Palladium(II) complexes, as synthetic peptidases, regioselectively cleave the second peptide bond "upstream" from methionine and histidine side chains

Palladium(II) complexes promote hydrolysis of natural and synthetic oligopeptides with unprecedented regioselectivity; the only cleavage site is the second peptide bond upstream from a methionine or a histidine side chain, that is, the bond involving the amino group of the residue that precedes this side chain. We investigate this regioselectivity with four N-acetylated peptides as substrates: neurotransmitter methionine enkephalin (Ac-Tyr-Gly-Gly-Phe-Met) and synthetic peptides termed Met-peptide (Ac-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala), His-peptide (Ac-Val-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met(OX)-Ala-Ala-Arg-Ala), in which a Met is oxidized to sulfone, and HisMet-peptide (Ac-Val-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala). While maintaining protein-like properties, these substrates are suitable for quantitative study since their coordination to Pd(II) ion can be determined (by NMR spectroscopy), and the cleavage fragments can be separated (by HPLC methods) and identified (by MALDI mass spectrometry). The only peptide bonds cleaved were the Gly3-Phe4 bond in methionine enkephalin, Gly4-Gly5 bond in Met-peptide, Gly3-Gly4 in His-peptide, and Gly3-Gly4 and Gly9-Gly10 bonds in HisMet-peptide. We explain this consistent regioselectivity of cleavage by studying the modes of Met-peptide coordination to the Pd(II) ion in [Pd(H(2)O)(4)](2+) complex. In acidic solution, the rapid attachment of the Pd(II) complex to the methionine side chain is followed by the interaction of the Pd(II) ion with the peptide backbone upstream from the anchor. In the hydrolytically active complex, Met-peptide is coordinated to Pd(II) ion as a bidentate ligand - via sulfur atom in the methionine side chain and the first peptide nitrogen upstream from this anchor - so that the Pd(II) complex approaches the scissile peptide bond. Because the increased acidity favors this hydrolytically active complex, the rate of cleavage guided by either histidine or methionine anchor increased as pH was lowered from 4.5 to 0.5. The unwanted additional cleavage of the first peptide bond upstream from the anchor is suppressed if pH is kept above 1.2. Four Pd(II) complexes cleave Met-peptide with the same regioselectivity but at somewhat different rates. Complexes in which Pd(II) ion carries labile ligands, such as [Pd(H(2)O)(4)](2+) and [Pd(NH(3))(4)](2+), are more reactive than those containing anionic ligands, such as [PdCl(4)](2)(-), or a bidentate ligand, such as cis-[Pd(en)(H(2)O)(2)](2+). When both methionine and histidine residues are present in the same substrate, as in HisMet-peptide, 1 molar equivalent of the Pd(II) complex distributes itself evenly at both anchors and provides partial cleavage, whereas 2 molar equivalents of the promoter completely cleave the second peptide bond upstream from each of the anchors. The results of this study bode well for growing use of palladium(II) reagents in biochemical and bioanalytical practice.     

Cation-π Interactions. Synthesis and Crystal Structure of Palladium Complex: [K(DB18C6)]2[Pd(SCN)4]

A novel Pd(II)-dibenzo-18-crown-6 (DB18C6) complex [K(DB18C6)]2[Pd(SCN)4] has been isolated and characterized by X-ray diffraction analysis. In the solid state, it displays a quasi-one-dimensional infinite chain of two [K(DB18C6)] + complex cations and a [Pd(SCN)4]2- anion bridged by K+-p interactions between adjacent [K(DB18C6)] + units.     

Synergic effect of two metal centers in catalytic hydrolysis of methionine-containing peptides promoted by dinuclear palladium(II) hexaazacyclooctadecane complex

The species obtained by the reaction of [Pd2([18]aneN6)Cl2](ClO4)2(where [18]aneN6 is 1,4,7,10,13,16-hexaazacyclooctadecane) with AgBF4 have been determined by electrospray ionization mass spectrometry (ESI-MS) to be an equilibrium mixture of three major types of dinuclear Pd(II) complex cations, [Pd2(mu-O)([18]aneN6)]2+, [Pd2(mu-OH)([18]aneN6)]3+ and [Pd2(H2O)(OH)([18]aneN6)](3+), in aqueous solution. The hydroxo-group-bridged one, [Pd2(mu-OH)([18]aneN6)]3+, is a dominant species, whose crystal structure has been obtained. The crystal structure of [Pd2(mu-OH)([18]aneN6)](ClO4)3 shows that each Pd(II) ion in the dinuclear complex is tetra-coordinated by three nitrogen atoms and one hydroxo group bridge in a distorted square configuration. The two Pd(II) ions are 3.09 A apart from each other. The dinuclear Pd(II) complex cations [Pd2(mu-OH)([18]aneN6)]3+ and [Pd2(H2O)(OH)([18]aneN6)]3+ can efficiently catalyze hydrolysis of the amide bond involving the carbonyl group of methionine in methionine-containing peptides with turnover number of larger than 20. In these hydrolytic reactions, the two Pd(II) ions are synergic; one Pd(II) ion anchors to the side chain of methionine and the other one delivers hydroxo group or aqua ligand to carbonyl carbon of methionine, or acts as a Lewis acid to activate the carbonyl group of methionine, resulting in cleavage of Met-X bond. The binding constant of dinuclear Pd(II) complex cations with AcMet-Gly and AcMet were determined by 1H NMR titration to be 282 +/- 2 M(-1) and 366 +/- 4 M(-1), respectively. The relatively low binding constants enable the catalytic cycle and the possible catalytic mechanism is proposed. This is the first artificial mimic of metallopeptidases with two metal active centers.     

一维链状冠醚配合物[k(18-C-6)]~2[M(NO~2)~4](H~2O)(M=Pd,Pt) 的合成与结构

研究了18-C-6分别与k~2[Pd(NO~2~4],k~2[Pt(NO~2)~4])的反应,并通过元素分析、红外光谱、单晶X射线衍射对生成的配合物[k(18-C-6)]~2[Pd(NO~2)~4](H~2O)~0.5(1)和[k(18-C-6)]~2,k~2[Pt(NO~2)~4])(H~2O)(2)进行了表征,两个配合匀匀为单斜晶系,空间P2~1/c.1的晶体学数据：α=1,7104(3),c=1,5763(3)nm,β=93.49(3)°,V=3.9987(14)nm^3,Z=4,D~c=1.507g/cm^3,F(000)=1880,R~1=0.0681,~wR~2=0.1004。2的晶体学数据：a=1.1312(3)nm,b=1.4227(2)nm,c=1.2266(3)nm,β93.141(10)°,V=1.9711(8)nm^3,Z=4,D~c=1.614g/cm^3,F(000)=936,R~1=0.0265,~wR~2=0.0721。在固态,配合物1具有[(18-c-6)]~2[Pd(NO~2)~4](H~2O)(1a)和[(18---c-6)]~2[Pd·(NO~2)~4](1b)两个分子,两者比例这1：1前者相邻的两个分子通过水分是的氧原子相连接形成一维链状结构,后者形面假一维链状结构,在配合物2中相邻的两个分子通过品分子中的氧原子相连接形成一维链状结构。     

Synthesis,Structure and Noncovalent Interactions Palladium（Ⅱ）Complexes with N—Benzoyl—β—phenylalaniate Dianion and Aromatic Diimine

Two palladium(II) complexes, [Pd(bipy)(BzPhe‐N,O)] and [Pd(phen)(BzPhe‐N,O)]·4H₂O were synthesized by reactions between Pd(bipy)Cl₂ and BzPheH₂ (N‐benzoyl‐β‐phenylalanine), Pd(phen) Cl₂ and BzPheH₂ in water at pH‐9, with their structures determined by X‐ray diffraction analysis. The Pd atom is coordinated by two nitrogen atoms of bipy (or phen), the deprotonated amido type nitrogen atom and one of the carboxylic oxygens of BzPhe (BzPhe = N‐benzoyl‐β‐phenylalaninate dianion). In the complex [Pd(phen) (BzFne‐N,O)] · 4H₂O, the side chain of phenylalanine is located above and approximately parallels to the coordination plane. Both the aromatic‐aromatic stacking interaction between the phenyl ring of phenylalanine and phen, and the metal ion‐aromatic interaction between the phenyl ring of phenylalanine and Pd(II) were observed. [Pd(bipy)(BzPhe‐N,O)] has the phenylalanyl side chain oriented outwards from the coordination plane, which is mainly due to the interaction between the carbonyl oxygen atom of the amido group and the phenyl ring of phenylalanine. The reason for the different orientation of phenylalanyl side chain in the complexes was suggested.     

A Motif for Infinite Metal Atom Wires

A new motif for infinite metal atom wires with tunable compositions and properties is developed based on the connection between metal paddlewheel and square planar complex moieties. Two infinite Pd chain compounds, [Pd₄(CO)₄(OAc)₄Pd(acac)₂] 1 and [Pd₄(CO)₄(TFA)₄Pd(acac)₂] 2 , and an infinite Pd? Pt heterometallic chain compound, [Pd₄(CO)₄(OAc)₄Pt(acac)₂] 3 , are identified by single‐crystal X‐ray diffraction analysis. In these new structures, the paddlewheel moiety is a Pd four‐membered ring coordinated by bridging carboxylic ligands and μ₂ carbonyl ligands. The planar moiety is either Pd(acac)₂ or Pt(acac)₂ (acac=acetylacetonate). These moieties are connected by metallophilic interactions. The results showed that these one‐dimensional metal wire compounds have photoluminescent properties that are tunable by changing ligands and metal ions. 3 can also serve as a single source precursor for making Pd₄Pt bimetallic nanostructures with precise control of metal composition.     

Tetrapalladium complex with bridging germylene ligands. Structural change of the planar Pd4Ge3 core

A complex with a planar hexagonal Pd(4)Ge(3) core, [Pd{Pd(dmpe)}(3)(μ(3)-GePh(2))(3)], was synthesized and characterized by X-ray and NMR measurements as well as by DFT calculations. 4-tert-Butylbenzenethiol converted the Pd(4) complex into a hexapalladium complex, [{Pd(3)(μ-GePh(2))(2)(μ-H)(μ(3)-GePh(2)(SC(6)H(4)(t)Bu-4))}(2)(μ-dmpe)], composed of two Pd(3)Ge(3) units bridged by a dmpe ligand. The addition of CuI or AgI to the Pd(4) complex yielded [Pd(μ-MI){Pd(dmpe)}(3)(μ(3)-GePh(2))(3) ] (M = Cu, Ag), in which Cu or Ag bridges a Pd-Pd bond of the Pd(4)Ge(3) core. The CuI adducts in solution undergo a pivot motion of the CuI on the surface of the Pd(4)Ge(3) plane on the NMR time scale.     

The aerobic oxidation of a Pd(II) dimethyl complex leads to selective ethane elimination from a Pd(III) intermediate

Oxidation of the Pd(II) complex (N4)Pd(II)Me(2) (N4 = N,N'-di-tert-butyl-2,11-diaza[3.3](2,6)pyridinophane) with O(2) or ROOH (R = H, tert-butyl, cumyl) produces the Pd(III) species [(N4)Pd(III)Me(2)](+), followed by selective formation of ethane and the monomethyl complex (N4)Pd(II)Me(OH). Cyclic voltammetry studies and use of 5,5-dimethyl-1-pyrroline-N-oxide (DMPO) as a spin trap suggest an inner-sphere mechanism for (N4)Pd(II)Me(2) oxidation by O(2) to generate a Pd(III)-superoxide intermediate. In addition, reaction of (N4)Pd(II)Me(2) with cumene hydroperoxide involves a heterolytic O-O bond cleavage, implying a two-electron oxidation of the Pd(II) precursor and formation of a transient Pd(IV) intermediate. Mechanistic studies of the C-C bond formation steps and crossover experiments are consistent with a nonradical mechanism that involves methyl group transfer and transient formation of a Pd(IV) species. Moreover, the (N4)Pd(II)Me(OH) complex formed upon ethane elimination reacts with weakly acidic C-H bonds of acetone and terminal alkynes, leading to formation of a new Pd(II)-C bond. Overall, this study represents the first example of C-C bond formation upon aerobic oxidation of a Pd(II) dimethyl complex, with implications in the development of Pd catalysts for aerobic oxidative coupling of C-H bonds.     

EPR investigations on radiation induced chemical transformations in Pd(ClO4)2/i-PrOH/HClO4 system from 77 to 300 K

The EPR studies have been carried out on gamma irradiated samples of Pd(ClO4)2 in 9 M/4M HClO4 in the presence and absence of isopropanol [i-PrOH (5%, v/v)], in the temperature range of 77-300 K. The EPR studies revealed the formation of Pd+ complex, Pd3+ complex and several radicals such as H., OH., ClO3., ClO4. and O3- on radiolysis of these systems. Reduction of Pd2+ to Pd clusters could not be observed in the absence of i-PrOH and warming of the irradiated sample finally resulted in recovery of Pd2+ complex. However, in the presence of 5% i-PrOH, strongly oxidizing radicals like OH., ClO3. and ClO4. are suppressed and (CH3)2C.OH radical was produced along with reducing species like H.. EPR spectra in these strongly reducing conditions showed formation of Pd+ complex, which on heating above 230 K, disproportionated into Pd0 and Pd2+ complex and finally lead to formation of Pd metal aggregates. Simultaneously, pulse radiolysis technique has been employed as an alternative method to verify the EPR observations.     

Metal "capture" by a heterotrimetalloligand, heterometallic d(10)-d(10) interactions, and unexpected iron-to-platinum silyl ligand migration: a combined experimental and theoretical study

The heterotrinuclear chain complex Hg[Fe{Si(OMe)(3)}(CO)(3)(dppm-P)](2) (dppm = Ph(2)PCH(2)PPh(2)) 1 which has a transoid arrangement of the phosphine donors was used as a versatile chelating metallodiphosphine ligand owing to the easy rotation of its metal core about the Fe-Hg sigma-bonds. Its reaction with the labile Pt(0) olefin complex [Pt(C(7)H(10))(3)] yielded [HgPt{Si(OMe)(3)}Fe(2)(CO)(6){Si(OMe)(3)}(mu-dppm)(2)] 5 which resulted, after coordination of the dangling phosphine donors to Pt, from an unprecedented intramolecular rearrangement involving a very rare example of silyl ligand migration between two different metal centers, and the first one in metal cluster chemistry. The major structural differences observed between the heterometallic complexes obtained from 1 and d(10) Cu(I), Pd(0), or Pt(0) precursors have been established by X-ray diffraction. The bonding situation in the silyl migrated Pt complex 5 was analyzed and compared to those in the isoelectronic, but structurally distinct complexes obtained from Cu(I) and Pd(0) precursors, [Hg{Fe[Si(OMe)(3)](CO)(3)(mu-dppm)}(2)Cu](+) (2) and [Hg{Fe[Si(OMe)(3)](CO)(3)(mu-dppm)}(2)Pd] (4), respectively, by means of extended Hückel interaction diagrams. DFT calculations then allowed the energy minima associated with the three structures to be compared for 2, 4, and 5. All three minima are in close competition for the Pd complex 4, but silyl migration is favored by approximately 10 kcal mol(-)(1) for 5, mainly due to the more electronegative character of Pt with respect to Pd.     

Di- and tetranuclear palladium complexes incorporating phospha- and diphosphaferrocenes as ligands

Monophosphaferrocenes and 4 react with [Pd(COD)Cl2] (COD = cyclooctadiene) to afford cis- [Pd(1 or 4)2Cl2] complexes that slowly decompose in solution to give dimeric complexes 3 and 6 of general formula [[Pd(1 or 4)Cl]2]. In these dimers, which incorporate a Pd-Pd bond, phosphaferrocenes act as four electron donors through the phosphorus-atom lone pair (mu2-bonded) and through one orbital of appropriate symmetry at iron. These dimers can also be more conventionally prepared from the reaction of cis- [Pd(1 or 4) Cl2] complexes with [Pd(dba)2] (dba = dibenzylidene acetone). The reaction of octaethyldiphosphaferrocene (7) with [Pd(COD)Cl2] yields a dinuclear complex [Pd2(7)2Cl4] (8) in which the two ligands 7 are coordinated in a trans fashion through the phosphorus-atom lone pairs. Decomposition of 8 in solution yields a dimeric dicationic complex of general formula [[Pd2(7)2Cl]2]2+[FeCl4]2- (9a) incorporating four palladium atoms. In each ligand. one phospholyl ring behaves as a two-electron donor through the phosphorus-atom lone pair whereas the second binds two palladium centers in a mu2-fashion. A plausible mechanism that explains the formation of dimers 3, 6, and 9a involves the preliminary oxidation of the mono- or diphosphaferrocene ligand. Parallel experiments aimed at confirming this hypothesis have shown that complex 9a can be synthesized from the reaction of FeCl2 with complex 8. Also presented is another synthetic approach to the synthesis of the tetranuclear complex 9b (counterion is GaCl4-) from the reaction of the palladium(0) complex [Pd(7)2] (10) with [Pd(COD)Cl2] the presence of GaCl3 as chloride abstractor.     

Interaction of palladium(II) and platinum(II) complexes with microperoxidase-11 studied by electrospray mass spectrometry and MS/MS analysis

Interactions of cis-[Pd(en)(H(2)O)(2)](2+) (en, ethylenediamine) and cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) with microperoxidase-11 (MP-11) in a molar ratio of 1:1 or 2:1 at pH 1.4 were investigated via electrospray mass spectrometry and MS/MS analysis at room temperature and at 40 degrees C with an incubation time of 2 or 3 days. The composition of the Pd(II)- and Pt(II)-anchored MP-11 was confirmed on the basis of the precise molecular mass and the simulated isotope distribution pattern. MS/MS analysis revealed that the Pd(II) center anchored to the side chain of Cys7 as Pd(II) and MP-11 were mixed in an equimolar ratio and to side chains of Cys7 and Cys4 as Pd(II) and MP-11 mixed in a 2:1 molar ratio. When Pt(II) and MP-11 were mixed in a 2:1 molar ratio, Pt(II) first anchored to the side chain of Cys7, and then to the side chain of Cys4 with time. The initial coordination of Pd(II) and Pt(II) to the side chain of Cys7 is the essential step for the Pd(II)- and Pt(II)-promoted cleavage of the His8-Thr9 bond in MP-11. These results support the hypothesis that the Pd(II)-mediated cleavage of the His18-Thr19 bond in cytochorome c is due to the identical binding mode.     

Mechanism of extraction of the palladium(ii) thiocyanate complex by polyether foam

The mechanism of sorption of the palladium(II) thiocyanate complex by polyether-type Polyurethane foam has been investigated. At low thiocyanate concentration, palladium is most likely extracted as Pd(SCN)(2). The results obtained in the presence of enough thiocyanate for formation of the Pd(SCN)(4)(2-) complex are in disagreement with several possible mechanisms for sorption of the anionic metal complex by the foam, such as adsorption, solvent extraction, ligand addition or exchange, and weak or strong base anion-exchange. The extraction of Pd(SCN)(4)(2-) at high pH increased in the order Li(+)< Na(+) < Cs(+)< Rb(+) < K(+)< NH(4)(+) which is in good relation with the "cation-chelation" mechanism. This mechanism was also found predominant in the extraction of Pd(SCN)(4)(2-) complex from hydrochloric acid solutions.     

Architectural formation of a conjugated bimetallic Pd(II) complex via oxidative complexation and a tetracyclic Pd(II) complex via self-assembling complexation

The conjugated homobimetallic palladium(II) complex [(L1)Pd(qd)Pd(L1)] (qd = quinonediimine) was obtained in a one-pot reaction by the in-situ oxidative complexation of 1,4-phenylenediamine with the palladium(II) complex [(L1)Pd(MeCN)] (H2L1 = N,N'-bis(2-phenylethyl)-2,6-pyridinedicarboxamide) while in the absence of an additional ligand [(L1)Pd(MeCN)] was converted to the amide-bridged macrocyclic tetramer [Pd(L1)]4.     

Combined use of platinum(II) complexes and palladium(II) complexes for selective cleavage of peptides and proteins

This study shows, for the first time, the advantages of combining two transition-metal complexes as selective proteolytic reagents. In this procedure, cis-[Pt(en)(H(2)O)(2)](2+) is followed by [Pd(H(2)O)(4)](2+). In the peptide AcAla-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala, the Pt(II) reagent cleaves the Met6-Ala7 peptide bond, whereas the Pd(II) reagent cleaves the Gly4-Gly5 bond. In the peptide AcVal-Lys-Gly-Gly-His-Ala-Lys-Tyr-Gly-Gly-Met-Ala-Ala-Arg-Ala, the Pt(II) reagent cleaves the Met11-Ala12 peptide bond, whereas the Pd(II) reagent cleaves the Gly3-Gly4 bond. All cleavage reactions are regioselective and complete at pH 2.0 and 60 degrees C. Each metal ion binds to an anchoring side chain and then, as a Lewis acid, activates a proximal peptide bond toward hydrolysis by the solvent water. The selectivity in cleavage is a consequence of the selectivity in this initial anchoring. Both Pt(II) and Pd(II) reagents bind to the methionine side chain, whereas only the Pd(II) reagent binds to the histidine side chain under the reaction conditions. Consequently, only methionine residues direct the cleavage by the Pt(II) reagent, whereas both methionine and histidine residues direct the cleavage by the Pd(II) reagent. The Pt(II) reagent cleaves the first bond downstream from the anchor, i.e., the Met-Z bond. The Pd(II) reagent cleaves the second bond upstream from the anchor, i.e., the X-Y bond in the X-Y-Met-Z and in the X-Y-His-Z segments. The diethylenetriamine complex [Pt(dien)(H(2)O)](2+) cannot promote cleavage. Its prior binding to the Met11 residue in the second peptide prevents the Pd(II) reagents from binding to Met11 and cleaving the Gly9-Gly10 bond and directs the cleavage by the Pd(II) reagent exclusively at the Gly3-Gly4 bond. Our new method was tested on equine myoglobin, which contains 2 methionine residues and 11 histidine residues. The complete methionine-directed cleavage of the Met55-Lys56 and Met131-Thr132 bonds by the Pt(II) reagent produced three fragments, suitable for various biochemical applications because they are relatively long and contain amino and carboxylic terminal groups. The deliberately incomplete histidine-directed cleavage of the long fragments 1.55 and 56.131 at many sites by the Pd(II) reagent produced numerous short fragments, suitable for protein identification by mass spectrometry. The ability of combined Pt(II) and Pd(II) complexes to cleave proteins with explicable and adjustable selectivity and with good yields bodes well for their greater use in biochemical and bioanalytical practice.     

The Novel Benzo-15-Crown-5 with Palladium(II) Complex:[Na(B15C5)]2[Pd(SCN)4]

A novel Pd(II) Benzo-15-crown-5 complex [Na(B15C5)]2[Pd(SCN)4] has been isolated and characterized by IR and X-ray diffraction analysis.The crystal structure belongs to monoclinic,space group P21/n with cell dimensions,a=1.0164(6),b=1.3743(3),c=1.4987(7) nm,b=95.248(6)o ,V=2.0847nm3,Z=2,F(000)=944,R=0.053,Rw=0.072.The compound consists of two [Na(B15C5)]+ complex cations and a [Pd(SCN)4]2- complex anion.Each sodium ion is coordinated by five crown ether oxygen atoms and one N atom from the SCN group of [Pd(SCN)4]2- to form stable neutral complex.     

Platinum and palladium complexes of thiosemicarbazones derived of 2-acetylthiophene: Synthesis and spectral studies

The reaction of 2-acetylthiophene thiosemicarbazone (2-HATT) and 2-acetylthiophene 4-phenylthiosemicarbazone (2-HAT-4-FT) with Pd(COD)Cl(2) (COD = 1,5-cyclooctadiene) and trans-Pt(2)PEt(3)Cl(4) yielded four new metal complexes: [Pd(2-HATT)Cl(2)] (1), [Pd(2-ATT)(2)] (2), [Pd(2-AT-4-FT)Cl] (3) and [Pt(2-ATT)(PEt(3))Cl] (4). Apart from compound 3 all the others were characterised by (1)H and (13)C{(1)H} NMR, infrared spectroscopy, and elemental analysis. Multinuclear NMR experiments of (31)P{(1)H} and (195)Pt{(1)H} of complex 4 have revealed that the ligand 2-HATT behaves as a bidentate chelating agent towards Pd(COD)Cl(2) and trans-Pt(2)PEt(3)Cl(4) whereas ligand 2-HAT-4-FT forms a tridentate chelating complex with Pd(COD)Cl(2).     

COMPLEX SALTS [Pd(NH3)4][Pd(NH3)3NO2] [CrOx3]·H2O AND [Pd(NH3)4][Pd(NH3)3NO2] [CoOx3]·H2O AND SOLID SOLUTIONS [Pd(NH3)4] [Pd(NH3)3NO2][CoOx3]x[RhOx3]1–x·H2O : PROMISING PRECURSORS FOR POROUS NANOALLOYS

Journal of Structural Chemistry - New complex salts [Pd(NH3)4][Pd(NH3)3NO2][CrOx3]·H2O I, [Pd(NH3)4][Pd(NH3)3NO2][CoOx3]·H2O II, and a series of solid solutions...     

Pd0 mechanism of palladium-catalyzed cyclopropanation of alkenes by CH2N2: a DFT study

Pathways for the reaction of ethene with diazomethane to cyclopropane and dinitrogen catalyzed by Pd(0) complexes have been investigated at the B3LYP level of theory. The computed Gibbs free activation energy of 71.7 kJ mol(-1) for the most favorable catalytic cycle is by far lower than previously reported computed barriers for Pd(II)-catalyzed pathways of this reaction and is now in the range of experimental expectations. Pd(eta(2)-C(2)H(4))(2) is predicted to be the resting state of the catalyst and the product of a Pd(OAc)(2) precatalyst reduction. The Pd(0) ethene complex is in equilibrium with Pd(eta(2)-C(2)H(4))(kappaC-CH(2)N(2)), from which N(2) is eliminated in the rate-determining step. The resulting carbene complex (eta(2)-C(2)H(4))Pd=CH(2) reacts without intrinsic barrier with CH(2)N(2) to Pd(eta(2)-C(2)H(4))(2) and N(2) and with ethene to the palladacyclobutane (eta(2)-C(2)H(4))Pd(II)[kappaC(1),kappaC(3)-(CH(2))(3)]. The N(2) elimination from Pd(eta(2)-C(2)H(4))(2)(kappaC-CH(2)N(2)) to (eta(2)-C(2)H(4))(2)Pd=CH(2) leads to an overall Gibbs free activation energy of 84.2 kJ mol(-1). The intramolecular rearrangement of (eta(2)-C(2)H(4))(2)Pd=CH(2) to the palladacyclobutane (eta(2)-C(2)H(4))Pd(II)[kappaC(1),kappaC(3)-(CH(2))(3)] and the subsequent reductive elimination of cyclopropane are facile. At the BP86 level of theory, Pd(0) preferentially coordinates three ligands. Pd(eta(2)-C(2)H(4))(3) is predicted to be the resting state, and the N(2) elimination from the model complex Pd(eta(2)-C(2)H(4))(2)(kappaC-CH(2)N(2)) is the rate-determining transition state leading to an overall Gibbs free activation energy of 69.4 kJ mol(-1).     

Formation and coordination modes of the C4E4 moiety (E = COOMe) bound to two palladium(II) moieties

The transmetallation of the palladacyclopentadiene complex Pd{C(COOMe)C(COOMe)C(COOMe)C(COOMe)}(bipy) with the dicationic Pd(II) complex [Pd(bipy)(CH(3)CN)(2)][BF(4)](2) afforded a terminally σ-palladated diene complex [Pd(2){μ-η(1):η(1)-C(COOMe)C(COOMe)C(COOMe)C(COOMe)}(bipy)(2)(CH(3)CN)(2)][BF(4)](2). It was revealed by X-ray crystallographic analysis that replacement of the acetonitrile ligands in a terminally σ-palladated diene complex with PPh(3) ligands resulted in the conformation change of the σ-palladated diene moiety from skewed s-cis to planar s-trans. Treatment of a bis-triphenylphosphine dipalladium complex [Pd(2)(PPh(3))(2)(CH(3)CN)(4)][PF(6)](2) with dimethoxyacetylene dicarboxylate (DMAD) (1 equiv.) in acetonitrile resulted in the insertion of DMAD to the Pd-Pd bond to afford [Pd(2){μ-η(1):η(1)-C(COOMe)C(COOMe)}(PPh(3))(2)(CH(3)CN)(4)][PF(6)](2). Addition of the second DMAD gave the ylide-type complex [Pd(2){μ-η(2):η(3)-C(COOMe)C(COOMe)C(COOMe)C(COOMe)(PPh(3))}(PPh(3))(2)(CH(3)CN)(3)][PF(6)](2) of which the structure was determined by X-ray crystallographic analysis.