of Ce_0.8Sm_0.2O_1.9 (SDC) solid electrolyte by the ultrasound assisted co-precipitation method was accomplished to explore the effects of ultrasound power, ultrasound pulse ratio and probe type upon the ionic conductivity of SDC as well as the lattice parameter, the microstructure and the density. Fine powders of uniform crystallite sizes (average 11.70 ± 0.62 nm) were obtained, needing lower sintering temperature. The SDC powders were successfully sintered to a relative density of over 95% at 1200 °C (5 °C min^?1) for 6 h. The micrograph of SDC pellets showed non-agglomerated and well-developed grains with average size of about 200 nm. X-ray diffraction analysis showed that the lattice parameter increased with increasing acoustic intensity and reached a maximum for the 14.94 W cm^?2. Further, a linear relationship was detected between the lattice parameter and the ionic conductivity, inspiring a dopant like effect of US on the electrolyte properties. The highest ionic conductivity as σ_800°C = 3.07 × 10^?2 S cm^?1 with an activation energy E_a = 0.871 kJ mol^?1 was obtained with pulsed ultrasound for an acoustic intensity of 14.94 W cm^?2, using 19 mm probe and 8:2 pulse ratio.     

Thermoluminescence studies of thermally treated CaB4O7:Dy

Borate based thermoluminescence dosimeters (TLD) show high sensitivity and good TL characteristics. One of the promising material amongst the dosimeters is Dy doped CaB₄O₇. Spectrally resolved thermoluminescence of Dy doped CaB₄O₇ shows three glow peaks at about 50 °C, 240 °C and 380 °C, the intensity of the 240 °C glow peak being the maximum. All TL experiments were conducted on a high sensitivity TL spectrometer at Sussex University with a heating rate of 50 °C min^?1. Two main emissions associated with the Dy dopant are observed at ～480 and 580 nm. The samples were subjected to a series of treatments including excitation by X-rays and UV laser radiation. As part of the present research CaB₄O₇:Dy materials were subjected to two different heat treatments; quenching and slow cooling in order to investigate the changes in TL characteristics.     

Thermoluminescence,infrared reflectivity and electron paramagnetic resonance properties of hemimorphite

Silicate mineral hemimorphite has been investigated concerning its TL, IR and EPR properties. A broad TL peak around 180 °C and a weaker and narrower peak around 360 °C were found in a sample annealed at 600 °C for 1 h and then irradiated. The deconvolution using the CGCD method revealed peaks around 132, 169, 222 and 367 °C. The reflectivity measurements showed several bands in the NIR region due to H₂O, OH and Al–OH complexes. No band was observed in the visible region. The thermal treatments were carried out from ∼110 to 940 °C and dehydration was observed, first causing a diminishing optical absorption in general and the disappearance of water and hydroxyl absorption bands. The EPR spectrum of natural hemimorphite, presented Cu²⁺ signals at g = 2.4 and g = 2.1 plus E₁′ signal superposed to Fe³⁺ signal around g = 2.0.     

The phase transition in PrGa0.95Mg0.05O3 at elevated temperatures

PrGa_0.95Mg_0.05O₃ was synthesized by a standard solid-state technique, having an orthorhombic structure determined from X-ray diffraction (XRD) data at room temperature. At high temperature, an inflection is found on the Ln σT vs. 1/T curve at about 550 °C. The inflection can also be observed on thermal expansion vs. temperature curve at about 530 °C. Furthermore, the number of Raman modes between 200 and 400 cm^?1 decreases and the peak at about 190 cm^?1 weakens at about 450 °C. The results indicate a structural transition from orthorhombic to tetrahedral or rhombohedral.     

A preliminary study on a new LiBOB/acetamide solid phase transition electrolyte

New solid electrolytes containing acetamide and lithium bioxalato borate (LiBOB) with different molar ratios have been investigated. Their melting points (T_m) are around 42 °C. The ionic conductivities and activation energies vary drastically below and above T_m, indicating a typical feature of phase transition electrolyte. The ionic conductivity of the LiBOB/acetamide electrolyte with a molar ratio of 1:8 is 5 × 10^? 8 S cm^? 1 at 25 °C but increases to 4 × 10^? 3 S cm^? 1 at 60 °C. It was found that anode materials, such as graphite and Li₄Ti₅O₁₂, could not discharge and charge properly in this electrolyte at 60 °C due to the difficulty in forming a stable passivating layer on the anodes. However, a Li/LiFePO₄ cell with this electrolyte can be charged properly after heating to 60 °C, but cannot be charged at room temperature. Although the LiBOB/acetamide electrolytes are not suitable for Li-ion batteries due to poor electrode compatibility, the current results indicate that a solid electrolyte with a slightly higher phase transition temperature than room temperature may find potential application in stationary battery for energy storage where the electrolyte is at high conductive liquid state at elevated temperature and low conductive solid state at low temperature. The interaction between acetamide and LiBOB in the electrolyte is also studied by Raman and FTIR spectroscopy.     

Experimental investigation of flame spreading over pure methane hydrate in a laminar boundary layer

Flame spreading over pure methane hydrate in a laminar boundary layer is investigated experimentally. The free stream velocity (U_∞) was set constant at 0.4 m/s and the surface temperature of the hydrate at the ignition (T_s) was varied between ?10 and ?80 °C. Hydrate particle sizes were smaller than 0.5 mm. Two types of flame spreading were observed; “low speed flame spreading” and “high speed flame spreading”. The low speed flame spreading was observed at low temperature conditions (T_s = ?80 to ?60 °C) and temperatures in which anomalous self-preservation took place (T_s = ?30 to ?10 °C). In this case, the heat transfer from the leading flame edge to the hydrate surface plays a key role for flame spreading. The high speed flame spreading was observed when T_s = ?50 and ?40 °C. At these temperatures, the dissociation of hydrate took place and the methane gas was released from the hydrate to form a thin mixed layer of methane and air with a high concentration gradient over the hydrate. The leading flame edge spread in this premixed gas at a spread speed much higher than laminar burning velocity, mainly due to the effect of burnt gas expansion.     

Tuneability of Sm(1 − x)CexFeO3 ± λ perovskites: Thermal stability and electrical conductivity

Trimetallic perovskite oxides, Sm_(1 ? x)Ce_xFeO_3 ± λ (x = 0–0.05), were prepared by thermal decomposition of amorphous citrate precursors followed by calcinations. The material properties of the substituted perovskites were characterized by X-ray diffraction (XRD), X-ray florescence spectroscopy (XRF), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The doped materials exhibited a single perovskite phase in air up to 1350 °C and have specific surface areas in the range of 2.696–8.665 m²/g. In reducing atmosphere (5%v/vH₂/N₂), the unsubstituted perovskite (x = 0) decomposed into two phases while the ceria stabilized materials (x = 0.01, x = 0.03, x = 0.05) remained in a single phase as revealed by XRD analysis. Their conductivities were measured by the four point probe method in air and in dilute hydrogen (5%v/vH₂/N₂) separately. The ceria substituted materials show increased stability versus reduction and phase separation for a wide temperature range (up to 1000 °C). Although undoped SmFeO₃ has higher conductivity under oxidizing conditions than ceria doped SmFeO₃ due its p-type nature, the situation is reversed under reducing conditions. The ceria substituted perovskites (Sm_(1 ? x)Ce_xFeO_3 ± λ, x = 0–0.05) showed higher conductivity in reducing than in oxidizing conditions, suggesting that ceria doping at the A-site has changed the SmFeO₃ from p-type to n-type semi-conducting behavior.     

Electrical conductivity and thermal expansion of the oxy-cuspidine Gd4Al2O9 substituted with Ca and Sr

The series of Gd_4 ? xM_xAl₂O_9 ? x/2 (M = Ca, Sr) with x = 0, 0.01, 0.05, 0.10 and 0.25 was prepared by the citrate complexation method. Both Gd_4 ? xCa_xAl₂O_9 ? x/2 and Gd_4 ? xSr_xAl₂O_9 ? x/2 show the monoclinic cuspidine structure with space group of P2₁/c up to 0.05–0.1 and 0.01–0.05 mol for Ca and Sr, respectively. Beyond the substitution limit of Gd₄Al₂O₉, GdAlO₃ and SrGd₂Al₂O₇ appear as additional phases. The highest electrical conductivity obtained at 900 °C yielded σ = 1.49 × 10^? 4 S/cm for Gd_3.95Ca_0.05Al₂O_8.98. In comparison, the conductivity of pure Gd₄Al₂O₉ was σ = 1.73 × 10^? 5 S/cm. The conductivities determined are in a similar range as those of other cuspidine materials investigated previously. The thermal expansion coefficient of Gd₄Al₂O₉ at 1000 °C was 7.4 × 10^? 6 K^? 1. The phase transition between 1100 and 1200 °C reported earlier changes with increasing substitution of Ca and Sr.     

Inelastic neutron scattering on iron-based superconductor BaFe2(As,P)2

Inelastic neutron scattering has been performed on powder sample of an iron-based superconductor BaFe₂(As_0.65P_0.35)₂ with superconducting transition temperature (T_c) = 30 K, whose superconducting (SC) order parameter is expected to have line node. In the normal state, constant-E scan of dynamical structure factor, S(Q, E), exhibits a peak structure centered at momentum transfer Q ～ 1.20 Å^?1, corresponding to antiferromagnetic wave vector. Below T_c, the redistribution of the magnetic spectral weight takes place, resulting in the formation of a peak at E ～ 12 meV and a gap below 6 meV. The enhanced magnetic peak structure is ascribed to the spin resonance mode, evidencing sign change in the SC order parameter similar to other iron-based high-T_c superconductors. It suggests that fully-gapped s_± symmetry dominates in this superconductor, which gives rise to high-T_c (=30 K) despite the nodal symmetry.     

Interaction of dioxouranium(VI) ion with EDTA at different ionic strengths

The formation of complex species of dioxouranium(VI) ion with EDTA was studied in the pH range of 1–3.5 and at 25 °C using a combination of potentiometric and spectrophotometric techniques. Results showed evidence for formation of the following species: [UO₂H₄EDTA]²⁺, [UO₂H₃EDTA]⁺, and [UO₂H₂EDTA]. Investigations were performed in sodium perchlorate as background electrolyte at 0.1, 0.3, 0.5, 0.7, and 1.0 mol dm^? 3. The parameters based on the formation constants were calculated, and the dependences of protonation and the stability constants on ionic strength are described. The dependence on ionic strength of the formation constants was analyzed using the specific ion interaction theory (SIT) model. The stability constant values at infinite dilution, obtained using SIT model, are log β°₁₄₁ = 6.77, log β°₁₃₁ = 5.99 and log β°₁₂₁ = 9.29, where indexes for the overall stability constant, β_pqr, refer to the equilibrium pUO₂²⁺ + qH⁺ + rL^4? ? M_pH_qL_r^{(2p + q ? 4r)}. The specific interaction coefficients are also reported.     

Thermal and chemical expansion of mixed conducting La0.5Sr0.5Fe1−xCoxO3−δ materials

Oxygen deficiency, thermal and chemical expansion of La_0.5Sr_0.5Fe_1−xCo_xO_3−δ (x = 0, 0.5, 1) have been measured by thermogravimetry, dilatometry and high temperature X-ray diffraction. The rhombohedral perovskite materials transformed to a cubic structure at 350 ± 50 °C. The thermal expansion of the materials up to the onset of thermal reduction was 14–18 × 10^− 6 K^− 1. Above 500 °C in air (400 °C in N₂), chemical expansion contributed to the thermal expansion and the linear thermal expansion coefficients were significantly higher, 16–35 × 10^− 6 K^− 1. The chemical expansion, ε_c, showed a maximum of 0.0045 for x = 0.5 and 0.0041 for x = 1 at 800–900 °C. The normalized chemical expansion, ε_c/Δδ, was 0.036 for x = 0.5 and 0.035 for x = 1 at 800 °C. The chemical expansion can be correlated with an increasing ionic radius of the transition metals with decreasing valence state.     

Field-assisted sustainable O− ion emission from fluorine-substituted 12CaO·7Al2O3 with improved thermal stability

We examined the electric field-assisted thermionic emission of atomic oxygen radical anion (O^?) in a vacuum from fluorine-substituted derivatives of 12CaO·7Al₂O₃ (C12A7) with a composition of (12 ? x)CaO·7Al₂O₃·xCaF₂ (0 ≤ x ≤ 0.8). Unsubstituted C12A7 easily decomposed into 5CaO?3Al₂O₃ (C5A3) and 3CaO?Al₂O₃ (C3A) above 830 °C during the emission experiment in a vacuum. The decomposition temperature range became narrower as the amount of F^? ion substitution increased, e.g. the sample with x = 0.4 kept a single phase after the emission experiment at 900 °C. The emitted anionic species from the x = 0.4 sample were dominated by O^? ions (～ 92%) together with a small amount of O₂^? ions (～ 4%) and F^? ions (～ 4%). The absence of an O₂ gas supply to the opposite side of the emission surface led to a nearly steady co-emission of O^? ions and electrons with a ratio of < 1/1. The O₂ gas supply markedly enhanced the O^? ion emission, and suppressed the electron emission. A sustainable and high-purity O^? ion emission with a current density of 11 nA cm^? 2 was achieved at 830 °C with the supply of 40 Pa O₂ gas. The similarity in these emission features to the unsubstituted C12A7, together with the improved thermal stability demonstrates that the F^? ion-substituted C12A7 is a promising material for higher intensity O^? ion emission at higher temperatures.     

Shock tube/laser absorption studies of the decomposition of methyl formate

Reaction rate coefficients for the major high-temperature methyl formate (MF, CH₃OCHO) decomposition pathways, MF → CH₃OH + CO (1), MF → CH₂O + CH₂O (2), and MF → CH₄ + CO₂ (3), were directly measured in a shock tube using laser absorption of CO (4.6 μm), CH₂O (306 nm) and CH₄ (3.4 μm). Experimental conditions ranged from 1202 to 1607 K and 1.36 to 1.72 atm, with mixtures varying in initial fuel concentration from 0.1% to 3% MF diluted in argon. The decomposition rate coefficients were determined by monitoring the formation rate of each target species immediately behind the reflected shock waves and modeling the species time-histories with a detailed kinetic mechanism [12]. The three measured rate coefficients can be well-described using two-parameter Arrhenius expressions over the temperature range in the present study: k₁ = 1.1 × 10¹³ exp(?29556/T, K) s^?1, k₂ = 2.6 × 10¹² exp(?32052/T, K) s^?1, and k₃ = 4.4 × 10¹¹ exp(?29 078/T, K) s^?1, all thought to be near their high-pressure limits. Uncertainties in the k₁, k₂ and k₃ measurements were estimated to be ±25%, ±35%, and ±40%, respectively. We believe that these are the first direct high-temperature rate measurements for MF decomposition and all are in excellent agreement with the Dooley et al. [12] mechanism. In addition, by also monitoring methanol (CH₃OH) and MF concentration histories using a tunable CO₂ gas laser operating at 9.67 and 9.23 μm, respectively, all the major oxygen-carrying molecules were quantitatively detected in the reaction system. An oxygen balance analysis during MF decomposition shows that the multi-wavelength laser absorption strategy used in this study was able to track more than 97% of the initial oxygen atoms in the fuel.     

Bulk and surface properties of ionic salt CsH5(PO4)2

We report a comparative study of transport and thermodynamic properties of single-crystal and polycrystalline samples of the ionic salt CsH₅(PO₄)₂ possessing a peculiar three-dimensional hydrogen-bond network. The observed potential of electrolyte decomposition ≈ 1.3 V indicates that the main charge carriers in this salt are protons. However, in spite of the high proton concentration, the conductivity appears to be rather low with a high apparent activation energy E_a ≈ 2 eV, implying that protons are strongly bound. The transport anisotropy though is not large, correlates with the crystal structure: the highest conductivity is found in the [001] direction (σ_130 °C ∼ 5.6 × 10^− 6 S cm^− 1) while the minimal conductivity is in the [100] direction (σ_130 °C ∼ 10 ⁻⁶ S cm^− 1). The conductivity of polycrystalline samples appears to exceed the bulk one by 1–3 orders of magnitude with a concomitant decrease of the activation energy (E_a ≈ 1.05 eV), which indicates that a pseudo-liquid layer with a high proton mobility is formed at the surface of grains. Infrared and Raman spectroscopy used to study the dynamics of the hydrogen-bond system in single-crystal and polycrystalline samples have confirmed the formation of such a modified surface layer in the latter. However, no bulk phase transition into the superionic disordered phase is observed in CsH₅(PO₄)₂ up to the melting point T_melt ∼ 151.6 °C, in contrast to its closest relative compound CsH₂PO₄.     

Logarithmic temperature variations of the elastic constant of barium titanate near the ferroelectric phase transition

The temperature variations of the elastic constant C₁₁ and the corresponding acoustic attenuation coefficient of barium titanate single crystals grown by two different methods in the paraelectric phase were obtained in a wide temperature by means of Brillouin light scattering. Two phenomenological approaches were adopted to attempt to explain the anomalous change in C₁₁ (denoted as ΔC₁₁) in the paraelectric phase. ΔC₁₁ exhibited a logarithmic variation as log[(T ? T₀)/T₀] in a certain temperature range from T_c to about T_c + 80 °C instead of the other variation of (T ? T₀)^ζ predicted by the mean-field approach. This temperature range was almost the same as the range where precursor dynamics were theoretically predicted to set in. The fact that the logarithmic variation was proposed for uniaxial systems might indicate that the correlated deformation of precursor polar clusters is tetragonal, as was suggested from nuclear magnetic resonance study [7].     

Thermo,Iono and photoluminescence properties of 100 MeV Si7+ ions bombarded CaSiO3:Eu3+ nanophosphor

This paper reports on the thermo (TL), iono (IL) and photoluminescence (PL) properties of nanocrystalline CaSiO₃:Eu³⁺ (1–5 mol %) bombarded with 100 MeV Si⁷⁺ ions for the first time. The effect of different dopant concentrations and influence of ion fluence has been discussed. The characteristic emission peaks ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) of Eu³⁺ ions was recorded in both PL (1×10¹¹–1×10¹³ ions cm^?2) and IL (4.16×10¹²–6.77×10¹² ions cm^?2) spectra. It is observed that PL intensity increases with ion fluence, whereas in IL the peaks intensity increases up to fluence 5.20×10¹² ions cm^?2, then it decreases. A well resolved TL glow peak at ～304 °C was recorded in all the ion bombarded samples at a warming rate of 5 °C s^?1. The TL intensity is found to be maximum at 5 mol% Eu³⁺ concentration. Further, TL intensity increases sub linearly with shifting of glow peak towards lower temperature with ion fluence.     

Structure,stability and electrical properties of the La(2−x)SrxMnO4±δ solid solution series

Single phase materials of the La_(2−x)Sr_xMnO_4±δ (0.6 ≤ x ≤ 2.0) solid solution series were prepared via solid state reaction. The structure of each material was examined at room temperature and determined to be tetragonal for all phases examined. An expansion in lattice volume was observed on increasing lanthanum content. The stability and thermal expansion of each member of the solid solution series was determined via the use of in situ high temperature X-ray diffraction. It was found that all materials remained stable up to a temperature of 800 °C. Thermal expansion coefficients were found to be in the region of 15 × 10^− 6 K^− 1 for La_(2−x)Sr_xMnO_4±δ compounds where x > 1.4. The electrical conductivity of each phase was also determined over a similar temperature range with a maximum value of ∼6 Scm^− 1 at 900 °C for the x = 1.8 phase.