Investigation on electromechanical properties of A-site donor rare-earth modified tetragonal (4 mm) lead barium niobate (PBN55) ceramics

In this paper, Pb_0.55?(3y/2)Ce_yBa_0.45Nb₂O₆ ceramics with tetragonal tungsten–bronze structure prepared through the solid-state reaction method and characterized for phase formation, density, dielectric and piezoelectric properties are reported. The XRD analysis showed the presence of a tetragonal tungsten–bronze structure, which intensified with increasing Ce content. The stability of the tetragonal tungsten–bronze phase has been discussed with the electronegativity difference and the tolerance factor. The Curie temperature (T_c) systematically lowered when Ce was incorporated into tetragonal PBN lattice. The room-temperature dielectric constant (ε_RT) of Ce-modified lead barium niobate (PBN) compositions has enhanced from C₀ to C₃ and thereafter decreased. The influence of Ce on piezoelectric properties of tetragonal PBN system has been evaluated. The piezoelectric coefficients (d, g, k and Q_m) were characterized. The C₃ composition exhibited optimum piezoelectric properties in the series, and this composition could be suitable for piezoelectric applications.     

Anisotropic properties in textured lead barium niobate compositions around the morphotropic phase boundary

Partially textured Pb_xBa_1 ? xNb₂O₆ ceramics, with compositions around the morphotropic phase boundary, were obtained by the hot forging technique. Scanning electron microscopy revealed that the grains were arranged with their lengthwise direction preferentially in the direction of the forging. From the differences of the X ray diffraction profiles between the samples analyzed in the direction of forging and those analyzed in the pressing direction it was possible to confirm the crystallographic growth habit of the PBN ceramics for the tetragonal and orthorhombic symmetry compositions. The identification of a mixture of tetragonal and orthorhombic symmetry phases in a whole range of studied compositions was also possible. The phase transformation around the morphotropic phase boundary (in this case, tetragonal (4mm) to orthorhombic (m2m)) could be analyzed through the direction change of the polarization vector in partially textured PBN ceramics.     

Dielectric and piezoelectric properties of (Bi1−x−yNdxNa1−y)0.5BayTiO3 lead-free ceramics

New lead-free (Bi_1−x−yNd_xNa_1−y)_0.5Ba_yTiO₃ ceramics were prepared by a conventional ceramic technique and their dielectric and piezoelectric properties were studied. X-ray diffraction studies reveal that Nd³⁺ and Ba²⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a new solid solution with a pure perovskite structure, and a morphotropic phase boundary (MPB) of rhombohedral and tetragonal phases is formed at 0.04 < y < 0.10. The partial substitutions of Nd³⁺ and Ba²⁺ decrease effectively the coercive field E_c and increase significantly the remanent polarization P_r. Because of lower E_c, larger P_r and the formation of the MPB, the piezoelectric properties of the ceramics are significantly enhanced at x/y = 0.02/0.06: d₃₃ = 150 pC/N and k_p = 30.5%. The ceramics exhibit relaxor characteristic, which is probably resulted from the cation disordering in the 12-fold coordination sites. The depolarization temperature T_d shows a strong compositional dependence and reaches a minimum value at the MPB. The temperature dependences of the ferroelectric and dielectric properties suggest that the ceramics may contain both the polar and non-polar regions near the depolarization temperature T_d, which cause the polarization hysteresis loop become deformed near/above T_d.     

White-light generation through Ce3+/Mn2+-codoped and Eu2+-doped Ba1.2Ca0.8SiO4 T-phase phosphors

Hexagonal Ba_1.20Ca_0.8?2x?ySiO₄:xCe³⁺,xLi⁺,yMn²⁺ phosphors exhibit two emission bands peaking near 400 and 600 nm from the allowed f–d transition of Ce³⁺ ions and the forbidden ⁴T₁–⁶A₁ transition of Mn²⁺ ions, respectively. The strong interaction between Ce³⁺/Mn²⁺ ions is investigated in terms of energy transfer, crystal field effect, and microstructure by varying their concentrations. They show a higher quenching temperature of 250 °C than that of a commercially used (Ba,Sr)₂SiO₄:Eu²⁺ phosphor (150 °C). Finally, mixtures of these phosphors with green-emissive Ba_1.20Ca_0.70SiO₄:0.10Eu²⁺ are tested and yielded correlated color temperatures from 3500 to 7000 K, and color rendering indices up to 95%.     

High room-temperature pyroelectric response of MgO-modified Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 ceramics

The dielectric and pyroelectric responses of MgO-modified Pb_0.99(Zr_0.95Ti_0.05)_0.98Nb_0.02O₃ ceramics were investigated near F_R(LT)–F_R(HT) phase transition. It was found that MgO additive reduced the F_R(LT)–F_R(HT) phase transition temperature from 41 °C to room temperature (24 °C). Superior room-temperature pyroelectric properties were obtained in the composition of 0.10 wt% MgO addition without DC bias. The largest pyroelectric coefficient, 65 × 10⁻⁸ C cm⁻² K⁻¹, was detected. Accordingly, the detectivity figures of merit F_d had maximum values of 20 × 10⁻⁵ Pa^−1/2, and especially the voltage responsivity F_v = 0.91 m²C⁻¹ is the highest value reported so far among all pyroelectric materials. It shows promising potential for application in uncooled pyroelectric infrared detector.     

Effect of Li2CO3 addition on the structural,optical, ferroelectric,and electric-field-induced strain of lead-free BNKT-based ceramics

In this work, we reported the effect of Li₂CO₃ addition on the structural, optical, ferroelectric properties and electric-field-induced strain of Bi_0.5(Na,K)_0.5TiO₃ (BNKT) solid solution with CaZrO₃ ceramics. Both rhombohedral and tetragonal structures were distorted after adding Lithium (Li). The band gap values decreased from 2.91 to 2.69 eV for 5 mol% Li-addition. The maximum polarization and remanent polarization decreased from 49.66 μC/cm² to 27.11 μC/cm² and from 22.93 μC/cm² to 5.35 μC/cm² for un-doped and 5 mol% Li- addition BNKT ceramics, respectively. The maximum S_max/E_max value was 567 pm/V at 2 mol% Li₂CO₃ access. We expected this work will help to understand the role of A-site dopant in lead-free ferroelectric BNKT materials.     

Effect of rare-earth donor Ce3+ doping at A-site of PLSZNT on dielectric and piezoelectric properties

Dielectric and piezoelectric properties of [Pb_0.976La_0.014−xCe_xSr_0.01][Zr_0.57Ti_0.43]_{(0.9975−((0.014−x)/4)−(x/4))}Nb_0.002O₃ (PLCSZNT) ceramic compositions for 0 ⩽ x ⩽ 1 mol% were investigated. The XRD analysis showed the presence of single rhombohedral phase. Grain size and density increased until 0.6 mol% Ce and further Ce concentration inhibited the grain growth. The stability of rhombohedral phase has been supported by tolerance factor and average electronegativity difference. The room temperature dielectric response (ε_RT) increased up to 0.6 mol% combined with a significantly reduced dielectric loss (Tan δ) and low Curie temperature (T_c). The higher piezoelectric properties associated with low Ce concentration are attributed to rhombohedral phase. The optimum dielectric and piezoelectric properties were found in 0.6 mol% Ce composition which could be suitable for possible piezoelectric applications.     

Lanthanide-doped strontium barium niobate (SBN) materials: A vibrational investigation

Vibrational Raman spectra have been measured for strontium barium niobate (Sr_0.5Ba_0.5Nb₂O₆, SBN50) single crystals and nanopowders doped with 1 mol% of the luminescent ions Eu³⁺ and Er³⁺. The nanocrystalline materials show slightly broader spectra with respect to the single crystals with the same composition. The presence of the Eu³⁺ and Er³⁺ ions at the 1 mol% doping level, and the present particle size (200 nm) do not appear to affect the ferro-to-paraelectric phase transition temperature typical of undoped SBN50 single crystals, as detected from anomalies in the dependence of the position of the Raman peak around 635 cm^?1 as a function of the temperature.     

Structural,ferroelectric, optical properties of A-site-modified Bi0.5(Na0.78K0.22)0.5Ti0.97Zr0.03O3 lead-free piezoceramics

We reported the role of A-site modification on the structural, ferroelectric, optical and electrical field-induced strain properties of Bi_0.5(Na_0.78K_0.22)_0.5Ti_0.97Zr_0.03O₃ lead-free piezoceramics. The Li⁺ ions with concentration from 0 to 5 mol% were used to substitute at A-site. There was no phase transition when Li⁺ ions was added up to 5 mol%. The electric field-induced strain (S_max/E_max) values increased from 600 to 643 pm/V for 2 mol% Li⁺-added which results from distortion both rhombohedral and tetragonal phase structures. The band gap reduced from 2.88 to 2.68 eV and the saturation polarization decreased from 46.2 to 26.1 μC/cm² when Li⁺ ions concentration increased from 0 to 5 mol% respectively. We expect that this work could be helpful for further understanding the role of A-site dopants in comparison with B-site modification in lead-free Bi_0.5(Na,K)_0.5TiO₃-based ceramics.     

Crystal structure and photoluminescence of (Ba1−x−ySryEux)9Sc2Si6O24

Divalent europium-doped alkaline earth metal silicate phosphors, (Ba_1?x?ySr_yEu_x)₉Sc₂Si₆O₂₄ (x=0.005–0.1, y=0–0.95), have been successfully prepared by solid-state reaction at 1350 °C. The analysis of X-ray diffraction shows that the compounds are in a single phase at the proper concentration of Sr²⁺. At room temperature, the Eu²⁺-activated Ba₉Sc₂Si₆O₂₄ phosphor exhibits a single emission band peaking at about 506 nm. With the increasing content of Sr²⁺, the luminescent intensity of (Ba_1?x?ySr_yEu_x)₉Sc₂Si₆O₂₄ weakens, and the emission peak shifts towards red. Luminescence concentration quenching occurs when Eu²⁺ content x is more than 1 mol% in (Ba_1?x?ySr_yEu_x)₉Sc₂Si₆O₂₄ (y=0/0.2). At low temperatures (Ba_0.9?ySr_yEu_0.1)₉Sc₂Si₆O₂₄ (y=0/0.2) phosphors have two emission bands corresponding to different Eu²⁺ crystallographic sites. The high energy peak (P₁) is quenched at room temperature, while the low energy peak (P₂) weakens much more slowly owing to the energy transfer from P₁ to P₂.     

Double hysteresis loops induced by Mn doping in Pb0.99Nb0.02(Zr0.95Ti0.05)0.98O3 ferroelectric ceramics

Pb_0.99Nb_0.02(Zr_0.95Ti_0.05)_0.98O₃ (PNZT95/5) ceramics with 1 mol% and without Mn doping were prepared via conventional solid state reaction process. X-ray diffraction patterns show that the PNZT95/5 and Mn-doped PNZT95/5 (PNZTM95/5) ceramics, with composition near the boundary of the ferroelectric phase (FE)/antiferroelectric phase (AFE), have a rhombohedral perovskite structure. The ferroelectric behavior of PNZT95/5 ceramics is strongly affected by Mn doping. Without any aging process the PNZTM95/5 ceramics possess double hysteresis loops (P–E loops), whereas the PNZT95/5 ceramics possess normal single hysteresis loops. Due to the defect dipoles formed by effectively negatively charged Mn³⁺ dopants and positively charged O²⁻ vacancies, the PNZTM95/5 ceramics exhibit the double P–E loops. The defect dipole effect has been proved by investigating the P–E loops under different external fields. As a result, the PNZTM95/5 ceramics become “hardened”, exhibiting a high mechanical quality factor (1300).     

Preparation,characterization and electrical property of Mn-doped ceria-based oxides

Manganese-doped ceria-based oxides, Ce_1−xMn_xO_2−δ (0.05 ≤ x ≤ 0.3) and Ce_1−x−yGd_xMn_yO_2−δ˙ (0.05 ≤ x≤ 0.2, 0.05 ≤ y ≤ 0.25) were synthesized, and crystal phase analysis by XRD and measurements of electrical properties were performed. Solubility limit of Mn in Ce_1−xMn_xO_2−δ˙ seemed to be between 5 mol% and 10 mol% and Mn₃O₄ was the main by-product above the solubility limit in the case of heat treatment at 1300 °C. Judging from the oxygen partial pressure dependence of total conductivity and emf measurements, Ce_1−xMn_xO_2−δ˙ is a single-phase mixed conductor within the composition below the solubility limit, and when the composition of Mn exceeds the solubility limit, it becomes the dual-phase mixed conductor of Ce_1−xMn_xO_2−δ˙ and Mn₃O₄. The doing of Mn in gadlia-doped ceria, Ce_1−x−yGd_xMn_yO_2−δ˙ (0.05 ≤ x ≤ 0.2, 0.05 ≤ y ≤ 0.25), was more difficult than that in CeO₂ presumably due to the preferential reaction between Gd and Mn to give GdMnO₃ to the GDC solid solution formation, and the Mn doping seems not to be so effective in preparing the mixed ionic–electronic conductor based on GDC.     

Potentiality of SBN textured ceramics for pyroelectric applications

Textured Sr_xBa_1−xNb₂O₆ (SBN) ferroelectric ceramics with x = 0.53 and 0.63 were fabricated by hot forging process. The objective was to obtain, in the ceramic form, the strong anisotropy of the electric properties that these materials possess in the single crystal form. Properties such as electric permittivity, pyroelectric coefficient and dielectric loss showed an anisotropy between the perpendicular and parallel direction with respect to the pressure axis (applied pressure during the forging of the ceramics). A high pyroelectric coefficient, comparable with these published for SBN single crystal with the same composition, was obtained for the SBN53/47 ceramic, when measured in the perpendicular direction to the pressing axis. From the calculus of the pyroelectric figures of merit, it was possible to conclude that the textured SBN53/47 ceramic has a high potential to be used as pyroelectric elements. This ceramic, cut in the perpendicular direction to the pressing axis, possess high potential as fast pulse detector but the same ceramic, cut in the parallel direction to the pressing axis, has better properties to be used as large area and point detectors.     

Reduction of thin-film ceria on Pt(111) by supported Pd nanoparticles probed with resonant photoemission

Local defects present in CeO_2 ? x films result in a mixture of Ce³⁺ and Ce⁴⁺ oxidation states. Previous studies of the Ce 3d region with XPS have shown that depositing metal nanoparticles on ceria films causes further reduction, with an increase in Ce³⁺ concentration. Here, we compare the use of XPS and resonant photoemission spectroscopy (RESPES) to estimate the concentration of Ce³⁺ and Ce⁴⁺ in CeO_2 ? x films grown on Pt (111), and the variation of this concentration as a function of Pd deposition. Due to the nature of the electronic structure of CeO_2 ? x, resonant peaks are observed for the 4d–4f transitions when the photon energy matches the resonant energy; (hν = 121.0 eV) for Ce³⁺ and (hν = 124.5 eV) for Ce⁴⁺. This results in two discrete resonant photoemission peaks in valence band spectra. The ratio of the difference of these peaks with off-resonance scans gives an indication of the relative contribution of Ce³⁺. Results from RESPES indicate reduction of CeO_2 ? x on deposition of Pd, confirming earlier findings from XPS studies.     

Influence of simultaneous doping of Sb and Pb on phase formation,superconducting and microstructural characteristics of HgBa2Ca2Cu3O8+δ

We report systematic studies of structural, microstructural and transport properties of (Hg_0.80Sb_0.2−xPb_x)Ba₂Ca₂Cu₃O_8+δ (where x = 0.0, 0.05, 0.1, 0.15, 0.2) compounds. Bulk polycrystalline samples have been prepared by two-step solid-state reaction route at ambient pressure. It has been observed that simultaneous substitution of Sb and Pb at Hg site in oxygen deficient HgO_δ layer of HgBa₂Ca₂Cu₃O_8+δ cuprate high-T_c superconductor leads to the formation of Hg-1223 as the dominant phase. Microstructural investigations of the as grown samples employing scanning electron microscopy reveal single crystal like large grains embodying spiral like features. Superconducting properties particularly transport current density (J_ct) have been found to be sensitive to these microstructural features. As for example (Hg_0.80Sb_0.05Pb_0.15)Ba₂Ca₂Cu₃O_8+δ compound which exhibits single crystal like large grains (∼50 μm) and appears to result through spiral growth mechanism, shows highest J_ct (∼1.85 × 10³ A/cm²) at 77 K. A possible mechanism for the generation of spiral like features and correlation between microstructural features and superconducting properties have been put forward.     

Crystal structure,thermochemical stability,electrical and magnetic properties of the two-phase composites in the La0.8Sr0.2MnO3 ± δ–CeO2 system

Crystal structure, thermochemical stability, transport and magnetic properties of compositions in the (100-x) La_0.8Sr_0.2MnO_3 ± δ xCeO₂ (LSMC) system were studied. All compositions in the LSMC series containing more than 2 mol% CeO₂ were two phase and consisted of the modified perovskite constituent with rhombohedral structure (R3?c) and ceria as a secondary phase with cubic structure (Fm3?m). The presence of both Ce⁴⁺and Ce³⁺ cations in LSMC compositions was revealed by X-ray Photoelectron Spectroscopy (XPS). CeO₂ and compositions in the LSMC series showed good thermochemical stability in air and argon. However, in H₂–Ar atmosphere all LSMC compositions underwent reduction followed by decomposition. Transport and magnetic properties change in a non-linear way with the increase in the CeO₂ content. The LSMC2 composition showed enhanced electronic conductivity and magnetic characteristics. Metallic type conductivity was observed for LSMC compositions with x ≤ 36 mol% CeO₂ in a narrow temperature range of 770–900 °C. A small degree of substitution of Ce into LSM was found to change structural, magnetic and electrical properties.     

Thermal expansion behavior and chemical compatibility of BaxSr1−xCo1−yFeyO3−δ with 8YSZ and 20GDC

Perovskite oxides of the composition Ba_xSr_1−xCo_1−yFe_yO_3−δ(BSCF) were synthesized via a modified Pechini method and characterized by X-ray diffraction, dilatometry and thermogravimetry. Investigations revealed that single-phase perovskites with cubic structure can be obtained for x ≤ 0.6 and 0.2 ≤ y ≤ 1.0. The as-synthesized BSCF powders can be sintered in several hours to nearly full density at temperatures of over 1180 °C. Thermal expansion curves of dense BSCF samples show nonlinear behavior with sudden increase in thermal expansion rate between about 500 °C and 650 °C, due mainly to the loss of lattice oxygen caused by the reduction of Co⁴⁺ and Fe⁴⁺ to lower valence states. Thermal expansion coefficients (TECs) of BSCF were measured to be 19.2–22.9 × 10^− 6 K^− 1 between 25 °C and 850 °C. Investigations showed further that Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ is chemically compatible with 8YSZ and 20GDC for temperatures up to 800 °C, above which severe reactions were detected. After being heat-treated with 8YSZ or 20GDC for 5 h above 1000 °C, Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ was completely converted to phases like SrCoO_3−δ, BaCeO₃, BaZrO₃, etc.     

Photoluminescence characterization of a novel red-emitting phosphor In2(MoO4)3:Eu3+ for white light emitting diodes

The red-emitting phosphor In₂(MoO₄)₃:Eu³⁺ with cubic crystal structure was synthesized by a conventional solid-state reaction technique and its photoluminescence properties were investigated. The prepared phosphor can be efficiently excited by ultraviolet (395 nm) and blue (466 nm) light. The emission spectra of the phosphor manifest intensive red-emitting lines at 612 nm due to the electric dipole ⁵D₀→⁷F₂ transitions of Eu³⁺. The chromaticity coordinates of x=0.63, y=0.35 (λ_ex=395 nm) and x=0.60, y=0.38 (λ_ex=466 nm) are close to the standard of National Television Standard Committee values (NTSC) values. The concentration quenching of In₂(MoO₄)₃:Eu³⁺ is 40 mol% and the concentration self-quenching mechanism under 466 nm excitation was the dd intereaction. As a result of the strong emission intensity and good excitation, the phosphor In₂(MoO₄)₃:Eu³⁺ is regarded as a promising red-emitting conversion material for white LEDs.     

Effect of Ge4+ and Mg2+ doping on superconductivity,fluctuation induced conductivity and interplanar coupling of TlSr2CaCu2O7−δ superconductors

Substitution of Ge⁴⁺ in place of Cu in Tl_0.85Cr_0.15Sr₂CaCu_2?xGe_xO_7?δ (x = 0–0.6) showed initial increase in zero critical temperature value, T_{c zero} from 98 K (x = 0) to 100 K (x = 0.1) and in the range of 85–86 K for x = 0.2–0.3. The slow decrease in T_{c zero} is unexpected as tetravalent Ge⁴⁺ substitution is expected to strongly reduce hole concentration in the samples and suppress T_{c zero}. Excess conductivity analyses of resistance versus temperature data based on Asmalazov–Larkin (AL) theory revealed that the substitution induced 2D-to-3D transition of fluctuation induced conductivity with the highest transition temperature, T_2D–3D observed at x = 0.1. FTIR spectroscopy analysis indicates Ge⁴⁺ substitution cause reduction in CuO₂/GeO₂ interplanar distance while our calculation based on Lawrence–Doniach model revealed highest superconducting coherence length, ξ_c(0) and interplanar coupling, J at x = 0.3. On the other hand, substitution of divalent Mg²⁺ for Ca²⁺ in (Tl_0.5Pb_0.5)(Sr_1.8Yb_0.2)(Ca_1?yMg_y)Cu₂O₇ (y = 0–1.0), which is not expected to directly vary hole concentration, surprisingly caused T_{c zero} to increase from 89.6 K (y = 0) to an optimum value of 95.9 K (y = 0.6) before decreasing with further increase in y. Excess conductivity analyses showed 2D-to-3D transition of fluctuation induced conductivity for all samples where the highest T_2D–3D was at y = 0.4. Similar calculation revealed highest values of ξ_c(0) and J also at y = 0.4. FTIR analysis of the samples indicates inequivalent Cu(1)O(2)Pb/Tl lengths and possible tilting of CuO₂ plane as a result of Mg²⁺ substitution. The increased ξ_c(0) and J as a result of the Ge⁴⁺ and Mg²⁺ substitutions are suggested to contributed to sustenance of superconductivity above 80 K in the samples.     

Flux pinning and superconducting properties of melt-textured NEG-123 superconductor with TiO2 addition

We studied the effect of TiO₂ doping on flux pinning and superconducting properties of a melt-grown (Nd_0.33Eu_0.33Gd_0.33) Ba₂Cu₃O_y + 35 mol% Gd₂BaCuO₅ (70 nm in size) composite (NEG-123) processed in Ar–1% O₂ atmosphere. As indicated by similar, sharp superconducting transitions, the small quantities of TiO₂ used in our experiments did not deteriorate superconducting properties of the NEG material. Transmission electron microscopy (TEM) analysis found 20–50 nm Ti-based particles in the NEG-123 matrix. However, we have not observed the clouds of <10 nm sized particles in the NEG-123 matrix, as in the case of recently reported NEG-123 composites doped by Mo and Nb nanoparticles. Nevertheless, quite a good J_c–B performance in the 0.1 mol% Ti-doped sample, namely 550 kA/cm² at the self-field and at the secondary peak field (4.5 T) was achieved at 65 K, while 320 kA/cm² was obtained at zero-field at 77 K, and 50 kA/cm² at 90.2 K. The pinning effectiveness decreased with increasing Ti content above 0.2 mol%. The analysis of the pinning force showed that higher concentration of Ti (>0.2 mol%) increased the amount of normal pins (δl pinning), indicated by the Fp(h) peak shift from h = 0.42–0.36. The maximum pinning effect in a broad field range could be achieved by optimizing Ti content and adding sub-micron Gd-211 particles.