Effects of melamine polyphosphate and halloysite nanotubes on the flammability and thermal behavior of polyamide 6

Melamine polyphosphate (MPP) and halloysite nanotubes (HNT) were introduced to polyamide 6 (PA6) by melt blending in order to improve the fire resistance. PA6 composite containing 12% flame retardants with good spinnability was obtained. The flammability of PA6 composite was characterized by limiting oxygen index (LOI), UL‐94 vertical burning and cone calorimeter (CONE) tests. The results indicated that the LOI value could reach 24.0 vol.% and UL‐94 rating could achieve V2 level at the presence of 12% flame retardants. CONE data demonstrated that peak heat release rate was significantly reduced from 554 kW/m² of neat PA6 to 368 kW/m² of the sample containing flame retardants. Thermal analysis indicated that the thermal stability and char formation were improved by the presence of flame retardants. The morphology of residue char was characterized by scanning electron microscopy; and it suggested that a network‐structured protective char layer had been formed. The possible synergism between MPP/HNT and their flame retardant mechanism was also analyzed and discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

New developments in chemical modification of fire-safe rigid polyurethane foams

This work reports the preparation of polyurethane-polyisocyanurate (PUR-PIR) foams containing different amounts of flame retardants (FRs) and a layered silicate nanoclay. An environmentally friendly blowing agent, a mixture of 1,1,1,3,3-pentafluorobutane and 1,1,1,2,3,3,3-heptafluoropropane (HFC 365/227), with small amount of water was used. The flame retarded PUR-PIR foams showed better fire resistance in comparison to classical PUR and unmodified PUR-PIR foams without deterioration of their functional properties. It was observed that when nanoclay was used in conjunction with flame retardants containing reactive bromine and phosphorus compounds, and zinc stannate, the flammability was significantly reduced. Expandable graphite was also used in some samples. As control samples for reference purposes three foam systems without any flame retardant were frothed: PUR, PUR-PIR and foams PUR-PIR modified by carbodiimide groups.     

Syntheses and flame retarding properties of DOPO polymers,melamine polymers,and DOPO‐melamine copolymers

The 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) polymers, melamine polymers, and DOPO‐melamine copolymers have been successfully synthesized, and their flame retarding properties have also been investigated by blending with polypropylene (PP)/styrene‐ethylene‐butylene‐styrene (SEBS) alloys. Experimental results establish that all of them are good polymeric flame retardants. No blooming or color stains occur when they are incorporated into PP/SEBS alloys. Among lab‐made polymeric flame retardants, DOPO‐ melamine copolymers exhibit the best thermal stability and nonflammability. PP/SEBS alloys containing DOPO‐melamine copolymers display comparable thermal resistance and flame retarding behavior (T_d = 290°C; char yield: 15.6%, LOI: 23, and flammability: UL‐94 V0) as the alloys containing common commercial flame retardants (i.e., DOPO, melamine, and ammonium polyphosphate). Copyright © 2013 John Wiley & Sons, Ltd.     

Flame-Retardant Additives for Polypropylene

Abstract

The increased use of plastics in present day life has resulted in a growing awareness of flammability problems associated with these materials. Since polyolefins, and especially polypropylene, are involved in a wide range of applications, the development of flame retardants suitable for polypropylene has become an important area of research.     

Investigation of the flammability of different textile fabrics using micro-scale combustion calorimetry

Evaluating and analyzing the performance of flame retardant (FR) textiles are a critical part of research and development of new FR textiles products by the industry. The testing methods currently used in the industry have significant limitations. Most analytical and testing techniques are not able to measure heat release rate (HRR), the single most important parameter in evaluating the fire hazard of materials. It is difficult to measure HRR of textile fabrics using cone calorimetry because textile fabrics are dimensionally thin samples. The recently developed micro-scale combustion calorimetry (MCC) is able to measure the following flammability parameters for textile using milligram sample sizes: heat release capacity, HRR, temperature at peak heat release rate (PHRR), total heat release and char yield. In this research, we applied MCC to evaluate the flammability of different textile fabrics including cotton, rayon, cellulose acetate, silk, nylon, polyester, polypropylene, acrylic fibers, Nomex and Kevlar. We also studied the cotton fabrics treated with different flame retardants. We found that MCC is able to differentiate small differences in flammability of textile materials treated with flame retardants. We were also be able to calculate the limiting oxygen index (LOI) using the thermal combustion properties of various textile samples measured by the MCC. The calculated LOI data have yielded good agreement with experimental LOI results. Thus, we conclude that MCC is an effective new analytical technique for measuring textile flammability and has great potentials in the research and development of new flame retardants for textiles.     

Flammability, degradation and structural characterization of fibre-forming polypropylene containing nanoclay-flame retardant combinations

We have shown previously that the introduction of nanoclays can reduce the flammability of synthetic fibre-forming polymers like polyamides 6 and 6.6 only if used in conjunction with conventional flame retardants. In this work we report initial studies of the effects of dispersed nanoclays with low concentrations of selected flame retardants introduced into polypropylene on flammability, thermal degradation and X-ray diffraction behaviours. Flame retardants used include ammonium polyphosphate as a conventional char-former and a hindered amine stabiliser known to have flame retarding characteristics in polypropylene.     

Thermal degradation and flame retardancy of epoxy resins containing intumescent flame retardant

Pentaerythritol diphosphonate melamine-urea-formaldehyde resin salt, a novel cheap macromolecular intumescent flame retardants (IFR), was synthesized, and its structure was a caged bicyclic macromolecule containing phosphorus characterized by IR. Epoxy resins (EP) were modified with IFR to get the flame retardant EP, whose flammability and burning behavior were characterized by UL 94 and limiting oxygen index (LOI). 25 mass% of IFR were doped into EP to get 27.2 of LOI and UL 94 V-0. The thermal properties of epoxy resins containing IFR were investigated with thermogravimetry (TG) and differential thermogravimetry (DTG). Activation energy for the decomposition of samples was obtained using Kissinger equation. The resultant data show that for EP containing IFR, compared with EP, IFR decreased mass loss, thermal stability and R _max, increased the char yield. The activation energy for the decomposition of EP is 230.4 kJ mol⁻¹ while it becomes 193.8 kJ mol⁻¹ for EP containing IFR, decreased by 36.6 kJ mol⁻¹, which shows that IFR can catalyze decomposition and carbonization of EP.     

Comparison of the Effect of an Organoclay,Triphenylphosphate, and a Mixture of Both on the Degradation and Combustion Behaviour of PC/ABS Blends

Summary: Polycarbonate Acrylonitrile-Butadiene-Styrene blends (PC/ABS) with flame retardants Triphenyl Phosphate (TPP), nanoclay and their mixtures were prepared in a twin- screw extruder. The morphological properties were characterized by X-ray diffractometry (XRD) which showed the intercalated structure of nanoclay in the matrix. Thermal stability of the samples was studied using Thermogravimetric Analysis (TGA), and the degradation kinetic parameters were determined using various methods including Kissinger, Flynn-Wall-Ozawa and Coats-Redfern methods. It was found that the sample containing both TPP and nanoclay has the highest activation energy. The activation energy order of PC/ABS blends with different flame retardant packages, obtained by Kissinger method agrees well with that obtained by Coats-Redfern. Cone calorimetry and limited oxygen index (LOI)/underwriters laboratory 94 (UL94) methods were used to investigate the fire behaviour and flammability of materials. The reduced mass loss rate (MLR), peak heat release rate (PHRR) and enhanced LOI of the composite containing mixture system confirmed a synergistic effect of TPP and nanoclay.     

Studies on the effect of different levels of toughener and flame retardants on thermal stability of epoxy resin

A thermoplastic toughener, polyether sulphone (PES) and a number of different types of flame retardants were blended in different ratios with a commercial epoxy resin triglycidyl-p-aminophenol (TGAP) and 4,4-diamino diphenyl sulphone (DDS) a curing agent. The effect of type and levels of flame retardants (FR) and the toughening agent on the curing, thermal decomposition and char oxidation behaviour of the epoxy resin was studied by the simultaneous differential thermal analysis and thermogravimetric techniques. It was observed that the toughener slightly increases the curing temperature (by up to 20 °C) but had minimal effect on the decomposition temperature of the resin. Flame retardants, however affected all stages depending upon the type of flame retardant used. The curing peak for samples containing tougher and flame retardants although slightly changed depending upon the type of FR, was not more than ± 20 °C compared to that of samples containing toughener only. All flame retardants lowered the decomposition temperature of the epoxy resin. Phosphorus- and nitrogen-containing flame retardants reduced the char oxidation leading to more residual char, whereas halogen- containing flame retardants had less effect on this stage.     

Combination effect of nanoparticles with flame retardants on the flammability of nanocomposites

Polystyrene based nanocomposites (PNCs) with and without flame retardant additives were successfully prepared through a single-screw extrusion technique. The combination effect of nanoparticles and flame retardants was investigated with nanosilica and attapulgite clay as nanofillers, and with a NASA formulated SINK flame retardant. A comprehensive study was done by Cone Calorimetry, UL94 and TGA.The addition of nanoparticles to polystyrene generally improved the OI of polystyrene. The horizontal burning tests suggested that nanofiller types have different impacts on the flammability of nanocomposites. According to the vertical burning tests and oxygen indices, it was found that polystyrene/silica and polystyrene/attapulgite clay PNCs alone are not flame retardant. In fact, the materials burned faster. However, the combination of nanocomposites with the SINK flame retardant significantly altered the thermal stability, and flammability of the materials. A remarkable reduction in heat release rates of polystyrene was achieved for both silica and attapulgite with flame retardant nanocomposites. For instance, the introduction of 20% SINK into PS reduced the PHRR of PS from 1212 to 838 (−31%); 10% silica reduced it from 1212 to 1060 (−13%), while the combination of silica and SINK reduced it to 530 (−56%), which clearly shows interaction between nanosilica and SINK.     

Synthesis of novel poly(aminophosphonate ester)s flame retardants and their applications in EVA copolymer

Novel oligomeric intumescent flame retardants, poly(amino phosphonate ester)s (PAPEs), containing both phosphorous and nitrogen, were synthesized by reacting diethyl phosphite with two different polyschiff bases obtained from the reaction of diamines with dialdehyde. The target PAPEs (designated as PAPE‐d and PAPE‐e, respectively) were characterized by ¹H NMR, ³¹P NMR, Fourier Transform infrared spectroscopy, elemental analysis, gel permeation chromatography and thermogravimetric analysis (TGA) techniques. Thermal stability and flammability of ethylene‐vinyl acetate copolymer (EVA)/PAPE blends with various PAPE content were investigated by TGA, limited oxygen index (LOI), vertical burning test (UL‐94) and microscale combustion colorimeter (MCC). The results indicate that PAPEs effectively improve the flame retardancy of EVA. The EVA/30%PAPE‐e blend has a LOI value of 28, and its peak heat release rate (PHRR) value in MCC measurement is reduced by 36%. At the same time, the EVA/PAPE blends also have high yield of residual char, indicating that PAPEs are effective charring agents. Scanning electron microscopy observations of the residues of the EVA/PAPE blends show the existence of compact char layer on the surface of the residues, which is responsible for the improvement of the flame retardancy of EVA. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of a novel phosphorous-nitrogen containing intumescent flame retardant on the fire retardancy and the thermal behaviour of poly(butylene terephthalate)

A novel phosphorus-nitrogen containing intumescent flame retardant (P-N IFR) was prepared via the reaction of a caged bicyclic phosphorus (PEPA) compound and 4,4′-diamino diphenyl methane (DDM) in two steps. The product was added to poly(butylene terephthalate) (PBT) to obtain halogen-free flame retarded polyester. UL-94 test, thermogravimetry and in situ infrared spectroscopy were used to characterize the flammability, thermal degradation properties and the char-forming process. It was shown that the phosphorus-nitrogen containing compound could improve both the flame retardancy and thermal stability more effectively than other P-N flame retardants. Furthermore, it was a good char-forming agent incorporated with the co-addition of polyurethane (PU) when the combustion occurred. The formation of P-N structure was incorporated in the char layer.     

New Phosphorus-Containing Flame Retardants for Poly-Urethanes and Polyesters

Abstract

New phosphorus - containing monomers and oligomers from tetrakis(hydroxymetyl)phosphonium chloride and dialkylphosphites are synthesized. On the basis of new products phosphorus-containing polyesters, polyurethanes and polyuretanesemicazbazides with improved fire resistance are obtained. The dependence of fire resistance of the polymers on the structure of the use flame retardants is investigated.     

A Comparative analysis of polymerization filled polyethylene composites with reduced flammability

Fire-resistant polyethylene-based composites and self-extinguishing composites with high stress-strain characteristics have been synthesized with vanadium-based Ziegler-Natta catalysts in the presence of fillers, such as aluminum hydroxide and complex flame retardants based on aluminum hydroxide and decabromodiphenyl oxide in combination with Sb₂O₃. The correlation between oxygen index and filler content in the composites has been established. Empirical relationships relating oxygen index to the formulation and content of flame-retardant agents in the composites are proposed; these relationships allow one to predict flammability of the filled PE without any fire tests.     

Polyamide 6 with a flame retardant encapsulated by polyamide 66: Flame retardation, thermo-decomposition and the potential mechanism

A novel encapsulated flame retardant containing phosphorus-nitrogen(MSMM-Al-P) was prepared by encapsulating with polyamide 66(PA66-MSMM-Al-P) for the flame retardation of polyamide 6(PA6).The structure and thermal properties of PA66-MSMM-Al-P were characterized by Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy and thermogravimetric analysis.The flammability of PA6 containing flame retardants(MSMM-Al -P and PA66-MSMM-Al-P) was investigated by the limiting oxygen index test,vertical burning test and cone calorimeter. The flame retardancy and cone calorimetric analyses suggested a synergistic effect between PA66 and MSMM-Al-P in the flame-retardant PA6.Thermal stability of the flame-retardant PA6 was also investigated.     

Molecular Firefighting—How Modern Phosphorus Chemistry Can Help Solve the Challenge of Flame Retardancy

The ubiquity of polymeric materials in daily life comes with an increased fire risk, and sustained research into efficient flame retardants is key to ensuring the safety of the populace and material goods from accidental fires. Phosphorus, a versatile and effective element for use in flame retardants, has the potential to supersede the halogenated variants that are still widely used today: current formulations employ a variety of modes of action and methods of implementation, as additives or as reactants, to solve the task of developing flame‐retarding polymeric materials. Phosphorus‐based flame retardants can act in both the gas and condensed phase during a fire. This Review investigates how current phosphorus chemistry helps in reducing the flammability of polymers, and addresses the future of sustainable, efficient, and safe phosphorus‐based flame‐retardants from renewable sources.     

A combination of POSS and polyphosphazene for reducing fire hazards of epoxy resin

Extensive application of epoxy resins (EPs) is highly limited by their intrinsic flammability. Combining EPs with nanoparticles and phosphorus‐nitrogen flame retardants is an effective approach to overcome the drawback. In this work, simultaneous incorporation of octa‐aminophenyl polyhedral oligomeric silsesquioxanes (OapPOSS) and polyphosphazene into EP was reported for the first time. Significantly, reduced peak of heat release rate and UL‐94 V‐0 rating were achieved by tuning suitable ratios of polyphosphazene and OapPOSS for EP composites. During combustion, polyphosphazene promoted char formation and released nonflammable gases such as CO₂, NH₃, and N₂ to dilute oxygen concentration and cool pyrolysis zone. Moreover, numerous phosphorus‐containing species acting as free radical scavengers were generated during degradation. Silicon dioxide evolving from OapPOSS protected char residues from thermal degradation. This study provides a novel method to fabricate high‐performance flame‐retardant EP composites, which have potential applications in the field of electrics and electronics.     

Boronated (co)polystyrene: monomer reactivity ratios,thermal behavior and flammability

Chemical modification based on incorporation of flame retardants (FR) into the polymer backbone was used in order to reduce polystyrene flammability. Boronated styrenes such as 4‐vinylphenylboronic acid (StB(OH)₂) and 6‐methyl‐2‐(4‐vinylphenyl)‐1,3,6,2‐dioxazaborocane‐4,8‐dione (StBcyclo) were applied as reactive FR. Homo‐ and copolymers of boronated styrenes and styrene (St) were synthesized with different feed ratios using free radical polymerization. It yielded in series of (co)polymers with various amounts of StB(OH)₂ and StBcyclo (5–20% mol/mol of St). Copolymer compositions were determined by ¹H NMR. The relative reactivity ratios of system St‐StBcyclo were determined by applying the Jaacks method. Glass transition temperature and thermal stability of obtained (co)polymers were determined from DSC and TGA analysis, respectively. The pyrolysis combustion flow calorimeter was applied as a tool for assessing the flammability of the synthesized (co)polymers. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of halogenless flame retardants on the thermal properties, flammability, and fire hazard of cross-linked EVM/NBR rubber blends

This paper presents the results of investigating the thermal stability, flammability, and fire hazard of cross-linked EVM/NBR blends unfilled and filled with halogenless flame-retardant compounds such as melamine cyanurate or magnesium hydroxide. The thermal analysis of the blends was carried out in the atmosphere of air. The activation energy of the composite destruction was determined by two non-isothermal methods: Flynn–Wall–Ozawa’s and Kissinger’s methods. The flammability of the composites obtained was determined by the method of oxygen index and on the basis of their combustion in air. The fire hazard of the vulcanizates investigated was determined with the use of a cone calorimeter and on the basis of toxicometric parameters W _LC50SM. The test results have shown that the flame retardants used increase the thermal stability of the cross-linked blends and decrease their flammability, and thereby allow one to obtain self-extinguishing or non-flammable polymeric materials. The cross-linked EVM/NBR blends filled with these flame-retardant compounds are characterized by good mechanical properties and reduced fire hazard.     

Constructing a bio-based flame retardant coating through co-depositing polydopamine and guanosine 5′-monophosphate disodium salt (GMP) for flexible polyurethane foam

The fire hazard posed by the inherent flammability and smoke toxicity of flexible polyurethane foam (FPUF) often necessitates the incorporation of flame retardants to meet stringent regulations. The development of environmentally friendly strategies to enhance the fire resistance of FPUF is of increasing importance and a significant amount of research has been devoted to this end. In this work, a bio-based coating was constructed by co-depositing polydopamine and guanosine 5′-monophosphate disodium salt (GMP) to increase the fire safety of FPUF. The coating significantly improved the flame retardancy of FPUF. The FPUF@PDA-GMP samples showed an LOI value of 24.5% with a self-extinguishing effect and exhibited reduced release of heat, smoke, CO, CO₂, and HCN due to their compact and strong char. The compressive strength at 70% strain of FPUF@PDA-GMP was 8 times higher than that of the control FPUF sample. The coating had a little negative effect on the resilience and improved its elongation at break. This investigation has provided a useful method for designing and producing high-performance foams.