Ansa-tris(allyl) complexes of alkali metals: tripodal analogues of cyclopentadienyl and ansa-metallocene ligands

Alkali metal complexes of two types of ansa-tris(allyl) ligand are reported; a monoanionic ansa-tris(allyl) ligand containing tin(II) is formally valence isoelectronic to the cyclopentadienyl ligand and a trianionic ansa-tris(allyl) ligand containing silicon(IV) is formally valence isoelectronic to an ansa-metallocene ligand; the potential wider use of these tripodal ligands in coordination chemistry is discussed.     

Development of Rapid and Facile Solid-Phase Synthesis of PROTACs via a Variety of Binding Styles

Optimizing linker design is important for ensuring efficient degradation activity of proteolysis-targeting chimeras (PROTACs). Therefore, developing a straightforward synthetic approach that combines the protein-of-interest ligand (POI ligand) and the ligand for E3 ubiquitin ligase (E3 ligand) in various binding styles through a linker is essential for rapid PROTAC syntheses. Herein, a solid-phase approach for convenient PROTAC synthesis is presented. We designed azide intermediates with different linker lengths to which the E3 ligand, pomalidomide, is attached and performed facile PROTACs synthesis by forming triazole, amide, and urea bonds from the intermediates.     

Use of Crown Ether Functions as Secondary Coordination Spheres for the Manipulation of Ligand–Metal Intramolecular Electron Transfer in Copper–Guanidine Complexes

Intramolecular electron transfer (IET) between a redox-active organic ligand and a metal in a complex is of fundamental interest and used in a variety of applications. In this work it is demonstrated that secondary coordination sphere motifs can be applied to trigger a radical change in the electronic structure of copper complexes with a redox-active guanidine ligand through ligand–metal IET. Hence, crown ether functions attached to the ligand allow the manipulation of the degree of IET between the guanidine ligand and the copper atom through metal encapsulation.     

Influence of ligand density on antibody binding capacity of cation-exchange adsorbents

Adsorption properties of a set of polymethacrylate-based cation exchangers designed for purification of monoclonal antibodies were investigated. The materials differed significantly in the density of sulphoisobutyl ligand groups. The ligand density had a pronounced effect on the static adsorption capacity of a polyclonal human immunoglobulin G. An optimal ligand density was observed at any pH and NaCl concentration tested when sharp optima were observed at low pH and ionic strength values. This was caused by effective clogging of pore mouth at high ligand densities. An anomalous effect of ionic strength was observed for the adsorbents with the high ligand density when the adsorption capacity increased with the addition of NaCl at low pH.     

Ion exchange chromatography of monoclonal antibodies: Effect of resin ligand density on dynamic binding capacity

Dynamic binding capacity (DBC) of a monoclonal antibody on agarose based strong cation exchange resins is determined as a function of resin ligand density, apparent pore size of the base matrix, and protein charge. The maximum DBC is found to be unaffected by resin ligand density, apparent pore size, or protein charge within the tested range. The critical conductivity (conductivity at maximum DBC) is seen to vary with ligand density. It is hypothesized that the maximum DBC is determined by the effective size of the proteins and the proximity to which they can approach one another. Once a certain minimum resin ligand density is supplied, additional ligand is not beneficial in terms of resin capacity. Additional ligand can provide flexibility in designing ion exchange resins for a particular application as the critical conductivity could be matched to the feedstock conductivity and it may also affect the selectivity.     

Surface ligand dynamics in growth of nanocrystals

Amine ligands were identified to bond on the surface of CdSe nanocrystals in a dynamic fashion under elevated temperatures in the reproducible growth domain of the specific designed growth reactions. The surface ligand dynamics was found to strongly depend on the growth temperature, the ligand concentration, and the ligand chain length. The strong chain-length dependence was originated from the interligand interactions in the ligand monolayer of a nanocrystal, provided fatty amines being weak ligands for CdSe nanocrystals. When the growth reaction was above the boiling point of an amine ligand, the surface ligand dynamics was violent, a quasi-gas-phase state, indicated by strong temperature-dependent and fast growth rates of the nanocrystals. Approximately below its boiling point, a significantly weak temperature dependence of the growth rate of the nanocrystals associated with the quasi-liquid state of the surface ligands was observed. A direct result of studying the surface ligand dynamics of this well-established nanocrystal system was the formation of high-quality CdSe nanocrystals under much reduced temperature, 150 degrees C, in comparison to the standard 250-350 degrees C temperature range. This was achieved by using fatty amines with a short hydrocarbon chain at a low ligand concentration in the solution. Preliminary results indicate that a similar temperature (160 degrees C) also worked for the growth of InP nanocrystals.     

Chiral pyranoside phosphite-oxazolines: a new class of ligand for asymmetric catalytic hydrogenation of alkenes

We have described the first successful application of a phosphite-oxazoline ligand library in the asymmetric Ir-catalyzed hydrogenation of several unfunctionalized olefins. The introduction of a bulky biaryl phosphite moiety in the ligand design is highly adventitious in the product outcome. By carefully selecting the ligand components, we obtained high activities (TOFs up to >1500 mol x (mol x h)(-1) at 1 bar of H2) and enantioselectivities (ee values up to >99%) and, at the same time, show a broad scope for different substrate types. So, this is an exceptional ligand class that competes favorably with a few other ligand series that also provide high ee values for tri- and disubstituted substrate types.     

On the mechanism of the palladium-catalyzed tert-butylhydroperoxide-mediated Wacker-type oxidation of alkenes using quinoline-2-oxazoline ligands

The mechanism of the tert-butylhydroperoxide-mediated, Pd(Quinox)-catalyzed Wacker-type oxidation was investigated to evaluate the hypothesis that a selective catalyst-controlled oxidation could be achieved by rendering the palladium coordinatively saturated using a bidentate amine ligand. The unique role of the Quinox ligand framework was probed via systematic ligand modifications. The modified ligands were evaluated through quantitative Hammett analysis, which supports a "push-pull" relationship between the electronically asymmetric quinoline and oxazoline ligand modules.     

Further improvement on sulfonamide-based ligand for catalytic asymmetric 2-haloallylation and allylation

The sulfonamide-based ligand B was found to exhibit an outstanding crystallinity and perform well as a ligand for Cr-mediated catalytic asymmetric 2-haloallylation and allylation. The new ligand has an appealing advantage over the first generation ligand; its high crystallinity allows effective recovery of the ligand from a reaction in a pure form.     

分离尿激酶的胍基型亲和色谱填料研究

尿激酶的精制一般使用亲和色谱法［’－‘ｊ．目前实际使用和文献报道最多的填料是在 ＳｅＰｈａｒｏｓｅ上键合对氨基苯眯（ｐ－ＡＢＺ）制得的［‘ｊ．这种填料分高效果较好,但机械强度不高,只能用于常压色谱,而且寿命较短．前文［‘１报道了用 ＳｅＰｈａｒｏｓｅ和聚甲基丙烯酸环氧丙酯微球为基质, Ｐ－ＡＢＺ为配基分离尿激酶的亲和色谱填料的对照研究．本文报道以含肥基的有机小分子为配基,ＳｅＰｈａｒｏｓｅ及两种聚甲基丙烯酸环氧丙酯微球为基质的分离尿激酶色谱填料的合成和性能试验．发现肥基己酸和精氨酸为配基的亲和色谱…     

Reactions of coordinated molecules : III. Alkoxy substituent exchange reactions on a cyclic ligand

The extraction of an ethoxide anion from a β-diethylacetal-acyl ligand of a neutral organometallic molybdenum complex affords a cationic complex having a cyclic ligand which is described best as a metal-stabilized oxonium ion. This ligand has an unusually reactive saturated carbon atom which reacts with a variety of alcohols and with ethanethiol via an alkoxy group exchange reaction affording a differently substituted cyclic ligand. The oxidization of the metal—ligand bond in the initial complex forms 4-ethoxy-γ-butyrolactone and, therefore, it is a precursor for the preparation of a variety of 4-substituted-γ-butyrolactones. The reaction of this complex with sodium methoxide and dimethyl sulfoxide is discussed, also.     

Ligand effect on the growth and the digestion of Co nanocrystals

The reaction product of cobalt carbonyl decomposition depends on the concentration of the oleic acid ligand. With a low concentration of ligand, nanocrystals nucleate and grow to large ferromagnetic particles through the process of Ostwald ripening and coalescence coarsening. With a high concentration of ligand, stable cluster complexes are formed. Addition or removal of ligand from the reaction products can interchange the formation of cluster complexes and nanocrystals.     

Spatial localization of ligand binding sites from electron current density surfaces calculated from NMR chemical shift perturbations

Rapid, accurate structure determination of protein-ligand complexes is an essential component in structure-based drug design. We have developed a method that uses NMR protein chemical shift perturbations to spatially localize a ligand when it is complexed with a protein. Chemical shift perturbations on the protein arise primarily from the close proximity of electron current density from the ligand. In our approach the location of the center of the electron current density for a ligand aromatic ring was approximated by a point-dipole, and dot densities were used to represent ligand positions that are allowed by the experimental data. The dot density is increased in the region of space that is consistent for the most data. A surface can be formed in regions of the highest dot density that correlates to the center of the ligand aromatic ring. These surfaces allow for the rapid evaluation of ligand binding, which is demonstrated on a model system and on real data from HCV NS3 protease and HCV NS3 helicase, where the location of ligand binding can be compared to that obtained from difference electron density from X-ray crystallography.     

The effect of ligand on the rate of propagation of Cu(0)‐wire catalyzed SET‐LRP of MA in DMSO at 25 °C

The effect of initial ligand concentration on the apparent rate constant of propagation of single‐electron transfer living radical polymerization (SET‐LRP) of MA in DMSO at 25 °C was examined using various lengths of Cu(0) wire as catalyst. It was determined that unlike other parameters such as initiator concentration, solvent concentration, and deactivator concentration, no simple external rate‐order for the ligand concentration could be determined. Rather, the response of the rate of SET‐LRP to initial ligand concentration is complex and is likely determined by a competition of ligand‐dependent extent of disproportionation as well as the role of ligand concentration in the surface mediated activation process. Results suggest that a minimum concentration of ligand is needed to achieve both acceptable reaction rate and reaction control, and therefore, ligand concentration must be considered in designing experimental conditions for SET‐LRP. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5629–5638, 2009     

Imidazole containing ligands for the modulation of physical properties of metal complexes upon (de)protonation

The synthetic route towards a novel tetradentate ligand bearing two amido and imidazole rings is reported. This ligand has been designed to study the relationship between the protonic state of the ligand through the imidazole moieties towards the electronic behaviour of metal complexes.     

Determination of absolute configuration of (pi-allyl) palladium complexes by NMR spectroscopy and stereoselective complexation

The chiral chelating ligand N,N'-bis(phenylethyl)bispidine (1) forms a rigid cavity which accommodates (pi-allyl)palladium species with high selectivity. In the resulting complex, the absolute configuration of the pi-allyl ligand can be determined by the detection in NMR spectra of a few unambiguous interligand NOEs. Dynamic processes involving the pi-allyl ligand can be investigated. Depending on the analytical target, ligand (S,S)-1 or (R,R)-1 may be used.     

含有Pt―Pt键金属配合物的电子结构和二阶非线性光学性质

采用量子化学密度泛函理论(DFT)结合有限场(FF)的方法对一系列含有Pt―Pt键金属配合物的电子结构和二阶非线性光学(NLO)性质进行了理论计算. 结果表明改变共轭配体对Pt―Pt键影响不大. 由配体到Pt―Pt金属基团的电荷转移强度随配体增长而变大. 金属配合物静态一阶超极化率随配体的增长而增大, 配合物电荷的改变基本不影响这类化合物的二阶NLO性质. 具有相对长的共轭配体的配合物IId具有最大的二阶NLO响应. 含时密度泛函理论(TD-DFT)计算表明配合物IId的二阶NLO响应来自于混有配体到金属的配体内的π→π^*电荷转移跃迁的贡献.